The collagen type I segment long spacing (SLS) and fibrillar forms: Formation by ATP and sulphonated diazo dyes

The collagen type I segment long spacing (SLS) crystallite is a well-ordered rod-like molecular aggregate, ∼300 nm in length, which is produced in vitro under mildly acidic conditions (pH 2.5–3.5) in the presence of 1 mM ATP. The formation of the SLS crystallite amplifies the inherent linear structural features of individual collagen heterotrimers, due to the punctate linear distribution and summation of the bulkier amino acid side chains along the length of individual collagen heterotrimers. This can be correlated structurally with the 67 nm D-banded collagen fibril that is found in vivo, and formed in vitro. Although first described many years ago, the range of conditions required for ATP-induced SLS crystallite formation from acid-soluble collagen have not been explored extensively. Consequently, we have addressed biochemical parameters such as the ATP concentration, pH, speed of formation and stability so as to provide a more complete structural understanding of the SLS crystallite. Treatment of collagen type I with 1 mM ATP at neutral and higher pH (6.0–9.0) also induced the formation of D-banded fibrils. Contrary to previous studies, we have shown that the polysulphonated diazo dyes Direct red (Sirius red) and Evans blue, but not Congo red and Methyl blue, can also induce the formation of SLS-like aggregates of collagen, but under markedly different ionic conditions to those employed in the presence of ATP. Specifically, pre-formed D-banded collagen fibrils, prepared in a higher than the usual physiological NaCl concentration (e.g. 500 mM NaCl, 20 mM Tris-HCl pH7.4 or x3 PBS), readily form SLS aggregates when treated with 0.1 mM Direct red and Evans blue, but this did not occur at lower NaCl concentrations. These new data are discussed in relation to the anion (Cl⁻) and polyanion (phosphate and sulphonate) binding by the collagen heterotrimer and their likely role in collagen fibrillogenesis and SLS formation.     

Collagen fibers evaluation after rhBMP-2 insertion in critical-sized defects

The objective of this investigation was to assess the quantity of collagen fibers with different dosages of recombinant human bone morphogenetic protein, type 2 (rhBMP-2) associated with two different carriers, monoolein and poloxamer gels, in critical bone defects created in the calvaria of Wistar rats. Forty male adult Wistar rats were divided into eight groups of 5 animals each—group I: critical bone defect with application of 1 μg of rhBMP-2 combined with monoolein gel; group II: 3 μg of rhBMP-2 combined with monoolein gel; group III: 7 μg of rhBMP-2 combined with monoolein gel; group IV: 1 μg of rhBMP-2 combined with poloxamer gel; group V: 3 μg of rhBMP-2 combined with poloxamer gel; group VI: 7 μg of rhBMP-2 combined with poloxamer gel; group VII: monoolein gel only and group VIII: poloxamer gel only. A critical-sized defect of 6 mm diameter was produced in the left parietal bone using a surgical round bur and a high-speed micromotor. The bone defects were filled according to the group that animals belonged and after two weeks the rats were perfused and their calvarial bones were removed for histological processing, and collagen fibers quantification. Differences among the eight groups were statistically analyzed by Anova and Bonferroni test (p < 0.05). The results did not show statistical difference between the groups, in exception, between the comparisons II and III. According to the experimental methodology used in this research, it was observed, in a general way, a qualitative inverse relationship between collagen fibers presence and rhBMP-2 quantity inserted in the critical bone defect, associated or not to a material carrier.     

Structure relates to elastic recoil and functional role in quadriceps tendon and patellar ligament

Tendons and ligaments have similar but slightly different structure and composition. Crimps of tendons and ligaments are morphological structures related to the elastic functional properties of these connective tissues. Aim of this study was to investigate the morphological arrangement of collagen fibres, fibrils and crimping pattern of suprapatellar (rectus femoris tendon-RFT and vastus intermedius tendon-VIT) and infrapatellar connective tissues (patellar ligament-PL) to relate their structural aspects to their common function role of leg extension. RFT, VIT and PL were removed from knees of Sprague–Dawley rats and light and electron microscopy (TEM and SEM) performed. Sagittal sections showed that collagen array and crimping pattern were similar in RFT and PL but differed from VIT. Morphometric analysis confirmed that crimp number was about the same in RFT and PL (5.4 ± 1.4 and 6.1 ± 2.8 respectively), but it was almost three times higher in VIT (14.5 ± 4.7). Similarly crimp top angle in RFT and PL (141.5 ± 15.0° and 146.2 ± 12.2° respectively) was significantly higher than in VIT (122.3 ± 14.8°) and the crimp base length was more than twice as wide in RFT (75.5 ± 22.6 μm) and PL (72.3 ± 28.9 μm) than in VIT (36 ± 14.1 μm). The smaller, fewer and most crimped crimps in VIT show that this tendon has a greater elastic recoil and responds to higher forces as among quadriceps muscles the vastus intermedius belly contributes the most during knee extension. By contrast, RFT acting as a “stopper” tendon also plays a ligament role by limiting an excessive flexion of the joint during postural rest position of the knee.     

