Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

Reactions of [(Me3Si)3CAlMe2] with substituted benzoic acids. Isolation of a rare organoalumoxane carboxylate

The reactivity of bulky tris(trimethylsilyl)methyl group substituted aluminum trialkyl [(Me₃Si)₃CAlMe₂·THF] (1) with a series of substituted benzoic acid derivatives has been investigated. An equimolar reaction of 4-methyl benzoic acid or 4-tert-butyl benzoic acid with 1 in toluene at 50 °C leads to the formation of cyclic dimeric aluminum carboxylates [(Me₃Si)₃CAl(Me)(μ-O₂CC₆H₄R)]₂ (R = Me 2; ^tBu 3). Reaction of 3,5-di-iso-propylsalicylic acid (H₂dipsa) with 1 leads to the exclusive isolation of a trimeric organoaluminum carboxylate [(Me₃Si)₃CAl(μ-dipsa)]₃ (4), in which each aluminum is bound to two carboxylates, a phenoxide, and an alkyl group and produce a 12-membered macrocycle. Deliberate, but controlled, introduction of water in the form of 3,5-di-tert-butyl salicylic acid monohydrate (H₂dtbsa·H₂O) in the reaction with 1 in toluene leads to the isolation of carboxylate [(Me₃Si)₃CAl(μ-O)(μ-Hdtbsa)}₂] (5) with a bicyclic structure. Compound 5 represents a rare example of an organoalumoxane carboxylate that simultaneously possesses alkyl, oxo, and carboxylate moieties on aluminum.     

Synthesis, characterization and Schlenk equilibrium studies of methylmagnesium compounds with O- and N-donor ligands - the unexpected behavior of [MgMeBr(pmdta)] (pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine)

MgMe₂ (1) was found to react with 1,4-diazabicyclo[2.2.2]octane (dabco) in tetrahydrofuran (thf) yielding a binuclear complex [{MgMe₂(thf)}₂(μ-dabco)] (2). Furthermore, from reactions of MgMeBr with diglyme (diethylene glycol dimethyl ether), NEt₃, and tmeda (N,N,N′,N′-tetramethylethylenediamine) in etheral solvents compounds MgMeBr(L), (L = diglyme (5); NEt₃ (6); tmeda (7)) were obtained as highly air- and moisture-sensitive white powders. From a thf solution of 7 crystals of [MgMeBr(thf)(tmeda)] (8) were obtained. Reactions of MgMeBr with pmdta (N,N,N′,N″,N″-pentamethyldiethylenetriamine) in thf resulted in formation of [MgMeBr(pmdta)] (9) in nearly quantitative yield. On the other hand, the same reaction in diethyl ether gave MgMeBr(pmdta) · MgBr₂(pmdta) (10) and [{MgMe₂(pmdta)}₇{MgMeBr(pmdta)}] (11) in 24% and 2% yield, respectively, as well as [MgMe₂(pmdta)] (12) as colorless needle-like crystals in about 26% yield. The synthesized methylmagnesium compounds were characterized by microanalysis and ¹H and ¹³C NMR spectroscopy. The coordination-induced shifts of the ¹H and ¹³C nuclei of the ligands are small; the largest ones were found in the tmeda and pmdta complexes. Single-crystal X-ray diffraction analyses revealed in 2 a tetrahedral environment of the Mg atoms with a bridging dabco ligand and in 8 a trigonal-bipyramidal coordination of the Mg atom. The single-crystal X-ray diffraction analyses of [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) showed them to be monomeric with five-coordinate Mg atoms. The square-pyramidal coordination polyhedra are built up of three N and two C atoms in 12 and three N and two Br atoms in 13. The apical positions are occupied by methyl and bromo ligands, respectively. Temperature-dependent ¹H NMR spectroscopic measurements (from 27 to −80 °C) of methylmagnesium bromide complexes MgMeBr(L) (L = thf (4); diglyme (5); NEt₃ (6); tmeda (7)) in thf-d₈ solutions indicated that the deeper the temperature the more the Schlenk equilibria are shifted to the dimethylmagnesium/dibromomagnesium species. Furthermore, at −80 °C the dimethylmagnesium compounds are predominant in the solutions of Grignard compounds 4-6 whereas in the case of the tmeda complex7 the equilibrium constant was roughly estimated to be 0.25. In contrast, [MgMeBr(pmdta)] (9) in thf-d₈ revealed no dismutation into [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) even up to −100 °C. In accordance with this unexpected behavior, 1:1 mixtures of 12 and 13 were found to react in thf at room temperature yielding quantitatively the corresponding Grignard compound 9. Moreover, the structures of [MgMeBr(pmdta)] (9c), [MgMe₂(pmdta)] (12c), and [MgBr₂(pmdta)] (13c) were calculated on the DFT level of theory. The calculated structures 12c and 13c are in a good agreement with the experimentally observed structures 12 and 13. The equilibrium constant of the Schlenk equilibrium (2 9c ? 12c + 13c) was calculated to be K_gas = 2.0 × 10⁻³ (298 K) in the gas phase. Considering the solvent effects of both thf and diethyl ether using a polarized continuum model (PCM) the corresponding equilibrium constants were calculated to be K_thf = 1.2 × 10⁻³ and K_ether = 3.2 × 10⁻³ (298 K), respectively.     

