Kinetics and mechanism of hydroboration reactions of HBBr2 · SMe2 and HBCl2 · SMe2 - Application of B NMR spectroscopy

The kinetics and mechanism of the hydroboration reactions of 1-octene with HBBr₂ · SMe₂ and HBCl₂ · SMe₂, in CH₂Cl₂ as a solvent, were studied. Rates of hydroboration were monitored using ¹¹B NMR spectroscopy. The reactions exhibited simple second-order kinetics of the form . The HBCl₂ · SMe₂ was found to be 20 times more reactive than the HBBr₂ · SMe₂. The overall activation parameters (ΔH^≠, ΔS^≠) for the reaction of HBBr₂ · SMe₂ with 1-octene were found to be 82 ± 1 kJ mol⁻¹, −18 ± 4 J K⁻¹ mol⁻¹ and with 1-hexyne were 78 ± 4 kJ mol⁻¹ −34 ± 12 J K⁻¹ mol⁻¹. For the reaction of HBCl₂ · SMe₂ with 1-octene, ΔH^≠ and ΔS^≠ were 104 ± 5 kJ mol⁻¹ and 43 ± 16 J K⁻¹ mol⁻¹, respectively. The activation parameters (ΔH^≠, ΔS^≠) for the dissociation of Me₂S from HBBr₂ · SMe₂ were found to be 104 ± 2 kJ mol⁻¹, +33 ± 8 J K⁻¹ mol⁻¹, respectively. Based on the activation parameters, it was concluded that the detaching of Me₂S from the boron centre follows a dissociative mechanism, while the hydroboration process follows an associative pathway. It was also concluded that the dissociation of Me₂S from the boron centre is the rate determining step.     

Change in mechanistic pathway of hydroboration: A detailed kinetic study of H2BBr·SMe2 and HBBr2·SMe2

Hydroboration reactions of 1-octene and 1-hexyne with H₂BBr·SMe₂ in CH₂Cl₂ were studied as a function of concentration and temperature, using ¹¹B NMR spectroscopy. The reactions exhibited saturation kinetics. The rate of dissociation of dimethyl sulfide from boron at 25 °C was found to be (7.36 ± 0.59 and 7.32 ± 0.90) × 10⁻³ s⁻¹ for 1-octene and 1-hexyne, respectively. The second order rate constants, k₂, for hydroboration worked out to be 7.00 ± 0.81 M s⁻¹ and 7.03 ± 0.70 M s⁻¹, while the overall composite second order rate constants, k K, were (3.30 ± 0.43 and 3.10 ± 0.37) × 10⁻² M s⁻¹, respectively at 25 °C. The entropy and enthalpy values were found to be large and positive for k₁, whilst for k₂ these were large and negative, with small values for enthalpies. This is indicative of a limiting dissociative (D) for the dissociation of Me₂S and associative mechanism (A) for the hydroboration process. The overall activation parameters, ΔH^≠ and ΔS^≠, were found to be 98 ± 2 kJ mol⁻¹ and +56 ± 7 J K⁻¹ mol⁻¹ for 1-octene whilst, in the case of 1-hexyne these were found out to be 117 ± 7 kJ mol⁻¹ and +119 ± 24 J K⁻¹ mol⁻¹, respectively. When comparing the kinetic data between H₂BBr·SMe₂ and HBBr₂·SMe₂, the results showed that the rate of dissociation of Me₂S from H₂BBr·SMe₂ is on average 34 times faster than it is in the case of HBBr₂·SMe₂. Similarly, the rate of hydroboration with H₂BBr·SMe₂ was found to be on average 11 times faster than it is with HBBr₂·SMe₂. It is also clear that by replacing a hydrogen substituent with a bromine atom in the case of H₂BBr·SMe₂ the mechanism for the overall process changes from limiting dissociative (D) to interchange associative (I_a).     

