汽车振动参数最佳匹配的正交设计

设计目标 汽车行驶平顺性与车身加速度(z)的方差σ2z有关。为使平顺性好,就希望σ2z的值较小。而σ2z又与汽车的车身、车轮两个自由度系统的振动参数有关。这振动参数共有四个: 车身固有频率ω。 车身相对阻尼系数ψ 质量比叫 刚度比γ(Ct/C)式中 M:车身质量; m:车轮质量; K:汽     

二阶线性时滞微分方程的广义振动性

本文主要研究了二阶线性时滞微分方程的广义振动性和广义非振动性,给出了方程广义振动和广义非振动的一些判定定理,同时给出了一类方程广义非振动的充要条件.     

脉冲中立型时滞抛物方程的振动性

本文研究了一类脉冲中立型时滞抛物方程解的振动性及强振动性,获得了此类脉冲中立型时滞抛物方程解振动和强振动的代数判据.     

一类自变量分段连续的非线性延迟微分方程数值解振动性

主要考虑一类自变量分段连续的非线性延迟微分方程数值解的振动性.主要通过线性化的理论将非线性方程的振动性转化为线性方程的振动性,从而得到数值解振动的条件,进而得到线性θ-方法保持方程振动性的条件.为了更有力的说明我们的结果,最后给出了相应的算例.     

一类二阶线性微分方程的振动性及非振动性

本文研究了二阶线性方程的振动性及非振动性问题，建立了若干新的振动与非振动性结果，它们改进并推广了若干已知的定理。     

一类二阶非线性差分方程的振动性与渐近性

研究了一类二阶非线性差分方程解的振动性与渐近性,建立了三个新的振动性与渐近性定理,推广和改进了已知的一些结果.     

一个二阶方程的振动性质及其应用

本文研究了一个二阶微分方程的解及其振动性质,利用它获得了一般二阶自共轭方程的振动性判别准则,特别对其中一类二阶微分方程的振动性给出了定量的判别方法.推广了E.Hille的工作,使E.Hille的研究结论成为本文结果的极特殊的情形,同时对一类具有“积分小”系数或可化为具有“积分小”系数的二阶微分方程的振动性与非振动性给出了简便、精确的判别方法.     

二阶非线性摄动微分方程解的振动性与渐近性

研究了一类二阶非线性摄动微分方程解的振动性与渐近性,建立了四个新的振动性与渐近性定理,推广和改进了已知的一些结果.     

非线性中立型泛函微分方程组的非振动解的存在性准则

本文利用 Banach 锥理论首次建立了非线性中立型泛函微分方程组的非振动解的存在性准则;同时,还给出了非线性高阶中立型方程的振动性和非振动性定理.     

高阶中立型方程振动性的比较定理及应用

在本文中,我们首先对一类形式相当一般的高阶中立型时滞微分方程建立了关于振动性的比较定理。这类比较定理,把中立型时滞微分方程振动性的判别化为非中立型时滞微分方程振动性的判别问题。然后,应用我们所建立的比较定理,建立了一系列关于高阶中立型时滞微分方程振动性的判别定理。     

关于拟P-内射模的一些注记(英文)

设 R是一个环 .一个右 R-模 M叫做拟 P-内射的 ,如果 M的每个 M-循环子模到 M的任一个 R-同态都能扩展到 M.假设 M是一个自生成子的拟 P-内射模 .在这篇文章中 ,我们表明如果这样一个模是一个 CF-模 (特别地 ,CS-模 ) ,那么 S/J(S)是正则的 ,其中 S=End(MR) .进一步 ,如果 S是半素环 ,那么 M的每个极大核是 M的一个直和项 .这些结果扩展了 P-内射环的一些结果     

关于一类极大子群的θ-偶

对于有限群G的极大子群M，令β（G：M）表示整除│G：M│的素因子个数，β（G）表示所有β（G；M）中的最大数．令μ（G）为使得β（G：M）=β（G）的极大子群的集合．通过对这一类极大子群的θ-偶赋予一定条件，得到了判断群G可解、超可解的新结果．     

Comparative analysis for the N policy M/G/1 queueing system with a removable and unreliable server

In this paper we analyze a single removable and unreliable server in the N policy M/G/1 queueing system in which the server breaks down according to a Poisson process and the repair time obeys an arbitrary distribution. The method of maximum entropy is used to develop the approximate steady-state probability distributions of the queue length in the M/G(G)/1 queueing system, where the second and the third symbols denote service time and repair time distributions, respectively. A study of the derived approximate results, compared to the exact results for the M/M(M)/1, M/E₂(E₃)/1, M/H₂(H₃)/1 and M/D(D)/1 queueing systems, suggest that the maximum entropy principle provides a useful method for solving complex queueing systems. Based on the simulation results, we demonstrate that the N policy M/G(G)/1 queueing model is sufficiently robust to the variations of service time and repair time distributions.     

