Grassmann image of non-isotropic surface of pseudo-Euclidean space

We consider submanifolds of non-isotropic planes of the Grassman manifold of the pseudo-Euclidean space. We prove a theorem about the unboundedness of the sectional curvature of the submanifolds of the two-dimensional non-isotropic planes of the four-dimensional pseudo-Euclidean space with the help of immersion in the six-dimensional pseudo-Euclidean space of index 3. We also introduce a concept of the indicatrix of normal curvature and study the properties of this indicatrix and the Grassman image of the non-isotropic surface of the pseudo-Euclidean space. We find a connection between the curvature of the Grassman image and the intrinsic geometry of the plane. We suggest the classification of the points of the Grassman image.     

Parametric analysis of the oscillatory solutions to stochastic differential equations with the Wiener and Poisson components by the Monte Carlo method

Using the Monte Carlo method, we address the influence of the Wiener and Poisson random noises on the behavior of oscillatory solutions to systems of stochastic differential equations (SDEs). For the linear and Van der Pol oscillators, we study the accuracy of estimates of the functionals of numerical solutions to SDEs obtained by the generalized explicit Euler method. For a linear oscillator, we obtain the exact analytical expressions for the mathematical expectation and the variance of the SDE solution. These expressions allow us to investigate the dependence of the accuracy of estimates of the solution moments on the values of SDE parameters, the size of meshsize, and the ensemble of simulated trajectories of the solution. For the Van der Pol oscillator, we study the dependence of the frequency and the damping rate of the oscillations of the mathematical expectation of SDE solution on the values of parameters of the Poisson component. The results of the numerical experiments are presented.     

Various methods of determining the natural frequencies and damping of composite cantilever plates. 1. Exact solution for the binomial model of deformation

On the basis of the classical theory of thin anisotropic laminated plates the article analyzes the free vibrations of rectangular cantilever plates made of fibrous composites. The application of Kantorovich's method for the binomial representation of the shape of the elastic surface of a plate yielded for two unknown functions a system of two connected differential equations and the corresponding boundary conditions at the place of constraint and at the free edge. The exact solution for the frequencies and forms of the free vibrations was found with the use of Laplace transformation with respect to the space variable. The magnitudes of several first dimensionless frequencies of the bending and torsional vibrations of the plate were calculated for a wide range of change of two dimensionless complexes, with the dimensions of the plate and the anisotropy of the elastic properties of the material taken into account. The article shows that with torsional vibrations the warping constraint at the fixed end explains the apparent dependence of the shear modulus of the composite on the length of the specimen that had been discovered earlier on in experiments with a torsional pendulum. It examines the interaction and transformation of the second bending mode and of the first torsional mode of the vibrations. It analyzes the asymptotics of the dimensionless frequencies when the length of the plate is increased, and it shows that taking into account the bending-torsion interaction in strongly anisotropic materials type unidirectional carbon reinforced plastic can reduce substantially the frequencies of the bending vibrations but has no effect (within the framework of the binomial model) on the frequencies of the torsional vibrations.Institute of Engineering Science Russian Academy of Sciences, St. Petersburg, Russia. St. Petersburg State University, Russia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 32, No. 6, pp. 759–769, November–December, 1996.     

The dynamics of the motion of a flat punch on the boundary of an elastic half-plane

The dynamic contact problem of the motion of a flat punch on the boundary of an elastic half-plane is considered. During motion, the punch deforms the elastic half-plane, penetrating it in such a manner that its base remains parallel to the boundary of the half-plane at each instant of time. In movable coordinates connected to the moving punch, the contact problem reduces to solving a two-dimensional integral equation, whose two-dimensional kernel depends on the difference between the arguments for each of the variables. An approximate solution of the integral equation of the problem is constructed in the form of a Neumann series, whose zeroth term is represented in the form of the superposition of the solutions of two-dimensional integral equations on the coordinate semiaxis minus the solution of the integral equation on the entire axis. This approach provides a way to construct the solution of the two-dimensional integral equation of the problem in four velocity ranges of motion of the punch, which cover the entire spectrum of its velocities, as well as to perform a detailed analysis of the special features of the contact stresses and vertical displacements of the free surface on the boundary of the contract area. An approximate method for solving the integral equation, which is based on a special approximation of the integrand of the kernel of the integral equation in the complex plane, is proposed for obtaining effective solutions of the problem that do not contain singular quadratures.     