Extracellular production of α-amylase during fed-batch cultivation of recombinant Escherichia coli using pulsed electric field

In this study, extracellular release of recombinant α-amylase from Escherichia coli HB101/pHI301A by high-voltage pulsed electric field (PEF) was demonstrated during fed-batch cultivation. A continuous PEF treatment from the beginning of cultivation caused a decrease in cell growth rate and productivity of α-amylase, although a small quantity of extracellular α-amylase was detected in the culture supernatant. On the other hand, when PEF (12 kV, 3 Hz) was applied intermittently (each for 30 min with an interval of 30 min) from the beginning of stationary phase, the amount of α-amylase released was about 30% of the total amount of α-amylase that was produced in the cells. The release ratio and the total amount of α-amylase released were higher than that of batch cultivation. Suitable PEF treatment can be useful for easy and effective extracellular release of periplasmic proteins by fed-batch cultivation of recombinant E. coli.     

Ultrastructural analysis of the low level laser therapy effects on the lesioned anterior tibial muscle in the Gerbil

Low level laser therapy (LLLT) is known for its positive results but studies on the biological and biomodulator characteristics of the effects produced in the skeletal muscle are still lacking. In this study the effects of two laser dosages, 5 or 10 J/cm², on the lesioned tibial muscle were compared. Gerbils previously lesioned by 100 g load impact were divided into three groups: GI (n = 5) controls, lesion non-irradiated; GII (n = 5), lesion irradiated with 5 J/cm² and GIII (n = 5), lesion irradiated with 10 J/cm², and treated for 7 consecutive days with a laser He–Ne (λ = 633 nm). After intracardiac perfusion, the muscles were dissected and reduced to small fragments, post-fixed in 1% osmium tetroxide, dehydrated in increasing alcohol concentrations, treated with propylene oxide and embedded in Spurr resin at 60 °C. Ultrafine cuts examined on a transmission electron microscope (Jeol 1010) revealed in the control GI group a large number of altered muscle fibers with degenerating mitochondria, intercellular substance containing degenerating cell fragments and budding blood capillaries with underdeveloped endothelial cells. However, groups GII and GIII showed muscle fibers with few altered myofibrils, regularly contoured mitochondria, ample intermembrane spaces and dilated mitochondrial crests. The clean intercellular substance showed numerous collagen fibers and capillaries with multiple abluminal processes, intraluminal protrusions and several pinocytic vesicles in endothelial cells. It was concluded that laser dosages of 5 or 10 J/cm² delivered by laser He–Ne (λ = 633 nm) during 7 consecutive days increase mitochondrial activity in muscular fibers, activate fibroblasts and macrophages and stimulate angiogenesis, thus suggesting effectivity of laser therapy under these experimental conditions.     

High intensity focused ultrasound ablation of goat liver in vivo: Pathologic changes of portal vein and the “heat-sink” effect

The purpose of this study was to evaluate pathological changes of the portal vein (PV) and the effects on main branches of the hepatic PV during HIFU (high-intensity focused ultrasound) sonication when liver tissue adjacent to the main branches of hepatic PV was ablated. Normal liver tissue at 0 mm, 5 mm, 10 mm away from the hepatic portal vein in 50 healthy goats was ablated with magnetic resonance image-guided HIFU (MRgHIFU). MRI showed a non-perfusion region at the target area but did not show any significant changes of the PV immediately after HIFU. The histological examination 1 day after HIFU showed coagulative necrosis at the target area, revealed deep-dyed swelling collagen (CS) fibers and vessel wall fracture (VWF) in the PV adjacent to the target area; however, no CS or VWF was observed in the PV 1 week after HIFU ablation. The energy required to ablate the foci at 0 mm was 21% more than that at 10 mm from the PV (p < 0.05); the energy needed to ablate foci 5 mm away from the PV was 10% more than that at 10 mm from the PV (p < 0.05). We concluded that minor injury of the hepatic portal vein may occur when ablating the adjacent liver tissue, and the acoustic energy deposition is related to the distance to the portal vein.     

