Factors shaping mathematics lecturers’ service teaching in different departments

In this article we focus on university lecturers’ approaches to the service teaching and factors that influence their approaches. We present data obtained from the interviews with 19 mathematics and three physics lecturers along with the observations of two mathematics lecturers’ calculus courses. The findings show that lecturers’ approaches to teaching the same topic vary across departments; that is, they consciously privilege different aspects of mathematics, set different questions on examinations and follow different textbooks while teaching in different departments. We discuss factors influencing lecturers’ decision of what (mathematics) to teach in different departments and offer educational implications for service mathematics teaching in terms of students’ mathematical needs and the role of mathematics for client students.     

Supply chain DEA: production possibility set and performance evaluation model

Performance evaluation is of great importance for effective supply chain management. The foundation of efficiency evaluation is to faithfully identify the corresponding production possibility set. Although a lot of researches have been done on supply chain DEA models, the exact definition for supply chain production possibility set is still in absence. This paper defines two types of supply chain production possibility sets, which are proved to be equivalent to each other. Based upon the production possibility set, a supply chain CRS DEA model is advanced to appraise the overall technical efficiency of supply chains. The major advantage of the model lies on the fact that it can help to find out the most efficient production abilities in supply chains, by replacing or improving inefficient subsystems (supply chain members). The proposed model also directly identifies the benchmarking units for inefficient supply chains to improve their performance. A real case validates the reasonableness and acceptability of this approach.     

Incorporating performance measures with target levels in data envelopment analysis

Data envelopment analysis (DEA) is a technique for evaluating relative efficiencies of peer decision making units (DMUs) which have multiple performance measures. These performance measures have to be classified as either inputs or outputs in DEA. DEA assumes that higher output levels and/or lower input levels indicate better performance. This study is motivated by the fact that there are performance measures (or factors) that cannot be classified as an input or output, because they have target levels with which all DMUs strive to achieve in order to attain the best practice, and any deviations from the target levels are not desirable and may indicate inefficiency. We show how such performance measures with target levels can be incorporated in DEA. We formulate a new production possibility set by extending the standard DEA production possibility set under variable returns-to-scale assumption based on a set of axiomatic properties postulated to suit the case of targeted factors. We develop three efficiency measures by extending the standard radial, slacks-based, and Nerlove–Luenberger measures. We illustrate the proposed model and efficiency measures by applying them to the efficiency evaluation of 36 US universities.     

Scheduling of multistage fast-moving consumer goods plants

Fast-moving consumer goods (FMCG) plants are required to be highly flexible due to their multiproduct nature and frequent portfolio changes with seasons or consumer preferences. The multipurpose nature of equipment units usually results in changeover activities which can increase the production scheduling model’s size significantly. The objective of this paper is to present two approaches to decrease the number of changeover activities. The first approach aims to reduce unit flexibility by reducing the allowable task to unit allocations. The second approach emphasises sequencing operations on units. By limiting the set of possible task sequences in the scheduling problem, the number of allowable activities (especially changeovers) is decreased and the optimisation procedure has a smaller search space. The results of these approaches, tested against realistically sized instances indicate their effectiveness in reducing the model size and the solution time, enabling the solution of industrial examples which previously could not be solved.     

Explaining inefficiency in nonparametric production models: the state of the art

The performance of economic producers is often affected by external or environmental factors that, unlike the inputs and the outputs, are not under the control of the Decision Making Units (DMUs). These factors can be included in the model as exogenous variables and can help to explain the efficiency differentials, as well as improve the managerial policy of the evaluated units. A fully nonparametric methodology, which includes external variables in the frontier model and defines conditional DEA and FDH efficiency scores, is now available for investigating the impact of external-environmental factors on the performance. In this paper, we offer a state-of-the-art review of the literature, which has been proposed to include environmental variables in nonparametric and robust (to outliers) frontier models and to analyse and interpret the conditional efficiency scores, capturing their impact on the attainable set and/or on the distribution of the inefficiency scores. This paper develops and complements the approach of B?din et al. (2012) by suggesting a procedure that allows us to make local inference and provide confidence intervals for the impact of the external factors on the process. We advocate for the nonparametric conditional methodology, which avoids the restrictive “separability” assumption required by the two-stage approaches in order to provide meaningful results. An illustration with real data on mutual funds shows the usefulness of the proposed approach.     

