Biomagnetic viscoelastic fluid flow over a stretching sheet

Of concern in this paper is an investigation of biomagnetic flow of a non-Newtonian viscoelastic fluid over a stretching sheet under the influence of an applied magnetic field generated owing to the presence of a magnetic dipole. The viscoelasticity of the fluid is characterised by Walter’s B fluid model. The applied magnetic field has been considered to be sufficiently strong to saturate the ferrofluid. The magnetization of the fluid is considered to vary linearly with temperature as well as the magnetic field intensity. The theoretical treatment of the physical problem consists of reducing it to solving a system of non-linear coupled differential equations that involve six parameters, which are solved by developing a finite difference technique. The velocity profile, the skin-friction, the wall pressure and the rate of heat transfer at the sheet are computed for a specific situation. The study shows that the fluid velocity increases as the rate of heat transfer decreases, while the local skin-friction and the wall pressure increase as the magnetic field strength is increased. It is also revealed that fluid viscoelasticity has an enhancing effect on the local skin-friction. The study will have an important bearing on magnetic drug targeting and separation of red cells as well as on the control of blood flow during surgery.     

Lie group analysis of unsteady MHD three dimensional by natural convection from an inclined stretching surface saturated porous medium

Lie group method is investigated for solving the problem of heat transfer in an unsteady, three-dimensional, laminar, boundary-layer flow of a viscous, incompressible and electrically conducting fluid over inclined permeable surface embedded in porous medium in the presence of a uniform magnetic field and heat generation/absorption effects. A uniform magnetic field is applied in the y-direction and a generalized flow model is presented to include the effects of the macroscopic viscous term and the microscopic permeability of porous medium. The infinitesimal generators accepted by the equations are calculated and the extension of the Lie algebra for the problem is also presented. The restrictions imposed by the boundary conditions on the generators are calculated. The investigation of the three-independent-variable partial differential equations is converted into a two-independent-variable system by using one subgroup of the general group. The resulting equations are solved numerically with the perturbation solution for various times. Velocity, temperature and pressure profiles, surface shear stresses, and wall-heat transfer rate are discussed for various values of Prandtl number, Hartmann number, Darcy number, heat generation/absorption coefficient, and surface mass-transfer coefficient.     

Hamilton体系辛半解析法及在非均匀电磁波导中的应用

力学中的Hamilton体系需用对偶变量来描述,而电磁场正好有电场和磁场这一对对偶变量．尝试将力学中的Hamilton体系理论应用于电磁波导的分析,以横向电场和磁场作为对偶变量,将电磁波导的基本方程导向辛几何的形式．基于Hamilton变分原理, 导出横向离散的半解析系统方程, 保持体系的辛结构．以非均匀波导为例, 求解了方程的辛本征值问题, 计算结果与解析解相当吻合．     

Combined effect of magnetic field and heat absorption on unsteady free convection and heat transfer flow in a micropolar fluid past a semi-infinite moving plate with viscous dissipation using element free Galerkin method

The fully developed electrically conducting micropolar fluid flow and heat transfer along a semi-infinite vertical porous moving plate is studied including the effect of viscous heating and in the presence of a magnetic field applied transversely to the direction of the flow. The Darcy-Brinkman-Forchheimer model which includes the effects of boundary and inertia forces is employed. The differential equations governing the problem have been transformed by a similarity transformation into a system of non-dimensional differential equations which are solved numerically by element free Galerkin method. Profiles for velocity, microrotation and temperature are presented for a wide range of plate velocity, viscosity ratio, Darcy number, Forchhimer number, magnetic field parameter, heat absorption parameter and the micropolar parameter. The skin friction and Nusselt numbers at the plates are also shown graphically. The present problem has significant applications in chemical engineering, materials processing, solar porous wafer absorber systems and metallurgy.     