Compact WDM demultiplexer for seven channels in photonic crystal

We demonstrate a new device concept for wavelength division demultiplexing based on planar photonic crystal waveguides. The filtering of wavelength channels is realized by shifting the cutoff frequency of the fundamental photonic bandgap mode in consecutive sections of the waveguide. The shift is realized by modifying the size of the border holes.The proposed demultiplexer has an area equal to (16.5 μm × 6.5 μm) and thus it is verified that this structure is very small and can be integrated easily into optical integrated circuits with nanophotonic technologies. The output wavelengths of designed structure can be tuned for communication applications, around 1550 nm. The wavelengths of demultiplexer channels are λ₁ = 1.590 μm, λ₂ = 1.566 μm, λ₃ = 1.525 μm, λ₄ = 1.510 μm, λ₅ = 1.484 μm, λ₆ = 1.450 μm, λ₇ = 1.400 μm respectively. Designs offering improvement of number of the separate wavelengths (seven), miniaturization of the structure (107.25 μm²) is our aim in this work.In our structure, we consider that the 2D triangular lattice photonic crystal is composed of air holes surrounded by dielectric. Its parameters are: radius of holes (r = 0.130 μm), lattice constant (a = 0.380 μm), and index of membrane (n = 3.181:InP). The numerical model used to simulate the structure of the demultiplexer is based on the finite difference time domain (FDTD).     

Birefraction of the LiNbO3 crystal in the infrared band

We proposed a spectrum method to determine birefraction of the sample. When the infrared incident light transmits in the birefraction direction of the cube crystal, because of the birefraction of the sample, the transmit spectrum appears interference fringes. The equation Δn = 1/[D(dυ/dm)] shows the relationship between the birefraction and the wave-number, with the interference-number of crystals in the infrared band at room temperature. Via the infrared transmitting along the x-axis of cube lithium niobate crystal, the interference fringes were found. By the fitted polynomial method, the relationship of the birefraction and the wave-number or wavelength of the lithium niobate crystal be educed, which is, Δn = 0.4149 ? 9.00174 × 10^?5υ + 5.64347 × 10^?9υ²,or n = 0.05366 ? 5.20334 × 10^?5λ + 3.99694 × 10^?8λ².     

Radiation stability of M1 − xPrxF2 + x (M = Ca,Sr, Ba) crystals

The radiation stability of the mixed crystals M_1 ? xR_xF_2 + x (M = Ca, Sr, Ba) depends on types of the alkaline-earth and rare-earth ions. Different to Eu- and Ce-containing systems, M_1 ? xPr_xF_2 + x solid solutions have a low radiation resistance, which may be associated with hole trapping on praseodymium ion according to the reaction Pr³⁺ → Pr⁴⁺ which is typical for praseodymium. The coloration efficiency of M_1 ? xPr_xF_2 + x crystals grows in the row Ca → Sr → Ba, which is explained satisfactorily within the model of rare-earth clusters, the structure of which is determined by the ratio of the base alkaline-earth cation to the praseodymium ion radii.     

A novel polarization splitter in ZnTe tellurite glass three-core photonic crystal fiber

A kind of polarization splitter in ZnTe tellurite glass three-core photonic crystal fiber has been proposed. The polarization splitter is based on the phenomenon of resonant tunneling. We use the finite element method and the full-vector beam propagating method to analyze the characteristics of three-core photonic crystal fiber. Compare with the silica glass three-core PCF, the ZnTe tellurite glass three-core PCF have higher extinction ratios and lower coupling loss, the extinction ratios ERA = ? 164.2681 dB and ERC = ? 37.1742 dB at the wavelength λ = 1.55 μm, and the coupling loss is lower than 0.02 dB. The 8.7983-mm-long splitter is proposed to achieve extinction ratio better than ? 20 dB and a bandwidthof 20 nm.     

