A spectroscopic investigation of carbon-carbon bond formation by methylene insertion on a Ag(111) surface: mechanism and kinetics

Using reflection-absorption infrared spectroscopy (RAIRS) and temperature-programmed reaction spectroscopy (TPRS), we have investigated the cross-coupling reaction between CH(2)(a) and CF(3)(a) on a Ag(111) surface. CH(2)(a) and CF(3)(a) are generated by thermal decomposition of adsorbed CH(2)I(2) and CF(3)I. RAIRS results unambiguously demonstrate that CH(2)(a) inserts into the Ag-CF(3) bond to produce adsorbed CF(3)CH(2)(a), which upon heating selectively undergoes beta-fluorine elimination to form CH(2)=CF(2). Increasing the CH(2)(a) and CF(3)(a) coverage leads to the sequential insertion of CH(2)(a) into Ag-CF(3), as evidenced by CH(2)CH(2)CF(3)(a) formation detected with RAIRS. Prior to the insertion reaction, the evidence favors islanding of fragments. The methylene insertion reaction is so facile that it occurs at cryogenic temperatures (120 K). Time-resolved RAIRS (TR-RAIRS) results at selected temperatures reveal an activation energy of 5.8 kJ/mol. Our results provide, for the first time, direct spectroscopic information about the mechanism and kinetics of the methylene insertion reaction.     

Coupling versus surface-etching reactions of alkyl halides on GaAs(100): I. CF3CH2I reactions

We report the rich surface chemistry exhibited by the reactions of 1,1,1-trifluoroethyl iodide (CF3CH2I) adsorbed onto gallium-rich GaAs(100)-(4 x 1), studied by temperature-programmed desorption (TPD) and low-energy electron diffraction (LEED) studies and X-ray photoelectron spectroscopy (XPS). CF3CH2I adsorbs molecularly at 150 K but dissociates, below room temperature, to form a chemisorbed monolayer of CF3CH2 and I species. Recombinative desorption of molecular CF3CH2I competes with the further reactions of the CF3CH2 and I chemisorbed species. The CF3CH2 species can either undergo beta-fluoride elimination to yield gaseous CF2=CH2 or it can undergo self-coupling to form the corresponding higher alkane, CF3CH2CH2CF3. A second coupling product, CF3CH2CH=CF2, is also evolved, and it is postulated that migratory insertion of the liberated CF2=CH2 into the surface-carbon bond of the chemisorbed CF3CH2 is responsible for its formation. The iodines, formed by C-I scission in the chemisorbed CF3CH2I, and the fluorines, derived from beta-fluoride elimination in CF3CH2, react with the surface gallium dimers, and Ga-As back-bonds to generate five etch products (GaF, AsF, GaI, AsI, and As2) that desorb in the temperature range of 420 to >600 K. XPS data reveal that the surface stoichiometry remains constant throughout the entire annealing temperature range because of the desorption of both gallium- and arsenic-containing etch products, which occur sequentially. In this article, plausible mechanisms by which all products form and the binding sites of these reactions in the (4 x 1) reconstruction are discussed. Factors that control the rate constants of etch product versus hydrocarbon product formation and in particular how they impact on the respective desorption temperatures will be discussed.     

Methyl Tin(IV) derivatives of HOTeF(5) and HN(SO(2)CF(3))(2): a solution multinuclear NMR study and the X-ray crystal structures of (CH(3))(2)SnCl(OTeF(5)) and [(CH(3))(3)Sn(H(2)O)(2)][N(SO(2)CF(3))(2)

The new tin(IV) species (CH(3))(2)SnCl(OTeF(5)) was prepared via either the solvolysis of (CH(3))(3)SnCl in HOTeF(5) or the reaction of (CH(3))(3)SnCl with ClOTeF(5). It was characterized by NMR and vibrational spectroscopy, mass spectrometry, and single crystal X-ray diffraction. (CH(3))(2)SnCl(OTeF(5)) crystallizes in the monoclinic space group P2(1)/n (a = 5.8204(8) A, b =10.782(1) A, c =15.493(2) A, beta = 91.958(2) degrees, V = 971.7(2) A(3), Z = 4). NMR spectroscopy of (CH(3))(3)SnX, prepared from excess Sn(CH(3))(4) and HX (X = OTeF(5) or N(SO(2)CF(3))(2)), revealed a tetracoordinate tin environment using (CH(3))(3)SnX as a neat liquid or in dichloromethane-d(2) (CD(2)Cl(2)) solutions. In acetone-d(6) and acetonitrile-d(3) (CD(3)CN) solutions, the tin atom in (CH(3))(3)SnOTeF(5) was found to extend its coordination number to five by adding one solvent molecule. In the strong donor solvent DMSO, the Sn-OTeF(5) bond is broken and the (CH(3))(3)Sn(O=S(CH(3))(2))(2)(+) cation and the OTeF(5)(-) anion are formed. (CH(3))(3)SnOTeF(5) and (CH(3))(3)SnN(SO(2)CF(3))(2) react differently with water. While the Te-F bonds in the OTeF(5) group of (CH(3))(3)SnOTeF(5) undergo complete hydrolysis that results in the formation of [(CH(3))(3)Sn(H(2)O)(2)](2)SiF(6), (CH(3))(3)SnN(SO(2)CF(3))(2) forms the stable hydrate salt [(CH(3))(3)Sn(H(2)O)(2)][N(SO(2)CF(3))(2)]. This salt crystallizes in the monoclinic space group P2(1)/c (a = 7.3072(1) A, b =13.4649(2) A, c =16.821(2) A, beta = 98.705(1) degrees, V = 1636.00(3) A(3), Z = 4) and was also characterized by NMR and vibrational spectroscopy.     