Numerical investigation of transient heat transfer to hydromagnetic channel flow with radiative heat and convective cooling

This present study consists of a numerical investigation of transient heat transfer in channel flow of an electrically conducting variable viscosity Boussinesq fluid in the presence of a magnetic field and thermal radiation. The temperature dependent nature of viscosity is assumed to follow an exponentially model and the system exchanges heat with the ambient following Newton’s law of cooling. The governing nonlinear equations of momentum and energy transport are solved numerically using a semi-implicit finite difference method. Solutions are presented in graphical form and given in terms of fluid velocity, fluid temperature, skin friction and heat transfer rate for various parametric values. Our results reveal that combined effect of thermal radiation, magnetic field, viscosity variation and convective cooling have significant impact in controlling the rate of heat transfer in the boundary layer region.     

Biomagnetic fluid flow over a stretching sheet with non linear temperature dependent magnetization

The flow of a heated ferrofluid over a linearly stretching sheet is studied in the pres- ence of an applied magnetic field due to a magnetic dipole. It is assumed that the applied magnetic field is sufficiently strong to saturate the ferrofluid and the variation of magnetization with temperature can be approximated by a non linear function of temperature difference. By introducing appropriate non dimensional variables the problem is described by a coupled and non linear system of ordinary differential equations with its boundary conditions which is solved numerically by applying an efficient numerical technique based on the common finite difference method. The obtained results are presented graphically for different values of the parameters entering into the problem under consideration and the dependence of the flow field from these parameters is discussed. A comparative study, with a similar problem which has already been solved and documented in literature, is also made wherever necessary, emphasizing the impor- tance of the non-linear variation of magnetization with temperature. Emphasis is also given in the obtained results for Prandtl number equal to 21 and critical exponent = 0.368 which are important and interesting in Biomagnetic Fluid Dynamics.     

Biomagnetic fluid flow over a stretching sheet with non linear temperature dependent magnetization

The flow of a heated ferrofluid over a linearly stretching sheet is studied in the pres- ence of an applied magnetic field due to a magnetic dipole. It is assumed that the applied magnetic field is sufficiently strong to saturate the ferrofluid and the variation of magnetization with temperature can be approximated by a non linear function of temperature difference. By introducing appropriate non dimensional variables the problem is described by a coupled and non linear system of ordinary differential equations with its boundary conditions which is solved numerically by applying an efficient numerical technique based on the common finite difference method. The obtained results are presented graphically for different values of the parameters entering into the problem under consideration and the dependence of the flow field from these parameters is discussed. A comparative study, with a similar problem which has already been solved and documented in literature, is also made wherever necessary, emphasizing the impor- tance of the non-linear variation of magnetization with temperature. Emphasis is also given in the obtained results for Prandtl number equal to 21 and critical exponent = 0.368 which are important and interesting in Biomagnetic Fluid Dynamics.     

Heat transfer by magnetohydrodynamic laminar flow in circular pipe

This paper presents the influence of magnetic field on heat due to viscous and electrical dissipations for an incompressible, viscous, electrically conducting fluid through a circular pipe in the presence of an applied (transverse) uniform magnetic field. The walls of the pipe are assumed to be non-conducting and kept at uniform temperature gradient in one case and at a constant temperature gradient in another case. The heat equation governing the present problem is solved exactly in hypergeometric series. The temperature at the centre of the pipe T_e, unweighted mean temperature T_m and weight mean temperature T_M are calculated. The temperature profiles are shown graphically for different values of Hartmann number M, Brinkman number B_r and a non-dimensional number S. Numerical calculations are made for the Nusselt number and are entered in the table.     

Heat and mass transfer in MHD non-Darcian flow of a micropolar fluid over a stretching sheet embedded in a porous media with non-uniform heat source and thermal radiation

A mathematical analysis has been carried out to study magnetohydrodynamic boundary layer flow, heat and mass transfer characteristic on steady two-dimensional flow of a micropolar fluid over a stretching sheet embedded in a non-Darcian porous medium with uniform magnetic field. Momentum boundary layer equation takes into account of transverse magnetic field whereas energy equation takes into account of Ohmic dissipation due to transverse magnetic field, thermal radiation and non-uniform source effects. An analysis has been performed for heating process namely the prescribed wall heat flux (PHF case). The governing system of partial differential equations is first transformed into a system of non-linear ordinary differential equations using similarity transformation. The transformed equations are non-linear coupled differential equations which are then linearized by quasi-linearization method and solved very efficiently by finite-difference method. Favorable comparisons with previously published work on various special cases of the problem are obtained. The effects of various physical parameters on velocity, temperature, concentration distributions are presented graphically and in tabular form.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with non-uniform heat source/sink

