Optimal production and shipment models for a single-vendor–single-buyer integrated system

This paper develops a more general production-inventory model for a single-vendor–single-buyer integrated system. Unlike the hitherto existing production-inventory models for the vendor–buyer system, the present model neither requires the buyer’s unit holding cost greater than the vendor’s nor assumes the structure of shipment policy. Secondly, the model is extended to the situation with shortages permitted, based on shortages being allowed to occur only for the buyer. Thirdly, the paper also presents a corresponding production-inventory model for a deteriorating item for the integrated system. The solution procedures are provided for finding the optimal production and shipment policies and illustrated with numerical examples. Three significant insights are shown: (1) no matter whether the buyer’s unit holding cost is greater than the vendor’s or not, the present model always performs best in reducing the average total cost as compared to the hitherto existing models; (2) if the buyer’s unit holding cost is less than the vendor’s, the optimal shipment policy for the integrated system will only comprise shipments with successive shipment sizes increasing by a fixed factor. It is different from that obtained by Hill [Hill, R.M., 1999. The optimal production and shipment policy for the single-vendor single-buyer integrated production-inventory problem. International Journal of Production Research 37, 2463–2475] for the opposite case; (3) when designing a single-vendor–single-buyer integrated system, making the buyer’s unit holding cost lower than the vendor’s is more beneficial to the system if shortages are not permitted to occur; otherwise it just reverses.     

Manufacturer-buyer coordination for newsvendor-type-products with two ordering opportunities and partial backorders

In a recent paper [Weng, Z.K., 2004. Coordinating order quantities between the manufacturer and the buyer: A generalized newsvendor model. European Journal of Operational Research 156, 148–161], a newsvendor-type coordination model was developed for a single-manufacturer single-buyer channel with two ordering opportunities. This paper further extends the model to the case where the excess demand after the first order is partially backlogged and both parties share the manufacturing setup cost of the second order (if happened). We show that the decentralized system would perform best if the manufacturer covers utterly the second production setup cost, which is opposite to that obtained in Weng (2004). Another extension in the present paper is that in the centralized system, the second order decision is made by the buyer based on the channel’s benefit rather than based on the buyer’s benefit as in Weng (2004). It is proved that the expected profit of the system in our paper is always larger than that in Weng (2004). In order to maximize the expected profit of the channel, two coordinated policies are proposed to achieve perfect coordination: a two-part-tariff policy for the special case that the buyer pays all the manufacturing setup cost, and a revised revenue-sharing contract for the case that two parties share the manufacturing setup cost.     

Single-supplier/multiple-buyer supply chain coordination: Incorporating buyers’ expectations under vertical information sharing

We address the coordination problem in a single-supplier/multiple-buyer supply chain. The supplier wishes to coordinate the supply chain by offering quantity discounts. To obtain their complete cost information, the supplier exchanges his own cost parameters with buyers leading to vertical information sharing. The supplier thinks that the buyers, as they have access to supplier’s setup and holding cost information, may demand a portion of the anticipated coordination savings based on the partial information they hold about the cost structure of the entire supply chain. We model each buyer’s expectations based on her limited view of the entire supply chain which consists of herself and the supplier only. These expectations are then incorporated into the modeling of the supply chain, which results in a generalization of the traditional Stackelberg type models. We discuss alternative efficiency sharing mechanisms, and propose methods to design the associated discount schemes that take buyers’ expectations into account. In designing the discount schemes, we consider both price discriminatory and non-price discriminatory approaches. The study adds to the existing body of work by incorporating buyers’ expectations into a constrained Stackelberg structure, and by achieving coordination without forcing buyers to explicitly comply with the supplier’s replenishment period in choosing their order quantities. The numerical analysis of the coordination efficiency and allocation of the net savings of the proposed discount schemes shows that the supplier is still able to coordinate the supply chain with high efficiency levels, and retain a significant portion of the net savings.     

Integrated scheduling and batch ordering for construction project

Multi-Mode Resource Constrained Project Scheduling Problem and material batch ordering for construction project are integrated to help project manager consider various trade-offs among several costs, such as renewable resources’ cost, material price, ordering cost, back-ordering cost, inventory holding cost and reward/penalty for early/late project completion. Therefore, we prove a mixed integer programming model and impel to calculate inventory holding cost and back order cost in objective function. Moreover, a hybrid algorithm combined adapted harmony search and genetic algorithm is proposed correspondingly. In order to inherit elitist solution and maintain population’s diversity simultaneously, we add a selection operator when the harmony memory is initialized and modify the replacement operator based on distance. Besides, genetic algorithm is adopted based on a ‘012’ coding scheme. Finally, algorithm and model performance is presented and several project instances are provided with different network structures and realizations to discuss the factors on total cost.     