Hydride transfer reactivity of tetrakis(trimethylphosphine)(hydrido)(nitrosyl)molybdenum(0)

The tetrakis(trimethylphosphine) molybdenum nitrosyl hydrido complex trans-Mo(PMe(3))(4)(H)(NO) (2) and the related deuteride complex trans-Mo(PMe(3))(4)(D)(NO) (2a) were prepared from trans-Mo(PMe(3))(4)(Cl)(NO) (1). From (2)H T(1 min) measurements and solid-state (2)H NMR the bond ionicities of 2a could be determined and were found to be 80.0% and 75.3%, respectively, indicating a very polar Mo--D bond. The enhanced hydridicity of 2 is reflected in its very high propensity to undergo hydride transfer reactions. 2 was thus reacted with acetone, acetophenone, and benzophenone to afford the corresponding alkoxide complexes trans-Mo(NO)(PMe(3))(4)(OCHR'R') (R' = R' = Me (3); R' = Me, R' = Ph (4); R' = R' = Ph (5)). The reaction of 2 with CO(2) led to the formation of the formato-O-complex Mo(NO)(OCHO)(PMe(3))(4) (6). The reaction of with HOSO(2)CF(3) produced the anion coordinated complex Mo(NO)(PMe(3))(4)(OSO(2)CF(3)) (7), and the reaction with [H(Et(2)O)(2)][BAr(F)(4)] with an excess of PMe(3) produced the pentakis(trimethylphosphine) coordinated compound [Mo(NO)(PMe(3))(5)][BAr(F)(4)] (8). Imine insertions into the Mo-H bond of 2 were also accomplished. PhCH[double bond, length as m-dash]NPh (N-benzylideneaniline) and C(10)H(7)CH=NPh (N-1-naphthylideneaniline) afforded the amido compounds Mo(NO)(PMe(3))(4)[NR'(CH(2)R')] (R' = R' = Ph (9), R' = Ph, R' = naphthyl (11)). 9 could not be obtained in pure form, however, its structure was assigned by spectroscopic means. At room temperature 11 reacted further to lose one PMe(3) forming 12 (Mo(NO)PMe(3))(3)[N(Ph)CH(2)C(10)H(6))]) with agostic stabilization. In a subsequent step oxidative addition of the agostic naphthyl C-H bond to the molybdenum centre occurred. Then hydrogen migration took place giving the chelate amine complex Mo(NO)(PMe(3))(3)[NH(Ph)(CH(2)C(10)H(6))] (15). The insertion reaction of 2 with C(10)H(7)N=CHPh led to formation of the agostic compound Mo(NO)(PMe(3))(3)[N(CH(2)Ph)(C(10)H(7))] (10). Based on the knowledge of facile formation of agostic compounds the catalytic hydrogenation of C(10)H(7)N=CHPh and PhN=CHC(10)H(7) with 2 (5 mol%) was tested. The best conversion rates were obtained in the presence of an excess of PMe(3), which were 18.4% and 100% for C(10)H(7)N=CHPh and PhN=CHC(10)H(7), respectively.     

A tungstenVI nitride having a W2(mu-N)2 core

The tungsten nitrido species, [W(mu-N)(CH2-t-Bu)(OAr)2]2 (Ar = 2,6-diisopropylphenyl), has been prepared in a reaction between the alkylidyne species, W(C-t-Bu)(CH2-t-Bu)(OAr)2, and organonitriles. The dimeric nature of the nitride was established in the solid state through an X-ray study and in solution through a combination of 15N NMR spectroscopy and vibrational spectroscopy. Reaction of the nitride with trimethylsilyl trifluoromethanesulfonate afforded the monomeric trimethylsilyl imido species, W(NSiMe3)(CH2-t-Bu)(OAr)2(OSO2CF3), which was also characterized crystallographically. The W2N2 core can be reduced by one electron electrochemically or in bulk with metallocenes to afford the radical anion, {n-Bu4N}{[W(mu-N)(CH2-t-Bu)(OAr)2]2}. Density functional theory calculations suggest that the lowest-energy allowable transition in [W(mu-N)(CH2-t-Bu)(OAr)2]2 is from a highest occupied molecular orbital consisting largely of ligand-based lone pairs into what is largely a metal-based lowest unoccupied molecular orbital.     