Synthesis, crystal structure and thermochemical behaviour of a barium complex [Ba(5-OH-BDC)(H2O)3] [5-OH-H2BDC = 5-hydroxyisophtalic acid]

A novel complex [Ba(5-OH-BDC)(H₂O)₃] [5-OH-H₂BDC = 5-hydroxyisophtalic acid] was synthesized and characterized by X-ray crystallography. The complex is Monoclinic P2₁/c, a = 11.1069(4), b = 14.8192(6), c = 6.5005(2) Å, β = 103.465(3)° and Z = 4, which exhibits a three-dimensional framework formed by linkage of adjacent two-dimensional (6, 3) layers via intermolecular hydrogen bonds. The title complex has been studied by IR spectrum and TG-DTG. The constant-volume combustion energy of the complex, Δ_cU, was determined as being (−3210.45 ± 1.41) kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpy of combustion, , and the standard enthalpy of formation, , were calculated as being (−3207.97 ± 1.41) and (−1922.80 ± 1.76) kJ mol⁻¹, respectively. A calculation model for determining the specific heat capacity of the complex with an improved RD496-III microcalorimeter is also derived. The specific heat capacity of the complex was (6158.387 ± 0.187) J mol⁻¹ K⁻¹.     

Vaporization of DyI3(s) and thermochemistry of the homocomplexes (DyI3)2(g) and (DyI3)3(g)

The vaporization of DyI₃(s) was investigated in the temperature range between 833 and 1053 K by the use of Knudsen effusion mass spectrometry. The ions DyI₂⁺, DyI₃⁺, Dy₂I₄⁺, Dy₂I₅⁺, Dy₃I₇⁺, and Dy₃I₈⁺ were detected in the mass spectrum of the equilibrium vapor. The gaseous species DyI₃, (DyI₃)₂, and (DyI₃)₃ were identified and their partial pressures determined. Enthalpies and entropies of sublimation resulted according to the second- and third-law methods. The following sublimation enthalpies at 298 K were determined for the gaseous species given in brackets: 274.8±8.2 kJ mol⁻¹ [DyI₃], 356.0±11.3 kJ mol⁻¹ [(DyI₃)₂], and 436.6±14.6 kJ mol⁻¹ [(DyI₃)₃]. The enthalpy changes of the dissociation reactions (DyI₃)₂=2 DyI₃ and (DyI₃)₃=3 DyI₃ were obtained as Δ_dH°(298)=193.3±5.6 and 390.3±13.0 kJ mol⁻¹, respectively.     

Heat capacity and thermodynamic functions of LuPO4 in the range 0-320 K

The heat capacity of LuPO₄ was measured in the temperature range 6.51-318.03 K. Smoothed experimental values of the heat capacity were used to calculate the entropy, enthalpy and Gibbs free energy from 0 to 320 K. Under standard conditions these thermodynamic values are: (298.15 K) = 100.0 ± 0.1 J K⁻¹ mol⁻¹, S⁰(298.15 K) = 99.74 ± 0.32 J K⁻¹ mol⁻¹, H⁰(298.15 K) − H⁰(0) = 16.43 ± 0.02 kJ mol⁻¹, −[G⁰(298.15 K) − H⁰(0)]/T = 44.62 ± 0.33 J K⁻¹ mol⁻¹. The standard Gibbs free energy of formation of LuPO₄ from elements Δ_fG⁰(298.15 K) = −1835.4 ± 4.2 kJ mol⁻¹ was calculated based on obtained and literature data.     

Thermodynamic studies on SrFe12O19(s), SrFe2O4(s), Sr2Fe2O5(s) and Sr3Fe2O6(s)

The citrate-nitrate gel combustion route was used to prepare SrFe₂O₄(s), Sr₂Fe₂O₅(s) and Sr₃Fe₂O₆(s) powders and the compounds were characterized by X-ray diffraction analysis. Different solid-state electrochemical cells were used for the measurement of emf as a function of temperature from 970 to 1151 K. The standard molar Gibbs energies of formation of these ternary oxides were calculated as a function of temperature from the emf data and are represented as (SrFe₂O₄, s, T)/kJ mol⁻¹ (±1.7)=−1494.8+0.3754 (T/K) (970?T/K?1151). (Sr₂Fe₂O₅, s, T)/kJ mol⁻¹ (±3.0)=−2119.3+0.4461 (T/K) (970?T/K?1149). (Sr₃Fe₂O₆, s, T)/kJ mol⁻¹ (±7.3)=−2719.8+0.4974 (T/K) (969?T/K?1150).Standard molar heat capacities of these ternary oxides were determined from 310 to 820 K using a heat flux type differential scanning calorimeter (DSC). Based on second law analysis and using the thermodynamic database FactSage software, thermodynamic functions such as Δ_fH°(298.15 K), S°(298.15 K) S°(T), C_p°(T), H°(T), {H°(T)-H°(298.15 K)}, G°(T), free energy function (fef), Δ_fH°(T) and Δ_fG°(T) for these ternary oxides were also calculated from 298 to 1000 K.     