First cyclotrisiloxanes with three different R2Si-units of the general formula R2Si(OSiR2)(OSiR2)O (R2 = Me2Si(NSiMe3)2, R = Cl, Ot-Bu, R = Me)

The reaction of compound Me₂Si(NSiMe₃)₂Si(OH)Cl with Me₂SiCl₂ leads to the disiloxane Me₂Si(NSiMe₃)₂Si(Cl)OSi(Me₂)Cl (1). Hydrolysis of 1 in the presence of pyridine results in Me₂Si(NSiMe₃)₂Si(OH)OSi(Me₂)OH (2), which is allowed to react with SiCl₄ to give cyclotrisiloxane [Me₂Si(NSiMe₃)₂Si](OSiMe₂)(OSiCl₂)O (3). The treatment of 1 with (t-BuO)₂Si(OH)₂ forms cyclotrisiloxane [Me₂Si(NSiMe₃)₂Si](OSiMe₂)[OSi(Ot-Bu)₂]O (4). Compound 3 is obtained as a crystalline solid while 4 is an oily liquid. The ring size of these new types of cyclotrisiloxanes with three different R₂Si-units is confirmed by cryoscopy in benzene, ²⁹Si NMR chemical shifts and in case of 3, additionally by a single X-ray diffraction study. The different electronegativities of the substituents in the R₂Si-units lead to different bond lengths and bond angles within the Si₃O₃ cycle, which are discussed in detail in the molecular structure of 3.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Intramolecular oxidative addition of C-F and C-H bonds to [Pt(dba)2]. Crystal structure of [PtCl{Me2NCH2CH2NCH(2,4,5-C6HF3)}]

The reactions of compound [Pt(dba)₂] with ligands RCHNCH₂CH₂NMe₂ (1a-1f) in which R is a fluorinated aryl ring produced activation of C-F bonds when two fluorine atoms are present in the ortho positions of the aryl ring or activation of C-H bonds for ligands containing only one fluoro substituent in ortho. Both C-F and C-H bond activation are favoured by an increase of the degree of fluorination of the ring. Further reaction with lithium halides produced cyclometallated platinum (II) compounds [PtX(Me₂NCH₂CH₂NCHR)] (X = Br, Cl) (2) containing a terdentate [C,N,N′] ligand. The obtained compounds were fully characterized including a structure determination for [PtCl{Me₂NCH₂CH₂NCH(2,4,5-C₆HF₃)}] (2d′).     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

New organomercury(II) compounds containing intramolecular N → Hg interactions: crystal and molecular structure of [2-(Me2NCH2)C6H4]HgCl and [2-(Me2NCH2)C6H4]Hg[S(S)PPh2]