The solution of the Hertz axisymmetric contact problem

The main terms of the asymptotic form of the solution of the contact problem of the compression without friction of an elastic body and a punch initially in point contact are constructed by the method of matched asymptotic expansions using an improved matching procedure. The condition of unilateral contact is formulated taking account of tangential displacements on the contact surface. An asymptotic solution of the problem for the boundary layer is constructed by the complex potential method. An asymptotic model is constructed, extending the Hertz theory to the case where the surfaces of the punch and elastic body in the vicinity of the contact area are approximated by paraboloids of revolution. The problem of determining the convergence of the contacting bodies from the magnitude of the compressive force is reduced to the problem of calculating the so-called coefficient of local compliance, which is an integral characteristic of the geometry of the elastic body and its fixing conditions.     

The virtual mass of a sphere in a suspension of spherical particles

The problem of the virtual mass of a sphere, moving in an ideal incompressible fluid when there are other identical spherical particles of arbitrary mass present is considered. A solution is constructed for the velocity potential of the fluid in the form of the superposition of perturbation fields, introduced into the flow by each of the particles. The perturbation fields are obtained in the form of functional series, the coefficients of which are mutually consistent by a defined system of equations. An explicit expression is obtained for the hydrodynamic force acting on the sphere in the form of a function of the coordinates of all the particles. A simple analytical dependence of the mean value of the force and the virtual mass of the sphere on the particle-to-fluid density ratio in a first approximation of the volume fraction of the dispersed phase is obtained for a statistically uniform distribution of the dispersed particles in the suspension, using the procedure of averaging over their different possible configurations in space.     

旋风分离器内流动的三维分析

本文详细阐述了旋风分离器内流动在球坐标系中的数学表述和结果，应用质量守恒定律和定常流动的运动定律，在轴对称的考虑下，用流函数方法详尽推导了流动的三个速度分量。此讨论是从三维的整体观点来全面分析流动状况的。此外，对文［１］中的一些结果作了必要的修正。     

On the evaluation of some distributions that arise in simultaneous tests for the equality of the latent roots of the covariance matrix

In this paper, the authors consider the evaluation of the distribution functions of the ratios of the intermediate roots to the trace of the real Wishart matrix as well as the ratios of the individual roots to the trace of the complex Wishart matrix. In addition, the authors consider the evaluation of the distribution functions of the ratios of the extreme roots of the Wishart matrix in the real and complex cases. Some applications and tables of the above distributions are also given.     

An algorithm for decomposing a polynomial system into normal ascending sets

We present an algorithm to decompose a polynomial system into a finite set of normal ascending sets such that the set of the zeros of the polynomial system is the union of the sets of the regular zeros of the normal ascending sets.If the polynomial system is zero dimensional,the set of the zeros of the polynomials is the union of the sets of the zeros of the normal ascending sets.     

Boundary Shape Control of the Navier-Stokes Equations and Applications

In this paper, the geometrical design for the blade's surface in an impeller or for the profile of an aircraft, is modeled from the mathematical point of view by a boundary shape control problem for the Navier-Stokes equations. The objective function is the sum of a global dissipative function and the power of the fluid. The control variables are the geometry of the boundary and the state equations are the Navier-Stokes equations. The Euler-Lagrange equations of the optimal control problem are derived, which are an elliptic boundary value system of fourth order, coupled with the Navier-Stokes equations. The authors also prove the existence of the solution of the optimal control problem, the existence of the solution of the Navier-Stokes equations with mixed boundary conditions, the weak continuity of the solution of the Navier-Stokes equations with respect to the geometry shape of the blade's surface and the existence of solutions of the equations for the Gateaux derivative of the solution of the Navier-Stokes equations with respect to the geometry of the boundary.     

Prediction of the growth of fatigue cracks taking environmental factors into account

A model of corrosion fatigue is proposed which takes into account the main phenomena of a mechanical nature, namely, the transfer of the active agent from the month of the crack to its tip, the accumulation of mechanical damage due to cyclic loads and the breakdown of the stability conditions in the body-with-cracks — load — environment system as the reason for the propagation of the crack tip. Particular attention is devoted to the mechanism by which active agent is transferred. In addition to diffusion, convective transfer as a consequence of the change in the shape and dimensions of the crack cavity is taken into account. The results of modelling are supplemented with diagrams, which relate the rate of growth of the crack with the range of the stress intensity factor, the concentration of the agent at the mouth of the crack and the characteristics of the cycle, equal to the ratio of the extremal values of the applied stresses in each cycle. The results are compared with experimental data.     

