多元化与公司风险研究

文章研究了公司的系统风险、债务风险和经营风险与公司的多元化程度的相关性。本文的实证结果表明,公司的系统风险与公司的多元化程度是正相关的;公司的债务风险与公司的多元化程度是正相关的;公司的经营风险与公司的多元化程度是负相关的。随着公司多元化程度加深,公司的经营风险会变小,但是公司面临的宏观的资本市场的系统风险和企业自身的债务风险,会随着变大。     

平面图形的形心在旋转体体积计算中的应用

本文讨论平面图形绕平面内的直线旋转的旋转体体积与被旋转的平面图形的形心的关系.当被旋转的平面图形的内部与旋转轴没有交点时,得到了用被旋转的平面图形的面积以及被旋转的平面图形的形心到旋转轴的距离表示的旋转体体积公式.     

维数不同的相关量之间的微积分关系

维数不同的相关量之间的微积分关系王金贵（北京电力高等专科学校１０００４４）我们可能都留意过，圆的面积的导数等于圆的周长，即，球的体积的导数等于球的表面积，即．反过来，当然有圆的周长的积分等于圆的面积，即．球的表面积的积分等于球的体积，即．事实上，不仅...     

赋权图的圆染色与区间染色

赋权图的区间染色的定义与赋权图的圆染色的定义非常类型,唯一的区别就是将Ｇ的顶点对应圆周上的孤换为Ｇ的顶点对应区间上的子区间,讨论了赋权的圆染色与区染色的关系。     

一个命题的中间点的渐近性

关于中值定理的中间点的渐近性的讨论已得到大量有趣的结果,对于某些经典命题的中间点的渐近性的讨论也是十分有趣的课题,本文给出了数学分析中的一个经典命题的中间点的一个渐近性的刻画.     

几何学概论（三）

（四）罗氏几何的光辉照亮了科学前进的道路我们来分析他的学说的哲学意义．住罗氏的时代,哲学中占统治地位的思想足康德的“不可知论”,按照这批人的说法,客观世界是存在的,但是不可知的,时间空间是人心的创造,是人心给经验安排的秩序,我们所确实知道的世界的规律性是人心按先天的原则所创造出来的,先天就是与经验无关的,     

李群表示论和Schubert条件

本文将Grassmann流形上的Schubert子簇所满足的经典的Schubert条件推广到一般的复半单李群G的广义旗流形.利用复半单李群的表示理论,我们首先在李群的权空间上引入自然的Ehresman偏序.这一偏序可以导出李群的最高权表示的权系、Weyl群及其陪集空间上的Ehresman偏序.然后我们对一般的复表示定义了相应的射影空间,Grassmann流形和旗流形.这使得能够像经典的情形一样来分析广义旗流形的Schubert子簇满足的Schubert条件.在讨论中,我们还给出了李群G的Weyl群及其陪集空间中的Bruhat-Chevalley偏序的简单判别条件.我们的结果应用到例外群,给出了Fulton提出的关于例外群的Schubert分析的问题的部分回答.     

可引进群运算的两类平面图

在某些文献中,我们常常看到图论与代数的概念及方法的密切联系和交错应用。例如,不久前,Babai等人即考虑了有敏锐的边可迁置换群的有向图,得到了关于这种图的最大外度数的估计的一些定理。而Bertram则反过来借助于图论的概念及方法,给出了关于有限群的某些数值(如非交换群中两两可换的一组元素的最大个数,等等)的大小的估计。 本文也将讨论群与图之间的联系。我们将使某些平面图的顶点与某些置换群的元素相对应,使顶点的序列与群元素的乘积相对应,然后通过对群的性质的研究,发现相应的平面图的顶点度数的一些规律,并据此解决     

关于线性偏微分方程的Cauchy问题的唯一性

<正> Cauchy问题的唯一性是偏微分方程的基本问题之一.经典的Cauchy-Kowalewski定理断言,解析方程或方程组的解析解是唯一的.1901年,Holmgren证明了,线性的解析方程或方程组的光滑解的唯一性.在取消关于系数的解析性的假设这个方向上的第一个结果是由Carleman在1939年给出的,他证明了两个自变量的相应结果,其中假设方程的主部的系数是实的,以及特征根是单重的,因而特征根的虚部如果不恒为零则总不为零.     