Trifluoromethanesulfenyl acetate, CF3S-OC(O)CH3, and trifluoromethanesulfenyl trifluoroacetate, CF3S-OC(O)CF3: unexpected conformational properties

Structural and conformational properties of two sulfenyl derivatives, trifluoromethanesulfenyl acetate, CF3S-OC(O)CH3 (1), and trifluoromethanesulfenyl trifluoroacetate, CF3S-OC(O)CF3 (2), were determined by gas electron diffraction, vibrational spectroscopy, in particular with IR (matrix) spectroscopy, which includes photochemical studies, and by quantum chemical calculations. Both compounds exist in the gas phase as a mixture of two conformers, with the prevailing component possessing a gauche structure around the S-O bond. The minor form, 15(5)% in 1 and 11(5)% in 2 according to IR(matrix) spectra, possesses an unexpected trans structure around the S-O bond. The C=O bond of the acetyl group is oriented syn with respect to the S-O bond in both conformers. UV-visible broad band irradiation of 1 and 2 isolated in inert gas matrixes causes various changes to occur. Conformational randomization clearly takes place in 2 with simultaneous formation of CF3SCF3. For 1 the only reaction channel detected leads to the formation of CH3SCF3 with the consequent extrusion of CO2. Quantum chemical calculations (B3LYP/6-31G and MP2 with 6-31G and 6-311G(2df,pd) basis sets) confirm the existence of a stable trans conformer. The calculations reproduce the conformational properties for both compounds qualitatively correct with the exception of the B3LYP method for compound 2 which predicts the trans form to be prevailing, in contrast to the experiment.     

Stabilization of the P(CF(3))(2)(-) ion as a reversible CS(2) adduct, [P(CF(3))(2)CS(2)](-), and its potential use as a nucleophilic P(CF(3))(2)(-) source: synthesis and structure of [18-crown-6-K][P(C(6)F(5))(2)CS(2)

The bis(trifluoromethyl)phosphanide ion, P(CF(3))(2)(-), decomposes slowly above -30 degrees C in CH(2)Cl(2) and THF solution. An increase of the thermal stability of the P(CF(3))(2)(-) moiety is observed if excess CS(2) is added. The P(CF(3))(2)(-) moiety is stabilized because of the formation of the bis(trifluoromethyl)phosphanodithioformate anion. Solutions of a [P(CF(3))(2)CS(2)](-) salt still act as a source of P(CF(3))(2)(-), even in the presence of excess of CS(2). The stable compound [18-crown-6-K][P(CF(3))(2)CS(2)] was characterized by multinuclear NMR spectroscopy, elemental analysis, and vibrational spectroscopy in combination with quantum chemical calculations. The thermally unstable P(C(6)F(5))(2)(-) ion decomposes even at -78 degrees C in solution giving polymeric material. The intermediate formation of the bis(pentafluorophenyl)phosphanide anion in the presence of excess of CS(2) allows the isolation of [18-crown-6-K][P(C(6)F(5))(2)CS(2)]. The novel compound crystallizes with one solvent molecule CH(2)Cl(2) in the monoclinic space group P2(1)/n with a = 1151.8(1) pm, b = 1498.1(2) pm, c = 2018.2(2) pm, beta = 102.58(1) degrees, and Z = 4. Optimized geometric parameters of the [P(C(6)F(5))(2)CS(2)](-) ion at the B3PW91/6-311G(d) level of theory are in excellent agreement with the experimental values.     