This paper presents the study of momentum and heat transfer characteristics in a hydromagnetic flow of viscoelastic liquid over a stretching sheet with non-uniform heat source, where the flow is generated due to a linear stretching of the sheet and influenced by uniform magnetic field applied vertically. Here an analysis has been carried out to study the effect of magnetic field on the visco-elastic liquid flow and heat transfer over a stretching sheet with non-uniform heat source. The non-linear boundary layer equation for momentum is converted into ordinary differential equation by means of similarity transformation and is solved exactly. Heat transfer differential equation is also solved analytically. The effect of magnetic field on velocity, skin friction and temperature profiles are presented graphically and discussed.     

A numerical solution of magneto-thermoelastic problem in non-homogeneous isotropic cylinder by the finite-difference method

This paper presents the development of the magneto-thermoelastic problem in non-homogeneous isotropic cylinder in a primary magnetic field when the curved surface of the cylinder subject to certain boundary conditions. The governing coupled linear partial differential equations in the hyperbolic-type have been solved numerically using the finite-difference method. Graphical results for the temperature, displacement and components of stresses are illustrated and discussed for copper-like material. The results indicate that the effects of inhomogeneity and magnetic field are very pronounced. Some more interesting particular cases have also been discussed.     

Hydromagnetic stability of convective flow of variable viscosity fluids generated by internal heat sources

The stability of convective motion of a variable viscosity fluid contained in a vertical layer generated by uniformly distributed internal heat sources in the presence of a transverse magnetic field is studied. The viscosity of the fluid is assumed to depend on the temperature. The undisturbed steady state motion is assumed to consist of purely vertical motion with a nonlinear temperature distribution across the layer. The equations were solved by the spectral collocation method. The results show that thermal running waves are the most unstable modes and dominate the shear modes when the viscosity decreases.     

Perturbation analysis of unsteady magnetohydrodynamic convective heat and mass transfer in a boundary layer slip flow past a vertical permeable plate with thermal radiation and chemical reaction

An analytical study for the problem of unsteady mixed convection with thermal radiation and first-order chemical reaction on magnetohydrodynamics boundary layer flow of viscous, electrically conducting fluid past a vertical permeable plate has been presented. Slip boundary condition is applied at the porous interface. The classical model is used for studying the effect of radiation for optically thin media. The non-linear coupled partial differential equations are solved by perturbation technique. The results obtained show that the velocity, temperature and concentration fields are appreciably influenced by the presence of chemical reaction, thermal stratification and magnetic field. It is observed that the effect of thermal radiation and magnetic field decreases the velocity, temperature and concentration profiles in the boundary layer. Also, the effects of the various parameters on the skin-friction coefficient and the rate of heat transfer at the surface are discussed.     

Hydromagnetic stability of convective flow of variable viscosity fluids generated by internal heat sources

The stability of convective motion of a variable viscosity fluid contained in a vertical layer generated by uniformly distributed internal heat sources in the presence of a transverse magnetic field is studied. The viscosity of the fluid is assumed to depend on the temperature. The undisturbed steady state motion is assumed to consist of purely vertical motion with a nonlinear temperature distribution across the layer. The equations were solved by the spectral collocation method. The results show that thermal running waves are the most unstable modes and dominate the shear modes when the viscosity decreases.     