动态中国银行网络系统传染性风险研究

银行网络系统的传染性风险是目前国内外研究的重要问题,但是目前针对银行网络系统传染的风险研究均考虑的是静态的网络结构及网络上银行的资产负债也均为静态,忽视了动态的网络结构及银行动态的资产负债的演化.文章首先构建动态演化的银行网络系统,其包括网络结构的动态演化与银行节点的资产负债的动态演化;然后根据中国的实际数据,构建动态演化的中国银行网络系统,进一步研究中国银行网络系统的传染的演化规律,为中央银行制定政策提供决策依据.     

Investigation of factors mediating the effectiveness of authentic projects in the teaching of elementary statistics

Four instructors used authentic research projects and related curriculum materials when teaching elementary statistics in secondary and undergraduate settings. Projects were authentic in that students selected their own variables, defined their own research questions, and collected and analyzed their own data. Classes using these projects were considered treatment groups in the study. Student outcomes measured were content knowledge, perceived usefulness of statistics, and statistics self-efficacy. These outcomes were compared with those of students taught by the same instructors in prior terms without authentic projects (the control groups). Although all three outcomes increased for the treatment group in both settings, simple t-tests indicated that these gains were not statistically significant. Variables were identified as potential factors mediating the effects of treatment, and multivariate and univariate models were then used to examine treatment, setting, instructor effects, and student achievement level as variables jointly contributing to these three outcomes. Follow-up analyses suggested that some treatment effects were significant in more restricted contexts (e.g., in certain settings for certain types of students). The models also suggest multiple significant interactions among treatment, setting, individual instructor, and student achievement level, particularly on affective outcomes.     

用可视化方法优化微生物培养基的营养条件

应用可视化方法,对生物发酵培养基的营养条件进行优化.以培养基组成构建多维向量空间,通过降维分析法将多维空间的拓扑结构展现在二维平面上,变成可视化图像,并自动产生目标函数等值线.从中得出同时满足各项指标值的最佳操作区域,并运用逆映射公式将得出最优化区域逆推到原高维空间,进而得到最优培养基组成.以锌酵母为例,介绍可视化方法优化全过程.     

损伤对粘弹性矩形板非线性动力特性的影响

研究了考虑损伤效应的粘弹性矩形板在横向周期载荷作用下的非线性动力学问题·　基于VonKarman方程、Boltzmann叠加原理和连续损伤力学理论,建立了以中面位移表示的考虑损伤效应的粘弹性薄板的非线性动力学方程,然后,应用有限差分法和Newmark法进行求解,并与相应的文献作出了比较·　具体讨论了外载荷参数和板的几何尺寸对含损伤效应的粘弹性板非线性动力响应的影响·　数值结果表明,考虑损伤效应时,结构的非线性动力响应会发生显著的变化·     

Effects of Cone Angles on Nonlinear Vibration Responses of Functionally Graded Shells北大核心CSCD

The nonlinear vibration responses of functionally graded materials (FGMs) shells with different cone angles under external loads were studied. Firstly, the Voigt model was employed to describe the physical properties along the thickness direction of FGMs conical shells. Then, the motion equations were derived based on the 1st-order shear deformation theory, the von Kármán geometric nonlinearity and Hamilton’s principle. Next, the Galerkin method was applied to discretize the motion equations and the governing equations were simplified into a 1DOF nonlinear vibration differential equation under Volmir’s assumption. Finally, the nonlinear motion equations were solved with the harmonic balance method and the Runge-Kutta method, and the amplitude frequency response characteristic curves of the FGMs conical shells were obtained. The effects of different material distribution functions and different ceramic volume fraction exponents on the amplitude frequency response curves of conical shells were discussed. The bifurcation diagrams of conical shells with different cone angles, as well as time process diagrams and phase diagrams for different excitation amplitudes, were described. The motion characteristics were characterized by Poincaré maps. The results show that, the FGMs conical shells present the nonlinear characteristics of hardening springs. The chaotic motions of the FGMs conical shells are restrained and not prone to motion instability with the increase of the cone angle. The FGMs conical shell present a process from the periodic motion to the multi-periodic motion and then to chaos with the increase of the excitation amplitude. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