Substitution reactions of [Ru(dppe)(CO)(H(2)O)(3)][OTf](2)

The labile nature of the coordinated water ligands in the organometallic aqua complex [Ru(dppe)(CO)(H(2)O)(3)][OTf](2) (1) (dppe = Ph(2)PCH(2)CH(2)PPh(2); OTf = OSO(2)CF(3)) has been investigated through substitution reactions with a range of incoming ligands. Dissolution of 1 in acetonitrile or dimethyl sulfoxide results in the facile displacement of all three waters to give [Ru(dppe)(CO)(CH(3)CN)(3)][OTf](2) (2) and [Ru(dppe)(CO)(DMSO)(3)][OTf](2) (3), respectively. Similarly, 1 reacts with Me(3)CNC to afford [Ru(dppe)(CO)(CNCMe(3))(3)][OTf](2) (4). Addition of 1 equiv of 2,2'-bipyridyl (bpy) or 4,4'-dimethyl-2,2'-bipyridyl (Me(2)bpy) to acetone/water solutions of 1 initially yields [Ru(dppe)(CO)(H(2)O)(bpy)][OTf](2) (5a) and [Ru(dppe)(CO)(H(2)O)(Me(2)bpy)][OTf](2) (6a), in which the coordinated water lies trans to CO. Compounds 5a and 6a rapidly rearrange to isomeric species (5b, 6b) in which the ligated water is trans to dppe. Further reactivity has been demonstrated for 6b, which, upon dissolution in CDCl(3), loses water and coordinates a triflate anion to afford [Ru(dppe)(CO)(OTf)(Me(2)bpy)][OTf] (7). Reaction of 1 with CH(3)CH(2)CH(2)SH gives the dinuclear bridging thiolate complex [[(dppe)Ru(CO)](2)(mu-SCH(2)CH(2)CH(3))(3)][OTf] (8). The reaction of 1 with CO in acetone/water is slow and yields the cationic hydride complex [Ru(dppe)(CO)(3)H][OTf] (9) via a water gas shift reaction. Moreover, the same mechanism can also be used to account for the previously reported synthesis of 1 upon reaction of Ru(dppe)(CO)(2)(OTf)(2) with water (Organometallics 1999, 18, 4068).     

Oxidative addition of phosphine-tethered thiols to iron carbonyl: binuclear phosphinothiolate complexes, (mu-SCH(2)CH(2)PPh(2))(2)Fe(2)(CO)(4), and hydride derivatives

The mononuclear complex Fe(CO)(4)(PPh(2)CH(2)CH(2)SH), 1, is isolated as an intermediate in the overall reaction of PPh(2)CH(2)CH(2)SH with [Fe(0)(CO)(4)] sources to produce binuclear bridging thiolate complexes. Photolysis is required for loss of CO and subsequent S-H activation to generate the metal-metal bonded Fe(I)-Fe(I) complex, (mu-SCH(2)CH(2)PPh(2))(2)Fe(2)(CO)(4), 2. Isomeric forms of 2 derive from the apical or basal position of the P-donor ligand in the pseudo square pyramidal S(2)Fe(CO)(2)P coordination spheres. This position in turn is dictated by the stereochemistry of the mu-S-CH(2) bond, designated as syn or anti with respect to the Fe(2)S(2) butterfly core. Addition of strong acids engages the Fe(I)-Fe(I) bond density as a bridging hydride, [(mu-H)-anti-2](+)[SO(3)CF(3)](-) or [(mu-H)-syn-2](+)[SO(3)CF(3)](-), with formal oxidation to Fe(II)-H-Fe(II). Molecular structures of anti-2, syn-2, and [(mu-H)-anti-2](+)[SO(3)CF(3)](-) were determined by X-ray crystallography and show insignificant differences in distance and angle metric parameters, including the Fe-Fe bond distances which average 2.6 A. The lack of coordination sphere rearrangements is consistent with the ease with which deprotonation occurs, even with the weak base, chloride. The Fe(I)-Fe(I) bond, supported by bridging thiolates, therefore presents a site where a proton might be taken up and stored as a hydride without impacting the overall structure of the binuclear complex.     

C-D(0) (D(0) = pi-donor, F) Cleavage in H(2)C=CH(D(0)) by (Cp(2)ZrHCl)(n): mechanism, agostic fluorines, and a carbene of Zr(IV).

Consistent with the C-O cleavage behavior of vinyl ethers, vinyl fluoride reacts with Cp(2)ZrHCl to give Cp(2)ZrFCl and C(2)H(4) as primary products. DFT (B3PW91) calculations show this reaction to be highly exoenergetic (-55 kcal/mol), and reveal a sigma-bond metathesis mechanism to be unfavorable compared to a Zr-H addition across the C=C bond, with regiochemistry placing F on C(beta) of the resulting fluoroethyl ligand. beta-F elimination (onto Zr) then completes the reaction. There is no eta(2)-olefin intermediate on the reaction path. DFT calculations seeking the energy and structure of the two carbenes Cp(2)ZrHCl[CF(CH(3))] and Cp(2)ZrFCl[CH(CH(3))] are also described.     

