首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 93 毫秒
1.
为了降低保修费用,对产品的二维预防性保修策略进行优化.将预防性维修对产品的维修程度进一步细分,并用修复因子来区别不同的维修程度,提出两种程度预防性维修相结合的保修策略.针对提出的保修策略,建立保修费用模型,提出模型求解方法.通过算例,证明该保修策略的有效性,并对结果进行了分析.  相似文献   

2.
研究由两个部件串联组成的系统的预防维修策略,当系统的工作时间达到T时进行预防维修,预防维修使部件恢复到上一次故障维修后的状态.当部件发生故障后进行故障维修,因为各种原因可能会延迟修理.部件在每次故障维修后的工作时间形成随机递减的几何过程,且每次故障后的维修时间形成随机递增的几何过程.以部件进行预防维修的间隔T和更换前的故障次数N组成的二维策略(T,N)为策略,利用更新过程和几何过程理论求出了系统经长期运行单位时间内期望费用的表达式,并给出了具体例子和数值分析.  相似文献   

3.
本文研究了两同型部件,一个修理设备组成的冷贮备可修系统.在故障部件不能"修复如新"的条件下,分别以系统中部件1故障次数N,工作时间T和(N,T)为维修策略,利用更新过程和几何过程,求出修理设备经长期运行单位时间内平均停工时间表达式.并在部件寿命的分布函数和修理时间的分布函数已知的情况下,以部件1故障次数N为策略证明存在最优N*使修理设备经长期运行单位时间内平均停工时间最长.最后,通过数值例子验证最优策略的存在性.  相似文献   

4.
讨论了关于汽车追尾的冲击模型的可修系统.在系统不能修复如新的条件下,假定汽车运行时间构成随机递减的几何过程,逐次追尾后的维修时间构成随机递增的几何过程.分别考虑汽车按比例保修和免费保修条件下,以汽车追尾次数N为策略,以车主在汽车长期运行单位时间内的期望费用为目标函数,导出目标函数的解析表达式P1(N)与P2(N).最后,通过实例分析,求出最优策略N*,使得车主在汽车长期运行单位时间内的期望费用最小.  相似文献   

5.
基于消费者对保修的需求,设计消费者偏爱的保修策略是制造商巩固市场地位、提升市场竞争力的一种战略决策。与此同时,以较低费用制定较长出保服役时间的出保维修策略也是消费者一直追求的目标。本文以两类失效产品为研究对象,首先从制造商角度将消费者偏爱的更新免费更换保修策略与产品定价相融合,开展了产品保修策略设计。其次,从消费者角度将预防维修与经典周期更换策略相融合,提出了维修—周期更换策略,且将其作为出保维修策略并对相应的性能进行了说明。通过数值实验发现,利润模型可对保修开展设计;与总费用模型作为目标函数相比,费用率模型作为目标函数可降低寿命周期费用;与经典周期更换策略相比,提出的维修—周期更换策略能使出保服役时间更长、费用率更低。  相似文献   

6.
<正> 本文叙述了利用状态向量图求出对应系统的结构函数的表达式,文中对三部件系统的结构函数作了详细的讨论,并把这些方法应用于四部件系统,实际上对多部件系统也是适用的.在系统可靠性数学理论的研究中,求出系统的结构函数的表达式是有一定意义的.  相似文献   

7.
本文研究了单部件、一个修理工组成的可修系统的最优更换问题,假定系统不能修复如新,以系统年龄T为策略,利用几何过程求出了最优的策略T^*,使得系统经长期运行单位时间内期望效益达到最大,并求出了系统经长期运行单位时间内期望效益的显式表达式。在一定条件下证明了T^*的唯一存在性。最后还证明了策略T^*比文献[6]中的策略T^*优。  相似文献   

8.
本文研究了一个修理工带有单重休假的单部件可修系统.为了延长系统的使用寿命,在系统故障前考虑了预防维修,且假定预防维修能够“修复如新”,而故障维修为“修复非新”时,以系统的故障次数N为更换策略.通过更新过程和几何过程理论,得出系统经长期运行单位时间内期望费用的明显表达式,并对预防维修的定长间隔时间T及更换策略N进行了讨论,最后,通过实例分析,求出最优策略N’,使得目标函数取得最优值.  相似文献   

9.
不能修复如新的两部件串联系统的可靠性分析   总被引:6,自引:0,他引:6  
考虑了两部件串联且只有一个修理工的可修系统.在假定部件的寿命和修理时间分布均为负指数分布,但部件每次失效后都不能修复如新的情况下,利用几何过程和补充变量法,并使用一种构造矩阵的新方法,求出了系统的一些主要可靠性指标.  相似文献   

10.
针对二手产品的维修问题,给出了二手产品生命周期的定义,提出了考虑更新延长两阶段保修的维修策略模型。该策略综合考虑了产品的年龄变化、延保折扣、小修和生产损失费用等因素,从顾客的角度出发,建立以顾客期望总费用率最小化为目标的免费更换保修和按比例更换保修两种策略模型,并给出模型最优化的相关理论证明。算例研究验证了模型的有效性,并对参数的灵敏度进行了分析,文中结论可为顾客进行产品维修计划提供决策依据。  相似文献   