To reveal or not to reveal? Strategic disclosure of private information in negotiation

Within the bargaining literature, it is widely held that negotiators should never reveal information that will lead to disclosure of their reservation prices. We analyze a simple bargaining and search model in which the informed buyer can choose to reveal his cost of searching for an outside price (which determines his reservation price) to the uninformed seller. We demonstrate that buyers can be made better off by revealing their search cost. More interestingly, we also find that, depending on the assumed distribution of search costs, sometimes buyers with relatively low search costs should reveal their private information whereas in other cases buyers with relatively high search costs should do so. We then test our model experimentally and find that subjects’ behavior is not entirely consistent with theoretical predictions. In general, bargainers’ behavior is better explained by a bounded rationality model similar to “fictitious play”.     

Scattered and track data interpolation using an efficient strip searching procedure

A new local algorithm for bivariate interpolation of large sets of scattered and track data is presented. The method, which changes partially depending on the kind of data, is based on the partition of the interpolation domain in a suitable number of parallel strips, and, starting from these, on the construction for any data point of a square neighbourhood containing a convenient number of data points. Then, the well-known modified Shepard’s formula for surface interpolation is applied with some effective improvements. The proposed algorithm is very fast, owing to the optimal nearest neighbour searching, and achieves good accuracy. Computational cost and storage requirements are analyzed. Moreover, the efficiency and reliability of the algorithm are shown by several numerical tests, also performed by Renka’s algorithm for a comparison.     

A note on “Two-warehouse inventory model with deterioration under FIFO dispatch policy”

A recently published paper by Lee [C.C. Lee, Two-warehouse inventory model with deterioration under FIFO dispatching policy, European Journal of Operational Research 174 (2006) 861–873] considers different dispatching models for the two-warehouse inventory system with deteriorating items, in which Pakkala and Achary’s LIFO (last-in–first-out) model [T.P.M. Pakkala, K.K. Achary, A deterministic inventory model for deteriorating items with two warehouses and finite replenishment rate, European Journal of Operational Research 57 (1992) 71–76] is first modified, and then the author concludes that the modified LIFO model always has a lower cost than Pakkala and Achary’s LIFO model under a particular condition specified by him. The present note points out that this conclusion is incorrect and misleading. Alternatively, we provide a new sufficient condition such that the modified LIFO model always has a lower cost than Pakkala and Achary’s model. Besides, we also compare Pakkala and Achary’s original LIFO model with Lee’s FIFO (first-in–first-out) model for the special case where the two warehouses have the same deteriorating rates. Finally, numerical examples are provided to investigate and examine the impact of corresponding parameters on policy choice. The results in this note give a much clearer picture than those at Lee’s paper about the relationships between the different dispatching policies for the two-warehouse inventory system with deterioration items.     

Coordinating ordering and pricing decisions in a two-stage distribution system with price-sensitive demand through short-term discounting

We consider a short-term discounting model in which the distributor offers a discounted price for the retailers’ orders placed at the beginning of its replenishment cycle, in a non-cooperative distribution system with one distributor and multiple retailers, each facing price-sensitive demand. We examine the value of the price discount strategy as a mechanism for the distributor to coordinate the retailers’ ordering and pricing decisions under two common types of demand, linear demand in price and constant elasticity demand in price. Our numerical study reveals that, in the presence of homogeneous retailers (namely, retailers with identical demand rates), the distributor’s profit improvement due to coordination generally decreases as the number of retailers or the inventory holding cost rate increases, but increases as price elasticity increases. Although an increase in the inventory holding cost rate has a negative effect on the distributor’s profit, it may have a positive effect on the retailers’ profits. We further find that with heterogeneous retailers (namely, retailers with different demand rates), offering a discounted price under linear demand benefits the distributor when both the inventory holding cost rate and the variation in demand are either small or large. This cross effect, however, is absent under constant elasticity demand.     

Parallel machines scheduling to minimize job tardiness and machine deteriorating cost with deteriorating jobs

This paper studies the parallel machines bi-criteria scheduling problem (PMBSP) in a deteriorating system. Sequencing and scheduling problems (SSP) have seldom considered the two phenomena concurrently. This paper discusses the parallel machines scheduling problem with the effects of machine and job deterioration. By the machine deterioration effect, we mean that each machine deteriorates at a different rate. This deterioration is considered in terms of cost which depends on the production rate, the machine’s operating characteristics and the kind of work done by each machine. Moreover, job processing times are increasing functions of their starting times and follow a simple linear deterioration. The objective functions are minimizing total tardiness and machine deteriorating cost. The problem of total tardiness on identical parallel machines is NP-hard, thus the problem with machine deteriorating cost as an additional term is also NP-hard. We propose the LP-metric method to show the importance of our proposed multi-objective problem. A metaheuristic algorithm is developed to locate optimal or near optimal solutions based on a Tabu search mechanism. Numerical examples are presented to show the efficiency of this model.     

A note on an economic order quantity model and Taguchi’s cost of poor quality

Tsou [Appl. Math. Model. 31 (2) (2007) 283–291] previously proposed an economic order quantity model with Taguchi’s cost of poor quality. In this note, we correct an error appearing in their numerical results and provide some simple formulas that can be applied to numerical studies with the specific objective of calculating the defective rate and the total profit of his model.