Cd(2+) Complexation with P(CH(2)OH)(3), OP(CH(2)OH)(3), and (HOCH(2))(2)PO(2)(-): Coordination in Solution and Coordination Polymers

The coordination of Cd(2+) with P(CH(2)OH)(3) (THP) in methanol was followed by (31)P and (111)Cd NMR techniques. A cadmium-to-phosphine coordination ratio of 1:3 has been established, and effective kinetic parameters have been calculated. Air oxidation of THP in the presence of CdCl(2) at room temperature produces coordination polymer (3)(∞)[Cd(3)Cl(6)(OP(CH(2)OH)(3))(2)] (1). The same oxidation reaction at 70 °C gives another coordination polymer, (∞)[CdCl(2)(OP(CH(2)OH)(3))] (2). Complexes 1 and 2 are the first structurally characterized complexes featuring OP(CH(2)OH)(3) as a ligand that acts as a linker between Cd atoms. The addition of NaBPh(4) to the reaction mixture gives coordination polymer (∞)[Na(2)CdCl(2)(O(2)P(CH(2)OH)(2))(2)(H(2)O)(3)] (3) with (HOCH(2))(2)PO(2)(-) as the ligand. Coordination polymers 1-3 have been characterized by X-ray analysis, elemental analysis, and IR spectroscopy.     

Electronic structure of iron chlorins: characterization of bis(l-valine methyl ester)(meso-tetraphenylchlorin)iron(III)triflate and bis(l-valine methyl ester)(meso-tetraphenylchlorin)iron(II)

The synthesis and characterization of the two iron chlorin complexes [Fe(III)(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) and Fe(II)(TPC)[(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2))](2) (2) are reported. The crystal structure of complex 1 has been determined. The X-ray structure shows that the porphyrinate rings are weakly distorted. The metal-nitrogen distances to the reduced pyrrole N(4), 2.034(4) A, and to the pyrrole trans to it N(2), 2.012(4) A, are longer than the distances to the two remaining nitrogens [N(1), 1.996(4) A, and N(3), 1.984(4) A], leading to a core-hole expansion of the macrocycle due to the reduced pyrrole. The (1)H NMR isotropic shifts at 20 degrees C of the different pyrrole protons of 1 varied from -0.8 to -48.3 ppm according to bis-ligated complexes of low-spin ferric chlorins. The EPR spectrum of [Fe(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) in solution is rhombic and gives the principal g values g(1) = 2.70, g(2) = 2.33, and g(3) = 1.61 (Sigmag(2) = 15.3). These spectroscopic observations are indicative of a metal-based electron in the d(pi) orbital for the [Fe(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) complex with a (d(xy))(2)(d(xz)d(yz))(3) ground state at any temperature. The X-ray structure of the ferrous complex 2 also shows that the porphyrinate rings are weakly distorted. The metal-nitrogen distances to the reduced pyrrole N(4), 1.991(5) A, and to the pyrrole trans to it N(2), 2.005(6) A, are slightly different from the distances to the two remaining nitrogens [N(1), 1.988(5) A, and N(3), 2.015(5) A], leading to a core-hole expansion of the macrocycle due to the reduced pyrrole.     

Small scorpionate ligands: silver(I)-organophosphane complexes of 5-CF(3)-substituted scorpionate ligand combining a B-H...Ag coordination motif

The first 5-substituted trihydro(azolyl)borate system, the sodium trihydro(5-CF3-pyrazol-1-yl)borate, Na[H3B(5-(CF3)pz)], has been synthesized by the reaction of 3-trifuoromethyl-pyrazole with NaBH4 in high yield. Na[H3B(5-(CF3)pz)] reacts with AgNO3 in the presence of monodentate tertiary phosphanes PR3 (PR3=P(C6H5)3, P(p-C6H4CH3)3, P(m-C6H4CH3)3, P(o-C6H4CH3)3, or PCH3(C6H5)2) to afford silver(I) bis(phosphane) adducts. These compounds have been characterized by elemental analyses, FTIR, ESI-MS, and multinuclear (1H, 19F, and 31P) NMR spectroscopy. Solid-state structures of {[H3B(5-(CF3)pz)]Ag[P(C6H5)3]2} and {[H3B(5-(CF3)pz)]Ag[P(p-C6H4CH3)3]2} are also reported. They feature kappa2-N,H-bonded trihydro(pyrazolyl)borate ligands and pseudo-tetrahedral silver atoms.     