[2-(Me₂NCH₂)C₆H₄]HgCl (1) was prepared by reacting HgCl₂ with [2-(Me₂NCH₂)C₆H₄]Li in diethyl ether. The reactions of 1 with the sodium or ammonium salt of the appropriate thiophosphinato ligand, in 1:1 molar ratio, afford the isolation of [2-(Me₂NCH₂)C₆H₄]Hg[S(S)PR₂] [R=Me (2), Et (3), Ph (4)], [2-(Me₂NCH₂)C₆H₄]Hg[S(O)PPh₂] (5) and [2-(Me₂NCH₂)C₆H₄]Hg[S(S)P(OⁱPr)₂] (6). The compounds were investigated by IR and multinuclear NMR (¹H, ¹³C and ³¹P) spectroscopy. The molecular structures of 1 and 4 were determined by single-crystal X-ray diffraction. Due to the strong intramolecular coordination of the N atom of the pendant CH₂NMe₂ arm [Hg(1)-N(1) 2.764(6) and 2.725(4) Å in 1 and 4, respectively] both compounds exhibit a T-shaped (C,N)HgX core in the molecular unit, with almost linear arrangement of the covalent bonds [C(1)-Hg(1)-Cl(1) 176.93(18)° in 1, and C(1)-Hg(1)-S(1) 169.54(16)° in 4]. The crystals of 1 contain discrete monomeric molecules, while the crystals of 4 contain dimer associations built through asymmetric bridging dithiophosphinato ligands [Hg(1)-S(1) 2.3911(16) Å, Hg(1)?S(2a) 3.102(2) Å], thus resulting in an overall pseudo-trigonal bipyramidal (or seesaw) (C,N)HgS₂ core, with the nitrogen atom and the weekly bonded sulfur atom in equatorial positions [N(1)-Hg(1)?S(2a) 82.01(10)°].     

Synthesis and characterization of anionic lanthanide complexes {[o-(Me3SiN)2C6H4]Ln(MeC5H4)2}{Li(DME)3} (Ln = Yb, Sm, Nd) and their catalytic activity for the polymerization of methyl methacrylate

The syntheses and structures of a series of new lanthanide complexes supported by a chelating diamide ligand N,N′-bis(trimethylsilyl)-o-phenylenediamine are described. Anhydrous LnCl₃ reacts with Li₂[o-(Me₃SiN)₂C₆H₄], followed by treatment of NaC₅H₄Me in 1:1:2 molar ratio to afford the corresponding anionic complexes: {[o-(Me₃SiN)₂C₆H₄]Ln(MeC₅H₄)₂}{Li(DME)₃} [Ln = Yb (1), Sm (2), Nd(3)] in high yield. These complexes were characterized by elemental analysis, IR and ¹H NMR. The molecular structures of 1 and 2 were further determined by X-ray diffraction techniques to be an ion-pair complex composed by an anion [o-(Me₃SiN)₂C₆H₄]Ln(MeC₅H₄)₂] and a cation [Li(DME)₃]. Complexes 1-3 showed high catalytic activity for the polymerization of methyl methacrylate (MMA) at r.t., giving the syndiotactic-rich polymers with relatively narrow molecular weight distributions (M_w/M_n = 1.64-1.82).     

Syntheses, crystal structures and DFT studies of [Me3EM(CO)5] (E = Sb, Bi; M = Cr, W), cis-[(Me3Sb)2Mo(CO)4], and [Bu3BiFe(CO)4]

Syntheses of [Me₃SbM(CO)₅] [M = Cr (1), W (2)], [Me₃BiM(CO)₅] [M = Cr (3), W (4)], cis-[(Me₃Sb)₂Mo(CO)₄] (5), [^tBu₃BiFe(CO)₄] (6), crystal structures of 1-6 and DFT studies of 1-4 are reported.     

Synthetic and X-ray diffraction studies of borosiloxane cages [R′Si(ORBO)3SiR′] and the adducts of [BuSi{O(PhB)O}3SiBu] with pyridine or N,N,N′,N′-tetramethylethylenediamine

