离散的SI和SIS传染病模型的研究

为了描述个体的死亡、染病者的恢复以及疾病的传染,引入了相应的概率.基于总种群中个体数量为常数的假设,根据染病者能否恢复分别建立了具有生命动力学的离散SI和SIS传染病模型.所得到的结果显示:它们具有与相应连续模型相同的动力学性态,并确定了各自的阈值.在它们的阈值之下,传染病最终将灭绝;在它们的阈值之上,传染病将会发展成为地方病,染病者的数量将趋向于一确定的正常数.     

海洋波导的可穿透障碍物散射场远场分布的若干性质

研究了海洋波导中可穿透目标时谐声波散射传播远场分布的性质,构造了透射问题解的集合,使得所构造解的集合在边界上的限制在某个Hilbert空间中是稠密的,确定了传播远场分布的集合在某个Hilbert空间中是完备的.这些性质对研究海洋波导中的逆透射问题有重要的应用.     

高中数学专题研究的一个案例──关于沪闵路─春申路口红绿灯时间设置合理性的研究

一、专题的背景与分析 　　1. 背景 　　闵行区的沪闵路─春申路口是交通特别拥挤的交叉路口之一.家住莘庄地区的同学有一个共同的感受,在他们到校或回家路上必经的沪闵路─春申路口时常遇到塞车现象.……     

报童模型及ARMA预测在航空配餐问题中的应用

航班承载人数的不确定性,造成航空公司在配餐中利润的流失,现存的配餐模式存在较多的浪费.本文利用基于损失厌恶的报童模型和ARMA时间序列分析模型对深圳航空公司某航班的配餐份数进行了建模分析和预测,并通过对两种模型输出的比较,得出了长期预测与短期预测的模型应用理论.将实际的历史数据代人到模型中验证,其结果优于经验模式下的配餐盈利情况.本文所采用的研究方法和研究结果对航空公司的精益发展有建设性的意义.     

巧解一道"牛吃草"问题

"牛吃草"问题又称为消长问题,是17世纪英国伟大的科学家牛顿提出来的.典型牛吃草问题的条件是假设草的生长速度固定不变,不同头数的牛吃光同一片草地所需的天数各不相同,求若干头牛吃这片草地可以吃多少天.由于吃的天数不同,草又是天天在生长的,所以草的存量随吃的天数不断地变化.……     

大钟与六位密码

福尔摩西接到电话的时候正在翻看一本关于城中富翁艾伦王的传奇故事。艾伦王年少时靠贩卖廉价的小闹钟起家,经过几十年的辛勤努力,把自己的事业拓展成了最有名的钟表公司,是本市最有名的富翁。艾伦王年纪已经很大了,身体也不好。他的儿女众多,但是他们和艾伦王的关系并不融洽。大家都猜测他们对艾伦王的财富虎视眈眈。"喂,福尔摩西吗?"约翰焦急的声音从电话那头传过来。"是我。"福尔摩西回应道。     

Drucker-Prager准则可靠度解析

视岩体强度参数为正态分布随机变量,以可靠度理论为基础,推导了Drucker-Prager准则可靠度判别的解析表达式,并通过Monte-Carlo法和一次可靠度方法验证了其正确性.应用所得到的公式分析了岩体强度参数的变异性对屈服准则判别结果的影响.结果表明,强度参数的变异性对Drucker-Prager准则可靠概率的影响程度不尽相同,在变异系数较大的情况下,它们对可靠概率的影响显著,不可忽略.为岩体屈服的可靠度判别提供了一条新思路.     

