首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
本文应用主成分析的基本方法,结合单质量特性的工序能力指数,给出了多质量特性的主成份的工序能力指数。  相似文献   

2.
多元Cp值     
本文给出了多元工序能力指数C_p的定义,有关分布,置信下限和判断工序是否有能力的临界值,可用来对多质量特性工序能力作统计推断。  相似文献   

3.
产品设计与质量控制的动态因素模型(上)   总被引:2,自引:1,他引:1  
本文介绍产品设计与质量控制的新思想,从产品的设计、生产和使用的角度来研究影响产品质量的所有因素,把它们看成是一个随机过程,提出了动态因素产品设计与质量控制的数学模型。文中把过程能力指数的要领推广到了特性能力指数函数,用于统一地来衡量产品的设计质量、生产质量和使用质量;给出了以特性能力指数函数为变量的产品动态质量损失和产品技术损失的概念,并为组成产品的原材料或零部件达到一致寿命的最经济设计提供了一种理论和方法。  相似文献   

4.
过程能力指数已广泛地应用于度量和评价过程性能。使用各种标准能力指数的先决条件是测量数据相互独立,且服从正态分布;然而,对流程性材料生产过程,测量数据往往不满足应用过程能力指数的条件。本文根据确定过程能力指数的基本思想,提出了拓广的过程能力指数Cpp,以给出流程性材料过程性能的评价方法,并通过具体事例证实了这种方法的可行性和有效性。  相似文献   

5.
一类基于非对称偏差的过程能力指数   总被引:3,自引:0,他引:3  
以基本尺寸为基准,研究非对称偏差下总体质量特性值的分布及过程离散程度,在给出一类非对称分布的基础上,研究基于非对称偏差的过程能力指数,并将其推广到角度质量控制问题。  相似文献   

6.
针对传统的过程能力分析仅以生产线中某一单一的生产工序(过程)为对象这一问题,将影响产品质量的所有生产过程视为一个过程网络,根据Taguchi田口方法,阐述了过程能力指数与质量损失的关系,给出了生产制造过程网络过程能力指数的计算方法.进一步应用PERT/CPM的基本思想,建立了生产制造过程网络关键质量链的规划模型,将质量损失最大的路径视为关键质量链.通过实例分析表明,以上方法改进了传统的统计质量控制和分析方法,能够有效地实现过程网络的质量管理.  相似文献   

7.
自1980年以来, 分析过程能力的统计方法有显著的进展, 已在实践中得到大量应用\bd 过程能力指数是衡量生产过程中的产品尺寸适合规格限和接近目标值的能力. 最普遍使用的能力指数是$c_p$和$c_{pk}$,这些指数曾被广泛地应用于日本、美国和英国的各工业公司和企业. 本文对这些指数提出根据子样本估计标准差、能力指数及其置信区间的简单近似方法  相似文献   

8.
自1980年以来,分析过程能力的统计方法有显著的进展,已在实践中得到大量应用.过程能力指数是衡量生产过程中的产品尺寸适合规格限和接近目标值的能力.最普遍使用的能力指数是cp和cpk,这些指数曾被广泛地应用于日本、美国和英国的各工业公司和企业.文中对这些指数提出根据子样本估计标准差、能力指数及其置信区间的简单近似方法.  相似文献   

9.
研究基于各类计算非正态条件下过程能力指数方法的有效性,采用蒙特卡洛方法,通过建立各方法的仿真模型,模拟仿真并比较各方法的性能优劣.仿真结果显示,Johnson转换法较Box-Cox转换法具有更加广泛的适用范围,并在绝大多数参数取值范围内具有优越性.偏态过程能力指数Cs由于不受数据分布类型的影响,在实际生产中具有较高的应用范围.最后利用研究对焊机关键质量特性进行实证分析,并验证了方法的有效性与可行性.  相似文献   

10.
一、问题的提出 在工业产品质量的统计控制中,通常用字母σ表示生产过程的标准差;用距加工中心正负三个生产过程的标准差(即6σ)来描述工序能力,表示产品质量特性值约有99.73%集中在此范围内;而产品的技术要求同工序能力之比则称为工序能力指数.当产品质量特性值分布中心规范界  相似文献   

11.
12.
We study a class of self-similar processes with stationary increments belonging to higher order Wiener chaoses which are similar to Hermite processes. We obtain an almost sure wavelet-like expansion of these processes. This allows us to compute the pointwise and local Hölder regularity of sample paths and to analyse their behaviour at infinity. We also provide some results on the Hausdorff dimension of the range and graphs of multidimensional anisotropic self-similar processes with stationary increments defined by multiple Wiener–Itô integrals.  相似文献   

13.
It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.  相似文献   

14.
Schr(o)dinger operator is a central subject in the mathematical study of quantum mechanics.Consider the Schrodinger operator H = -△ V on R, where △ = d2/dx2 and the potential function V is real valued. In Fourier analysis, it is well-known that a square integrable function admits an expansion with exponentials as eigenfunctions of -△. A natural conjecture is that an L2 function admits a similar expansion in terms of "eigenfunctions" of H, a perturbation of the Laplacian (see [7], Ch. Ⅺ and the notes), under certain condition on V.  相似文献   

15.
As early as in 1990, Professor Sun Yongsheng, suggested his students at Beijing Normal University to consider research problems on the unit sphere. Under his guidance and encouragement his students started the research on spherical harmonic analysis and approximation. In this paper, we incompletely introduce the main achievements in this area obtained by our group and relative researchers during recent 5 years (2001-2005). The main topics are: convergence of Cesaro summability, a.e. and strong summability of Fourier-Laplace series; smoothness and K-functionals; Kolmogorov and linear widths.  相似文献   

16.
张丽娜  吴建华 《数学进展》2008,37(1):115-117
One of the most fundamental problems in theoretical biology is to explain the mechanisms by which patterns and forms are created in the'living world. In his seminal paper "The Chemical Basis of Morphogenesis", Turing showed that a system of coupled reaction-diffusion equations can be used to describe patterns and forms in biological systems. However, the first experimental evidence to the Turing patterns was observed by De Kepper and her associates(1990) on the CIMA reaction in an open unstirred reactor, almost 40 years after Turing's prediction. Lengyel and Epstein characterized this famous experiment using a system of reaction-diffusion equations. The Lengyel-Epstein model is in the form as follows  相似文献   

17.
18.
19.
20.
<正>Submission Authors must use LaTeX for typewriting,and visit our website www.actamath.com to submit your paper.Our address is Editorial Office of Acta Mathematica Sinica,Academy of Mathematics and Systems Science,Chinese Academy of Sciences,Beijing 100190,P.R.China.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号