用不同类型的分子筛催化剂催化转化生物油制烯烃

研究了用一系列不同类型的分子筛催化剂催化转化制取低碳烯烃的过程,测试的催化剂包括HZSM-5、MCM-41、SAPO- 34和Y型分子筛．按照低碳烯烃的绝对收率和选择性,催化剂的活性排序为：HZSM-5>SAPO-34>MCM-41>Y型分子筛．研究表明,使用HZSM-5分子筛催化剂,获得的生物油最大低碳烯烃收率约为0.22 kg/(kg生物油),低碳烯烃的选择性约为50%,且生物油几乎实现完全转化．同时还研究了反应条件对生物油制低碳烯烃的影响．为了弄清催化剂结构与和低碳烯烃形成之间的关系,对相关催化剂进行了详细表征,对生物油热裂解和催化裂解过程进行了详细比较．     

生物油催化裂解转化制取三苯

通过不同孔特征的分子筛(HZSM-5、HY沸石和MCM-41)实现生物油催化转化为三苯(苯、甲苯和对甲苯). 基于三苯的产率和选择性,芳香化合物逐次降低顺序为: HZSM-5>MCM-41>HY沸石.用HZSM-5催化裂解生物油产生芳香化合物的最大产率为33.1%,选择性为86.4%. 研究了反应条件对生物油催化裂解的影响,结合催化剂表征结果,讨论了催化剂的结构与性能之间的关系.     

生物质催化转化制取芳香化合物

利用分子筛催化剂(NaZSM-5、HZSM-5、ReY和HY)研究了木屑上催化裂解制取芳香物(苯、甲苯、二甲苯)的反应过程,发现HZSM-5催化剂具有最高的生物质裂解制备芳香化合物的活性. 在450 oC、 载气流速为300 mL/min和催化剂/木屑比为2的优化反应条件下,芳香化合物的产率和选择性分别达到26.5%和62.5C-mol%.     

二氧化硅改性分子筛催化生物质基多元醇制备对二甲苯

本文证明了在二氧化硅改性的分子筛催化作用下,生物质基多元醇(如山梨醇、木糖醇、赤藓糖醇、甘油和乙二醇)可以经过催化裂解、烷基化和异构化等反应,生成高附加值的化学品(对二甲苯).与HZSM-5分子筛催化剂相比,二氧化硅改性的分子筛降低了分子筛催化剂的外表面酸和孔径,从而显著的提高对甲苯的选择性和产率.本文详细讨论了催化剂、甲醇添加剂、反应温度和不同类型多元醇原料对对二甲苯选择性和产率的影响.甲醇的添加促进多元醇催化裂解中的烷基化反应,提高了二甲苯的产率.在15%SiO_2/HZSM-5催化剂作用下,对二甲苯的产率最高可达到10.9 C-mol%,对二甲苯在二甲苯中选择性达到91.1%.本文通过研究相关重要反应和催化剂特性,揭示了生物质基多元醇催化裂解制备对二甲苯的反应路径.     

二氧化硅改性分子筛催化生物质基多元醇制备对二甲苯（英文）

本文证明了在二氧化硅改性的分子筛催化作用下,生物质基多元醇(如山梨醇、木糖醇、赤藓糖醇、甘油和乙二醇)可以经过催化裂解、烷基化和异构化等反应,生成高附加值的化学品(对二甲苯).与HZSM-5分子筛催化剂相比,二氧化硅改性的分子筛降低了分子筛催化剂的外表面酸和孔径,从而显著的提高对甲苯的选择性和产率.本文详细讨论了催化剂、甲醇添加剂、反应温度和不同类型多元醇原料对对二甲苯选择性和产率的影响.甲醇的添加促进多元醇催化裂解中的烷基化反应,提高了二甲苯的产率.在15%SiO_2/HZSM-5催化剂作用下,对二甲苯的产率最高可达到10.9 C-mol%,对二甲苯在二甲苯中选择性达到91.1%.本文通过研究相关重要反应和催化剂特性,揭示了生物质基多元醇催化裂解制备对二甲苯的反应路径.     