The effect of chemical pressure in rutheno-cuprates

We have studied the effect of negative chemical pressure in the RuGd_1.5(Ce_0.5?xPr_x)Sr₂Cu₂O_10?δ with Pr content of 0.0 ? x ? 0.2. This is also investigated using the bond length results obtained from the Rietveld refinement analysis. The c parameter and cell volume increase with x for 0.0 ? x ? 0.15. The width of the resistivity transition also increases with Pr concentration, indicating higher inhomogeneity and oxygen deficiency. The difference in the ionic valences of Pr^3+,4+ and Ce⁴⁺ causing different hole doping, the difference in the ionic radii, and oxygen stoichiometry affect the superconducting transition. The magnetoresistance shows a cusp around 135 K which lies between the antiferromagnetic and ferromagnetic transition temperatures, which is probably due to the presence of a spin glass region. There exist two magnetic transition temperatures for 0.0 ? x ? 0.2 which respectively change from T_M = 155 K to 144 K and from T_irr = 115 K to 70 K. The magnetization versus applied magnetic field isotherms at 77 K and 300 K show that the remanent magnetization and coercivity are lower for samples with higher Pr content.     

Microfluidic acoustic trapping force and stiffness measurement using viscous drag effect

It has recently been demonstrated that it was possible to individually trap 70 μm droplets flowing within a 500 μm wide microfluidic channel by a 24 MHz single element piezo-composite focused transducer. In order to further develop this non-invasive approach as a microfluidic particle manipulation tool of high precision, the trapping force needs to be calibrated to a known force, i.e., viscous drag force arising from the fluid flow in the channel. However, few calibration studies based on fluid viscosity have been carried out with focused acoustic beams for moving objects in microfluidic environments.In this paper, the acoustic trapping force (F_trapping) and the trap stiffness (or compliance k) are experimentally determined for a streaming droplet in a microfluidic channel. F_trapping is calibrated to viscous drag force produced from syringe pumps. Chebyshev-windowed chirp coded excitation sequences sweeping the frequency range from 18 MHz to 30 MHz is utilized to drive the transducer, enabling the beam transmission through the channel/fluid interface for interrogating the droplets inside the channel. The minimum force (F_min,trapping) required for initially immobilizing drifting droplets is determined as a function of pulse repetition frequency (PRF), duty factor (DTF), and input voltage amplitude (V_in) to the transducer. At PRF = 0.1 kHz and DTF = 30%, F_min,trapping is increased from 2.2 nN for V_in = 22 V_pp to 3.8 nN for V_in = 54 V_pp. With a fixed V_in = 54 V_pp and DTF = 30%, F_min,trapping can be varied from 3.8 nN at PRF = 0.1 kHz to 6.7 nN at PRF = 0.5 kHz. These findings indicate that both higher driving voltage and more frequent beam transmission yield stronger traps for holding droplets in motion.The stiffness k can be estimated through linear regression by measuring the trapping force (F_trapping) corresponding to the displacement (x) of a droplet from the trap center. By plotting F_trapping – x curves for certain values of V_in (22/38/54 V_pp) at DTF = 10% and PRF = 0.1 kHz, k is measured to be 0.09, 0.14, and 0.20 nN/μm, respectively. With variable PRF from 0.1 to 0.5 kHz at V_in = 54 V_pp, k is increased from 0.20 to 0.42 nN/μm. It is shown that a higher PRF leads to a more compliant trap formation (or a stronger F_trapping) for a given displacement x. Hence the results suggest that this acoustic trapping method has the potential as a noninvasive manipulation tool for individual moving targets in microfluidics by adjusting the transducer’s excitation parameters.     

Synthesis and characterization of layered Li1−x(Ni0.5Co0.5)1−yFeyO2(0 ≤ (1 − x) ≤ 1 and 0 ≤ y ≤ 0.2) cathodes

Layered Li(Ni_0.5Co_0.5)_1−yFe_yO₂ cathodes with 0 ≤ y ≤ 0.2 have been synthesized by firing the coprecipitated hydroxides of the transition metals and lithium hydroxide at 700 °C and characterized as cathode materials for lithium ion batteries to various cutoff charge voltages (up to 4.5 V). While the y = 0.05 sample shows an improvement in capacity, cyclability, and rate capability, those with y = 0.1 and 0.2 exhibit a decline in electrochemical performance compared to the y = 0 sample. Structural characterization of the chemically delithiated Li_1−x(Ni_0.5Co_0.5)_1−yFe_yO₂ samples indicates that the initial O3 structure is maintained down to a lithium content (1 − x) ≈ 0.3. For (1 − x) < 0.3, while a P3 type phase is formed for the y = 0 sample, an O1 type phase is formed for the y = 0.05, 0.1 and 0.2 samples. Monitoring the average oxidation state of the transition metal ions with lithium contents (1 − x) reveals that the system is chemically more stable down to a lower lithium content (1 − x) ≈ 0.3 compared to the Li_1−xCoO₂ system. The improved structural and chemical stabilities appear to lead to better cyclability to higher cutoff charge voltages compared to that found before with the LiCoO₂ system.     

