基于信用支付和现金折扣的变质物品库存模型

本文在供应商提供给零售商定期信用支付和现金折扣情况下,研究了零售商的变质物品最优库存问题。基于信用支付和现金折扣的两种支付条件下,分四种情况建立库存模型,并给出了寻求变质物品最优订购周期和最优付款时间的有效算法。最后,给出算例以及最优解,以说明本模型及求解过程。     

通货膨胀对带有时变需求的变质性物品库存补充策略的影响

本文在考虑通货膨胀的情形下，建立了带有时变需求的变质性物品在有限计划期内的库存补充模型，提供了最优补充次数、最优补充周期长度以及各次补充的最优补充量的一种简单而有效的逼近方法，并用数学例子说明了该方法的实现过程．     

An optimal replenishment policy for deteriorating items with stock-dependent demand and relaxed terminal conditions under limited storage space

This paper deals with the problem of determining the optimal replenishment policy for deteriorating items with stock-dependent demand in which the terminal condition of zero-ending inventory is relaxed. In the model, shortages are allowed and partial backlogging/lost sales. That is, the zero/non-zero ending inventory models are considered simultaneously. The items in stock are displayed to the customers in shelves with limited storage capacity. In theoretical analysis, the necessary and sufficient conditions of the existence and uniqueness of the optimal solutions under various cases are shown. We then also provide a simple algorithm to find the optimal solutions for various situations. Further, a couple of numerical examples are presented to demonstrate the developed model and solution procedure, and several management insights are obtained from the numerical examples. Finally, sensitivity analysis of the optimal solution with respect to major parameters is also carried out.     

Optimal EOQ Models for Deteriorating Items with Time-Varying Demand

In this paper, optimal inventory lot-sizing models are developed for deteriorating items with general continuous time-varying demand over a finite planning horizon and under three replenishment policies. The deterioration rate is assumed to be a constant fraction of the on-hand inventory. Shortages are permitted and are completely backordered. The proposed solution procedures are shown to generate global minimum replenishment schedules for both general increasing and decreasing demand patterns. An extensive empirical comparison using randomly generated linear and exponential demands revealed that the replenishment policy which starts with shortages in every cycle is the least cost policy and the replenishment policy which prohibits shortages in the last cycle exhibited the best service level effectiveness. An optimal procedure for the same problem with trended inventory subject to a single constraint on the minimum service level (maximum fraction of time the inventory system is out of stock during the planning horizon) is also proposed in this paper.     

An inventory model for non-instantaneous deteriorating items with quadratic demand rate and shortages under trade credit policy

noindent In this paper, we propose an appropriate inventory model for non-instantaneous deteriorating items over quadratic demand rate with permissible delay in payments and time dependent deterioration rate. In this model, the completely backlogged shortages are allowed. In several existing results, the authors discussed that the deterioration rate is constant in each cycle. However, the deterioration rate of items are not constant in real world applications. Motivated by this fact, we consider that the items are deteriorated with respect to time. To minimize the total relevant inventory cost, we prove some useful theorems to illustrate the optimal solutions by finding an optimal cycle time with the necessary and enough conditions for the existence and uniqueness of the optimal solutions. Finally, we discuss the numerical instance and sensitivity of the proposed model.     

Economic design of an inventory policy for non-instantaneous deteriorating items under permissible delay in payments

In this paper, Economic Order Quantity (EOQ) based model for non-instantaneous deteriorating items with permissible delay in payments is proposed. This model aids in minimizing the total inventory cost by finding an optimal replenishment policy. In this model shortages are allowed and partially backlogged. The backlogging rate is variable and dependent on the waiting time for the next replenishment. Some useful theorems have been framed to characterize the optimal solutions. The necessary and sufficient conditions of the existence and uniqueness of the optimal solutions are also provided. An algorithm is designed to find the optimal replenishment cycle time and order quantity under various circumstances. Numerical examples are given to demonstrate the theoretical results. Sensitivity analysis of the optimal solution with respect to major parameters of the system has been carried out and the implications are discussed in detail. In the discussions, suggestions are given to minimize the total cost of the inventory system.     

An inventory model for deteriorating items with stock-dependent consumption rate and shortages under inflation and time discounting

This paper derives an inventory model for deteriorating items with stock-dependent consumption rate and shortages under inflation and time discounting over a finite planning horizon. We show that the total cost function is convex. With the convexity, a simple solution algorithm is presented to determine the optimal order quantity and the optimal interval of the total cost function. The results are discussed with a numerical example and particular cases of the model are discussed in brief. A sensitivity analysis of the optimal solution with respect to the parameters of the system is carried out.     