水相生物油选择性加氢-催化裂解制取烯烃和芳香烃的试验研究

本文在气相流动反应器中采用ZSM-5催化剂对水相选择性加氢生物油进行了催化裂解试验研究。主要考察了反应温度、质量空速、油分压和原料油组分含量对产物产率和选择性的影响。结果表明,选择性加氢生物油转化为石油化工用品（烯烃和芳香烃）的最优工况为:反应温度,600℃;质量空速,11.7 h^-1;油分压,6693 Pa;油组分含量,12 5%。在此工况下,石油化工用品达到最高碳产率76 0%,其中烯烃57 6%,芳香烃18.4%。烯烃和芳香烃的产率及其主要成分的选择性可以根据市场的需求通过调节反应条件来改变。     

生物油制备生物质氢气和生物质燃料

研究了一种以生物质裂解油为原料制备氢气和生物燃料的催化转化过程。该过程包括生物油催化裂解制备氢气和生物合成气,合成气的调变,烯烃聚合和费脱合成耦合制备生物燃料。在优化反应条件下,氢气产率达到120.9 g H₂/（kg bio-oil）,烯烃聚合-费脱合成耦合反应形成的生物燃料产率达到526.1 g/（kg bio-syngas）。基于产物分析和催化剂特性表征,探讨了生物燃料合成过程中的反应路径和化学反应过程.     

木质素催化转化制取苯、甲苯和二甲苯

对HZSM-5、HY和MCM-22三种催化剂进行了比较, 其中HZSM-5催化裂解木质素制备苯、甲苯和二甲苯(BTX)的结果最优．确定了木质素催化裂解的最佳反应条件,包括反应温度、载气流速、催化剂/木质素配比．当反应温度为550～600 oC,载气流速为300 mL/min,催化剂/木质素配比为2时,使用HZSM-5催化裂解制备BTX的最高C产率和芳香选择性分别可达25.3%和90.9%。     

玉米芯流化床快速热解制取生物油试验研究

本文在流化床上对玉米芯进行了快速热解制取生物油的试验研究.首先在非催化条件下考察了温度、气体流量、床高和物料粒径对热解产物产率的影响,得到了制取生物油的最优工况.在此工况下进行了催化热解试验,研究了FCC催化剂对热解产物产率和生物油品质的影响.结果表明,最优工况下生物油产率为56.8%.同未加催化剂相比,FCC催化剂的存在使得生物油中油组分和焦炭的产率降低,不凝结气体、水分和焦的产率增加.分级冷凝系统的应用较好的实现了重油、轻油和水的分离.对催化条件下第二级冷凝器收集的生物油分析表明,其油组分的氧含量和高位热值分别为13.64%和36.7 MJ/kg,具有很好的应用前景.     

水热处理对HZSM-5分子筛催化热解生物质性能的研究

本文利用比表面积测试等手段考察水热氛围对催化剂物理化学性质的影响,并通过Py-GC/MS实验研究水热处理的催化剂对生物质催化热解的效果,研究结果表明:随着水热处理温度的提高,ZSM-5分子筛的比表面积逐渐减小;水热处理对HZSM-5催化剂表面酸性中心密度和活性的优化,催化剂脱氧效果得到增强,温度越高越有利于催化剂表面酸性中心密度和活性的优化,促进热解产物的脱氧和提质,并且改善催化裂解过程中的催化剂结焦现象。     

在Ni/HZSM-5催化剂上低温水蒸汽重整生物油制氢

利用浸渍方法制备的Ni/HZSM-5催化剂在生物油低温水蒸汽重整合成中表现了较高的催化活性． 探讨了催化剂的组成、重整温度、水碳比例对重整过程的影响．在电催化重整研究中,发现催化剂上通过的电流可以显著地促进生物油水蒸汽重整．通过对不同负载量的Ni/HZSM-5催化剂和Ni₂₀/Al₂O₃催化剂的催化活性的比较,NiO在催化剂中负载量为20%(Ni₂₀/ZSM)时表现出了最高的催化活性; 即使在450 oC时, 在Ni₂₀/ZSM催化剂上也可以达到碳转化率接近完全, 氢气产率约为90%的效果． 利用XRD、ICP/AES、H₂-TPR、BET等表征手段对Ni/HZSM-5催化剂的形态和结构进行了表征.     