Thermodynamics and kinetics of CO and benzene adsorption on Pt(111) studied with pulsed molecular beams and microcalorimetry

The adsorption and desorption of the system CO/Pt(111) and C₆H₆/Pt(111) at 300 K has been investigated with a pulsed molecular beam method in combination with a microcalorimeter. For benzene the sticking probability has been measured in dependence of the coverage θ. For coverages θ > 0.8 transient adsorption is observed. From an analysis of the time-dependence of the molecular beam pulses the rate constant for desorption is determined to be 5.6 s^? 1. With a precursor-mediated kinetic adsorption model this allows to obtain also the hopping rate constant of 95.5 s^? 1. The measured adsorption enthalpies could be best described by (199 ? 77θ ? 51θ²) kJ/mol, in good agreement with the literature values. For CO on Pt(111) also transient adsorption has been observed for θ > 0.95 at 300 K. The kinetic analysis yields rate constants for desorption and hopping of 20 s^?1 and 51 s^?1, respectively. The heats of adsorption show a linear dependence on coverage (131 ? 38θ) kJ/mol between 0 ≤ θ ≤ 0.3, which is consistent with the desorption data from the literature. For higher coverage (up to θ = 0.9ML) a slope of ?63 kJ/mol describes the decrease of the differential heat of adsorption best. This result is only compatible with desorption experiments, if the pre-exponential factor decreases strongly at higher coverage. We found good agreement with recent quantum chemical calculations made for (θ = 0.5ML).     

Dynamic evolution of Riemann–Silberstein vortices for Gaussian vortex beams

The dynamic evolution of Riemann–Silberstein (RS) vortices for Gaussian vortex beams with topological charges m = ± 1 in free space is studied. It is shown that for Gaussian on-axis vortex beams there exist both RS vortex with m = + 2 and circular edge dislocation. For Gaussian off-axis vortex beams the circular edge dislocation splits into two RS vortices with opposite topological charges m = ± 1 and the RS vortex with m = + 2 decays into two vortices with same topological charges m = + 1. The motion of RS vortices takes place by varying the propagation distance, waist width, off-axis parameter, or topological charge. RS vortices for Gaussian vortex-free beams can be treated as a special case. The results are illustrated analytically and numerically.     

Excess currents larger than the point contact limit in normal-metal/superconducting junctions

In a point contact NS junction, perfect Andreev reflection occurs over a range of voltages equal to the superconducting energy gap, producing an excess current of I_exc =  (4 / 3)(2 eΔ / h). If the superconductor has a finite width, rather than the infinite width of the point contact, one cannot neglect superfluid flow inside the superconducting contact. The energy range available for perfect Andreev reflections then becomes larger than the superconducting gap, since superfluid flow alters the dispersion relation inside the finite width superconductor. We find a maximum excess current of approximately (7 / 3)(2 eΔ / h) when the width of the superconductor is approximately 7 / 3 times the width of the normal metal.     

Optical nutation in a magnetized semiconductor quantum well structure

Using the semiclassical coherent radiation—semiconductor interaction model, optical nutation has been analysed in aGaAs / Al_xGa_1 − xAs quantum well structure (QWS) assumed to be immersed in a moderately strong magnetic field and irradiated by a not-too-strong near band gap resonant femtosecond pulsed Ti–sapphire laser. The finite potential well depth of the QWS and the Wannier–Mott excitonic structure of the crystal absorption edge is taken into account. The excitation intensity is assumed to be below the Mott transition where the various many-body effects have been neglected with adequate reasoning. Numerical analysis made for a GaAs quantum well of thickness  ∼  100 Åand the confining layers ofAl_xGa_1 − xAs withx =  0.3 at intensity I ≤  5  ×  10⁶Wcm ^− 2reveals that the real and imaginary parts of the transient complex-induced polarization are enhanced with an increase in the magnetic field and their ringing behaviour confirms the occurrence of optical nutation in the QWS.     

