Contents of selected B vitamins in NIST SRM 3280 multivitamin/multielement tablets by liquid chromatography isotope dilution mass spectrometry

There is increased interest in accurately assessing the total dietary intake of vitamins from all sources, including foods and dietary supplements. Consequently, a Dietary Supplement Ingredient Database (DSID), based upon analytical values, is being established by USDA with support of the Office of Dietary Supplements (ODS), NIH. The DSID necessitated the development of a new SRM, 3280 — Multivitamin/Multimineral Tablets, by the National Institute of Standards and Technology (NIST), with support from the ODS. As a continuation of a long-term project to develop and validate new methods of determining water-soluble B vitamins in foods and dietary supplements, and as part of a collaborative effort with NIST to characterize SRM 3280, values for the vitamin contents of SRM 3280 have been generated by a liquid chromatographic isotope dilution mass spectrometric (LC/IDMS) method. Isotope-labeled (¹³C and/or ²H) B vitamins (B1-thiamine, B6-pyridoxine, B3-nicotinamide, and B5-pantothenic acid) were obtained from commercial sources, with the support of the ODS/NIH. Our LC/IDMS method uses a C18 reversed phase column, an Agilent 1100 HPLC system, and a Quattro Micro triple-quad mass spectrometer (MS). B vitamin determination was achieved using a gradient LC profile combined with MS/MS detection in multiple reaction monitoring mode. Stock solutions of the isotope-labeled vitamins were calibrated against USP standard solutions. The SRM tablets, with added amounts of the four isotope-labeled B vitamins, were extracted and the vitamins simultaneously determined in a single LC run, in contrast with the single-component determinations performed via IDMS. Unknown vitamin concentrations were calculated by comparing the ratios of the integrated LC peaks at the different masses of the unlabeled and labeled vitamins.     

On-line double isotope dilution laser ablation inductively coupled plasma mass spectrometry for the quantitative analysis of solid materials

We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6–21% for pressed pellets and 3–21% for fused solids were obtained from n = 3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the main advantages of the method over previously reported approaches.     

Accurate analysis of trace earthy-musty odorants in water by headspace solid phase microextraction gas chromatography-mass spectrometry

A simple and sensitive method was developed for the simultaneous separation and determination of trace earthy-musty compounds including geosmin, 2-methylisoborneol, 2-isobutyl-3-methoxypyrazine, 2-isopropyl-3-methoxypyrazine, 2,3,4-trichloroanisole, 2,4,6-trichloroanisole, and 2,3,6-trichloroanisole in water samples. This method combined headspace solid-phase microextraction (HS-SPME) with gas chromatography-mass spectrometry and used naphthalene-d(8) as internal standard. A divinylbenzene/carboxen/polydimethylsiloxane fiber exposing at 90°C for 30 min provided effective sample enrichment in HS-SPME. These compounds were separated by a DB-1701MS capillary column and detected in selected ion monitoring mode within 12 min. The method showed a good linearity from 1 to 100 ng L(-1) and detection limits within (0.25-0.61 ng L(-1)) for all compounds. Using naphthalene-d(8) as the internal standard, the intra-day relative standard deviation (RSD) was within (2.6-3.4%), while the inter-day RSD was (3.5-4.9%). Good recoveries were obtained for tap water (80.5-90.6%), river water (81.5-92.4%), and lake water (83.5-95.2%) spiked at 10 ng L(-1). Compared with other methods using HS-SPME for determination of odor compounds in water samples, this present method had more analytes, better precision, and recovery. This method was successfully applied for analysis of earthy-musty odors in water samples from different sources.     

氨基酸-稳定同位素稀释质谱法用于合成肽段准确含量分析

建立了氨基酸同位素稀释液相色谱-串联质谱法准确测定合成肽段绝对含量的方法。实验中对合成肽段的纯度进行了表征,色谱纯度表征结果为99%以上,质谱纯度为90%以上。在肽段溶液中加入13C标记的氨基酸后进行酸溶液水解时间的优化,水解后的氨基酸直接经液相色谱分离和质谱检测,结果表明肽段中的被测氨基酸在150 ℃、6 mol/L HCl溶液水解4～6 h就可以达到水解平衡。每个肽段选择两个或两个以上的被测氨基酸,测得随机选择的5种合成肽段的绝对含量为62.07%～88.18%,测定结果的相对标准偏差小于8%,相对误差小于5%,均满足定量要求。除常用的被测氨基酸苯丙氨酸、缬氨酸、异亮氨酸外,还考察了选择赖氨酸和精氨酸作为被测氨基酸的可行性,实验结果表明增加精氨酸为被测氨基酸是可行的,从而进一步增加了方法的普适性。该方法的建立避免了色谱法定量时氨基酸衍生化处理带来的副反应影响及操作繁琐等问题,提高了肽段含量测定的准确度和精密度,为肽段含量的准确测定提供了一种新的方法。     