A computational study of SbnF5n (n = 1-4): Implications for the fluoride ion affinity of nSbF5

This contributions shows with a series of ab initio MP2 and DFT (BP86 and B3-LYP) computations with large basis sets up to cc-pVQZ quality that the literature value of the standard enthalpy of depolymerization of Sb₄F_20(g) to give SbF_5(g) (+18.5 kJ mol⁻¹) [J. Fawcett, J.H. Holloway, R.D. Peacock, D.R. Russell, J. Fluorine Chem. 20 (1982) 9] is by about 50 kJ mol⁻¹ in error and that the correct value of (Sb₄F_20(g)) is +68 ± 10 kJ mol⁻¹. We assign , , and values for Sb_nF_5n with n = 2-4 and compare the results to available experimental gas phase data. Especially the MP2/TZVPP values obtained in an indirect procedure that rely on isodesmic reactions or the highly accurate compound methods G2 and CBS-Q are in excellent agreement with the experimental data, and reproduce also the fine experimental details at temperatures of 423 and 498 K. With these data and the additional calculation of [Sb_nF_5n+1]⁻ (n = 1-4), we then assessed the fluoride ion affinities (FIAs) of Sb_nF_5n(g), nSbF_5(g), nSbF_5(l) and the standard enthalpies of formation of Sb_nF_5n(g) and [Sb_nF_5n+1]⁻_(g): FIA(Sb_nF_5n(g)) = 514 (n = 1), 559 (n = 2), 572 (n = 3) and 580 (n = 4) kJ mol⁻¹; FIA(nSbF_5(g)) = 667 (n = 2), 767 (n = 3) and 855 (n = 4) kJ mol⁻¹; FIA(nSbF_5(l)) = 434 (n = 1), 506 (n = 2), 528 (n = 3) and 534 (n = 4) kJ mol⁻¹. Error bars are approximately ±10 kJ mol⁻¹. Also the related Gibbs energies were derived. Δ_fH°([Sb_nF_5n+1]⁻_(g)) = −2064 ± 18 (n = 1), −3516 ± 25 (n = 2), −4919 ± 31 (n = 3) and −6305 ± 36 (n = 4) kJ mol⁻¹.     

Standard molar enthalpies of formation of Ln(C9H6NO)2(C2H3O2) (Ln: Nd, Sm)

Using an on-line solution-reaction isoperibol calorimeter, the standard molar enthalpies of reaction for the general thermochemical reaction: LnCl₃·6H₂O(s) + 2C₉H₇NO(s) + CH₃COONa(s) = Ln(C₉H₆NO)₂(C₂H₃O₂)(s) + NaCl(s) + 2HCl(g) + 6H₂O(l) (Ln: Nd, Sm), were determined at T=298.15 K, as  kJ mol^−l, respectively. From the mentioned standard molar enthalpies of reaction and other auxiliary thermodynamic quantities, the standard molar enthalpies of formation of Ln(C₉H₆NO)₂(C₂H₃O₂)(s) (Ln: Nd, Sm), at T=298.15 K, have been derived to be: −(1494.7±3.3) and −(1501.5±3.4) kJ mol^−l, respectively.     