也谈立体几何中的轨迹问题——从一道调考试题说起

2010-2011学年度武汉市部分学校新高三起点调研测试的一道试题引起了我的注意.原题如下: 在正四面体P-ABC中,M为△ABC内(含边界)一动点,且点M到三个侧面PAB,PBC,PCA的距离成等差数列,则点M的轨迹是 A.一条线段 B.椭圆的一部分 C.双曲线的一部分 D.抛物线的一部分     

昆虫拍动翅的非定常变形对其气动力的影响

通过在动态变形网格上求解N-S方程的方法,研究了昆虫拍动翅的非定常变形对其气动力的影响.其中,拍动翅的扭转变形对气动力影响很小,拱形变形则会产生显著的影响,扭转和拱形组合变形的效果与拱形变形单独的效果基本相同.在6%拱形和20度扭转组合变形的情况下(此为对大量昆虫观察所得到的典型值),相对于无变形平板翅,升力增加了10～20%,升阻比增加了约10%.翅膀的变形可增大最大升力系数;同时,可减小飞行的能耗,例如,对于做悬停飞行的熊蜂,其翅膀的动态变形(6%拱形和20度扭转组合变形)使其飞行中的能耗比无变形情况降低了约16%.     

导数在高考命题中的"五大"热点

导数作为大学的重要内容,进入中学数学教材后,给传统的内容注入了生机与活力,为中学数学命题的研究提供了新视角,新方法.由于导数是研究函数性质的一个很好的工具,它的用途十分广泛,它在解决函数、不等式、解析几何等问题有独到的功能.因此,近几年的高考正逐年加大对导数问题的考查力度,本文通过对07年全国各地高考题的整理和分析寻找命题规律,希望能对今后的教学提供一点复习思路.……     

Boundary-Value Problems of the Theory of Thin and Nonthin Orthotropic Shells with Account of Nonlinearly Elastic Properties and Low Shear Rigidity of Composite Materials

The basic geometric and physical relations and resolving equations of the theory of thin and nonthin orthotropic composite shells with account of nonlinear properties and low shear rigidity of their materials are presented. They are derived based on two theories, namely the theory of anisotropic shells employing the Timoshenko or Kirchhoff-Love hypothesis and the nonlinear theory of elasticity and plasticity of anisotropic media in combination with the Lagrange variational principle. The procedure and algorithm for the numerical solution of nonlinear (linear) problems are based on the method of successive approximations, the difference-variational method, and the Lagrange multiplier method. Calculations of the stress-strain state for a spherical shell with a circular opening loaded with internal pressure are presented. The effect of transverse shear strains and physical nonlinearity of the material on the distribution of maximum deflections and circumferential stresses in the shell, obtained according to two variants of the shell theories, is studied. A comparison of the results of the problem solution in linear and nonlinear statements with and without account of the shell shear strains is given. The numerical data obtained for thin and nonthin (medium thick) composite shells are analyzed.     

Utilization and maintenance in a model with scrapping

We consider a productive asset, called equipment or capital good, and we examine the properties of, as well as the interactions between, the operating policies, which are determined by its optimal utilization and maintenance, and the capital policy of scrapping, which defines the optimal time when the productive asset is retired from its current use. Starting with an abstract model and using the approach of optimal control, initially we characterize the various types of equipment by assigning to them a single total profit index, which indicates how the above policies affect the flow of operating revenues plus capital gains or losses. This index is a function of market-determined prices. So using it we then investigate how the operating and capital policies are influenced by the rate of discount, the price of new equipment, and the rise or fall of the price of new equipment relative to the value of its output. Among other interesting results, we find that the effects of these prices on the nature and interactions of optimal policies depend crucially on whether the equipment is of the usual profit making type, where output is the main source of revenue, or of the antique type, where the main source of revenue is capital gains.     

On a class of Riemann surfaces

It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

On the hyperbolicity of the period-doubling fixed point

We give a new proof of the hyperbolicity of the fixed point for the period-doubling renormalization operator using the local dynamics near a semi-attractive fixed point (in a Banach space) and the theory of holomorphic motions. We also give a new proof of the exponential contraction of the Feigenbaum renormalization operator in the hybrid class of the period-doubling fixed point: our proof uses the non-existence of invariant line fields in the period-doubling tower (C. McMullen), the topological convergence (D. Sullivan), and a new infinitesimal argument.