Paradigms in isotope dilution mass spectrometry for elemental speciation analysis

Isotope dilution mass spectrometry currently stands out as the method providing results with unchallenged precision and accuracy in elemental speciation. However, recent history of isotope dilution mass spectrometry has shown that the extent to which this primary ratio measurement method can deliver accurate results is still subject of active research. In this review, we will summarize the fundamental prerequisites behind isotope dilution mass spectrometry and discuss their practical limits of validity and effects on the accuracy of the obtained results. This review is not to be viewed as a critique of isotope dilution; rather its purpose is to highlight the lesser studied aspects that will ensure and elevate current supremacy of the results obtained from this method.     

Serum/plasma methylmercury determination by isotope dilution gas chromatography-inductively coupled plasma mass spectrometry

A method for the determination of methylmercury in plasma and serum samples was developed. The method uses isotope dilution with ¹⁹⁸Hg-labeled methylmercury, extraction into dichloromethane, back-extraction into water, aqueous-phase ethylation, purge and trap collection, thermal desorption, separation by gas chromatography, and mercury isotope specific detection by inductively coupled plasma mass spectrometry. By spiking 2 mL sample with 1.2 ng tracer, measurements in a concentration interval of (0.007–2.9) μg L⁻¹ could be performed with uncertainty amplification factors <2. A limit of quantification of 0.03 μg L⁻¹ was estimated at 10 times the standard deviation of concentrations measured in preparation blanks. Within- and between-run relative standard deviations were <10% at added concentration levels of 0.14 μg L⁻¹, 0.35 μg L⁻¹ and 2.8 μg L⁻¹, with recoveries in the range 82–110%. Application of the method to 50 plasma/serum samples yielded a median (mean; range) concentration of methylmercury of 0.081 (0.091; <0.03–0.19) μg L⁻¹. This is the first time methylmercury has been directly measured in this kind of specimen, and is therefore the first estimate of a reference range.     

Identification of impurities in acarbose by using an integrated liquid chromatography-nuclear magnetic resonance and liquid chromatography-mass spectrometry approach

The usefulness of applying an integrated LC-NMR and LC-MS approach to acarbose bulk drug impurity profiling is demonstrated. LC-MS and LC-NMR methodologies were employed for the online separation and structural elucidation of a final drug product. Combining data provided by the stop-flow LC-NMR and LC-MS experiments made it possible to identify the main components present in the acarbose sample. Spectral analysis revealed that A and B were known impurities while C was an unknown compound. LC-MS and LC-NMR analyses revealed that C was a pentasaccharide differing from the acarbose in number and nature of sugar subunits in the molecule. It was subsequently isolated and its structure was confirmed by the offline 1- and 2-D NMR experiments, and atom assignment was made.     

New mathematical models with associated equations for isotope dilution mass spectrometry (IDMS)

Vector models which progressively lead to a general model for isotope dilution mass spectrometry (IDMS) are presented for the case of two 'monitor isotopes' and one blend involved. They enable one to find the boundary conditions for performing IDMS, and cover the cases of highly enriched isotopes, radioactive isotopes and ratios that are given with different denominator. The models identify the key measurements in their simplest form as well as the conditions which minimise the measurement effort and in some cases the propagated measurement uncertainties. The equations are discussed and compared with other published IDMS equations. Combined with discussion on fundamental aspects of IDMS, this results in an even more 'general' but also more complex IDMS equation.     