The value of ESWAN in diagnosis and differential diagnosis of prostate cancer: Preliminary study

ObjectiveTo evaluate the value of enhanced T2 star-weighted angiography (ESWAN) in diagnosis and differential diagnosis of prostate cancer by comparing the multiple indices of ESWAN in benign prostatic hyperplasia (BPH), prostate cancer (PCa) and the normal peripheral zone (PZ).MethodsTraditional MRI and ESWAN were performed on forty-nine clinically-diagnosed PCa patients, sixty BPH patients, and forty-six normal adult males. The ESWAN indices (magnitude value, phase value, R2* value and T2* value) measured on different regions of interest (ROIs) were analyzed. Additionally, receiver operating characteristic (ROC) analysis was performed to obtain the area under the curve (AUC), sensitivity, specificity, and optimal cut-off points of PCa and BPH, PCa and PZ respectively.ResultsThe magnitude value, phase value, R2* value and T2* value of PZ were 1529.43 ± 254.43, 0.0689 ± 0.1619, 16.57 ± 8.11, 82.75 ± 53.87, respectively; the magnitude value, phase value, R2* value, and T2* value of PCa were 1540.18 ± 338.62, − 0.0176 ± 0.0919, 26.93 ± 11.31, and 45.99 ± 17.43, respectively; the magnitude value, phase value, R2* value, and T2* value of BPH were 1579.49 ± 285.28, 0.0209 ± 0.0839, 20.69 ± 3.95, and 51.56 ± 8.90, respectively. Compared with normal PZ, phase value of PCa was lower (t = − 3.302, P = 0.001), R2* value higher (t = 5.326, P = 0.000), and T2* value lower (t = − 4.570, P = 0.000); compared with BPH, phase value of PCa was lower (t = − 2.261, P = 0.026), R2* value higher (t = 3.988, P = 0.000), and T2* value lower (t = − 2.155, P = 0.033). When PCa and PZ were distinguished, the AUC of magnitude value, phase value, R2* value, and T2* value were respectively 0.539 (P = 0.510), 0.679 (P = 0.0007), 0.811 (P < 0.0001), and 0.762 (P < 0.0001); the diagnosis efficiency of R2* value was higher than that of T2* value (P = 0.037), while the diagnosis efficiency of T2* value was equivalent to phase value (P = 0.256). When PCa was differentiated from BPH, the AUC of magnitude value, phase value, R2* value, and T2* value were 0.518 (P = 0.752), 0.612 (P = 0.039), 0.705 (P = 0.0001), and 0.685 (P = 0.0006), respectively; there was no statistical difference in the diagnostic efficiency of phase value, R2* value, and T2* value.ConclusionsThe phase value, R2* value and T2* value can distinguish PCa and normal PZ, PCa and BPH, so they are valuable for the diagnosis and differential diagnosis of PCa, moreover, the diagnostic efficiency of R2* value is better than other indices.     

Metallization of Ge(0 0 1)-p(2 × 1) surface as result of thermal fluctuations

We present a theoretical study of the metallization of Ge(0 0 1)-p(2 × 1) surface which is observed in experimental data. We have considered the connection between thermal fluctuation of this surface structure and its metallic properties. To this end we have performed long-time MD-DFT simulations. The obtained results show that thermal fluctuation of the Ge(0 0 1)-p(2 × 1) structure may cause its metallization which in not necessary connected with a flip-flop motion of dimer atoms. It was shown that the metallization of the Ge(0 0 1)-p(2 × 1) surface takes place when the dimer buckling angle is reduced to around 11°. In the case of our simulations the considered surface system remained in the metallic state for 25% of the simulation time. We have also found that the metallic state of the fluctuating Ge(0 0 1)-p(2 × 1) surface is built up by dangling bonds of the dimer atoms shifted up (D_up) and down (D_down).     

The effect of In/N ratio on the optical quality and lasing threshold in GaxIn1 − xAs1 − yNy/GaAs laser structures

We present a review of published work concerning the effect of In and N compositions on the operation wavelength, optical quality and lasing threshold in Ga_xIn_1 − xAs_1 − yN_y/GaAs QW and double heterostructure lasers. We show that the emission wavelength in the range between 1.0 and 1.4 μ m can be obtained for a wide range of In and/or N concentrations. However, in most Fabry–Perot lasers and vertical cavity surface emitting lasers (VCSELs) reported in the literature, the threshold current density plotted as a function of the relative In/N composition (R =  (1  − x) / y) indicate a broad minima for 40  < R <  70, suggesting an optimum relative composition. We also present the results of our studies concerning the optical quality of Ga_xIn_1 − xAs_1 − yN_y/GaAs single quantum wells for R =  15. We show that the optical quality of GaInAsN can be improved while achieving a red shift in the PL spectra. This is unlike the results obtained by rapid thermal annealing or conventional annealing, which are widely employed as post-growth treatment techniques, where any increase in the PL intensity is almost always accompanied by an undesired blue shift.