A robust data envelopment analysis model with different scenarios

Input and output data, under uncertainty, must be taken into account as an essential part of data envelopment analysis (DEA) models in practice. Many researchers have dealt with this kind of problem using fuzzy approaches, DEA models with interval data or probabilistic models. This paper presents an approach to scenario-based robust optimization for conventional DEA models. To consider the uncertainty in DEA models, different scenarios are formulated with a specified probability for input and output data instead of using point estimates. The robust DEA model proposed is aimed at ranking decision-making units (DMUs) based on their sensitivity analysis within the given set of scenarios, considering both feasibility and optimality factors in the objective function. The model is based on the technique proposed by Mulvey et al. (1995) for solving stochastic optimization problems. The effect of DMUs on the product possibility set is calculated using the Monte Carlo method in order to extract weights for feasibility and optimality factors in the goal programming model. The approach proposed is illustrated and verified by a case study of an engineering company.     

Detailed layout planning for irregularly-shaped machines with transportation path design

In order to obtain a competitive level of productivity in a manufacturing system, efficient machine or department arrangements and appropriate transportation path structures are of considerable importance. By defining a production system’s basic structure and material flows, the layout determines its operational performance over the long term. However, most approaches proposed in the literature provide only a block layout, which neglects important operational details. By contrast, in this paper, we introduce approaches to planning layouts at a more detailed level. Hence, this present paper introduces an integrated approach which allows a more detailed layout planning by simultaneously determining machine arrangement and transportation paths. Facilities to be arranged as well as the entire layout may have irregular shapes and sizes. By assigning specific attributes to certain layout subareas, application-dependent barriers within the layout, like existing walls or columns, can be incorporated. We introduce a new mathematical layout model and develop several improvement procedures. An analysis of the computational experiments shows that more elaborate heuristics using variable neighborhoods can generate promising layout configurations.     

How to measure the impact of environmental factors in a nonparametric production model

The measurement of technical efficiency allows managers and policy makers to enhance existing differentials and potential improvements across a sample of analyzed units. The next step involves relating the obtained efficiency estimates to some external or environmental factors which may influence the production process, affect the performances and explain the efficiency differentials. Recently introduced conditional efficiency measures (,  and ), including conditional FDH, conditional DEA, conditional order-m and conditional order-α, have rapidly developed into a useful tool to explore the impact of exogenous factors on the performance of Decision Making Units in a nonparametric framework. This paper contributes in a twofold fashion. It first extends previous studies by showing that a careful analysis of both full and partial conditional measures allows the disentangling of the impact of environmental factors on the production process in its two components: impact on the attainable set and/or impact on the distribution of the efficiency scores. The authors investigate these interrelationships, both from an individual and a global perspective. Second, this paper examines the impact of environmental factors on the production process in a new two-stage type approach but using conditional measures to avoid the flaws of the traditional two-stage analysis. This novel approach also provides a measure of inefficiency whitened from the main effect of the environmental factors allowing a ranking of units according to their managerial efficiency, even when facing heterogeneous environmental conditions. The paper includes an illustration on simulated samples and a real data set from the banking industry.     

An efficient grouping genetic algorithm for U-shaped assembly line balancing problems with maximizing production rate

U-type assembly line is one of the important tools that may increase companies’ production efficiency. In this study, two different modeling approaches proposed for the assembly line balancing problems have been used in modeling type-II U-line balancing problems, and the performances of these models have been compared with each other. It has been shown that using mathematical formulations to solve medium and large size problem instances is impractical since the problem is NP-hard. Therefore, a grouping genetic and simulated annealing algorithms have been developed, and a particle swarm optimization algorithm is adapted to compare with the proposed methods. A special crossover operator that always obtains feasible offspring has been suggested for the proposed grouping genetic algorithm. Furthermore, a local search procedure based on problem-specific knowledge was applied to increase the intensification of the algorithm. A set of well-known benchmark instances was solved to evaluate the effectiveness of the proposed and existing methods. Results showed that while the mathematical formulations can only be used to solve small size instances, metaheuristics can obtain high quality solutions for all size problem instances within acceptable CPU times. Moreover, grouping genetic algorithm has been found to be superior to the other methods according to the number of optimal solutions, or deviations from the lower bound values.     

Optimal system design series-network DEA models

There is an urgent need in a wide range of fields such as logistics and supply chain management to develop effective approaches to measure and/or optimally design a network system comprised of a set of units. Data envelopment analysis (DEA) researchers have been developing network DEA models to measure decision making units’ (DMUs’) network systems. However, to our knowledge, there are no previous contributions on the DEA-type models that help DMUs optimally design their network systems. The need to design optimal systems is quite common and is sometimes necessary in practice. This research thus introduces a new type of DEA model termed the optimal system design (OSD) network DEA model to optimally design a DMUs (exogenous and endogenous) input and (endogenous and final) output portfolios in terms of profit maximization given the DMUs total available budget. The resulting optimal network design through the proposed OSD network DEA models is efficient, that is, it lies on the frontier of the corresponding production possibility set.     