Sensitivity of silver(I) complexes of a pyrimidine-hydrazone ligand to solvent, counteranion, and metal-to-ligand ratio changes

Metal complexation studies were performed with AgSO(3)CF(3) and AgBF(4) and the ditopic pyrimidine-hydrazone ligand 6-(hydroxymethyl)pyridine-2-carboxaldehyde (2-methylpyrimidine-4,6-diyl)bis(1-methylhydrazone) (1) in both CH(3)CN and CH(3)NO(2) in a variety of metal-to-ligand ratios. The resulting complexes were studied in solution by NMR spectroscopy and in the solid state by X-ray crystallography. Reacting either AgSO(3)CF(3) or AgBF(4) with 1 in either CH(3)CN or CH(3)NO(2) in a 1:1 metal-to-ligand ratio produced a double helicate in solution. This double helicate could be converted into a linear complex by increasing the metal-to-ligand ratio; however, the degree of conversion depended on the solvent and counteranion used. Attempts to crystallize the linear AgSO(3)CF(3) complex resulted in crystals with the dimeric structure [Ag(2)1(CH(3)CN)(2)](2)(SO(3)CF(3))(4) (2), while attempts to crystallize the AgSO(3)CF(3) double helicate from CH(3)CN resulted in crystals of another dimeric complex, [Ag(2)1(SO(3)CF(3))(CH(3)CN)(2)](2)(SO(3)CF(3))(2)·H(2)O (3). The AgSO(3)CF(3) double helicate was successfully crystallized from a mixture of CH(3)CN and CH(3)NO(2) and had the structure [Ag(2)1(2)](SO(3)CF(3))(2)·3CH(3)NO(2) (4). The linear AgBF(4) complex could not be isolated from the double helicate in solution; however, crystals grown from a solution containing both the AgBF(4) double helicate and linear complexes in CH(3)CN had the structure [Ag(2)1(CH(3)CN)(2)](BF(4))(2) (5). The AgBF(4) double helicate could only be crystallized from CH(3)NO(2) and had the structure [Ag(2)1(2)](BF(4))(2)·2CH(3)NO(2) (6).     

How to insulate a reactive site from a perfluoroalkyl group: photoelectron spectroscopy, calorimetric, and computational studies of long-range electronic effects in fluorous phosphines P((CH(2))(m)(CF(2))(7)CF(3))(3)

This study advances strategy and design in catalysts and reagents for fluorous and supercritical CO(2) chemistry by defining the structural requirements for insulating a typical active site from a perfluoroalkyl segment. The vertical ionization potentials of the phosphines P((CH(2))(m)R(f8))(3) (m = 2 (2) to 5 (5)) are measured by photoelectron spectroscopy, and the enthalpies of protonation by calorimetry (CF(3)SO(3)H, CF(3)C(6)H(5)). They undergo progressively more facile (energetically) ionization and protonation (P(CH(2)CH(3))(3) > 5 > 4 approximately equal to P(CH(3))(3) > 3 > 2), as expected from inductive effects. Equilibrations of trans-Rh(CO)(Cl)(L)(2) complexes (L = 2, 3) establish analogous Lewis basicities. Density functional theory is used to calculate the structures, energies, ionization potentials, and gas-phase proton affinities (PA) of the model phosphines P((CH(2))(m)()CF(3))(3) (2'-9'). The ionization potentials of 2'-5' are in good agreement with those of 2-5, and together with PA values and analyses of homodesmotic relationships are used to address the title question. Between 8 and 10 methylene groups are needed to effectively insulate a perfluoroalkyl segment from a phosphorus lone pair, depending upon the criterion employed. Computations also show that the first carbon of a perfluoroalkyl segment exhibits a much greater inductive effect than the second, and that ionization potentials of nonfluorinated phosphines P((CH(2))(m)CH(3))(3) reach a limit at approximately nine carbons (m = 8).     

Atmospheric chemistry of CH3CHF2 (HFC-152a): kinetics, mechanisms, and products of Cl atom- and OH radical-initiated oxidation in the presence and absence of NO(x)