Determination of phthalate esters in Chinese spirits using isotope dilution gas chromatography with tandem mass spectrometry

Phthalate esters are additives used in polyvinylchloride and are found as contaminants in many food products. An isotope dilution mass spectrometry technique has been developed for accurate analysis of 16 phthalate esters in Chinese spirits by adopting the 16 corresponding isotope‐labeled phthalate esters. The ethanol in the spirit sample was first removed by heating with a water bath at 100°C with a stream of nitrogen, after which the residue was extracted with n‐hexane twice. The phthalates collected were identified and quantified by gas chromatography with tandem mass spectrometry in multiple reaction monitoring mode. The spiking recoveries of 16 analytes ranged from 94.3 to 105.3% with relative standard deviation values of <6.5%. The detection limits for 16 analytes were <10.0 ng/g. The expanded relative uncertainties were from 3.0 to 14%. A survey was performed on Chinese spirits from the market. Six of the nine analyzed samples were contaminated by phthalates. Di‐n‐butyl phthalate and di‐2‐ethylhexyl phthalate showed higher detection frequency and concentrations. This isotope dilution gas chromatography with tandem mass spectrometry method is simple, rapid, accurate, and highly sensitive, which qualifies as a candidate reference method for the determination of phthalates in spirits.     

同位素稀释液相色谱-串联质谱法准确测定猪肉中的氯霉素

建立了同位素稀释质谱测定猪肉中氯霉素残留的方法,对影响溶剂提取、萃取净化、液相色谱-质谱检测方法准确度的因素进行了量化与优化。猪肉样品经液氮冷冻粉碎,加入氯霉素-D5同位素内标和0.1 mol/L醋酸钠缓冲溶液(pH 5),用乙酸乙酯提取4次,正己烷脱脂,HLB固相萃取小柱净化后采用负离子多反应监测模式下的液相色谱-质谱技术检测。方法的线性范围为0.01～0.5 ng/g,相关系数r2大于0.999;检出限和定量限分别为0.004 ng/g和0.02 ng/g;在0.02 ng/g和1.0 ng/g加标水平的回收率(n=3)分别为95.2%～109.1%和99.7%～102.5%;日内和日间相对标准偏差均小于2%。研究了氯霉素及氯霉素-D5的基体效应,测得不同流动相和稀释溶剂组成时基体效应因子k的范围在0.950～1.015之间。研究结果对同位素稀释质谱痕量残留检测结果准确度的控制、方法的建立与验证具有参考意义。     

Determination of closantel and rafoxanide in animal tissues by online anionic mixed-mode solid-phase extraction followed by isotope dilution liquid chromatography tandem mass spectrometry

A rapid and high-throughput isotope dilution LC-MS/MS method with online sample pre-concentration and clean-up using anionic mixed-mode SPE was described for the determination of closantel and rafoxanide in edible bovine and ovine tissues. Tissue samples were extracted with acetonitrile and acetone mixture (60:40, v/v). Sample pre-concentration, clean-up and analysis were completed simultaneously with the online MAX SPE LC-MS/MS system. Closantel-(13) C(6) and rafoxanide-(13) C(6) were used as the internal standards to improve the precision of the method. The method was validated with edible ovine and bovine tissues (muscle, kidney and liver) fortified at three different levels. The accuracy and RSD were 86-106% and ≤14%, respectively. This high-throughput method was suitable for routine quantitative analysis of closantel and rafoxanide in food safety surveillance samples.     

Quantitative element analysis by isotope dilution in diode laser graphite furnace atomic absorption spectrometry

The paper reviews the application of the isotope dilution technique in optical atomic absorption spectrometry by use of a low-pressure graphite tube furnace as atomizer and diode lasers as radiation sources. The principles and the methodology to obtain accurate quantitative results despite of the occurrence of interferences are presented. The successful application of different Doppler-limited and Doppler-free spectrometric techniques is also presented. The perspectives but also the limitations of this new method are discussed.     

Analysis of urinary biomarkers for exposure to alkyl benzenes by isotope dilution gas chromatography-mass spectrometry

A validated GC-MS method for the analysis of urinary metabolites of alkyl benzenes is reported. Metabolites for exposure to toluene, xylene and ethylbenzene were analyzed simultaneously using stable isotope substituted internal standards. The method entailed acidic deconjugation of urine samples followed by extractive alkylation with pentafluorobenzyl bromide as alkylating agent. The resulting pentafluorobenzyl derivatives of ortho-, meta-, para-cresol, mandelic acid (MA), hippuric acid (HA) and ortho-, meta-, para-methylhippuric acid (MHA) were then quantified by SIM. Optimized reaction conditions for the extractive alkylation step are reported. The derivatives were found to be sufficiently stable for overnight batch analysis. The LODs were below 0.1 micromol/L for the cresols and below 1 micromol/L for MA and the HAs. Within-batch precision for o-MHA was 7%, for m-MHA 5%, for p-MHA 5.2% and below 5% for the rest of the analytes.     

