Two-boundary problems for a Poisson process with exponentially distributed component

For a Poisson process with exponentially distributed negative component, we obtain integral transforms of the joint distribution of the time of the first exit from an interval and the value of the jump over the boundary at exit time and the joint distribution of the time of the first hit of the interval and the value of the process at this time. On the exponentially distributed time interval, we obtain distributions of the total sojourn time of the process in the interval, the joint distribution of the supremum, infimum, and value of the process, the joint distribution of the number of upward and downward crossings of the interval, and generators of the joint distribution of the number of hits of the interval and the number of jumps over the interval. __________ Translated from Ukrains’kyi Matematychnyi Zhurnal, Vol. 58, No. 7, pp. 922–953, July, 2006.     

Optimization of axisymmetric membrane shells

Problems of the joint optimization of the shape and distribution along the meridian of the thickness of membrane shells of revolution under the action of axisymmetric loads are considered, taking account of the constraints concerning the strength of the shell and the volume of its cavity. General formulations of problems of the optimal design of shells of revolution are given and the optimal shape of a shell and the corresponding thickness distribution are investigated. Results of the exact solution of problems of the optimal design of closed shells of revolution when there is an internal pressure are presented. The simultaneous introduction of two control functions, describing the shape of the shell and the distribution of its thickness, not only ensures a substantial reduction in the mass of a shell but also leads to significant mathematical simplifications, which enable the solution of the optimization problem being considered to be obtained in an analytical form.     

基于加总和乘积的方差分解法及其应用

研究了加总式和乘积式的方差分解问题,证明了在因变量等于各自变量之和的条件下,因变量方差等于各自变量与因变量的协方差之和;在因变量等于各自变量之乘积的条件下,因变量对数值的方差等于各自变量对数值与因变量对数值的协方差之和．以中国31个省份2005－2012年的居民人均收入及其影响因素的统计数据资料为例,说明了加总式和乘积式的方差分解法的具体应用．     

Geometry of a five link mechanism with two degrees of freedom

The paper is devoted to the solution of straight and inverse geometrical tasks of five link mechanism with two degrees of freedom. The solution of the mentioned problem is very important in order to determine kinematic parameters of actuators. The problem can be divided into two parts. The first part is considered when we are given the coordinates of the output link of the mechanism and the necessity arises of determining the angles of rotation of actuators. On the other hand, it is very important to determine the position of the output link when the angles of rotation of the actuators are known. Here we consider that the mechanism is composed only of five classes of rotating kinematic pairs and the actuators are situated at the junctions of frames and links of the examined mechanism. The solution of the said problem is based on utilization of homogenous coordinates. On the basis of the obtained equations of motion, one can calculate the trajectories of motion of the output link as well angles of rotation of the actuators by taking into consideration preliminary given kinematic parameters of the mechanism. Here we also obtain equations for calculating values of speed and acceleration of the links of the mechanism. The calculations differ from known methods in simplicity and high performance, which would be useful for programming actuators mounted in the joints of the linkage.     

区间数的绝对值与区间值函数的极限

研究了区间数的绝对值和区间值函数的极限问题.首先,讨论了区间数的H-差的性质,得到了H-差的两个运算法则;然后,给出了区间数的绝对值概念,并讨论了区间数绝对值的性质;最后,借助区间数的H-差和绝对值的概念,建立了区间值函数极限概念的一种新的表达方式,给出了极限存在的充分必要条件,证明了极限值的唯一性及对加法运算和数乘运算的封闭性.     

Algorithm for computing the mechanical impedances of reinforcing ribs of various shapes

The problem is considered of finding the mechanical impedances of reinforcing ribs of various shapes. The rib is modeled by a narrow plate. The thickness of the rib (the thickness of the plate from which the rib is made) is thus considered small as compared with the height of the rib (the width of the plate). The height of the rib h is assumed small as compared with the lengths of waves propagating in the material of the plate. One of the edges of the rib is assumed to be free of stresses. The matrix giving the relation between the stresses and the velocities of displacements on the second (loaded) edge is called the impedance matrix. An algorithm is proposed for computing the coefficients of the expansion of the impedance matrix in a Taylor series in powers of h. The method is illustrated by the computation of the mechanical impedances of rectilinear and annular reinforcing ribs.     

Complexity Estimation for an Algorithm of Searching for Zero of a Piecewise Linear Convex Function

It is known that the problem of the orthogonal projection of a point to the standard simplex can be reduced to solution of a scalar equation. In this article, the complexity is analyzed of an algorithm of searching for zero of a piecewise linear convex function which is proposed in [30]. The analysis is carried out of the best and worst cases of the input data for the algorithm. To this end, the largest and smallest numbers of iterations of the algorithm are studied as functions of the size of the input data. It is shown that, in the case of equality of elements of the input set, the algorithm performs the smallest number of iterations. In the case of different elements of the input set, the number of iterations is maximal and depends rather weakly on the particular values of the elements of the set. The results of numerical experiments with random input data of large dimension are presented.     

On subcritical development of a shear crack in a composite with viscoelastic components

We present results of an investigation of the development of a transverse shear crack in a composite material with linearly viscoelastic components under external shear load. The solution is divided into the following two main stages: determination of the time dependence of the crack tip opening displacement and determination of the crack-growth kinetics as a result of the solution of integral equations. In the first stage, we use the solution of the corresponding elastic problem of determination of the crack opening displacement and the problem of determination of the effective moduli of the composite reinforced with unidirectional discrete fibers. Using the theoretically proved principle of elasto-viscoelastic analogy and the method of Laplace inverse transformation, we obtain a solution in a time domain. In the second stage, using the criterion of critical crack opening displacement for a transverse shear crack and an equation for the viscoelastic crack opening displacement of this crack, we construct an equation of crack growth. We present results of the numerical solution, which illustrate the influence of relations between the relaxation parameters of the materials of the components on the durability of the body with a crack.     

Asymptotics of a Solution of a Three-Dimensional Nonlinear Wave Equation near a Butterfly Catastrophe Point

We consider an optimal distributed control problem in a planar convex domain with smooth boundary and a small parameter at the highest derivatives of an elliptic operator. The zero Dirichlet condition is given on the boundary of the domain, and the control is included additively in the inhomogeneity. The set of admissible controls is the unit ball in the corresponding space of square integrable functions. Solutions of the obtained boundary value problems are considered in the generalized sense as elements of a Hilbert space. The optimality criterion is the sum of the squared norm of the deviation of the state from a given state and the squared norm of the control with a coefficient. This structure of the optimality criterion makes it possible to strengthen, if necessary, the role of either the first or the second term of the criterion. In the first case, it is more important to achieve the desired state, while, in the second case, it is preferable to minimize the resource consumption. We study in detail the asymptotics of the problem generated by the sum of the Laplace operator with a small coefficient and a first-order differential operator. A feature of the problem is the presence of the characteristics of the limit operator which touch the boundary of the domain. We obtain a complete asymptotic expansion of the solution of the problem in powers of the small parameter in the case where the optimal control is an interior point of the set of admissible controls.     

A Note on the Radical of a Module Category

We characterize the finiteness of the representation type of an artin algebra in terms of the behavior of the projective covers and the injective envelopes of the simple modules with respect to the infinite radical of the module category. In case the algebra is representation-finite, we show that the nilpotency of the radical of the module category is the maximal depth of the composites of these maps, which is independent from the maximal length of the indecomposable modules.