考虑通货膨胀与最长顾客等待时间的变质性物品的库存模型

本文建立了一种考虑通货膨胀与时间价值的变质性物品的库存模型,在模型中允许短缺发生且拖后的需求速率与在缺货期间已经发生的缺货量有关.和已有相关模型的主要区别在于本模型把一个可重复的订货周期内的最大平均利润的净现值作为目标函数,且增加了在缺货期间最长顾客等待时间的限制,以确保库存系统拥有较高的服务水平.然后讨论了模型最优解的存在性与唯一性,并提供了寻求模型整体最优解的算法.最后用实例说明了此模型在实际中的应用.     

需求依赖于展示区库存水平的易腐品订购和转运策略

本文主要研究易腐品零售商的订货和转运策略。零售商的库存分为两部分,即展示区/货架库存和仓库库存。零售商定期向供应商订货,零售商收到订购的商品首先将其中一部分商品存放在展示区中,余下的部分储存在仓库。展示区的空间是有限的,并且需求依赖于展示区商品的库存量。本文首先建立了以平均利润最大化为目标的库存优化模型并对模型最优解的存在性进行了分析,然后得到了求解最优订购量、转运量、转运时间间隔以及再订购点的算法,最后给出了不同参数条件下的算例。     

延期支付条件下允许缺货的变质物品库存模型

在延期支付条件下,建立了缺货量部分拖后的变质物品库存模型,证明了最优解的存在性与唯一性,并给出确定最优订购策略的算法步骤,最后用数值例子验证了模型与算法的有效性.     

Pricing and lot sizing for an EPQ inventory model with rework and multiple shipments

This paper deals with an economic production quantity (EPQ) inventory model with reworkable defective items when a given multi-shipment policy is used. In this work, it is assumed that in each cycle, the rework process of all defective items starts when the regular production process finishes. After the rework process, a portion of reworked items fails. This portion becomes scrap and only the perfect finished items can be delivered to customers at the end of rework process. A profit function is derived to model the inventory problem and it is shown that the profit function is concave. Due to the complexity of the optimization problem, an algorithm is developed to determine the optimal values of manufacturing lot size and price such that the long-run average profit function is maximized. Furthermore, two special cases are identified and explained. Finally, a numerical example is given to illustrate the applicability of the proposed inventory model.     

An application of Genetic Algorithm in solving an inventory model with advance payment and interval valued inventory costs

The purpose of this research is to solve the mixed integer constrained optimization problem with interval coefficient by a real-coded genetic algorithm (RCGA) with ranking selection, whole arithmetical crossover and non-uniform mutation for non-integer decision variables. In the ranking selection, as well as in finding the best solution in each generation of RCGA, recently developed modified definitions of order relations between interval numbers with respect to decision-making are used. Also, for integer decision variables, new types of crossover and mutation are introduced. This methodology is applied to solve a finite time horizon inventory model with constant lead-time, uniform demand rate and a discount by paying an amount of money in advance. Moreover, different inventory costs are considered to be interval valued. According to the consumption of items during lead-time and reorder level, two cases may arise. For each case, the mathematical model becomes a constrained nonlinear mixed integer problem with interval objective. Our objective is to determine the optimal number of cycles in the finite time horizon, lot-size in each cycle and optimal profit. The model is illustrated with some numerical examples and sensitivity analysis has been done graphically with the variation of different inventory parameters.     

Controlling setup cost in (Q, r, L) inventory model with defective items

This study discusses a mixture inventory model with back orders and lost sales in which the order quantity, reorder point, lead time and setup cost are decision variables. It is assumed that an arrival order lot may contain some defective items and the number of defective items is a random variable. There are two inventory models proposed in this paper, one with normally distributed demand and another with distribution free demand. Finally we develop two computational algorithms to obtain the optimal ordering policy. A computer code using the software Matlab is developed to derive the optimal solution and present numerical examples to illustrate the models. Additionally, sensitivity analysis is conducted with respect to the various system parameters.     

