图的最大二等分问题的非线性规划算法

基于图的最大二等分问题的半定规划松驰模型 ,本文提出一个非线性规划算法求解该模型 ,得到该半定规划松驰模型的一个次优解 ,并且给出算法的收敛性证明 .数值试验表明该方法可以有效地求解图的最大二等分问题的松驰模型     

图的最大二等分问题的低秩可行方向算法

基于图的最大二等分问题的半定规划松弛模型,利用矩阵的低秩分解技巧,给出了该问题的半定规划松弛的一种低秩可行方向算法.在一定的条件下,证明了算法的收敛性.结合0.699随机扰动方法得到原问题的近似最优解.数值实验表明该方法能有效地求解图的最大二等分问题.     

最大割问题和最大平分割问题基于半定规划松弛的近似算法

考虑每条边具有非负权重的无向图, 最大割问题要求将顶点集划分为两个集合使得它们之间的边的权重之和最大. 当最大割问题半定规划松弛的最优解落到二维空间时, Goemans将近似比从0.87856...改进为0.88456. 依赖于半定规划松弛的目标值与总权和的比值的曲线, 此曲线的最低点为0.88456, 当半定规划松弛的目标值与总权和的比值在0.5到0.9044之间时, 利用Gegenbauer多项式舍入技巧, 改进了Zwick的近似比曲线. 进一步, 考虑最大割问题的重要变形------最大平分割问题, 在此问题中增加了划分的两部分的点数相等的要求. 同样考虑了最大平分割问题半定规划松弛的最优解落到二维空间的情形, 并利用前述的Gegenbauer多项式舍入技巧得到0.7091-近似算法.     

一类全局优化问题的线性化方法

本文对带有不定二次约束且目标函数为非凸二次函数的最优化问题提出了一类新的确定型全局优化算法,通过对目标函数和约束函数的线性下界估计,建立了原规划的松弛线性规划,通过对松弛线性规划可行域的细分以及一系列松弛线性规划的求解过程,得到原问题的全局最优解.我们从理论上证明了算法能收敛到原问题的全局最优解.     

基于松弛策略解半无限规划模型的显式修正算法

讨论了一类线性半无限最优规划模型的求解算法.采用松弛方法解其系列子问题LP(T_k)及DLP(T_k),基于松弛策略和在适当的假设条件下,提出了一个我们称之为显式算法的新型算法.新算法的主要改进之处是算法在每一步迭代计算时,允许丢弃一些不必要的约束.在这种方式下,算法避免了求解系列太大规模的子问题.最后,基于提出的显式修正算法,并与传统割平面方法和已有文献中的松弛修正算法、对同一问题作了初步的数值比较实验.     

最大割问题的二次规划方法

本文给出了最大割问题的二次规划算法。这种算法通过求解最大割问题的二次规划松弛给出了一种较好的界，然后用分支定界法得到了最大割问题的解。数值结果表明这种算法是非常有效的。     

求解标准二次优化问题的割平面算法

标准的二次优化问题是NP-hard问题,把该问题转化为半不定的线性规划问题,且提出了一个线性规划的割平面算法来求解这个半不定的线性规划问题,并给出了该算法的收敛性证明.     

基于半定规划松弛的凸二层规划问题算法研究

提出使用凸松弛的方法求解二层规划问题,通过对一般带有二次约束的二次规划问题的半定规划松弛的探讨,研究了使用半定规划(SDP)松弛结合传统的分枝定界法求解带有凸二次下层问题的二层二次规划问题,相比常用的线性松弛方法,半定规划松弛方法可快速缩小分枝节点的上下界间隙,从而比以往的分枝定界法能够更快地获得问题的全局最优解.     

一种求解半定规划的邻近外梯度算法

本文提出了一种求解半定规划的邻近外梯度算法.通过转化半定规划的最优性条件为变分不等式,在变分不等式满足单调性和Lipschitz连续的前提下,构造包含原投影区域的半空间,产生邻近点序列来逼近变分不等式的解,简化了投影的求解过程.将该算法应用到教育测评问题中,数值实验结果表明,该方法是解大规模半定规划问题的一种可行方法.     

凸半无限规划的一个新的割平面算法

基于非线性规划和割平面方法,给出了凸半无限规划问题的一个分析中央割平面算法(ACCPM).该算法不需要在每一次迭代时计算所有的约束数值,而只需要求解一个中央割平面,从而使得问题的求解规模变小,这种算法对于求解可行域结构比较复杂的半无限规划非常有效,最后给出算法的收敛性证明.     

A Continuation Algorithm for Max-Cut Problem

A continuation algorithm for the solution of max-cut problems is proposed in this paper. Unlike the available semi-definite relaxation, a max-cut problem is converted into a continuous nonlinear programming by employing NCP functions, and the resulting nonlinear programming problem is then solved by using the augmented Lagrange penalty function method. The convergence property of the proposed algorithm is studied. Numerical experiments and comparisons with the Geomeans and Williamson randomized algorithm made on some max-cut test problems show that the algorithm generates satisfactory solutions for all the test problems with much less computation costs.     