Eleven borosiloxane [R′Si(ORBO)₃SiR′] compounds where R′ = Bu^t and R = Ph (1), 4-PhC₆H₄ (2), 4-Bu^tC₆H₄ (3), 3-NO₂C₆H₄ (4), 4-CH(O)C₆H₄ (5), CpFeC₅H₄ (6), 4-C(O)CH₃C₆H₄ (7), 4-ClC₆H₄ (8), 2,4-F₂C₆H₃ (9), and R′ = cyclo-C₆H₁₁ and R = Ph (10), and 4-BrC₆H₄ (11) have been synthesized and characterized by spectroscopic (IR, NMR), mass spectrometric and, for compounds where R′ = Bu^t and R = 4-PhC₆H₄ (2), 4-Bu^tC₆H₄ (3), 3-NO₂C₆H₄ (4), CpFeC₅H₄ (6) and 2,4-F₂C₆H₃ (9), X-ray diffraction studies. These compounds contain trigonal planar RBO₂ and tetrahedral R′SiO₃ units located around 11-atom “spherical” Si₂O₆B₃ cores. The dimensions of the Si₂O₆B₃ cores in compounds 2, 3, 4, 6 and 9 are remarkably similar. The reaction between [Bu^tSi{O(PhB)O}₃SiBu^t] (1), and excess pyridine yields the 1:1 adduct [Bu^tSi{O(PhB)O}SiBu^t]. NC₅H₅ (12) while the reaction between 1 and N,N,N′,N′-tetramethylethylenediamine in equimolar amounts affords a 2:1 borosiloxane:amine adduct [Bu^tSi{O(PhB)O}₃SiBu^t]₂ · Me₂NCH₂CH₂NMe₂ (13). Compounds 12 and 13 were characterised with IR and (¹H, ¹³C and¹¹B) NMR spectroscopies and the structure of the pyridine complex 12 was determined with X-ray techniques.     

Synthesis and coordination chemistry of new tetradentate N2S2 donor Schiff-base ligand ca2-dapte: Mononuclear and dinuclear copper(I) complexes [Cu(ca2dapte)]ClO4 and [{Cu(PPh3)(X)}2(ca2dapte)] (X = I and Br)

A mononuclear copper(I) complex, [Cu(ca₂dapte)]ClO₄ (1), and two dinuclear copper(I) complexes, [{Cu(PPh₃)(X)}₂(ca₂dapte)] (X = I (2) and Br (3)), of a new tetradentate N₂S₂ donor Schiff-base ligand ca₂dapte have been prepared (ca₂dapte = N,N′-bis(trans-cinnamaldehyde)-1,2-di(o-iminophenylthio)ethane). These compounds have been characterized by elemental analyses (CHN), FT-IR, UV–Vis and ¹H NMR spectroscopy. The crystal structures of these copper(I) complexes have been determined by single-crystal X-ray diffraction. The coordination geometry around Cu(I) centers in these complexes is a distorted tetrahedron. The ca₂dapte is coordinated to Cu(I) as a tetradentate ligand in 1, while it acts as a bis-bidentate bridging ligand in 2 and 3.     

Synthesis, structures and electrochemical properties of ruthenium (II) complexes bearing bidentate 1,8-naphthyridine and terpyridine analogous (N,N,C)-tridentate ligands

1,8-Naphthyridine (napy) and terpyridine-analogous (N,N,C) tridentate ligands coordinated ruthenium (II) complexes, [RuL(napy-κ²N,N′) (dmso)](PF₆)₂ (1: L=L¹=N″-methyl-4′-methylthio-2,2′:6′,4″-terpyridinium, 2: L = L² = N″-methyl-4′-methylthio-2,2′:6′,3″-terpyridinium) were prepared and their chemical and electrochemical properties were characterized. The structure of complex 1 was determined by X-ray crystallographic study, showing that it has a distorted octahedral coordination style. The cyclic voltammogram of 1 in DMF exhibited two reversible ligand-localized redox couples. On the other hand, the CV of 2 shows two irreversible cathodic peaks, due to the Ru-C bond of 2 containing the carbenic character. The IR spectra of 1 in CO₂-saturated CH₃CN showed the formation of Ru-(η¹-CO₂) and Ru-CO complexes under the controlled potential electrolysis of the solution at −1.44 V (vs. Fc/Fc⁺). The electrochemical reduction of CO₂ catalyzed by 1 at −1.54 V (vs. Fc/Fc⁺) in DMF-0.1 M Me₄NBF₄ produced CO with a small amount of HCO₂H.     

A family of three-dimensional porous coordination polymers with general formula (Kat)2[{M(H2O)n}3{Re6Q8(CN)6}2]·xH2O (Q=S, Se; n=1.5, 2)