生物质气经由二甲醚两步法制备低碳烯烃

制备出NiSAPO-34及NiSAPO-34/HZSM-5催化剂,考察了其对二甲醚催化转化制备低碳烯烃的性能．利用Cu/Zn/Al/HZSM-5和筛选出的2%NiSAPO-34/HZSM-5催化剂进行生物质气经由二甲醚两步法制备低碳烯烃的实验, 结果表明在SAPO-34上添加2%的Ni不改变其结构, 但降低了酸中心数量, 并生成了较强的酸中心． 添加少量具有稳定酸中心的HZSM-5, 该催化剂的活性提高到3 h以上, 反应进行2 h获得了最高的低碳烯烃选择性为90.8%． 当把该催化剂应用到两步催化转化过程的第二个反应器中, 其高催化活性可达5 h以上． 当以低氢碳比生物质气(H₂/CO/CO₂/N₂/CH₄=41.5/26.9/14.2/14.6/2.89)作为原料时,经两步转化,低碳烯烃的收率达到84.6 g/m³_syngas．     

The cracking of n-heptane in the gas phase state and in the HZSM-5 zeolite: a quantum molecular dynamics study

Quantum molecular dynamics is used to investigate the cracking of a representative hydrocarbon of the paraffin family (n-heptane), analysing the effects of temperature in the fragmentation of n-heptane when this compound is in the gas phase and inside a typical industrial catalyst (zeolite HZSM-5). The hydrocarbon structural and electronic features in the two environments are determined and compared. The results substantiate current views and exhibit the basic aspects in the cracking of n-heptane.     

Study of the conversion of methanol to dimethyl ether on zeolite HZSM-5 using in situ flow MAS NMR

The conversion of methanol to gasoline (MTG) range hydrocarbons on zeolite catalyst HZSM-5 has been studied extensively using solid-state NMR. We have studied the reaction under batch and flow conditions using an isolated flow variable-temperature (VT) MAS NMR probe. This probe was developed to study heterogeneous catalysis reactions in situ at temperatures greater than 300 degrees C with reactant flow. In the batch studies, when 13C-labeled methanol was adsorbed on zeolite HZSM-5, sealed, and heated to 250 degrees C, dimethyl ether was formed. Two-dimensional exchange NMR shows that dimethyl ether was in equilibrium with methanol at 250 degrees C. When 13C-methanol was flowed over HZSM-5 at temperatures > or = 200 degrees C, only dimethyl ether was observed. Between 160 degrees C and 200 degrees C, both methanol and dimethyl ether were observed. The flow results are significant in that they suggest that there is no equilibrium between methanol and dimethyl ether in the catalyst at high temperatures, and that surface methoxy groups do not exist on the catalyst at high temperatures.     

Floating double probe characteristics of non-thermal plasmas in the presence of zeolite

The combination of catalyst and non-thermal plasmas has led to some unusual chemical behaviors, especially with zeolite catalyst. A mechanism has been proposed to explain the observed interaction between catalyst and non-thermal plasmas. This mechanism includes two aspects: plasma promoted or induced catalysis and catalyst enhanced non-equilibrium of non-thermal plasmas. In this paper, we present some direct experimental evidence for the catalyst (zeolite)-enhanced non-equilibrium of non-thermal plasmas suggesting the use of zeolite increases, significantly, the electron temperature of non-thermal plasmas, while the gas temperature remains unchanged. A floating double-probe characteristic has been utilized to measure the electron temperature. Compared to the case without zeolite, the electron temperature of non-thermal plasmas with Mo-Zn/HZSM-5 increases up to 250%, while, at the same time, the discharge power reduces 58%, compared to that without zeolite.     

Nanocrystalline zeolite beta and zeolite Y as catalysts in used palm oil cracking for the production of biofuel

Nanocrystalline zeolites with crystal size smaller than 100 nm are potential replacement for conventional zeolite catalysts due to their unique characteristics and advantages. In this study, the synthesis of nanocrystalline zeolite Y (FAU) and nanocrystalline zeolite beta (BEA) under hydrothermal conditions is reported. The effect of crystal size on the physico-chemical characteristics of the zeolite, Y (FAU), and beta (BEA) is reported. The properties of nanocrystalline zeolites Y and Beta with crystal size around 50 nm are compared with the microcrystalline zeolite Y and microcrystalline zeolite beta, respectively. The performance of the nanocrystalline zeolite as a catalyst was investigated in the cracking of used palm oil for the production of biofuel. The nanocrystalline zeolite catalytic activity was compared with the activity of microcrystalline zeolite in order to study the effect of crystal size on the catalytic activity. Both nanocrystalline zeolites gave better performance in terms of conversion of used palm oil as well as selectivity for the formation of gasoline fraction. The increase in surface area and improved accessibility of the reactant in nanocrystalline zeolites enhanced the cracking activity as well as the desired product selectivity.