AN EFFECTIVE CONTINUOUS ALGORITHM FOR APPROXIMATE SOLUTIONS OF LARGE SCALE MAX-CUT PROBLEMS

An effective continuous algorithm is proposed to find approximate solutions of NP-hardmax-cut problems.The algorithm relaxes the max-cut problem into a continuous nonlinearprogramming problem by replacing n discrete constraints in the original problem with onesingle continuous constraint.A feasible direction method is designed to solve the resultingnonlinear programming problem.The method employs only the gradient evaluations ofthe objective function,and no any matrix calculations and no line searches are required.This greatly reduces the calculation cost of the method,and is suitable for the solutionof large size max-cut problems.The convergence properties of the proposed method toKKT points of the nonlinear programming are analyzed.If the solution obtained by theproposed method is a global solution of the nonlinear programming problem,the solutionwill provide an upper bound on the max-cut value.Then an approximate solution to themax-cut problem is generated from the solution of the nonlinear programming and providesa lower bound on the max-cut value.Numerical experiments and comparisons on somemax-cut test problems(small and large size)show that the proposed algorithm is efficientto get the exact solutions for all small test problems and well satisfied solutions for mostof the large size test problems with less calculation costs.     

A discrete filled function algorithm embedded with continuous approximation for solving max-cut problems

In this paper, a discrete filled function algorithm embedded with continuous approximation is proposed to solve max-cut problems. A new discrete filled function is defined for max-cut problems, and properties of the function are studied. In the process of finding an approximation to the global solution of a max-cut problem, a continuation optimization algorithm is employed to find local solutions of a continuous relaxation of the max-cut problem, and then global searches are performed by minimizing the proposed filled function. Unlike general filled function methods, characteristics of max-cut problems are used. The parameters in the proposed filled function need not to be adjusted and are exactly the same for all max-cut problems that greatly increases the efficiency of the filled function method. Numerical results and comparisons on some well known max-cut test problems show that the proposed algorithm is efficient to get approximate global solutions of max-cut problems.     

非线性-线性二层规划问题的罚函数方法

利用下层问题的K-T最优性条件将下层为线性规划的一类非线性二层规划转化成相应的单层规划,同时取下层问题的互补条件为罚项,构造了该类非线性二层规划的罚问题.通过对相应罚问题性质的分析,得到了该类非线性二层规划问题的最优性条件,同时设计了该类二层规划问题的求解方法.数值结果表明该方法是可行、有效的.     

Relaxed cutting plane method with convexification for solving nonlinear semi-infinite programming problems

In this paper, we present an algorithm to solve nonlinear semi-infinite programming (NSIP) problems. To deal with the nonlinear constraint, Floudas and Stein (SIAM J. Optim. 18:1187?C1208, 2007) suggest an adaptive convexification relaxation to approximate the nonlinear constraint function. The ??BB method, used widely in global optimization, is applied to construct the convexification relaxation. We then combine the idea of the cutting plane method with the convexification relaxation to propose a new algorithm to solve NSIP problems. With some given tolerances, our algorithm terminates in a finite number of iterations and obtains an approximate stationary point of the NSIP problems. In addition, some NSIP application examples are implemented by the method proposed in this paper, such as the proportional-integral-derivative controller design problem and the nonlinear finite impulse response filter design problem. Based on our numerical experience, we demonstrate that our algorithm enhances the computational speed for solving NSIP problems.     

A technique for speeding up the solution of the Lagrangean dual

We propose techniques for the solution of the LP relaxation and the Lagrangean dual in combinatorial optimization and nonlinear programming problems. Our techniques find the optimal solution value and the optimal dual multipliers of the LP relaxation and the Lagrangean dual in polynomial time using as a subroutine either the Ellipsoid algorithm or the recent algorithm of Vaidya. Moreover, in problems of a certain structure our techniques find not only the optimal solution value, but the solution as well. Our techniques lead to significant improvements in the theoretical running time compared with previously known methods (interior point methods, Ellipsoid algorithm, Vaidya's algorithm). We use our method to the solution of the LP relaxation and the Langrangean dual of several classical combinatorial problems, like the traveling salesman problem, the vehicle routing problem, the Steiner tree problem, thek-connected problem, multicommodity flows, network design problems, network flow problems with side constraints, facility location problems,K-polymatroid intersection, multiple item capacitated lot sizing problem, and stochastic programming. In all these problems our techniques significantly improve the theoretical running time and yield the fastest way to solve them.     

EXPEDIS: An exact penalty method over discrete sets

We address the problem of minimizing a quadratic function subject to linear constraints over binary variables. We introduce the exact solution method called EXPEDIS  where the constrained problem is transformed into a max-cut instance, and then the whole machinery available for max-cut can be used to solve the transformed problem. We derive the theory in order to find a transformation in the spirit of an exact penalty method; however, we are only interested in exactness over the set of binary variables. In order to compute the maximum cut we use the solver BiqMac. Numerical results show that this algorithm can be successfully applied on various classes of problems.     

The multi-product newsboy problem with supplier quantity discounts and a budget constraint

This paper considers the multi-product newsboy problem with both supplier quantity discounts and a budget constraint, while each feature has been addressed separately in the literature. Different from most previous nonlinear optimization models on the topic, the problem is formulated as a mixed integer nonlinear programming model due to price discounts. A Lagrangian relaxation approach is presented to solve the problem. Computational results on both small and large-scale test instances indicate that the proposed algorithm is extremely effective for the problem. An extension to multiple constraints and preliminary computational results are also reported.