带故障小修的多状态单部件可修系统的预防维修策略

This paper deals with a one-unit repairable system with a good state and A failurestates.For this system we consider a preventive maintenance policy with minimal re-pair at failure.When the system life distribution and all the repair time d(?)stributionsare arbitrary,using the supplementary variable method we obtain system availabilityand discuss the optimum policy maximizing the availability.     

GENERAL DECAY FOR A QUASILINEAR SYSTEM OF VISCOELASTIC EQUATIONS WITH NONLINEAR DAMPING

In this paper, we consider a system of coupled quasilinear viscoelastic equations with nonlinear damping. We use the perturbed energy method to show the general decay rate estimates of energy of solutions, which extends some existing results concerning a general decay for a single equation to the case of system, and a nonlinear system of viscoelastic wave equations to a quasilinear system.     

正交共轭滤波器的构造

It is very importent for generating an orthonormal multiwavelet system to construct a conjugate quadrature filter(CQF). In this paper, a general method of deriving a length-L 1 conjugate quadrature filter from a length-L conjugate quadrature filter and vice versa is obtained. As a special case, we study generally the construction of any length-L 1 compactly supported symmetric-antisymmetric orthonormal multiwavelet system with multiplicity 2 from a length-L multiwavelet system and vice versa. Examples of conjugate quadrature filter are given.     

ON MONOTONE METHOD FOR NONLINEAR REACTION-DIFFUSION SYSTEM

If we knew the existence of upper and lower solutions u, v of a coupled reaction-diffusion system with quasi-monotone nonlinear reaction functions, then we can prove the existence of a solution ω of the same system such that u<ω相似文献   

一类非最小相位随机系统的离散自适应滑动模态控制

This paper presents the discrete adaptive sliding mode control of input-output non-minimum phase system in the presence of the stochastic disturbance. The non-minimum phase system can be transformed into a minimum phase system by a operator. According to the minimum phase system, the controller and the adaptive algorithm we designed ensures the stability of system and holds that the mean-square deviation from the sliding surface is minimized.     

一个最优的模糊逼近器

In a dot product space with the reproducing kernel (r. k. S. ) ,a fuzzy system with the estimation approximation errors is proposed ,which overcomes the defect that the existing fuzzy control system is difficult to estimate the errors of approximation for a desired function,and keeps the characteristics of fuzzy system as an inference approach. The structure of the new fuzzy approximator benefits a course got by other means.     

RELIABILITY ANALYSIS OF A SYSTEM IN A RANDOMLY CHANGING ENVIRONMENT

In reliability analysis of a repairable system,it is usually assumed that the system operates in aconstant environment.In fact,it needn't be so.For example,environment may have different stresslevels,and the lifelength of a repairable system under these stresses might differ from each other,too.In this paper,we present a reliability analysis of a repairable system whose life length is changingwith environment.     

Carleman Estimates for Parabolic Equations with Nonhomogeneous Boundary Conditions

The authors prove a new Carleman estimate for general linear second order parabolic equation with nonhomogeneous boundary conditions. On the basis of this estimate, improved Carleman estimates for the Stokes system and for a system of parabolic equations with a penalty term are obtained. This system can be viewed as an approximation of the Stokes system.     

QUADRATIC SYSTEMS WITH A 3RD-ORDER (OR 2ND-ORDER) WEAK FOCUS

1 IntroductionSince a quadratic system has no limit cycle around a 3rd-order weak focu,[1]and has at most one limit cycle surrounding a 2nd-order weak fOcus['], study-ing the number of limit cycles of a p1anar quadratic system with a 3rd-order(or 2nd-order) weak focus we only need to study the number of limit cyclessurrounding the strong focus for the system. Without loss of generality thequadratic system with a 3rd--order (or 2nd--order) weak foclls and a strong focuscan be written in the fo.…     

约束的NLS系统的刚体型Poisson结构

A constrained system associated with a 3×3 matrix spectral problem of the nonlinear Schrodinger(NLS) hierarchy is proposed. It is shown that the constrained system is a Hamiltonian system with the rigid body type Poisson structure on the Poisson manifold R3N. Further, the reduction of the constrained system extended to the common level set of the complex cones is proved to be the constrained AKNS system on C2N.     

Robust tube-based MPC of constrained piecewise affine systems with bounded additive disturbances

In this article, we propose a robust tube-based MPC formulation for a class of hybrid systems, namely autonomously switched PWA systems, with bounded additive disturbances. The term tube-based refers to those control techniques whose objective is to maintain all possible trajectories of the uncertain system inside a tube which is a set around the nominal (or reference) system trajectory, that is free from disturbances. Common methods in tube-based control systems consider an error dynamical system as the difference between the state of the nominal system and the state of the perturbed system. However, this definition of the error dynamical system leads to a complicated switched affine system for PWA systems. Therefore, we use a new notion of the reference system similar to the nominal system except that the switching between the various modes of the PWA system is driven by the state of the real system. Using this reference system instead of the nominal system leads us to an error dynamical system that can be modeled as a switched linear system. We employ a switched linear controller to stabilize this error system under arbitrary switching. This auxiliary controller forces the states of the uncertain system to remain in a tube confined to the invariant set around the state of the reference system. We add new constraints and tighten some other constraints of the nominal hybrid MPC for the reference system, in order to ensure convergence of the uncertain system and to guarantee robust exponential stability of the closed-loop system.     