Synthesis, characterization and standard molar enthalpy of formation of La(C7H5O3)2·(C9H6NO)

The product from reaction of lanthanum chloride seven-hydrate with salicylic acid and 8-hydroxyquinoline, La(C₇H₅O₃)₂·(C₉H₆NO), was characterized by IR, elemental analysis, molar conductance, and thermogravimetric analysis. The standard molar enthalpies of solution of [LaCl₃·7H₂O (s)], [2C₇H₆O₃ (s)], [C₉H₇NO (s)] and [La(C₇H₅O₃)₂·(C₉H₆NO) (s)] in a mixed solvent of absolute ethyl alcohol, dimethyl formamide (DMF) and perchloric acid were determined by calorimetry to be [LaCl₃·7H₂O (s), 298.15 K] = −96.45 ± 0.18 kJ mol⁻¹, [2C₇H₆O₃ (s), 298.15 K] = 14.99 ± 0.17 kJ mol⁻¹, [C₉H₇NO (s), 298.15 K] = −3.86 ± 0.06 kJ mol⁻¹ and [La(C₇H₅O₃)₂·(C₉H₆NO) (s), 298.15 K] = −117.78 ± 0.11 kJ mol⁻¹. The enthalpy change of the reaction

(1)     

Thermodynamic properties of the gaseous barium silicates BaSiO2 and BaSiO3

In the present study, the stability of gaseous barium silicates was confirmed by the high temperature mass spectrometry. On the basis of equilibrium constants measured for gas-phase reactions, the standard formation enthalpies were determined for gaseous barium silicates as (−510 ± 15) kJ · mol⁻¹ and (−884 ± 18) kJ · mol⁻¹ at 298 K; standard atomization enthalpies as (1637 ± 17) kJ · mol⁻¹ and (2318 ± 20) kJ · mol⁻¹ at 298 K for BaSiO₂ and BaSiO₃, respectively. Based on the results obtained the critical analysis of the literature data was carried out.     

Thermodynamic properties of BaCeO3 and BaZrO3 at low temperatures

Specific heat capacities (C_p) of polycrystalline samples of BaCeO₃ and BaZrO₃ have been measured from about 1.6 K up to room temperature by means of adiabatic calorimetry. We provide corrected experimental data for the heat capacity of BaCeO₃ in the range T < 10 K and, for the first time, contribute experimental data below 53 K for BaZrO₃. Applying Debye's T³-law for T → 0 K, thermodynamic functions as molar entropy and enthalpy are derived by integration. We obtain C_p = 114.8 (±1.0) J mol⁻¹ K⁻¹, S° = 145.8 (±0.7) J mol⁻¹ K⁻¹ for BaCeO₃ and C_p = 107.0 (±1.0) J mol⁻¹ K⁻¹, S° = 125.5 (±0.6) J mol⁻¹ K⁻¹ for BaZrO₃ at 298.15 K. These results are in overall agreement with previously reported studies but slightly deviating, in both cases. Evaluations of C_p(T) yield Debye temperatures and identify deviations from the simple Debye-theory due to extra vibrational modes as well as anharmonicity. The anharmonicity turns out to be more pronounced at elevated temperatures for BaCeO₃. The characteristic Debye temperatures determined at T = 0 K are Θ₀ = 365 (±6) K for BaCeO₃ and Θ₀ = 402 (±9) K for BaZrO₃.     

Synthesis, structure, and magnetic and electronic properties of Cs2Hg2USe5

The compound Cs₂Hg₂USe₅ was obtained from the solid-state reaction of U, HgSe, Cs₂Se₃, Se, and CsI at 1123 K. This material crystallizes in a new structure type in space group P2/n of the monoclinic system with a cell of dimensions a=10.276(6) Å, b=4.299(2) Å, c=15.432(9) Å, β=101.857(6) Å, and V=667.2(6) Å³. The structure contains layers separated by Cs atoms. Within the layers are distorted HgSe₄ tetrahedra and regular USe₆ octahedra. In the temperature range of 25-300 K Cs₂Hg₂USe₅ displays Curie-Weiss paramagnetism with μ_eff=3.71(2) μ_B. The compound exhibits semiconducting behavior in the [010] direction; the conductivity at 298 K is 3×10⁻³ S/cm. Formal oxidation states of Cs/Hg/U/Se may be assigned as +1/+2/+4/− 2, respectively.     