加权幂平均复合判断矩阵的群体AHP一致性研究

判断矩阵一致性是群体综合评价的重要内容。一致性可以反映专家群体就所有可能的替代方案达成完全一致的意见,利用一致性测度可以衡量评价者之间的差异,也是共识判断的基础。文章针对加权幂平均复合判断矩阵中存在的一致性问题进行研究,从幂平均次数对复合判断矩阵影响的角度,分析幂平均次数对一致性比率的影响程度,揭示两者之间的变化规律;研究专家判断矩阵的阶数对一致性比率的作用;从群体专家权重的角度,研究权重对复合判断矩阵一致性比率的敏感性。结果表明:(1)幂平均的次数会影响复合判断矩阵的一致性,幂平均的次数在有限区间内保证复合判断矩阵的满意一致性,有限区间长度同时依赖于判断矩阵的阶数与幂平均的次数,且一致性比率是关于幂平均次数的凹函数;(2)判断矩阵的阶数越高,专家给出判断矩阵的难度加大,然而随着判断矩阵阶数的升高,一致性比率会呈递减趋势;(3)专家的权数对于一致性比率影响较小,即专家权数的灵敏度较低,给定权数的扰动后不会影响复合判断矩阵的满意一致性。     

Periodic motions of a reversible second-order mechanical system: Application to the Sitnikov problem

A theory of the symmetric periodic motions (SPMs) of a reversible second-order system is presented which covers both oscillations and rotations. The structural stability property of the generating autonomous reversible system, which lies in the fact that the presence or absence of SPMs in a perturbed system is independent of the actual form of the “reversible” perturbations, is established. Both the case of the generation of SPMs from the family of SPMs of the generating system and birth cycle from the equilibrium state are investigated. Criteria of Lyapunov stability in a non-degenerate situation are obtained for the SPMs which are generated (in case of small values of the parameter). A method is proposed for constructing and investigating the Lyapunov stability of all the SPMs. The conditions for the existence of a cycle (symmetric and asymmetric) in the neighbourhood of a support “almost” resonance SPM are established for all cases of resonances. The theoretical results are applied to a study of the motion of a particle along a straight line which passes through the centre of mass of the system perpendicular to the plane of the identical attracting and simultaneously radiating main bodies (an extension of the Sitnikov problem) in the photogravitational version of the three-body problem. The circular problem is analysed and two different series of families of SPMs are found in the weakly elliptic problem. The instability of the equilibrium state is proved in the case of parametric resonance and the stability (and instability) domains are distinguished for arbitrary values of the eccentricity. All the SPMs with a period of 2π are constructed and the property of Lyapunov stability is investigated for these motions.     

Flow around an ellipsoid of revolution in a harmonic coaxial vector field

We give an integral equation defining a coaxial magnetic field near the surface of a superconductive axisymmetric body and the velocity of the liquid near the surface of an axisymmetric body situated coaxially to the flow of an ideal liquid. Using this equation in the case when the axisymmetric magnetic field before the placement of an ellipsoid of revolution coaxially to the field changed along the axis by a polynomial law, we analytically define the densities of the surface current and the force with which the magnetic field acts on the ellipsoid. Also the velocity of the liquid is determined near the surface of the ellipsoid of revolution and the force acting on the ellipsoid placed coaxially in the flow of an ideal liquid when the velocity of the liquid before the placement of the ellipsoid changed along the axis of symmetry by a polynomial law.     

Three-dimensional contact problems for an elastic wedge with a coating

Three-dimensional contact problems for an elastic wedge, one face of which is reinforced with a Winkler-type coating with different boundary conditions on the other face of the wedge, are investigated. A power-law dependence of the normal displacement of the coating on the pressure is assumed. The contact area, the pressure in this region, and the relation between the force and the indentation of a punch are determined using the method of non-linear boundary integral equations and the method of successive approximations. The results of calculations are analysed for different values of the aperture angle of the wedge, the relative distance of the punch from the edge of the wedge, the ratio of the radii of curvature of the punch (an elliptic paraboloid), and the non-linearity factors of the coating. The results obtained are compared with the solutions of similar problems for a wedge without a coating.     