A comparative study of the effect of the position of outliers on classical and nontraditional approaches to the two-group classification problem

Popularity of nontraditional approaches to the statistical classification problem has resulted from the potential of these techniques to outperform the standard parametric procedures under conditions when nonnormality is present. Thus proponents of these nontraditional models have recommended these models when outliers are in the data. However, research showing that these nontraditional models' performances can vary widely depending on where the outlier data are located has not been fully illustrated. The research in this paper demonstrates how the mathematical programming approaches and the nearest neighbor discriminant models can be affected by the position of contaminated normal data and that each of the models studied in this paper may not be robust to all types of outliers in the data. The results of this paper are also important because the study compares two recently proposed mathematical programming models as well as two versions of the nearest neighbor model with the standard classical parametric models. This combination of classification models does not appear to have been studied together under conditions of contaminated normal data in which numerous positions of the outliers are considered.     

Production planning for hybrid remanufacturing and manufacturing system with component recovery

In this paper, we address component recovery under the condition of limited resources from the OEM's (Original Equipment Manufacturer's) standpoint. We develop a linear programming model for a hybrid remanufacturing and manufacturing system for production planning problems with deterministic returns. In this paper, a data set from an OEM that both remanufactures and manufactures the products is used to demonstrate the performance of the proposed model. Subsequently, an analysis of the impact of the remanufactured product’s price and the quantity of returns on revenue and total cost will be discussed. We have found that uncertain factors of manufacturing influence the profit and uncertain factors of remanufacturing influence the production planning, such as the rate of the yield on component remanufacturing and the quantity of returns.     

Representation of time in mathematical programming modeling languages

Time-staged mathematical programming models have a planning horizon that is divided into a sequence of consecutive time periods. For the modeling of this sequence of time periods the use of calendars is proposed as an additional set concept for mathematical programming modeling languages. The definition of calendars is based on familiar notions such as set, ordering, interval length and functions. A calendar is an interval set and can be used to verify automatically the proper time referencing in stock balances. When a calendar is also a difference set, then backward and forward time referencing can be stated with the explicit use of time units. For models with a rolling horizon, concise and flexible ways to specify the structure of calendars are presented. The aggregation of raw data into model parameter values is supported by linking calendars that represent different time scales. The influence of the proposed calendar concept on the human ability to understand, maintain and verify models is analyzed throughout the paper on the basis of selected examples.     

Determining common weights in data envelopment analysis based on the satisfaction degree

The traditional data envelopment analysis model allows the decision-making units (DMUs) to evaluate their maximum efficiency values using their most favourable weights. This kind of evaluation with total weight flexibility may prevent the DMUs from being fully ranked and make the evaluation results unacceptable to the DMUs. To solve these problems, first, we introduce the concept of satisfaction degree of a DMU in relation to a common set of weights. Then a common-weight evaluation approach, which contains a max–min model and two algorithms, is proposed based on the satisfaction degrees of the DMUs. The max–min model accompanied by our Algorithm 1 can generate for the DMUs a set of common weights that maximizes the least satisfaction degrees among the DMUs. Furthermore, our Algorithm 2 can ensure that the generated common set of weights is unique and that the final satisfaction degrees of the DMUs constitute a Pareto-optimal solution. All of these factors make the evaluation results more satisfied and acceptable by all the DMUs. Finally, results from the proposed approach are contrasted with those of some previous methods for two published examples: efficiency evaluation of 17 forest districts in Taiwan and R&D project selection.     

Structuring production planning systems for computer applications

Activities in a job shop type mechanical company can be split in production, product cycle and production cycle. The corresponding flow in each of these are materials, manufacturing specifications and product requirements. Production planning will plan and control these flows. Basic data structures are a product model and a corresponding hierarchy linked to production resources. A planning system may be designed by combining a set of operation or building blocks. These are three types: user communication, data base management and basic operations. The basic operations cover all processing necessary in production planning and represent the fundamental building blocks. A list of basic operations is suggested.     