Smog chamber/Fourier transform infrared (FTIR) and laser-induced fluorescence (LIF) spectroscopic techniques were used to study the atmospheric degradation of CH3CHF2. The kinetics and products of the Cl(2P(3/2)) (denoted Cl) atom- and the OH radical-initiated oxidation of CH3CHF2 in 700 Torr of air or N2; diluents at 295 +/- 2 K were studied using smog chamber/FTIR techniques. Relative rate methods were used to measure k(Cl + CH3CHF2) = (2.37 +/- 0.31) x 10(-13) and k(OH + CH3CHF2) = (3.08 +/- 0.62) x 10(-14) cm3 molecule(-1) s(-1). Reaction with Cl atoms gives CH3CF2 radicals in a yield of 99.2 +/- 0.1% and CH2CHF2 radicals in a yield of 0.8 +/- 0.1%. Reaction with OH radicals gives CH3CF2 radicals in a yield >75% and CH2CHF2 radicals in a yield <25%. Absolute rate data for the Cl reaction were measured using quantum-state selective LIF detection of Cl(2P(j)) atoms under pseudo-first-order conditions. The rate constant k(Cl + CH3CHF2) was determined to be (2.54 +/- 0.25) x 10(-13) cm3 molecule(-1) s(-1) by the LIF technique, in good agreement with the relative rate results. The removal rate of spin-orbit excited-state Cl(2P(1/2)) (denoted Cl) in collisions with CH3CHF2 was determined to be k(Cl + CH3CHF2) = (2.21 +/- 0.22) x 10(-10) cm3 molecule(-1) s(-1). The atmospheric photooxidation products were examined in the presence and absence of NO(x). In the absence of NO(x)(), the Cl atom-initiated oxidation of CH3CHF2 in air leads to formation of COF2 in a molar yield of 97 +/- 5%. In the presence of NO(x), the observed oxidation products include COF2 and CH3COF. As [NO] increases, the yield of COF2 decreases while the yield of CH3COF increases, reflecting a competition for CH3CF2O radicals. The simplest explanation for the observed dependence of the CH3COF yield on [NO(x)] is that the atmospheric degradation of CH3CF2H proceeds via OH radical attack to give CH3CF2 radicals which add O2 to give CH3CF2O2 radicals. Reaction of CH3CF2O2 radicals with NO gives a substantial fraction of chemically activated alkoxy radicals, [CH3CF2O]. In 1 atm of air, approximately 30% of the alkoxy radicals produced in the CH3CF2O2 + NO reaction possess sufficient internal excitation to undergo "prompt" (rate >10(10) s(-1)) decomposition to give CH3 radicals and COF2. The remaining approximately 70% become thermalized, CH3CF2O, and undergo decomposition more slowly at a rate of approximately 2 x 10(3) s(-1). At high concentrations (>50 mTorr), NO(x) is an efficient scavenger for CH3CF2O radicals leading to the formation of CH3COF and FNO.     

Dehydration reaction of hydroxyl substituted alkenes and alkynes on the Ru(2)S(2) complex

A variety of inter- and intramolecular dehydration was found in the reactions of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1) with hydroxyl substituted alkenes and alkynes. Treatment of 1 with allyl alcohol gave a C(3)S(2) five-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CH(OCH(2)CH=CH(2))S]](CF(3)SO(3))(4) (2), via C-S bond formation after C-H bond activation and intermolecular dehydration. On the other hand, intramolecular dehydration was observed in the reaction of 1 with 3-buten-1-ol giving a C(4)S(2) six-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2) [mu-SCH(2)CH=CHCH(2)S]](CF(3)SO(3))(4) (3). Complex 1 reacts with 2-propyn-1-ol or 2-butyn-1-ol to give homocoupling products, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCR=CHCH(OCH(2)C triple bond CR)S]](CF(3)SO(3))(4) (4: R = H, 5: R = CH(3)), via intermolecular dehydration. In the reaction with 2-propyn-1-ol, the intermediate complex having a hydroxyl group, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OH)S]](CF(3)SO(3))(4) (6), was isolated, which further reacted with 2-propyn-1-ol and 2-butyn-1-ol to give 4 and a cross-coupling product, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OCH(2)C triple bond CCH(3))S]](CF(3)SO(3))(4) (7), respectively. The reaction of 1 with diols, (HO)CHRC triple bond CCHR(OH), gave furyl complexes, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SSC=CROCR=CH]](CF(3)SO(3))(3) (8: R = H, 9: R = CH(3)) via intramolecular elimination of a H(2)O molecule and a H(+). Even though (HO)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OH) does not have any propargylic C-H bond, it also reacts with 1 to give [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)C(=CH(2))C(=C=C(CH(3))(2))]S](CF(3)SO(3))(4) (10). In addition, the reaction of 1 with (CH(3)O)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OCH(3)) gives [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(2)][mu-S=C(C(CH(3))(2)OCH(3))C=CC(CH(3))CH(2)S][Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)]](CF(3)SO(3))(4) (11), in which one molecule of CH(3)OH is eliminated, and the S-S bond is cleaved.     

Europium ion catalyzed methanolysis of esters at neutral pH and ambient temperature. catalytic Involvement of Eu3+(CH3O-)(CH3OH)x