A power meaning of multiplication: Three eighth graders’ solutions of Cartesian product problems

This article examines data from five teaching episodes with three eighth grade students who were participants in a 3-year constructivist teaching experiment. The five teaching episodes were a transition point in the teaching experiment: the students were beginning to work in contexts that were deemed to support their development of a meaning for squaring quantities—a power meaning of multiplication. Prior to these teaching episodes, the students had worked in contexts that were deemed to support their development of a linear meaning of multiplication.     

大挠度钻柱强度分析的平衡微分方程法

对小井眼、大曲率井中钻柱强度问题 ,以井轴为基准轴 ,在对井轴弯挠描述和钻柱微段三维受力变形分析的基础上 ,建立大位移钻柱平衡微分方程 ,采用Longe_Kutta法解之求内力 ,并依此求应力和建立强度条件·　对H767侧钻水平井施工中钻柱应力计算分析 ,结果说明与有限元模型和弹性化软绳模型比较相吻合 ,该模型比有限元模型计算简捷方便 ;比弹性化软绳模型更完善可信 ;该井钻柱破坏事故愿因在于井眼曲率过大 ,兼有应力集中·     

DNA序列的特征数值及相似性分析

利用2维图表示DNA序列,计算与该图对应的距离矩阵,求出距离矩阵的不变量—距离矩阵主对角线以外的次对角线之和的平均值,进而得到了DNA序列的一种特征数值,利用这种新的特征数值,对DNA序列进行相似性比较,得到了与现有的资料符合很好的结果.     

第二代玉米螟灾变性长期预报模型及其应用

本文应用灰色系统灾变理论，对山东省荷泽地区１９７６～１９９２年第二代玉米螟虫株率构成的离散数列进行数据处理，用微分方程进行拟合，建立了第二代玉米螟虫株率的灰色系统ＧＭ（１，１）长期预报模型，为第二代玉米螟的研究和防治规划提供科学的决策依据     

A simulation study for the distribution law of relative moments of evolution

Nine selection‐survival strategies were implemented in a genetic algorithm experiment, and differences in terms of evolution were assessed. The moments of evolution (expressed as generation numbers) were recorded in a contingency of three strategies (i.e., proportional, tournament, and deterministic) for two moments (i.e., selection for crossover and mutation and survival for replacement). The experiment was conducted for the first 20,000 generations in 46 independent runs. The relative moments of evolution (where evolution was defined as a significant increase in the determination coefficient relative to the previous generation) when any selection‐survival strategy was used fit a Log‐Pearson type III distribution. Moreover, when distributions were compared to one another, functional relationships were identified between the population parameters, revealing a degeneration of the Log‐Pearson type III distribution in a one‐parametrical distribution that can be assigned to the chosen variable—evolution strategy. The obtained theoretical population distribution allowed comparison of the selection‐survival strategies that were used. © 2012 Wiley Periodicals, Inc. Complexity, 2012.     

Application of the method of nondestructive control to investigations of thermal characteristics of crystals

Six crystal samples were examined in the form of anisotropic half-spaces with corresponding arrangement of the directions of anisotropy. The heat sources and measurement devices for the excess temperature were moved about the surfaces of the samples in the given directions with identical velocity. The coefficient of thermal conductivity and the bulk thermal capacity of the crystals possessing straight-line anisotropy were determined.Translated from Matematiceskie Metody i Fiziko-Mekhanicheskie Polya, No. 29, pp. 12–16, 1989.