有限群的Deskins极大完备

对于有限群G的一个极大予群M,Deskins称子群C为M的一个完备,如果C(?)M,但C的G-不变真子群包含在M中.令I(M)表示M的所有完备之集. I(M)的一个极大元叫做M的一个极大完备.利用极大完备,本文获得关于群的可解性和超可解性某些新的刻划.     

ON EULER CHARACTERISTIC OF MODULES~(**)

This paper gives a characteristic property of the Euler characteristic for IBN rings. The following results: are proved. (1) If R is a commutative ring, M, N are two stable free R-modules, then χ(MN)=χ(M)χ(N), where χ denotes the Euler characteristic. (2) If f: K_0(R)→Z is a ring isomorphism, where K_0(R) denotes the Grothendieck group of R, K_0(R) is a ring when R is commutative, then f([M])=χ(M) and χ(MN)=χ(M)χ(N) when M, N are finitely generated projective R-modules, where.the isomorphism class [M] is a generator of K_0(R). In addition, some applications of the results above are also obtained.     

Cofiniteness of Lo cal Cohomology Mo dules with Resp ect to a Pair of Ideals

Let R be a commutative Noetherian ring, I and J be two ideals of R, and M be an R-module. We study the cofiniteness and finiteness of the local cohomology module HiI,J（M） and give some conditions for the finiteness of HomR（R/I, HsI,J（M）） and Ext1R（R/I, HsI,J（M））. Also, we get some results on the attached primes of HdimMI,J （M）.     

Sobolev Spaces with Respect to Measures in Curves and Zeros of Sobolev Orthogonal Polynomials

In this paper we obtain some practical criteria to bound the multiplication operator in Sobolev spaces with respect to measures in curves. As a consequence of these results, we characterize the weighted Sobolev spaces with bounded multiplication operator, for a large class of weights. To have bounded multiplication operator has important consequences in Approximation Theory: it implies the uniform bound of the zeros of the corresponding Sobolev orthogonal polynomials, and this fact allows to obtain the asymptotic behavior of Sobolev orthogonal polynomials. We also obtain some non-trivial results about these Sobolev spaces with respect to measures; in particular, we prove a main result in the theory: they are Banach spaces. J.M. Rodriguez supported in part by three grants from M.E.C. (MTM 2006-13000-C03-02, MTM 2006-11976 and MTM 2007-30904-E), Spain, and by a grant from U.C.III M./C.A.M. (CCG07-UC3M/ESP-3339), Spain. J.M. Sigarreta supported in part by a grant from M.E.C. (MTM 2006-13000-C03-02), Spain, and by a grant from U.C.III M./C.A.M. (CCG07-UC3M/ESP-3339), Spain.     

A BROWN-McCOY RADICAL FOR T-RINGS

Abstract

A notion of G-regularity is introduced for a Γ-ring M, and from this notion a Brown-McCoy radical, B(M) is defined. B(M) is shown to be a radical in the sense of Kurosh and Amitsur, and analogies of various well-known results on the Brown-McCoy radical of a ring are proved. A “right” Brown McCoy radical, B'(M) can also be defined. In general, B(M) ? B'(M).     

分次可除模

对于Ｇ—分次环Ｒ，我们证明如下结论：（１）若Ｒ是分次正则环，则Ｒ上的任一分次左Ｒ—模都是分次可除模；（２）若Ｒ分次非退化且Ｍ是分次可除左Ｒ—模，则Ｍｅ是可除左Ｒｅ—模；（３）若Ｇ是有序群，Ｍ是可除左Ｒ—模，则Ｍ～和Ｍ～是分次可除左Ｒ—模，其中Ｍ为分次左Ｒ—模Ｎ的子模