     

颤振分析中的特征值排序问题

颤振分析中判断颤振临界速度的重要依据是系统V-g和V-f图,即系统特征值随参数的变化曲线.在几乎所有商用软件及自编程序的输出结果中,有时会出现所谓的"窜支"现象,这给颤振临界速度和颤振穿越分支及耦合形式的判断带来很大不便.通过隐函数定理可以证明,除重特征值点以外,系统特征值连续依赖于系统参数变化.依据多元向量值函数连续性,建立对特征值的排列算法,给出系统特征根轨迹的正确曲线,再输出V-g和V-f图数据,从而避免"窜支"现象.编制应用程序,通过几个典型算例对算法进行了验证.该工作能够有效简化颤振分析的后处理工作,提高分析效率.     

Effects of permeability and viscosity in linear polymeric gels

We propose and analyze a mathematical model of the mechanics of gels, consisting of the laws of balance of mass and linear momentum of the polymer and liquid components of the gel. We consider a gel to be an immiscible and incompressible mixture of a nonlinearly elastic polymer and a fluid. The problems that we study are motivated by predictions of the life cycle of body‐implantable medical devices. Scaling arguments suggest neglecting inertia terms, and therefore, we consider the quasi‐static approximation to the dynamics. We focus on the linearized system about stress‐free states, uniform expansions, and compressions and derive sufficient conditions for the solvability of the time‐dependent problems. These turn out to be conditions that guarantee local stability of the equilibrium solutions. We also consider non‐stress free equilibria and states with residual stress and derive an energy law for the corresponding time‐dependent system. The conditions that guarantee stability of solutions provide a selection criteria of the material parameters of devices. The boundary conditions that we consider are of two types, displacement‐traction and permeability of the gel surface to the fluid. We address the cases of viscous and inviscid solvent, assume Newtonian dissipation for the polymer component, and establish existence of weak solutions for the different boundary permeability conditions and viscosity assumptions. We present two‐dimensional, finite element numerical simulations to study stress concentration on edges, this being the precursor to debonding of the gel from its substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

树脂基复合材料粘接的优化设计

本文在试验数据和理论分析的基础上，提出树脂基复合材料单搭接的优化设计的原则，胶粘剂的选择、被粘物的设计，粘接长度的选择、胶层厚度的选择等．认为通过优化设计可以提高粘接强度，减轻产品的重量，提高其质量．     

On matrix analogs of Fermat’s little theorem

The theorem proved in this paper gives a congruence for the traces of powers of an algebraic integer for the case in which the exponent of the power is a prime power. The theorem implies a congruence in Gauss’ form for the traces of the sums of powers of algebraic integers, generalizing many familiar versions of Fermat’s little theorem. Applied to the traces of integer matrices, this gives a proof of Arnold’s conjecture about the congruence of the traces of powers of such matrices for the case in which the exponent of the power is a prime power.     

拍卖机制设计在区块链中的应用与挑战

区块链是新一代信息技术的重要组成部分,是分布式网络、加密技术、智能合约等多种技术集成的新型数据库软件。过去的十多年,区块链技术在全球范围内产生广泛影响。如今的区块链技术,已从最初的关注于解决货币和支付的去中心化问题,转入到解决市场的去中心化问题。智能合约的出现使得基于区块链技术的去中心化金融进入高速发展状态,也涌现出区块链环境下的各类拍卖场景。本文首次从机制设计角度,以区块链交易费机制,非同质化代币(Non-Fungible Token,NFT)拍卖和矿工可提取价值(Miner-Extractable Value,MEV)交易位置拍卖为主要对象,总结和剖析近些年来区块链上特有的拍卖机制;并针对区块链特性,提出区块链上拍卖机制设计所面临的挑战和未来亟待解决的问题。