Kinetic study of the oxidative addition reaction between methyl iodide and [Rh(FcCOCHCOCF3)(CO)(PPh3)]: Structure of [Rh(FcCOCHCOCF3)(CO)(PPh3)(CH3)(I)]

The kinetics of oxidative addition of CH₃I to [Rh(FcCOCHCOCF₃)(CO)(PPh₃)], where Fc = ferrocenyl and (FcCOCHCOCF₃)⁻ = fctfa = ferrocenoylacetonato, have been studied utilizing UV/Vis, IR, ¹H and ³¹P NMR techniques. Three definite sets of reactions involving isomers of at least two distinctly different classes of Rh^III-alkyl and two different classes of Rh^III-acyl species were observed. Rate constants for this reaction in CHCl₃ at 25 °C, applicable to the reaction sequence below, were determined as k₁ = 0.00611(1) dm³ mol⁻¹ s⁻¹, k₋₁ = 0.0005(1) s⁻¹, k₃ = 0.00017(2) s⁻¹ and k₄ = 0.0000044(1) s⁻¹ while k₋₃ ? k₃ and k₋₄ ? k₄ but both ≠0. The indeterminable equilibrium K₂ was fast enough to be maintained during Rh^I depletion in the first set of reactions and during the Rh^IIIalkyl2 formation in the second set of reactions. From a ¹H and ³¹P NMR study in CDCl₃, K_c1 was found to be 0.68, K_c2 = 2.57, K_c3 = 1.00, K_c4 = 4.56 and K_c5 = 1.65.     

Thermodynamics of BaNd2Fe2O7(s) and BaNdFeO4(s) in the system BaNdFeO

Two compounds, BaNd₂Fe₂O₇(s) and BaNdFeO₄(s) in the quaternary system BaNdFeO were prepared by citrate-nitrate gel combustion route and characterized by X-ray diffraction analysis. Heat capacities of these two oxides were measured in two different temperature ranges: (i) 130-325 K and (ii) 310-845 K, using a heat flux type differential scanning calorimeter. Two different types of solid-state electrochemical cells with CaF₂(s) as the solid electrolyte were employed to measure the e.m.f. as a function of temperature. The standard molar Gibbs energies of formation of these quaternary oxides were calculated as a function of temperature from the e.m.f. data. The standard molar enthalpies of formation from elements at 298.15 K, ΔfHm° (298.15 K) and the standard entropies, Sm° (298.15 K) of these oxides were calculated by the second law method. The values of ΔfHm° (298.15 K) and Sm° (298.15 K) obtained for BaNd₂Fe₂O₇(s) are: −2756.9 kJ mol⁻¹ and 234.0 J K⁻¹ mol⁻¹ whereas those for BaNdFeO₄(s) are: −2061.5 kJ mol⁻¹ and 91.6 J K⁻¹ mol⁻¹, respectively.     

Synthesis and crystal structure of new uranyl tungstates M2(UO2)(W2O8) (M=Na, K), M2(UO2)2(WO5)O (M=K, Rb), and Na10(UO2)8(W5O20)O8