Magnetohydrodynamic non-Darcy mixed convection heat transfer from a vertical heated plate embedded in a porous medium with variable porosity

A numerical model is developed to study magnetohydrodynamics (MHD) mixed convection from a heated vertical plate embedded in a Newtonian fluid saturated sparsely packed porous medium by considering the variation of permeability, porosity and thermal conductivity. The boundary layer flow in the porous medium is governed by Forchheimer–Brinkman extended Darcy model. The conservation equations that govern the problem are reduced to a system of non-linear ordinary differential equations by using similarity transformations. Because of non-linearity, the governing equations are solved numerically. The effects of magnetic field on velocity and temperature distributions are studied in detail by considering uniform permeability (UP) and variable permeability (VP) of the porous medium and the results are discussed graphically. Besides, skin friction and Nusselt number are also computed for various physical parameters governing the problem under consideration. It is found that the inertial parameter has a significant influence in increasing the flow field and the rate of heat transfer for variable permeability case. The important finding of the present work is that the magnetic field has considerable effects on the boundary layer velocity and on the rate of heat transfer for variable permeability of the porous medium. Further, the results obtained under the limiting conditions were found to be in good agreement with the existing ones.     

Hiemenz flow and heat transfer of a third grade fluid

The laminar flow and heat transfer of an incompressible, third grade, electrically conducting fluid impinging normal to a plane in the presence of a uniform magnetic field is investigated. The heat transfer analysis has been carried out for two heating processes, namely, (i) with prescribed surface temperature (PST-case) and (ii) prescribed surface heat flux (PHF-case). By means of the similarity transformation, the governing non-linear partial differential equations are reduced to a system of non-linear ordinary differential equations and are solved by a second-order numerical technique. Effects of various non-Newtonian fluid parameters, magnetic parameter, Prandtl number on the velocity and temperature fields have been investigated in detail and shown graphically. It is found that the velocity gradient at the wall decreases as the third grade fluid parameter increases.     

Hydromagnetic non-Darcy flow and heat transfer over a stretching sheet in the presence of thermal radiation and Ohmic dissipation

Non-Darcy flow and heat characteristics over a stretching sheet is presented here by taking into account of Ohmic dissipation and thermal radiation effects. The governing fundamental equations are first transformed into system of ordinary differential equations using self-similarity transformation and they are then solved numerically by using the fifth-order Runge–Kutta–Fehlberg method with shooting technique for some values of the physical parameters. Important features of the flow and heat transfer characteristic for different values of thermal radiation, magnetic and electric fields are analyzed and discussed. Favorable comparisons with previously published work on various special cases of the problem are obtained. Numerical results for the velocity and temperature profiles for a prescribed magnetic field and electric field parameter as well as the development of the local skin-friction coefficient and local Nusselt number with radiation parameters are reported graphically for various parametric conditions to show interesting aspects of the numerical solution.     

纳米流体流经热分层线性多孔伸展平面时的MHD自然对流及其Lie对称群变换

就不可压缩粘性纳米流体,流经半无限垂直伸展平面并计及热分层时,研究该流体的MHD自然对流和热交换.通过特定形式的Lie对称群变换,即单参数群变换,将所考虑问题的偏微分控制方程变换为常微分方程组.然后,使用基于打靶法的Runge Kutta Gill法进行数值求解.最后得到结论:流场、温度和纳米颗粒体积率受热分层和磁场的影响很显著.     

Inhibition or enhancement of chaotic convection via inclined magnetic field

In this paper, we investigate the onset of convection in a horizontal layer of fluid which is heated from the underside. An inclined magnetic field is applied to the layer. The Galerkin truncated approximations were used to obtain a Lorenz-like model. The nonlinear system was solved by the fourth-order Runge–Kutta method. The results show that the Hartmann number and the angle of inclination of the magnetic field could inhibit or enhance the onset of chaotic convection.     

NSM solution for unsteady MHD Couette flow of a dusty conducting fluid with variable viscosity and electric conductivity

The effects of dependence on temperature of the viscosity and electric conductivity, Reynolds number and particle concentration on the unsteady MHD flow and heat transfer of a dusty, electrically conducting fluid between parallel plates in the presence of an external uniform magnetic field have been investigated using the network simulation method (NSM) and the electric circuit simulation program Pspice. The fluid is acted upon by a constant pressure gradient and an external uniform magnetic field perpendicular is applied to the plates. We solved the steady-state and transient problems of flow and heat transfer for both the fluid and dust particles. With this method, only discretization of the spatial co-ordinates is necessary, while time remains as a real continuous variable. Velocity and temperature are studied for different values of the viscosity and magnetic field parameters and for different particle concentration and upper wall velocity.