Partial backlogging inventory lot-size models for deteriorating items with fluctuating demand under inflation

In this paper, the traditional inventory lot-size model is extended to allow not only for general partial backlogging rate but also for inflation. The assumptions of equal cycle length and constant shortage length imposed in the model developed by Moon et al. [Moon, I., Giri, B.C., Ko, B., 2005. Economic order quantity models for ameliorating/deteriorating items under inflation and time discounting, European Journal of Operational Research 162(3), 773–785] are also relaxed. For any given number of replenishment cycles the existence of a unique optimal replenishment schedule is proved and further the convexity of the total cost function of the inventory system in the number of replenishments is established. The theoretical results here amend those in Yang et al. [Yang, H.L., Teng, J.T., Chern, M.S., 2001. Deterministic inventory lot-size models under inflation with shortages and deterioration for fluctuating demand, Naval Research Logistics 48(2), 144–158] and provide the solution to those two counterexamples by Skouri and Papachristos [Skouri, K., Papachristos, S., 2002. Note on “deterministic inventory lot-size models under inflation with shortages and deterioration for fluctuating demand” by Yang et al. Naval Research Logistics 49(5), 527–529.]. Finally we propose an algorithm to find the solution, and obtain some managerial results by using sensitivity analyses.     

On “An EOQ model for perishable items under stock-dependent selling rate and time-dependent partial backlogging” by Dye and Ouyang

In 2005, Dye and Ouyang proposed an EOQ model for perishable items under stock-dependent selling rate and time-dependent partial backlogging, and then established the unique optimal solution to the problem when building up inventory is not profitable. However, they did not provide the optimal solution to the problem when building up inventory is profitable. In this note, we establish an appropriate model in which building up inventory is profitable, and then provide an algorithm to find the optimal solution to the problem. A numerical example is used to illustrate the proposed model.     

需求受库存影响下具有固定保质期物品的最优订货策略

带有固定保质期物品的订货是供应链终端销售系统的一个重要决策问题,假设需求依赖库存展示水平并考虑"后进先出"的销售策略而建立了相应的库存决策模型,其中物品在固定保质期内仍具有常数的变质速率.然后以系统平均利润最大化为目标讨论了模型最优解的存在性及唯一性,并提供了寻求模型整体最优解的简单方法.最后给出应用实例,并分析了模型参数变化对最优订货策略的影响.     

Optimal inventory policy under power demand pattern and partial backlogging

In this paper, we study an inventory model with a power demand pattern that allows shortages. It is assumed that only a fraction of demand is backlogged during the shortage period and the remainder is considered lost sales. The aim of the paper is to determine the lot size and the length of the inventory cycle that maximize the total inventory profit per unit time. A general approach to obtain the optimal solution of the inventory problem and the maximum associated profit is developed. Some inventory models proposed in the literature are particular cases of the model analyzed here. Numerical examples are included to complement the theoretical results.     

基于二层信用策略的两货栈库存模型

假设供应商向零售商提供信用支付期的同时,零售商也向顾客提供信用支付期,研究了两货栈的变质物品库存模型,并讨论了模型最优解的唯一性,最后给出了最优订购策略的算法步骤与数值例子.     

回收率依赖回收产品质量的再制造EOQ模型

研究回收率依赖回收产品质量情况下制造/再制造混合系统的EOQ模型.该模型假设顾客的需求可通过新产品的制造和回收产品的再制造两种方式满足,且这两种产品无质量差异;需求率是确定的、连续的;总成本包括制造和再制造的固定启动成本,可销售产品和回收品的库存成本,以及缺货成本.当假设缺货成本无限大时给出不允许缺货情况下的模型.给出算例验证模型的有效性.     

A note on the inventory models for deteriorating items with ramp type demand rate

In this research we study the inventory models for deteriorating items with ramp type demand rate. We first clearly point out some questionable results that appeared in (Mandal, B., Pal, A.K., 1998. Order level inventory system with ramp type demand rate for deteriorating items. Journal of Interdisciplinary Mathematics 1, 49–66 and Wu, K.S., Ouyang, L.Y., 2000. A replenishment policy for deteriorating items with ramp type demand rate (Short Communication). Proceedings of National Science Council ROC (A) 24, 279–286). And then resolve the similar problem by offering a rigorous and efficient method to derive the optimal solution. In addition, we also propose an extended inventory model with ramp type demand rate and its optimal feasible solution to amend the incompleteness in the previous work. Moreover, we also proposed a very good inventory replenishment policy for this kind of inventory model. We believe that our work will provide a solid foundation for the further study of this sort of important inventory models with ramp type demand rate.