11.
In this study, we model the warranty servicing costs under nonrenewing and renewing free repair warranties. We assume nonzero increasing repair times with the warranty cost depending on the length of the repair time. An increasing geometric process is used to model the consecutive repair times. We introduce the generalised alternating renewal process, which is an alternating process with cycles consisting of an item's operational time followed by the corresponding repair time. We derive analytical results for a generalised alternating renewal process with a finite time horizon and use them to evaluate the warranty costs over the warranty period and over the life cycle of the product under the nonrenewing free repair warranty and renewing free repair warranty. Properties of the model are demonstrated through a simulation study and through the application to warranty claims data from an automotive manufacturer.  相似文献   

12.
激烈的市场竞争迫使制造商们逐渐向以顾客需求为中心的公司转变。在近 20 年内,作为影响顾客满意度的主要因素,产品的质保服务管理的相关研究开始成为学术界的焦点。良好的质保服务会给企业节省较多的运营成本,故对于刚投入市场的新产品而言,准确地预测质保需求对制造商合理分配资金等具有重要意义。以往对质保需求的预测模型都局限于分析长期意义上一个产品的总质保成本,忽略了产品的维修时间和动态销售过程对准确预测产品的总质保需求及成本的影响。为此,以销售期内的产品所产生的维修需求为主要的研究对象,深入探讨维修时间对预测质保需求的影响。模型中,利用非齐次泊松过程模拟产品的动态销售过程,并利用复合随机过程中的交错更新理论来刻画维修时间对总质保需求的影响。最后的参数分析,为企业更好地管理质保服务提供了重要的现实依据。  相似文献   

13.
Most companies seek efficient rectification strategies to keep their warranty related costs under control. This study develops and investigates different repair strategies for one- and two-dimensional warranties with the objective of minimizing manufacturer’s expected warranty cost. Static, improved and dynamic repair strategies are proposed and analyzed under different warranty structures. Numerical experimentation with representative cost functions indicates that performance of the policies depend on various factors such as product reliability, structure of the cost function and type of the warranty contract.  相似文献   

14.
The maintenance policy for a product's life cycle differs for second‐hand and new products. Although several maintenance policies for second‐hand products exist in the literature, they are rarely investigated with reference to periodic inspection and preventive maintenance action during the warranty period. In this research, we study an optimal post‐warranty maintenance policy for a second‐hand product, which was purchased at age x with a fixed‐length warranty period. During the warranty period, the product is periodically inspected and maintained preventively at a prorated cost borne by the user, while any product failure is only minimally repaired by the dealer. After the warranty expires, the product is self‐maintained by the user for a fixed‐length maintenance period and the costs incurred during this time are fully borne by the user. At the end of the maintenance period, the product is replaced with a product of the user's choice. This study is focused on the determination of an optimal length for the maintenance period after the warranty expiration. As a criterion for the optimality, we adopt the long‐run mean cost during the second‐hand product's life cycle from the user's perspective. Finally, our results are analyzed numerically for sensitive analysis of several relevant factors, assuming that the failure distribution follows a Weibull distribution.  相似文献   

15.
Product warranty is an important part of new product marketing and sales. Offering warranty implies additional costs in the form of warranty servicing cost. Product reliability has a serious impact on the warranty servicing cost. As such, effective management of product reliability must take into account the link between warranty and reliability. This paper deals with this topic and develops a framework needed for effective management of product reliability. It reviews the relevant literature and defines topics for future research.  相似文献   

16.
When products are sold under warranty, the manufacturer incursadditional costs for warranty servicing. Preventive maintenanceactions can be used to reduce this cost and these are worthwhileonly if the extra cost incurred is less than the reduction achieved.In this paper we propose a new preventive maintenance policywhere the parameters are selected optimally to minimize thetotal warranty servicing cost.  相似文献   

17.
This paper analyses respectively the expected warranty costs from the perspectives of the manufacturer and the consumer. For a two-component series system with stochastic dependence between components, both the non-renewing free replacement policy and the renewing replacement policy are examined. It is assumed that whenever component 1 fails, a random damage to component 2 is occurred while a component 2 failure causes the system failure. Component 2 fails when its total accumulative damage exceeds a pre-determined level L. By considering the consumer’s behavior and the product service time, the warranty costs allocations between the manufacturer and the consumer are presented. Numerical examples are given to demonstrate the applicability of the methodology. It is proved that, independent of the type of the warranty policy, the failure interaction between components impacts the manufacturer profits and the consumer costs. The initial warranty length has also an impact on the product quality preferences to both the consumer and the manufacturer.  相似文献   

18.
Manufacturers supplying products under warranty need a strategy to deal with failures during the warranty period: repair the product or replace it by a new one, depending on e.g. age and/or usage of the failed product. An (implicit) assumption in virtually all models is that new products to replace the failed ones are immediately available at given replacement costs. Because of the short life cycles of many products, manufacturing may be discontinued before the end of the warranty period. At that point in time, the supplier has to decide how many products to put on the shelf to replace failed products under warranty that will be returned from the field (the last time buy decision). This is a trade-off between product availability for replacement and costs of product obsolescence. In this paper, we consider the joint optimization of repair-replacement decisions and the last time buy quantity for products sold under warranty. We develop approximations to estimate the total relevant costs and service levels for this problem, and show that we can easily find near-optimal last time buy quantities using a numerical search. Comparison to discrete event simulation results shows an excellent performance of our methods.  相似文献   

19.
This paper presents a cost minimisation model for an optimal design of a mixed series-parallel system with deteriorating components. The model incorporates warranty, periodic preventive maintenance, and minimal repair in the design of system configuration. Imperfect repair is adopted to model the effect of preventive maintenance. Both free and pro-rata warranty policies are considered. A numerical example is given to demonstrate the application of this model.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号