Numerical Study of Mode Competition in Coaxial Cavity Gyrotrons with Corrugated Insert

A time-dependent self-consistent multimode code which allows to model the interaction between the modes of a coaxial cavity gyrotron operating at the fundamental and/or at higher harmonics of the cyclotron frequency is presented. The Method of Moments (MoM) is used to obtain a rigorous solution of the eigenvalue problem for a coaxial waveguide with corrugated insert. It is shown that the use of the Surface Impedance Model for the calculation of modes operating at higher harmonics leads to incorrect results in high-power coaxial cavity gyrotrons. However, the numerical simulations based on the MoM agree well with the available experimental results.     

双共焦波导结构二次谐波太赫兹回旋管谐振腔设计

准光共焦波导具有功率容量大、模式密度低的特点,能够有效地减少模式竞争对回旋管互作用的影响,有利于高次谐波太赫兹回旋管的设计.为提高太赫兹准光回旋管的互作用效率,在共焦柱面波导的基础上,研究了一种新型高频互作用结构——双共焦波导结构,设计了一种330 GHz二次谐波双共焦结构回旋管谐振腔并对其进行了理论分析和粒子模拟.研究结果表明,双共焦谐振腔中的高阶模式能够与高次电子回旋谐波发生稳定的相互作用,并且没有模式竞争现象,具备工作在太赫兹波段的潜力.相比普通共焦波导谐振腔,双共焦谐振腔能够增强准光回旋管的注波互作用强度,提高回旋管的输出功率和工作效率.此外,结果还表明双共焦波导中的电磁波模式是一种由两个独立的共焦波导模式叠加而成的混合模式.利用这种混合模式有望实现太赫兹回旋管的单注双频工作,为新型太赫兹辐射源的研究提供了新的途径.     

Design of a 1-MW, CW coaxial gyrotron with two gaussian beam outputs

The design of a 170 GHz, 1 MW-CW gyrotron for electron cyclotron heating of nuclear fusion plasmas is presented. The designed gyrotron incorporates a coaxial cavity to reduce mode competition, and a coaxial electron gun to support the cavity inner conductor. A new mode converter splits the generated wave into two beams and radiates them in different directions. The radiated beams are transmitted to two output windows through two mirror systems, being transformed into Gaussian-like beams. A single-stage depressed collector improves the overall efficiency of the gyrotron and reduces the heat flux to the collector surface.     

全三维110GHz和220GHz同轴腔双注回旋管数值模拟研究

为了打破传统单注回旋管只能产生较低功率的局限性, 本文基于自主研发的PIC粒子模拟软件CHIPIC 对110 GHz和220 GHz同轴腔双注回旋管进行全三维数值模拟研究. 在理论分析同轴双电子注电子枪设计模型和初始参数的基础上通过CHIPIC对其进行优化设计, 得到了具有横纵速度比为1.0, 最大速度零散约为5.4%的高性能电子束; 并将此优化后的双阳极双注电子枪取代传统回旋管数值模拟时采用的回旋 发射进行110 GHz和220 GHz双注回旋管整管的数值模拟, 并采用MPI四进程并行计算, 最终获得了具有双频分别为110 GHz和220 GHz、模式为TE₀₂模、平均输出功率约在70 kW、 效率达到8.75%的高性能双注回旋振荡管. 关键词： 同轴腔双注回旋管 同轴双电子注电子枪 横纵速度比 速度零散     

Experimental investigation of a 140-GHz coaxial gyrotron oscillator

We report experimental results on a megawatt power level, 140-GHz coaxial gyrotron oscillator. The gyrotron has an inverted magnetron injection gun (IMIG) designed for operation at up to 95 kV and 88 A. The IMIG has an inner grounded anode which extends from the center of the gun down through the entire length of the tube including the cavity and collector. The IMIG was tested at up to 105 kV and 93 A in 3 μs pulses, achieving an electron beam power of 10 MW. The output power from the coaxial gyrotron cavity was transported to an internal mode converter and a single mirror that coupled the power out transversely from the tube axis. A maximum output power of up to 1 MW was obtained in the TE_27,11 mode at 142 GHz at an efficiency of 16%, about one half of the design efficiency. The reduced efficiency was attributed to nonuniformity of the cathode emission and the sensitivity to the relative alignment of the electron gun, coaxial insert, and cavity. The cathode emission over the azimuthal angle was measured for two cathodes and was shown to be nonuniform due to both temperature and emitter work function nonuniformity. The gyrotron was also tested in two alternate configurations: 1) with the internal mode converter removed (axial output), and 2) with both the internal converter and the coaxial insert removed (empty cavity). In operation in the empty cavity configuration, which is equivalent to a conventional gyrotron oscillator, output power of up to 0.9 MW was observed     

