非线性互补问题的两种数值解法

本文研究了非线性互补问题的两类数值求解方法.在经典LQP算法及LevenbergMarquardt算法的基础上,构造了两种新算法,并证明了这两种新算法的收敛性.数值实验表明,新算法对测试问题优于已有算法.     

求解广义鞍点问题的一个新的类SOR算法

本文提出了求解广义鞍点问题的一个新的类SOR迭代算法,并分析了新算法的收敛性.数值实验结果表明新算法是十分有效的.     

计算Adomian多项式的新算法

本文给出了一个计算Adomian多项式的新算法,并将其用于求微分方程的近似 解.我们的算法比原有算法效率高,且易于在计算机上实现.我们在Maple中实现了这一 算法,并通过30多个微分方程的求解验证了新算法的有效性.     

一类具有非单调线搜索的混合共轭梯度算法

提出一类求解无约束最优化问题的混合共轭梯度算法,新算法有机地结合了DY算法和HS算法的优点,并采用非单调线搜索技术在较弱条件下证明了算法的全局收敛性.数值实验表明新算法具有良好的计算效能.     

解线性等式约束优化问题的模式搜索过滤集方法

提出一个解线性等式约束无导数优化的模式搜索过滤集算法,该算法将过滤集技术嵌入无导数优化算法中以改善算法的效率. 建立了新算法的总体收敛性, 初步的数值试验结果表明新算法是有效的.     

基于凸组合共轭梯度法的ARIMA模型参数估计

提出了一种凸组合共轭梯度算法,并将其算法应用到ARIMA模型参数估计中.新算法由改进的谱共轭梯度算法与共轭梯度算法作凸组合构造而成,具有下述特性:1)具备共轭性条件;2)自动满足充分下降性.证明了在标准Wolfe线搜索下新算法具备完全收敛性,最后数值实验表明通过调节凸组合参数,新算法更加快速有效,通过具体实例证实了模型的显著拟合效果.     

递减率的一种宏观改进算法

在对沈采实际区块进行油藏工程评价过程中,在对原有的综合递减率算法进行分析总结基础上对其进行了优化,提出了更具有宏观性的新算法.新算法克服了原油算法所受影响因素较多的特点,只与评价的递减区间端点的年产油量和区间长度有关.新算法降低了年产油量的波动对参数结果的影响,进而增强了对油田整体生产情况的把握分析能力,更准确地反应了油田的现状,进一步为油田区块今后的开发方案的调整与部署提供参考依据.新算法的优越性最后通过现场实例得到了验证.     

基于最小调整法求解旅行商问题

介绍了一种求解旅行商问题的新算法"最小调整法",给出了该算法求解旅行商问题的具体步骤以及有效性证明,对算法的复杂性及近似程度进行了分析.最后通过典型算例进行了检验说明.与经典算法相比,新算法体现了简单易行的特点,对求解旅行商问题具有一定的启发意义.     

Kth最短路径的Bellman改进算法

基于对Bellm an算法的改进,得到了求解k th最短路的新算法.改进算法的优势在于从Bellm an算法只能解决最短路问题拓展到求解k th最短路问题,而且可以考虑权重为负数的情况.与传统算法相比,新算法更易于理解.     

求解交通均衡配流问题新算法

给出了一个求解交通均衡配流问题的新算法,证明了新算法的收敛性,并在小型交通网络上进行了初步的数值试验.     

Moment information for probability distributions,without solving the moment problem,II: Main-mass,tails and shape approximation

How much information does a small number of moments carry about the unknown distribution function? Is it possible to explicitly obtain from these moments some useful information, e.g., about the support, the modality, the general shape, or the tails of a distribution, without going into a detailed numerical solution of the moment problem? In this, previous and subsequent papers, clear and easy to implement answers will be given to some questions of this type. First, the question of how to distinguish between the main-mass interval and the tail regions, in the case we know only a number of moments of the target distribution function, will be addressed. The answer to this question is based on a version of the Chebyshev–Stieltjes–Markov inequality, which provides us with upper and lower, moment-based, bounds for the target distribution. Then, exploiting existing asymptotic results in the main-mass region, an explicit, moment-based approximation of the target probability density function is provided. Although the latter cannot be considered, in general, as a satisfactory solution, it can always serve as an initial approximation in any iterative scheme for the numerical solution of the moment problem. Numerical results illustrating all the theoretical statements are also presented.     