The solid-state reactions of UO₃ and WO₃ with M₂CO₃ (M=Na, K, Rb) at 650°C for 5 days result, accordingly the starting stoichiometry, in the formation of M₂(UO₂)(W₂O₈) (M=Na (1), K (2)), M₂(UO₂)₂(WO₅)O (M=K (3), Rb (4)), and Na₁₀(UO₂)₈(W₅O₂₀)O₈ (5). The crystal structures of compounds 2, 3, 4, and 5 have been determined by single-crystal X-ray diffraction using Mo(Kα) radiation and a charge-coupled device detector. The crystal structures were solved by direct methods and Fourier difference techniques, and refined by a least-squares method on the basis of F² for all unique reflections. For (1), unit-cell parameters were determined from powder X-ray diffraction data. Crystallographic data: 1, monoclinic, a=12.736(4) Å, b=7.531(3) Å, c=8.493(3) Å, β=93.96(2)°, ρ_cal=6.62(2) g/cm³, ρ_mes=6.64(1) g/cm³, Z=4; 2, orthorhombic, space group Pmcn, a=7.5884(16) Å, b=8.6157(18) Å, c=13.946(3) Å, ρ_cal=6.15(2) g/cm³, ρ_mes=6.22(1) g/cm³, Z=8, R1=0.029 for 80 parameters with 1069 independent reflections; 3, monoclinic, space group P2₁/n, a=8.083(4) Å, b=28.724(5) Å, c=9.012(4) Å, β=102.14(1)°, ρ_cal=5.83(2) g/cm³, ρ_mes=5.90(2) g/cm³, Z=8, R1=0.037 for 171 parameters with 1471 reflections; 4, monoclinic, space group P2₁/n, a=8.234(1) Å, b=28.740(3) Å, c=9.378(1) Å, β=104.59(1)°, ρ_cal=6.13(2) g/cm³,  g/cm³, Z=8, R1=0.037 for 171 parameters with 1452 reflections; 5, monoclinic, space group C2/c, a=24.359(5) Å, b=23.506(5) Å, c=6.8068(14) Å, β=94.85(3)°, ρ_cal=6.42(2) g/cm³,  g/cm³, Z=8, R1=0.036 for 306 parameters with 5190 independent reflections. The crystal structure of 2 contains linear one-dimensional chains formed from edge-sharing UO₇ pentagonal bipyramids connected by two octahedra wide (W₂O₈) ribbons formed from two edge-sharing WO₆ octahedra connected together by corners. This arrangement leads to [UW₂O₁₀]²⁻ corrugated layers parallel to (001). Owing to the unit-cell parameters, compound 1 probably contains similar sheets parallel to (100). Compounds 3 and 4 are isostructural and the structure consists of bi-dimensional networks built from the edge- and corner-sharing UO₇ pentagonal bipyramids. This arrangement creates square sites occupied by W atoms, a fifth oxygen atom completes the coordination of W atoms to form WO₅ distorted square pyramids. The interspaces between the resulting [U₂WO₁₀]²⁻ layers parallel to plane are occupied by K or Rb atoms. The crystal structure of compound 5 is particularly original. It is based upon layers formed from UO₇ pentagonal bipyramids and two edge-shared octahedra units, W₂O₁₀, by the sharing of edges and corners. Two successive layers stacked along the [100] direction are pillared by WO₄ tetrahedra resulting in sheets of double layers. The sheets are separated by Na⁺ ions. The other Na⁺ ions occupy the rectangular tunnels created within the sheets. In fact complex anions W₅O₂₀¹⁰⁻ are built by the sharing of the four corners of a WO₄ tetrahedron with two W₂O₁₀ dimmers, so, the formula of compound 5 can be written Na₁₀(UO₂)₈(W₅O₂₀)O₈.     

Low-temperature heat-capacity and standard molar enthalpy of formation of copper l-threonate hydrate Cu(C4H6O5)·0.5H2O(s)

The solid copper l-threonate hydrate, Cu(C₄H₆O₅)·0.5H₂O, was synthesized by the reaction of l-threonic acid with copper dihydrocarbonate and characterized by means of chemical and elemental analyses, IR and TG-DTG. Low-temperature heat-capacity of the title compound has been precisely measured with a small sample precise automated adiabatic calorimeter over the temperature range from 77 to 390 K. An obvious process of the dehydration occurred in the temperature range between 353 and 370 K. The peak temperature of the dehydration of the compound has been observed to be 369.304 ± 0.208 K by means of the heat-capacity measurements. The molar enthalpy, Δ_dH_m, of the dehydration of the resulting compound was of 16.490 ± 0.063 kJ mol⁻¹. The experimental molar heat capacities of the solid from 77 to 353 K and the solid from 370 to 390 K have been, respectively, fitted to tow polynomial equations with the reduced temperatures by least square method. The constant-volume energy of combustion of the compound, Δ_cU_m, has been determined as being −1616.15 ± 0.72 kJ mol⁻¹ by an RBC-II precision rotating-bomb combustion calorimeter at 298.15 K. The standard molar enthalpy of formation of the compound, , has been calculated to be −1114.76 ± 0.81 kJ mol⁻¹ from the combination of the data of standard molar enthalpy of combustion of the compound with other auxiliary thermodynamic quantities.     