The Eu(3+)-promoted methanolysis of three esters, p-nitrophenyl acetate (1), phenyl acetate (2), and ethyl acetate (3) is reported, as well as the potentiometric titration of Eu(3+) in MeOH at various [Eu(SO(3)CF(3))(3)] (SO(3)CF(3) = OTf). The titration data are analyzed in terms of two ionizations corresponding to macroscopic and values, which are respectively defined as the values at which the [CH(3)O(-)]/[Eu(3+)] = 0.5 and 1.5. As a function of increasing [Eu(OTf)(3)], increases slightly due to a proposed Eu(3+)/(-)OTf ion pairing effect, which tends to reduce the acidity of the metal-coordinated CH(3)OH, while decreases due to the formation of Eu(3+) dimers and oligomers which stabilize the (Eu(3+)(CH(3)O(-))(2))(n)forms through bridging of the methoxides between two or more metal ions. For ester 1, a detailed kinetic analysis of the reaction rates as a function of both [Eu(OTf)(3)] and in buffered methanol reveals that the /second-order rate constant (k(2)) plot for the catalyzed reaction follows a bell-shaped profile, suggesting that the active form is a Eu(3+)(CH(3)O(-)) monomer with a kinetic of 6.33 +/- 0.06 for formation and a of 8.02 +/- 0.10 for its conversion into the inactive (Eu(3+)(CH(3)O(-))(2))(n)oligomeric form. At higher values, plots of k(obs) vs [Eu(OTf)(3)] are linear at low metal concentration and plateau at higher metal concentration due to the formation of inactive higher order aggregates. The Eu(3+)(CH(3)O(-)) catalysis of the methanolysis of esters 1, 2, and 3 is substantial. Solutions of 10(-2) M of the catalyst at 7.12 accelerate the reaction relative to the methoxide reaction at that by 8 530 000-, 195 000 000- and 7 813 000-fold, respectively.     

Reaction of Sulfur with Ga-C Bonds: Synthesis and Characterization of [PyRGaS](3) Formed from Ga(S(2)R)(3) (R = Et, Me)

The reactions of Ga(CH(2)CH(3))(3) with variable amounts of elemental sulfur, S(8), in toluene or benzene at different temperatures result in the insertion of sulfur into the Ga-C bonds to form the compounds Ga[(S-S)CH(2)CH(3)](3) (I) and Ga[(S-S-S)CH(2)CH(3)](3) (II). Compound I was isolated from the reaction at low temperature while at room temperature; compound II was the major product. Compound II exhibited the maximum extent of sulfur insertion even when the reactions were carried out with more than 9.0 equiv of sulfur. The reactions of Ga(CH(3))(3) with various amounts of sulfur in toluene or benzene only result in the formation of compound III, Ga[(S-S)CH(3)](3). In pyridine at -30 degrees C, deinsertion of the sulfur atoms from Ga-S-S-C bonds was observed for the first time from compounds I and III resulting in formation of the six-membered Ga-S ring compounds IV, [PyEtGaS](3), and V, [PyMeGaS](3), respectively. Compounds IV and V were characterized by (1)H NMR, (13)C NMR, elemental analyses, thermogravimetric analysis, and single-crystal X-ray diffraction. Compound IV crystallized in the monoclinic space group P2(1)/n, with a = 9.288(2) ?, b = 14.966(2) ?, c = 19.588(3) ?, beta = 90.690(10) degrees, and Z = 4. Compound V crystallized in the monoclinic space group P2(1)/c, with a = 10.385(1) ?, b = 15.300(2) ?, c = 15.949(2) ?, beta = 107.01(1) degrees, Z = 4, unit cell volume = 2423.5(5) ?(3), R = 0.030, and R(w) = 0.026. The sulfur insertion reaction pathway was investigated by time-dependent and variable-temperature (1)H NMR spectroscopy.     

Structure and Properties of [Fe(4)S(4){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-) and [Fe(2)S(2){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-): Protection of the Fe-S Bond by Double NH.S Hydrogen Bonds

Iron-sulfur clusters containing a singly or doubly NH.S hydrogen-bonded arenethiolate ligand, [Fe(4)S(4)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), [Fe(4)S(4){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), [Fe(2)S(2)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), and [Fe(2)S(2){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), were synthesized as models of bacterial [4Fe-4S] and plant-type [2Fe-2S] ferredoxins. The X-ray structures and IR spectra of (PPh(4))(2)[Fe(4)S(4){S-2,6-(CH(3)CONH)(2)C(6)H(3)}(4)].2CH(3)CN and (NEt(4))(2)[Fe(2)S(2){S-2,6-(t-BuCONH)(2)C(6)H(3)}(4)] indicate that the two amide NH groups at the o,o'-positions are directed to the thiolate sulfur atom and form double NH.S hydrogen bonds. The NH.S hydrogen bond contributes to the positive shift of the redox potential of not only (Fe(4)S(4))(+)/(Fe(4)S(4))(2+) but also (Fe(4)S(4))(2+)/(Fe(4)S(4))(3+) in the [4Fe-4S] clusters as well as (Fe(2)S(2))(2+)/(Fe(2)S(2))(3+) in the [2Fe-2S] clusters. The doubly NH.S hydrogen-bonded thiolate ligand effectively prevents the ligand exchange reaction by benzenethiol because the two amide NH groups stabilize the thiolate by protection from dissociation.