同位素稀释三重串联四级杆质谱法测定鱼组织中24种多环芳烃

采用气相色谱-三重串联四级杆质谱联用技术测定了鱼组织中24种多环芳烃(PAHs).将冻干鱼组织样品加入同位素内标后,用加速溶剂萃取法(ASE)进行提取,提取液采用凝胶排阻色谱(GPC)和固相萃取(SPE)联用进行净化.采用二氯甲烷为提取溶剂,100℃下提取,以二氯甲烷作为GPC的流动相,在3.5 mL/min流速下,收...     

Determination of 19-norandrosterone in CCQM-P68. NIST results using an isotope dilution liquid chromatography/tandem mass spectrometry method

The US National Institute of Standards and Technology (NIST) participated in an international interlaboratory study under the auspices of the Consultative Committee for Amount of Substance (CCQM) for the determination of 19-norandrosterone (19-NA) in urine, the principal metabolite of nandrolone and certain other synthetic testosterone substitutes banned for use by the World Antidoping Agency (WADA). Prior to this study, NIST developed a candidate reference measurement procedure based upon isotope dilution liquid chromatography/tandem mass spectrometry. This method was applied to a urine sample distributed to the participants in the study by the Australian National Measurement Institute, Pymble, Australia (NMIA). The NIST results were in very good agreement with those from the other participants, all of whom used methods based upon gas chromatography/mass spectrometry. All known significant sources of uncertainty were evaluated, resulting in a relative expanded uncertainty of less than 5% (coverage factor k = 2).     

高效液相色谱-质谱联用法测定纺织品中的含氯苯酚

建立了高效液相色谱-质谱联用法检测纺织品中五氯苯酚(PCP)、四氯苯酚(TeCP)。选用ZORBAX XDB-C18柱(50 mm×2.1 mm,3.5μm)为分析柱,流动相为V(甲醇)∶V(纯水)=88∶12,流速为200μL/min;质谱条件选用气动辅助电喷雾离子源(ESI),检测方式为负离子多离子反应检测(MRM);PCP、TeCP标准曲线线性范围均为0.1~100μg/L;回收率为90%~99%;相对标准偏差为3.5%~7.6%(n=5);方法检测低限为5μg/kg。方法适用于纺织品中PCP、TeCP的测定。     

Direct quantification of creatinine in human urine by using isotope dilution extractive electrospray ionization tandem mass spectrometry

Urinary creatinine (CRE) is an important biomarker of renal function. Fast and accurate quantification of CRE in human urine is required by clinical research. By using isotope dilution extractive electrospray ionization tandem mass spectrometry (EESI–MS/MS) a high throughput method for direct and accurate quantification of urinary CRE was developed in this study. Under optimized conditions, the method detection limit was lower than 50 μg L⁻¹. Over the concentration range investigated (0.05–10 mg L⁻¹), the calibration curve was obtained with satisfactory linearity (R² = 0.9861), and the relative standard deviation (RSD) values for CRE and isotope-labeled CRE (CRE-d3) were 7.1–11.8% (n = 6) and 4.1–11.3% (n = 6), respectively. The isotope dilution EESI–MS/MS method was validated by analyzing six human urine samples, and the results were comparable with the conventional spectrophotometric method (based on the Jaffe reaction). Recoveries for individual urine samples were 85–111% and less than 0.3 min was taken for each measurement, indicating that the present isotope dilution EESI–MS/MS method is a promising strategy for the fast and accurate quantification of urinary CRE in clinical laboratories.     