Multifrequency operation of a gyrotron

One specific example with the parameters close to the existing coaxial cavity gyrotron at the Forschungszentrum Karlsruhe (FZK) is analyzed in detail. Mode competition calculations are performed using the time dependent and self-consistent codes developed both at the FZK and the Institute of Applied Physics (IAP). The results are compared with the calculations performed earlier by one of the authors in the cold cavity approximation. Significant qualitative differences are found and the conclusion is drawn that it is absolutely necessary to use the self-consistent approach in analyzing advanced operation regimes of a gyrotron     

Nonperturbative solutions to cylindrical resonant cavities with dissipative medium and imperfectly conducting walls

Cylindrical waveguides without end surfaces can serve as two-dimensional resonant cavities. In such cavities the electromagnetic oscillations corresponding to an eigenfrequency can always be taken as TM or TE modes even when the walls have a finite conductivity and the medium is absorptive. This paper obtains analytic solutions to the field equations when the cylinder has a circular cross section. Some nonperturbative conclusions are drawn from the eigenvalue equation. Approximate analytic results for the resonant frequencies are obtained when the absorption of the medium is small and the walls are good conductors. Stability of the eigen modes is discussed. Similar results for the coaxial line are presented.     

Gyrokinetics of Coaxial-Cavity Electron Cyclotron Maser

Based on the gyrokinetics of free-electron masers, the energy-transfer rate and starting current are derived for a coaxial-cavity electron cyclotron maser (gyrotron oscillator) with the misalignment of the inner-rod axis to the outer-cavity axis taken into account. The effect of the finite cavity length is included in the derivation. The stable term of the instability which results from the contribution of the guiding-center distribution is of significance, although it is usually neglected in a cylindrical-cavity gyrotron. It is found that the structure misalignment has more serious influence on the performance of the coaxial cavity gyrotron than the beam misalignment.     

回旋管同轴谐振腔模式的选择

 为了研究回旋管工作模式的选择机理,分析了圆柱波导开放式谐振腔、光滑同轴谐振腔和纵向内开槽同轴谐振腔相应波导的色散特性,进而研究了这些谐振腔内模式竞争的问题。对同轴结构波导色散方程作了相应的数值计算,结果表明,同轴谐振腔利用自身色散曲线与谐振腔内外半径比值的数值关系,能够使在开放式谐振腔内无法工作的高阶模式在其内部稳定工作。最后,以德国卡尔斯鲁厄理工学院(KIT)研制的同轴回旋管为例,进行了相应的分析计算,结果表明纵向内开槽同轴谐振腔相对于光滑同轴谐振腔更适合高阶模式的稳定工作。     

Coaxial resonator for a megawatt 280 GHz gyrotron

To provide the required mode selectivity for a megawatt 280 GHz gyrotron, a coaxial resonator operating in a high order TE mode is considered. Mode discrimination is achieved both by exploring the differences in the transverse structures of the competing modes and investigating a suitable geometry for the coaxial insert. For modes with close eigenfrequencies the associated diffractionQ factors can be widely different in value, thereby ensuring an effective mode selection. In the resonator studied here, the frequency separation between the design mode TE_26,10,1 and its nearest competing mode TE_20,12,1 is about 0.6% and the ratio of the correspondingQ factors is as high as 6.5. Unlike the coaxial resonator, in the hollow cavity without the inner conductor the fundamental spectrum of eigenfrequencies is more dense, and all TE modes within the frequency interval 271–288 GHz have approximately the sameQ factor.