The three-dimensional motion of optimalpyramidal bodies

The three-dimensional inertial motion of pyramidal bodies, optimal in their depth of penetration, formed from parts of planes tangential to a circular cone and having a base in the form of a rhombus or a star, consisting of four symmetrical cycles, is investigated using the numerical solution of the Cauchy problem of the complete system of equations of motion of a body. It is assumed that the force action of the medium on the body can be described within the framework of a local model, when the pressure on the body surface can be represented by a two-term formula, quadratic in the velocity, and the friction is constant. It is shown that the stability criterion, obtained previously for the rectilinear motion of a pyramidal body on the assumption that the perturbed motion of the body is planar, also enables one, in the case of an arbitrary specification of the small perturbations of the parameters leading to the tree-dimensional motion of the body, to determine the nature of development of these perturbations. It is shown that if the rectilinear motion of the body is stable, its perturbed three-dimensional motion can be represented in the form of the superposition of plane motions, and when investigating each of them, the analytical solution of the plane problem obtained earlier can be used.     

Design of anisotropic structures: Calculation,optimization, and tests

Conclusions A computational procedure based on a limiting state has been worked out which proposes the performance of tests of samples, small-scale models, and full-scale structures and a statistical analysis of the experimental data. Advantages of the method are shown in comparison with the computational method based on fracturing loads which pertain to estimating the accuracy of the computational scheme of structures and determining their safety coefficients. An optimality criterion is formulated within the framework of the method which is related to ensuring a maximum of the limiting (fracturing or critical) load with a constant mass of the structure.Applications of the method are given to estimation of the strength and stability of structures made out of polymeric and metal CM with the use of the Gol'denblat-Kopnov criterion and solutions based on linear shell theory. The conditions for realization of the optimality criterion of structures are determined. Recommendations are made for the rational reinforcement of structures made out of filamentary CM, and a procedure is proposed for the rational design of reinforced structures.As an example of the tests for stability of cylindrical shells made out of aluminum-magnesium alloy under external pressure, the legitimacy of the cause of the disagreement between the calculated and experimental critical loads, which consists of a discrepancy in the nature of wave formation at the instant of stability loss and initial imperfections, and the effectiveness of the computational method based on a limiting state are confirmed. Refined computational formulas for the critical loads of cylindrical shells made out of fiberglass, carbon fiber, and boraluminum under typical kinds of loading are proposed within the framework of the method and on the basis of an analysis of the results of tests, and a comparison is made of the effectiveness of the reinforcement of shells made out of aluminum-magnesium alloy and carbon fiber. The values of the safety coefficients of structures which guarantee their reliability are determined.Translated from Mekhanika Kompozitnykh Materialov, No. 2, pp. 262–271, March–April, 1980.     

The effect of the elasticity of an orbital tether system on the oscillations of a satellite

An orbital tether system, including a satellite (a rigid body), an elastic ponderable tether and a terminal load, is investigated. A mathematical model is obtained using Lagrange's equation of the second kind, which enables the plane translational motion of the centres of mass of the elements of the system and the rotational motion of the satellite and the tether to be investigated. It is shown that the equations of motion for the new independent variable, that is, the true anomaly angle, obtained on the assumption that the motion of the centre of mass of the system is independent of the relative motion of its elements, are an extension of the known mathematical models. The effect of the elasticity of the tether on the angular oscillations of the tether and the satellite is investigated. The model constructed can be used both to analyse of the deployment of a tether system as well as to investigate of the combined behaviour of a satellite and a tether about the natural centres of mass.     

Optimal design of reinforced-plastic chord flywheels under reliability limitations

Conclusions The proposed method makes it possible to accomplish optimal design of a CF according to the condition of providing a maximum energy-storing capacity with consideration of the random character of the strength and deformation properties of the plastic being used and the geometry of the composition of the system. In this case, the problem of optimal design reduces to a nonlinear programming problem, where the random values of the objective function and limitations are calculated on the basis of the Monte Carlo method. The requirement of fulfilling the prescribed level of reliability of the CF is the condition of optimal design, which makes it possible to take into account the variation of the load-bearing capacity of the structure, variation of the energy-storing capacity, and conditions of the planned purpose. The effect of the structural parameters was analyzed for the example of the optimal design of a FGRP CF and the interrelation and difference of the stochastic and deterministic solutions was shown. The investigations can be useful in the practice of using effective reinforced plastics in the production of mechanical energy storages.Translated from Mekhanika Kompozitnykh Materialov, No. 5, pp. 908–914, September–October, 1988.