总服务时间已知的两台同类机调度问题

研究调度问题上机器服务总时间已知的问题,针对机器的速度和准备时间不同,分析研究带机器准备时间的服务总时间已知的两台同类机半在线调度优化问题.目标为最小化最大机器服务时间,对于机器服务所有工件的时间已知的半在线情形,给出了人一个竞争比不超过2(s+1)/(2s+1)的半在线算法,其中s_i为机器速度,s_1=1,s_2=s>1.     

带两个服务等级的三台机最优在线算法

研究了带服务等级约束的三台平行机在线排序问题.每台机器和每个工件的服务等级为1或者2,工件只能在等级不高于它的机器上加工,即等级为1的工件只能在等级为1的机器上加工,等级为2的工件可在所有机器上加工.每个工件的加工时间为一个单位,目标是极小化所有工件的总完工时间.考虑两种情形:当一台机器等级为1,两台机器等级为2时,给出了竞争比为17/14的最优在线算法;当两台机器等级为1,一台机器等级为2时,给出了竞争比为43/36的最优在线算法.     

具有等级约束的三台机排序问题的可中断在线算法

研究具有等级约束的三台机在线排序问题．机器和工件的等级数均为1或2,工件只能在等级数不超过自身等级的机器上加工,且加工允许中断,目标是极小化最大工件完工时间．如果有两台机器等级为1,给出竞争比为3／2的在线算法,并证明算法是最好可能的;如果只有一台等级为1的机器,也给出竞争比为3／2的在线算法．     

在线可中断二台机器流水作业问题

本文研究了可中断的二台机器流水作业排序问题,目标函数为最小化最大完工时间,工件实时到达,工件信息在工件到达之前不可知。我们给出了该在线问题的下界,并对问题中只有两个到达时间的特殊情况给出了3/2竞争的在线算法。     

两台可拒绝同型机半在线排序问题

本文讨论一个两台可拒绝同型机半在线排序问题.当工件到达时,可以被拒绝,但要付出一定的罚值,也可以被接收加工,消耗一定的加工时间.其目标是要使所有加工工件生成的makespan和被拒绝工件的总罚值之和最小.加工不允许中断.进一步,机器带有两个并行处理子系统,可以提供两种排序方案,最后选取较好的一种.这是第一个在可拒绝同型机排序模型中使用半在线信息,我们设计出一个近似算法,其竞争比为3/2,另外又给出一个√3+1/2≈1.366的下界.     

带复合信息的三台平行机半在线排序问题

本文讨论在已知加工工件总长度(sum)以及机器带一个缓冲区(buffer)两个复合信息下的同型平行机半在线排序问题． Dosa和He研究了当机器数m=2时的情形,设计出竞争比为5／4的最优半在线算法．本文将其情况推广到三台机器,给出竞争比为4／3的半在线算法,并得到一个11／9的问题下界．     

带机器准备时间的两台同型机复合半在线排序问题

本文研究了预知两种信息,带机器准备时间的两台同型平行机复合半在线排序问题,即已知所有工件加工时间总和和工件按加工时间非增顺序到达,目标为极小化最大机器完工时间的半在线排序模型.我们分析了它的下界,并给出了竞争比为7/6的最优算法.     

已知工件最大加工时间的两台同类机半在线问题

考虑已知工件最大加工时间的两台同类机半在线问题．机器M1,M2的速度分别为s1=1,s2=s(s≥1),工件是一个一个独立地到来,工件的信息是逐个释放的,但所有工件中加工时间为最大的工件的加工时间是已知的,目标函数为极小化最大机器负载．此模型简记为Q2／known largest job／Cmax．作者给出了Qmax2算法并证明此算法的竞争比为2(s 1)/s 2(1≤s≤2)和(s 1)/s(s>2),且是紧的．同时给出Q2／known largest job／Cmax问题的一个下界,并且证明Qmax2算法的竞争比与最优算法竞争比之差不大于1/4.     

具有特殊工件的平行机在线排序问题

本文研究一类具有特殊工件的平行机在线排序问题,目标是最小化最大完工时间.此模型有两种工件:正常工件和特殊工件.正常工件能够在m台平行机的任何一台机器上加工,而特殊工件仅能够在它唯一被指定的机器上加工.文中所有特殊工件的指定机器为M1.我们提供了竞争比为(2m2-2m 1)/(m2-m 1)的在线近似算法.当m=2时,算法是最好可能的.当m=3时,算法的竞争比为13/7≈1.857,并且提供了竞争比的下界(1 (平方根33))14≈1.686.     

预知两种信息带准备时间的两台同型机半在线排序

研究了P2,r_j/decr,opt/Cmax问题,即预知工件大小非增排列decr和最优目标值opt的两台同型机的带准备时间的半在线问题,并给出了竞争比为7/6的半在线算法.     