Kinetic investigation of a ruthenium metathesis catalyst

The complex [(IMesH₂)(PPh₂Cy)Cl₂RuCHPh] was synthesised and shown to be an active catalyst in ring-closing metathesis of a diallylmalonate. Its phosphine exchange was investigated in C₆D₆ using magnetisation transfer ³¹P NMR spectroscopy and it was found to operate via a dissociative mechanism with k³⁵³ = 4.1 ± 0.9 s⁻¹, ΔH^‡ = 84 ± 10 kJ mol⁻¹ and ΔS^‡ = 4 ± 28 J mol⁻¹ K⁻¹.     

Energetics of cobalt phosphate frameworks: α, β, and red NaCoPO4

Thermal behavior, relative stability, and enthalpy of formation of α (pink phase), β (blue phase), and red NaCoPO₄ are studied by differential scanning calorimetry, X-ray diffraction, and high-temperature oxide melt drop solution calorimetry. Red NaCoPO₄ with cobalt in trigonal bipyramidal coordination is metastable, irreversibly changing to α NaCoPO₄ at 827 K with an enthalpy of phase transition of −17.4±6.9 kJ mol⁻¹. α NaCoPO₄ with cobalt in octahedral coordination is the most stable phase at room temperature. It undergoes a reversible phase transition to the β phase (cobalt in tetrahedra) at 1006 K with an enthalpy of phase transition of 17.6±1.3 kJ mol⁻¹. Enthalpy of formation from oxides of α, β, and red NaCoPO₄ are −349.7±2.3, −332.1±2.5, and −332.3±7.2 kJ mol⁻¹; standard enthalpy of formation of α, β, and red NaCoPO₄ are −1547.5±2.7, −1529.9±2.8, and −1530.0±7.3 kJ mol⁻¹, respectively. The more exothermic enthalpy of formation from oxides of β NaCoPO₄ compared to a structurally related aluminosilicate, NaAlSiO₄ nepheline, results from the stronger acid-base interaction of oxides in β NaCoPO₄ (Na₂O, CoO, P₂O₅) than in NaAlSiO₄ nepheline (Na₂O, Al₂O₃, SiO₂).     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

Isothermal and polythermal kinetics of depolymerization of C60 polymers

Isothermal depolymerization of the two polymers of C₆₀, i.e. of 1D orthorhombic phase (O) and of “dimer state” (DS) have been studied by means of Infra-red spectroscopy in the temperature ranges 383-423 and 453-503 K, respectively. Differential Scanning Calorimetry (DSC) has been used to obtained depolymerization polytherms for O-phase and DS. Standard set of reaction models have been applied to describe depolymerization behavior of O-phase and DS. The choice of the reaction models was based primarily on the isotherms. Several models however demonstrated almost equal goodness of fit and were statistically indistinguishable. In this case we looked for simpler/more realistic mechanistic model of the reaction. For DS the first-order expression (Mampel equation) with the activation energy E_a = 134 ± 7 kJ mol⁻¹ and preexponential factor ln(A/s⁻¹) = 30.6 ± 2.1, fitted the isothermal data. This activation energy was nearly the same as the activation energy of the solid-state reaction of dimerization of C₆₀ reported in the literature. This made the enthalpy of depolymerization close to zero in accord with the DSC data on depolymerization of DS. Mampel equation gave the best fit to the polythermal data with E_a = 153 kJ mol⁻¹ and preexponential factor ln(A/s⁻¹) = 35.8. For O-phase two reasonable reaction models, i.e. Mampel equation and “contracting spheres” model equally fitted to the isothermal data with E_a = 196 ± 2 and 194 ± 8 kJ mol⁻¹, respectively and ln(A/s⁻¹) = 39.1 ± 0.5 and 37.4 ± 0.2, respectively and to polythermal data with E_a = 163 and 170 kJ mol⁻¹, respectively and ln(A/s⁻¹) = 32.5 and 29.5, respectively.