Utilization and maintenance in a model with scrapping

We consider a productive asset, called equipment or capital good, and we examine the properties of, as well as the interactions between, the operating policies, which are determined by its optimal utilization and maintenance, and the capital policy of scrapping, which defines the optimal time when the productive asset is retired from its current use. Starting with an abstract model and using the approach of optimal control, initially we characterize the various types of equipment by assigning to them a single total profit index, which indicates how the above policies affect the flow of operating revenues plus capital gains or losses. This index is a function of market-determined prices. So using it we then investigate how the operating and capital policies are influenced by the rate of discount, the price of new equipment, and the rise or fall of the price of new equipment relative to the value of its output. Among other interesting results, we find that the effects of these prices on the nature and interactions of optimal policies depend crucially on whether the equipment is of the usual profit making type, where output is the main source of revenue, or of the antique type, where the main source of revenue is capital gains.     

卷烟材料组合搭配对主流烟气量及过滤效率的影响

为研究卷烟纸、成型纸、接装纸及嘴棒组合搭配对"中式卷烟"焦油量、烟气烟碱量、烟气水分、烟气一氧化碳量及过滤效率的影响,尝试采用L_(27)(3~(13))裂区正交设计方法对RR卷烟进行在线试验和取样.检测结果经过直观分析、方差分析及贡献率分析,结果表明:嘴棒长度、吸阻及接装纸透气度是影响试验指标的高度显著因素及重要因素.所以重点对嘴棒长度、吸阻及接装纸透气度进行调整和控制,可以很好地实现卷烟产品的质量控制,减少产品质量波动,降低产品成本.使用该方法可快捷、高效、经济、准确地寻找并确定卷烟材料多因素对卷烟主流烟气量及过滤效率的影响规律及卷烟产品的材料搭配优化方案.从而实现卷烟产品材料搭配精益化,满足烟草企业的实际需求.     

绩效度量的一致性、敏感性及准确性关系研究

将环境的波动性和度量噪音看作是影响绩效度量的两类不同的随机误差,在Linear-exponential-normal框架下,建立了以价值绩效度量和补偿绩效度量的线性组合为基础的收益激励模型,并分析了激励强度与绩效度量的一致性、敏感性和准确性之间的关系,以及环境波动性对上述关系的影响.研究发现,在确定性环境条件下,激励强度与绩效度量的"信号噪音比"成正比关系,但绩效度量的一致性的提高并不必然增加该度量指标在激励契约中的权重,而要视敏感性或噪音相对于一致性的变化幅度来定.特别地,在绩效度量的敏感性与一致性之间并不存在权衡取舍关系.研究还发现,波动性与激励强度之间存在负向关系,且波动性的存在降低了绩效度量的一致性和敏感性,但波动性对绩效度量的准确性的影响则呈非单调性变化.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

Fractal approach to the intephase in filled polymers

A fractal model of a filled polymer is proposed. The model allows us to estimate quantitatively the volume of an interphase, to take into account geometrical factors influencing the character and the interphase adhesion level, and to predict the mechanical strength of interfacial bonds. This makes it possible to calculate the size of the critical structural defect and the mechanical properties of filled polymers, which are in agreement with the experimental data. Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 1, pp. 3–32, January–February, 2000.     

Nonlocal Symmetries of the Camassa-Holm Type Equations

A class of nonlocal symmetries of the Camassa-Holm type equations with bi-Hamiltonian structures, including the Camassa-Holm equation, the modified Camassa-Holm equation, Novikov equation and Degasperis-Procesi equation, is studied. The nonlocal symmetries are derived by looking for the kernels of the recursion operators and their inverse operators of these equations. To find the kernels of the recursion operators, the authors adapt the known factorization results for the recursion operators of the KdV, modified KdV, Sawada-Kotera and Kaup-Kupershmidt hierarchies, and the explicit Liouville correspondences between the KdV and Camassa-Holm hierarchies, the modified KdV and modified Camassa-Holm hierarchies, the Novikov and Sawada-Kotera hierarchies, as well as the Degasperis-Procesi and Kaup-Kupershmidt hierarchies.     

旋转抛物面的新定义及其性质

从点的轨迹的角度,将R<'3>中的旋转抛物面定义为:R<'3>中到一定点与到一定平面(点不在平面上)距离相等的点的轨迹.同时引入旋转抛物面的焦点、准平面、准线等概念,并在此基础上证明关于旋转抛物面的焦点弦、准平面、顶点、对称轴、切平面之间的若干重要性质.     

网络优化中一个组合问题的探讨

文[4]提出了网络优化中若干有待解决的组合问题，本文围绕其中之一“减小直径问题”进行了探讨．设P（n，t）表示长为n的路径增加t条边后所得图直径的最小值，C（n，t）表示长为n的圈增加t条边后所得回直径的最小值．本文取得如下进展：1）给出P（n，2），P（n，3）及C（n，2）的精确值，并得出P（n，4）的一更精细的上界及一种更好的加边方式．上述结果均满足小极大度原则．2）在有极大度限制的条件下，分别对t为偶数和奇数给出了P（n，t）的上界．