Local search and suffix tree for car-sequencing problem with colors

This paper describes an approximation solution method for the car sequencing problem with colors. Firstly, we study the optimality of problems with a single ratio constraint. This study also introduces a data structure for efficient calculation of the penalties related to ratio constraints. We describe the constructive greedy algorithm and variable neighborhood search adjusted for the problem with colors. Tabu metaheuristic is used to improve the results obtained by VNS. We then represent the cars with their constraints as letters over an alphabet and apply the algorithm to spell the motifs in order to improve the number of batch colors without decreasing the costs associated to the set of ratio constraints. The algorithm achieves 19 out of the 64 best results for instance sets A and B. These instances are the reference instances for Challenge ROADEF.     

A Two-product,Single-machine,Storage-constrained Production Problem

This paper considers a two-product, single-machine production scheduling problem where there is an added constraint on the amount of finished stock that can be held. The need for a ratio of the cycle times of the two products is a feature both of two-product production scheduling problems contained on one machine and two-product inventory problems with constraints on storage capacity. This means an easy solution algorithm is possible for the problem addressed in the paper which has both types of constraints.     

A {(\frac 4 3) -} approximation algorithm for a special case of the two machine flow shop problem with several availability constraints

In this paper, we deal with a special case of the two-machine flow shop scheduling problem with several availability constraints on the second machine, under the resumable scenario. We develop an improved algorithm with a relative worst-case error bound of 4/3.     

An improved algorithm for the two machine flow shop problem with several availability constraints

In this paper we deal with the two-machine flow shop scheduling problem with several availability constraints on the first machine, under the resumable scenario. We first develop an improved algorithm with a relative worst-case error bound of 4/3. We then present a polynomially solvable case.     

Minimizing the total completion time on a single machine with the learning effect and multiple availability constraints

This paper considers a single machine scheduling problem with the learning effect and multiple availability constraints that minimizes the total completion time. To solve this problem, a new binary integer programming model is presented, and a branch-and-bound algorithm is also developed for solving the given problem optimally. Since the problem is strongly NP-hard, to find the near-optimal solution for large-sized problems within a reasonable time, two meta-heuristics; namely, genetic algorithm and simulated annealing are developed. Finally, the computational results are provided to compare the result of the binary integer programming, branch-and-bound algorithm, genetic algorithm and simulated annealing. Then, the efficiency of the proposed algorithms is discussed.     

A tabu search algorithm for scheduling pharmaceutical packaging operations

This paper addresses a practical scheduling problem arising in the packaging department of a pharmaceutical industrial plant. The problem is modeled as a multi-purpose machine scheduling problem with setup and removal times, release and due dates and additional constraints related to the scarce availability of tools and human operators. The objective functions are minimization of makespan and maximum tardiness in lexicographic order. Representing a solution with a directed graph allows us to devise an effective tabu search algorithm to solve the problem. Computational experiments, carried on real and randomly generated instances, show the effectiveness of this approach.     

一类具有资源约束和优先加工顺序约束极小化加权总完工时间调度优化问题研究

本文针对工件间具有链状优先约束和relocation资源约束的极小化加权总完工时间调度优化问题展开研究.针对这一NP难问题,利用relocation约束的性质和贪婪算法的思想,设计了一个多项式近似算法,并证明了当链不可中断,每个链具有相同工件数和工件间具有相同加工时间时,2为该算法的紧界.     

Handling equality constraints with agent-based memetic algorithms

In addition to inequality constraints, many mathematical models require equality constraints to represent the practical problems appropriately. The existence of equality constraints reduces the size of the feasible space significantly, which makes it difficult to locate feasible and optimal solutions. This paper presents a new equality constraint handling technique which enhances the performance of an agent-based evolutionary algorithm in solving constrained optimization problems with equality constraints. The technique is basically used as an agent learning process in the agent-based evolutionary algorithm. The performance of the proposed algorithm is tested on a set of well-known benchmark problems including seven new problems. The experimental results confirm the improved performance of the proposed technique.     

支持向量机中一种参数优化选取方法

本文给出一种支持向量机中的参数优化选取方法. 它是通过遗传算法和确定性算法相结合解平衡约束优化问题,求出二分类支持向量机(SVM)中的正则参数C,本文将C作为优化问题中的变量来处理.遗传算法用来求解以C为变量的优化问题, 而确定性算法对每一个C值求解约束.数值计算的结果表明,用文中所述的方法求得的C值能明显提高支持向量机的泛化性能.     

Minimizing the makespan in a single machine scheduling problems with flexible and periodic maintenance

This paper deals with a single machine scheduling problems with availability constraints. The unavailability of machine results from periodic maintenance activities. In our research, a periodic maintenance consists of several maintenance periods. We consider a machine should stop to maintain after a periodic time interval or to change tools after a fixed amount of jobs processed simultaneously. Each maintenance period is scheduled after a periodic time interval. We study the problems under deterministic environment and flexible maintenance considerations. Preemptive operation is not allowed. In addition, we propose a more reasonable flexible model for the real production settings. The objective is to minimize the makespan. The proposed problem is NP-hard in the strong sense and some heuristic algorithms are provided. The purpose is to present an efficient and effective heuristic algorithm so that it will be straightforward and easy to implement. Computational results show that the proposed algorithm first fit decreasing (DFF) performs well.