Development of melamine certified reference material in milk using two different isotope dilution mass spectrometry techniques

A new certified reference material (CRM) of melamine in milk GLHK-11-02 was developed aiming to address the great demand from the testing community after the melamine crises. The material was prepared by adding an appropriate quantity of melamine into the skimmed milk samples and the final product was in the form of fine lyophilized powder. Characterization of the material relied on two newly developed gravimetric isotope dilution mass spectrometry (IDMS) methods, one using liquid chromatography-tandem mass spectrometry (LC-MS/MS) and another gas chromatography-mass spectrometry (GC-MS). Experimental parameters with crucial effects on the performance of the two IDMS methods were thoroughly investigated. These included purity of standard used, equilibration time of isotopes, efficiency of extraction methods as well as possible interferences from the matrix and melamine analogues. Precision was found to be excellent with a coefficient of variation of 2.5% for the LC-IDMS/MS (n=46) and 1.9% for the GC-IDMS (n=30) respectively. Using one-tail Student's t-test at 95% confidence interval, analytical data sets generated from the two methods were found to exhibit no significant difference. Measurement accuracy of the methods was further verified through an Asia Pacific Metrology Program (APMP) pilot study. Analytical results of the present LC-IDMS/MS for the two milk test samples at the concentration level of about 0.45 and 3.5 mg kg(-1) were proven to be very good. There were excellent overlaps between our results and the assigned reference values, and the absolute deviation was less than 3.2%. Both the LC-IDMS/MS and GC-IDMS methods were shown to be sufficiently reliable and accurate for certification of the melamine CRM. Certified value of melamine in dry mass fraction in GLHK-11-02 was 1.14 mg kg(-1). Expanded uncertainty due to sample inhomogeneity, long term and short term stability and variability in the characterization procedure was at 7.1% or 0.08 mg kg(-1). The CRM is primarily used to provide a complete method validation for and to improve the technical competence of melamine analysis to food and chemical testing laboratories.     

Evaluation of online carbon isotope dilution mass spectrometry for the purity assessment of synthetic peptide standards

We present a novel method for the purity assessment of peptide standards which is applicable to any water soluble peptide. The method is based on the online ¹³C isotope dilution approach in which the peptide is separated from its related impurities by liquid chromatography (LC) and the eluent is mixed post-column with a continuous flow of ¹³C-enriched sodium bicarbonate. An online oxidation step using sodium persulfate in acidic media at 99 °C provides quantitative oxidation to ¹²CO₂ and ¹³CO₂ respectively which is extracted to a gaseous phase with the help of a gas permeable membrane. The measurement of the isotope ratio 44/45 in the mass spectrometer allows the construction of the mass flow chromatogram. As the only species that is finally measured in the mass spectrometer is CO₂, the peptide content in the standard can be quantified, on the base of its carbon content, using a generic primary standard such as potassium hydrogen phthalate. The approach was validated by the analysis of a reference material (NIST 8327), and applied to the quantification of two commercial synthetic peptide standards. In that case, the results obtained were compared with those obtained using alternative methods, such as amino acid analysis and ICP-MS. The results obtained proved the value of the method for the fast, accurate and precise mass purity assignment of synthetic peptide standards.     

Determination of B in body fluids by isotope dilution inductively coupled mass spectrometry with direct injection nebulization

The determination of B in small volumes of undigested blood plasma and urine by isotope dilution and high efficiency direct injection nebulization (DIN) inductively coupled plasma mass spectrometry (ICP-MS) is proposed. The C interference over ¹¹B was removed by precipitating the samples proteins. Samples aliquots of 1 ml were spiked with an enriched ¹⁰B solution and shaken during 1 h to attain the isotopic equilibrium. Thereafter, the sample proteins were denaturated with nitric acid and the supernatant was analyzed. This procedure was effective to reduce C concentrations in approximately 94%. Sample volumes of 50 μl were introduced into the ICP by the direct injection nebulizer producing transient signals lasting 30 s for B isotopes measurements. Precision of ¹⁰B/¹¹B measurements was characterized by relative standard deviation (RSD) lower than 1%. The instrumental mass discrimination factor was lower than 5%. Total B concentrations from 100 to 135 μg L⁻¹ in plasma and 0.499 to 3.021 mg L⁻¹ in urine samples were found. Reproducibility of triplicate samples was characterized by RSD<2.0% for plasma and lower than 1.3% for urine samples. Limit of detection (3σ) of 0.6 ng ml⁻¹ was calculated from synthetic blood plasma blank. Results of the denatured supernatant and digested plasma and urine samples were comparable at the 95% confidence level.