Singularity Structure of Third-Order Dynamical Systems. II

The singularity structure of the solutions of a general third-order system, with polynomial right-hand sides of degree less than or equal to two, is studied about a movable singular point. An algorithm for transforming the given third-order system to a third-order Briot–Bouquet system is presented. The dominant behavior of a solution of the given system near a movable singularity is used to construct a transformation that changes the given system directly to a third-order Briot–Bouquet system. The results of Horn for the third-order Briot–Bouquet system are exploited to give the complete form of the series solutions of the given third-order system; convergence of these series in a deleted neighborhood of the singularity is ensured. This algorithm is used to study the singularity structure of the solutions of the Lorenz system, the Rikitake system, the three-wave interaction problem, the Rabinovich system, the Lotka–Volterra system, and the May–Leonard system for different sets of parameter values. The proposed approach goes far beyond the ARS algorithm.     

Optimal burn-in for maximizing reliability of repairable non-series systems

Burn-in is a manufacturing process applied to products to eliminate early failures in the factory before the products reach the customers. Various methods have been proposed for determining an optimal burn-in time of a non-repairable system or a repairable series system, assuming that system burn-in improves all components in the system. In this paper, we establish the trade-off between the component reliabilities during system burn-in and develop an optimal burn-in time for repairable non-series systems to maximize reliability. One impediment to expressing the reliability of a non-series system is in that successive failures during system burn-in cannot be described precisely because a failed component is not detected until the whole system fails. For approximating the successive failures of a non-series system during system burn-in, we considered two types of repair: minimal repair at the time of system failure, and repair at the time of component or connection failure. The two types of repair provide bounds on the optimal system burn-in time of non-series systems.     

Finite-dimensional representation of delay systems

It is shown that given a state delayed system, one can construct a finite-dimensional system whose partial state replicates the response of the delay system up to a small solution of the homogeneous delay system. Thus, in the absence of small solutions, the response of the delay system can be exactly replicated by a finite-dimensional system. reserved.     

Randomized system trajectories

The notion of system trajectory of a time-varying input-output, dynamical system is reviewed. By introducing a probability measure on a class of such systems a stochastic system, the randomized system, is defined. The randomized system has a trajectory induced by the trajectories of the original systems. A theorem is proved giving fairly general conditions under which the randomized system trajectory is generated by a strongly continuous semigroup of bounded linear operators in a Banach space. An example is presented for a system represented by a quadratic integral operator.Research supported in part by National Science Foundation under Grant No. ECS-8005960.     

非线性方程组的一种解法

文中给出了求非线性方程组的一种解法；它找到一个变换，可使原方程组变换成一个新的方程组，通过求变换后方程组的解求得原方程组的解．     

On a Stochastic Survival Model for a System Under Randomly Variable Environment

In many cases, the survival probability of a system depends not only on the intrinsic characteristic of the system itself but also on the randomly variable external environment under which the system is being operated. In this paper we study a stochastic survival model for a system under random shock process which affects the survival of the system in a complicated way. The lifetime distribution of the system is derived, and the effect of environmental factors on the failure process of the system is also investigated.     

Bifurcation of limit cycles at the equator

This paper studies center conditions and bifurcation of limit cycles from the equator for a class of polynomial differential system of order seven. By converting real planar system into complex system, we established the relation of focal values of a real system with singular point quantities of its concomitant system, and the recursion formula for the computation of singular point quantities of a complex system at the infinity. Therefore, the first 14 singular point quantities of a complex system at the infinity are deduced by using computer algebra system Mathematica. What’s more, the conditions for the infinity of the real system to be a center or 14 degree fine focus are derived, respectively. A system of order seven that bifurcates 12 limit cycles from the infinity is constructed for the first time.     

An efficient coding methods for the two composition types of the Korean alphabet on a MasPar machine

There are two types of composition systems for the Korean alphabet: a combined system and a composite system. This paper describes an efficient coding method for both of these two types. Using this coding method, with the combined system yields about 10.5% code-length savings per a Korean character, while it yields about 45% savings with the composite system. In other words, the coding method produces a better result (i.e. 34.5% better) with the composite system than with the combined system. The simulation has been performed on a MasPar machine having 64 processors. The results show that the combined system achieved a 45.851-fold speedup while the composite system achieved a 47.274-fold speedup.     

Reduced systems in Markov chains and their applications in queueing theory

A reduced system is a smaller system derived in the process of analyzing a larger system. While solving for steady-state probabilities of a Markov chain, generally the solution can be found by first solving a reduced system of equations which is obtained by appropriately partitioning the transition probability matrix. In this paper, we catagorize reduced systems as standard and nonstandard and explore the existence of reduced systems and their properties relative to the original system. We also discuss first passage probabilities and means for the standard reduced system relative to the original system. These properties are illustrated while determining the steady-state probabilities and first passage time characteristics of a queueing system.