Solving generalized fuzzy data envelopment analysis model: a parametric approach

Data envelopment analysis (DEA) is a non-parametric technique to assess the performance of a set of homogeneous decision making units (DMUs) with common crisp inputs and outputs. Regarding the problems that are modelled out of the real world, the data cannot constantly be precise and sometimes they are vague or fluctuating. So in the modelling of such data, one of the best approaches is using the fuzzy numbers. Substituting the fuzzy numbers for the crisp numbers in DEA, the traditional DEA problem transforms into a fuzzy data envelopment analysis (FDEA) problem. Different methods have been suggested to compute the efficiency of DMUs in FDEA models so far but the most of them have limitations such as complexity in calculation, non-contribution of decision maker in decision making process, utilizable for a specific model of FDEA and using specific group of fuzzy numbers. In the present paper, to overcome the mentioned limitations, a new approach is proposed. In this approach, the generalized FDEA problem is transformed into a parametric programming, in which, parameter selection depends on the decision maker’s ideas. Two numerical examples are used to illustrate the approach and to compare it with some other approaches.     

Multicriteria approaches for ranking of efficient units in DEA models

Data envelopment analysis models usually split decision making units into two basic groups, efficient and inefficient. Efficiency score of inefficient units allows their ranking but efficient units cannot be ranked directly because of their maximum efficiency. That is why there are formulated several models for ranking of efficient units. The paper presents two original models for ranking of efficient units in data envelopment analysis—they are based on multiple criteria decision making techniques—goal programming and analytic hierarchy process. The first model uses goal programming methodology and minimizes either the sum of undesirable deviations or maximal undesirable deviation from the efficient frontier. The second approach is analytic hierarchy process model for ranking of efficient units. The two presented models are compared with several super-efficiency models and other approaches for ranking decision making units in DEA models including definitions based on distances from optimistic and pessimistic envelopes and cross efficiency evaluation models. The results of the analysis by all presented models are illustrated on a real data set—evaluation of 194 bank branches of one of the Czech commercial banks.     

Resource allocation and target setting for parallel production system based on DEA

The paper proposes methodology for resource allocation and target setting based on DEA (data envelopment analysis). It deals with organization can be modeled as consisting of several production units, each of which has parallel production lines. The previous studies in the DEA literature only deal with reallocating/allocating organizational resources to production units and set targets for them. In their researches, the production unit is treated as a black box. In such circumstances, how to arrange the production at production unit level is not clear. This paper serves to generate resource allocation and target setting plan for each production unit by opening the black box. The proposed model exploits production information of production lines in generating production plans. The resulting plan has following characteristics: (1) the performance of each production lines are evaluated under common weights; (2) the weights chose for evaluation keep the efficiency of the entire unit not worse off; (3) the worst behaved production line in the production unit under evaluation are improved as much as possible. Finally, the real data of a production system extracted from extant literature are used to demonstrate the proposed method.     

Rough set theory: a novel approach for extraction of robust decision rules based on incremental attributes

Rough set theory is a new data mining approach to manage vagueness. It is capable to discover important facts hidden in the data. Literature indicate the current rough set based approaches can’t guarantee that classification of a decision table is credible and it is not able to generate robust decision rules when new attributes are incrementally added in. In this study, an incremental attribute oriented rule-extraction algorithm is proposed to solve this deficiency commonly observed in the literature related to decision rule induction. The proposed approach considers incremental attributes based on the alternative rule extraction algorithm (AREA), which was presented for discovering preference-based rules according to the reducts with the maximum of strength index (SI), specifically the case that the desired reducts are not necessarily unique since several reducts could include the same value of SI. Using the AREA, an alternative rule can be defined as the rule which holds identical preference to the original decision rule and may be more attractive to a decision-maker than the original one. Through implementing the proposed approach, it can be effectively operating with new attributes to be added in the database/information systems. It is not required to re-compute the updated data set similar to the first step at the initial stage. The proposed algorithm also excludes these repetitive rules during the solution search stage since most of the rule induction approaches generate the repetitive rules. The proposed approach is capable to efficiently and effectively generate the complete, robust and non-repetitive decision rules. The rules derived from the data set provide an indication of how to effectively study this problem in further investigations.     

Factoring Effectiveness Factors!

It has previously been suggested that the effectiveness of strategic planning systems may be characterized in terms of a multi-attribute framework. This paper explores the possibility of reducing the postulated set of attributes to an ‘irreducible core’ by means of a factor analysis. In addition, the data set used in this analysis was explored to determine whether, in terms of their planning effectiveness, the organizations in the sample formed natural subgroups. Some interesting questions are generated by the analysis.