首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
2.
3.
4.
5.
NMR spectra of a series of N‐arylsuccinanilic acids, N‐arylsuccinimides, N‐arylmaleanilic acids, and N‐arylmaleimides were examined to estimate the electronic effect of the amide and imide groups on the chemical shifts of the hydrogen and carbon nuclei of the benzene ring. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

6.
The copolymerization of N‐isopropylacrylamide (NIPAM) and Ntert‐butylacrylamide (TBAM) via conventional radical polymerization and nitroxide‐mediated polymerization (NMP) with Ntert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)]nitroxide (SG1) was investigated. The monomer reactivity ratios were determined to be 0.58 and 1.00 for NIPAM and TBAM, respectively. The reactivities were approximately the same at 120 and 60 °C in N,N‐dimethylformamide (DMF) and toluene, respectively, for the conventional copolymerizations and in DMF at 120 °C for NMP. Controlled/living characteristics for NMP were achieved with a 2,2′‐azobisisobutyronitrile/SG1 bimolecular system and a unimolecular polystyrene [poly(STY)]–SG1 macroinitiator in the presence of excess free SG1. Block copolymers of poly(N‐isopropylacrylamide‐statNtert‐butylacrylamide) [poly(NIPAM‐stat‐TBAM)] with styrene {poly(N‐isopropylacrylamide‐statNtert‐butylacrylamide)‐block‐polystyrene [poly(NIPAM‐stat‐TBAM)‐block‐poly(STY)]} were obtained by chain extension of either poly(NIPAM‐stat‐TBAM)–SG1 with styrene or poly(STY)–SG1 with NIPAM/TBAM. A comparison of the number‐average molecular weight calculated from the end‐group content with the number‐average molecular weight measured by gel permeation chromatography for poly(NIPAM‐stat‐TBAM)‐block‐poly(STY)–SG1 indicated that nearly all poly(NIPAM‐stat‐TBAM) chains were capped by SG1 and were thus living. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6410–6418, 2006  相似文献   

7.
Thermal reactions of N‐benzylidene‐ and N‐(2‐pyridylmethylidene)‐tert‐butylamines ( 5 and 13 ) under FVT conditions have been investigated. Unexpectedly, at 800 °C, compound 5 yields 1,2‐dimethylindole and 3‐methylisoquinoline. In the reaction of 13 at 800 °C, 3‐methylimidazo[1,5‐a]pyridine was obtained as the major product. Mechanisms of these reactions have been proposed on the basis of DFT calculations. Furthermore, UV‐photoelectron spectroscopy combined with FVT has been applied for direct monitoring and characterization of the thermolysis products in situ.  相似文献   

8.
9.
The crystal structure of the title compound, alternatively called 3‐[4‐(benzyl­oxy)­phenyl]‐2‐(Ntert‐butoxy­car­bonyl‐N‐methyl­amino)­propi­onic acid, C22H27NO5, has been studied in order to ex­amine the role of N‐methyl­ation as a determinant of peptide conformation. The conformation of the tert‐butoxy­carbonyl group is transtrans. The side chain has a folded conformation and the two phenyl rings are effectively perpendicular to one another. The carboxyl­ate hydroxyl group and the urethane carbonyl group form a strong intermolecular O—H?O hydrogen bond.  相似文献   

10.
11.
12.
β‐Amino acids are key structural elements in unnatural peptides, peptidomimetics, and many other physiologically active compounds. In view of their importance, we have developed an efficient synthetic route that provides highly enantiomerically enriched (R)‐ and (S)‐H‐β2‐htLeu‐OH via highly diastereo‐ and regioselective addition of tert‐butyl radical to enantiomerically pure N‐fumaroyloxazolidinones, followed by removal of the chiral auxiliary, Curtius rearrangement, ester hydrolysis, and catalytic hydrogenolysis.  相似文献   

13.
The investigation concerns the effect of a bulky substituent at the pyrrole nitrogen atom on the orientation and regioselectivity of pyrrole phosphorylation with phosphorus(III) halides. As shown, phosphorylation of N‐iso‐propylpyrrole with phosphorus tribromide or trichloride proceeds nonregioselectively at positions 2 and 3 but it is followed by the 2 → 3 migration of the dihalogenophosphine group which quantitatively yields the 3‐isomer. N‐tert‐butylpyrrole is regioselectively phosphorylated with halogenophosphines at position 3. The tert‐butyl substituent at the nitrogen atom does not preclude the binding of even two or three pyrrolyl residues to the phosphorus atom. The key compounds, 3‐pyrrolyldihalogenophosphines, were isolated in a pure state, characterized and used to obtain a number of stable phosphorus(V) derivatives. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:599–604, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20158  相似文献   

14.
A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm2/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009  相似文献   

15.
16.
17.
18.
19.
20.
Indoles are ubiquitous structures that are found in natural products and biologically active molecules. The synthesis of indoles and indole‐involved synthetic methodologies in organic chemistry have been receiving considerable attention. Indole‐N‐carboxylic acids and derived indole‐N‐carboxamides are intriguing compounds, which have been widely used in organic synthesis, especially in multicomponent reactions and C?H functionalization of indoles. This Minireview summarizes the advances of reactions involving indole‐N‐carboxylic acids and indole‐N‐carboxamides in organic chemistry, and discusses the synthetic potential and perspective of this field.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号