The X-ray crystal structures of a series of new compounds (H₃O)₂[{Mn(H₂O)_1.5}₃{Re₆Se₈(CN)₆}₂]·19H₂O (1), (Me₄N)₂[{Co(H₂O)_1.5}₃{Re₆S₈(CN)₆}₂]·13H₂O (2), (Me₄N)₂[{Co(H₂O)_1.5}₃{Re₆Se₈(CN)₆}₂]·3H₂O (3), (Et₄N)₂[{Mn(H₂O)₂}₃{Re₆Se₈(CN)₆}₂]·6.5H₂O (4), (Et₄N)₂[{Ni(H₂O)₂}₃{Re₆S₈(CN)₆}₂]·6.5H₂O (5), and (Et₄N)₂[{Co(H₂O)₂}₃{Re₆S₈(CN)₆}₂]·10H₂O (6) are reported. All six compounds are isostructural crystallizing in cubic space group with four formulae per unit cell. For compounds 1, 3-5 the following parameters were found: (1) a=19.857(2) Å, R1=0.0283; (3 at 150 K) a=19.634(1) Å, R1=0.0572; (4) a=20.060(2) Å, R1=0.0288; (5) a=19.697(2) Å, R1=0.0224. The structures consist three-dimensional cyano-bridged framework formed by cyano cluster anions [Re₆Q₈(CN)₆]⁴⁻, Q=S, Se and transition metal cations, M²⁺=Mn²⁺, Co²⁺, Ni²⁺. Water molecules and large organic cations Me₄N⁺ and Et₄N⁺ are included in cavities of this framework. Porosity of the framework, its ability to accommodate different cations and water molecules by little changes in the structure, as well as distortion of coordination framework under loss of water of crystallization is discussed.     

Organoselenium(II) and selenium(IV) compounds containing 2-(Me2NCH2)C6H4 moieties: solution behavior and solid state structure

The cleavage of the Se-Se bond in [2-(Me₂NCH₂)C₆H₄]₂Se₂ (1) was achieved by treatment with SO₂Cl₂ (1:1 molar ratio) or elemental halogens to yield [2-(Me₂NCH₂)C₆H₄]SeX [X = Cl (2), Br (3), I (4)]. Oxidation of 1 with SO₂Cl₂ (1:3 molar ratio) gave [2-(Me₂NCH₂)C₆H₄]SeCl₃ (5). [2-(Me₂NCH₂)C₆H₄]SeS(S)CNR₂ [R = Me (6), Et (7)] were prepared by reacting [2-(Me₂NCH₂)C₆H₄]SeBr with Na[S₂CNR₂] · nH₂O (R = Me, n = 2; R = Et, n = 3). The reaction of 3 with K[(SPMe₂)(SPPh₂)N] resulted in isolation of [2-(Me₂NCH₂)C₆H₄]Se-S-PMe₂N-PPh₂S (8). The compounds were characterized by solution NMR spectroscopy (¹H, ¹³C, ³¹P, ⁷⁷Se, 2D experiments). The solid-state molecular structures of 2, 4-8 were established by single crystal X-ray diffraction. All compounds are monomeric, with the N atom of the pendant CH₂NMe₂ arm involved in a three-center-four-electron N?Se-X (X = halogen, S) bond. This results in a T-shaped coordination geometry for the Se(II) atom in 2, 4, 6-8. In 5, the Se(IV) atom achieves a square pyramidal coordination in the mononuclear unit. Loosely connected dimers are formed through intermolecular Se?Cl interactions (3.40 Å); the overall coordination geometry being distorted octahedral. In all compounds hydrogen bonds involving halide or sulfur atoms generate supramolecular associations in crystals.     

Reactions of benzopinacol with group 13 alkyl metals:: Crystal structure of Me6In4[OC(C6H5)2C(C6H5)2O]2(OCH3)2, a new alkylalkoxo indium diolate

Reactions of Me₅Al₃[OC(C₆H₅)₂C(C₆H₅)₂O]₂ (1) with alcohols ROH (R = Me, Et, ^tBu) in a 1:1 molar ratio afforded the compound Me₂Al₂[OC(C₆H₅)₂C(C₆H₅)₂O]₂(C₄H₈O) (2) and a mixture of methylaluminum alkoxides. The alcohols acted as the factor formally eliminating a molecule of Me₃Al (as a methylaluminum alkoxide) from compound 1. ^tBu₃Al reacted with an equimolar amount of benzopinacol to form the monomeric complex ^tBuAl[OC(C₆H₅)₂C(C₆H₅)₂O](C₄H₈O) (3). Reactions of Me₃Ga and Me₃In with benzopinacol yielded trinuclear complexes Me₅M₃[OC(C₆H₅)₂C(C₆H₅)₂O]₂ (4 (M = Ga), 5 (M = In)), isostructural to compound 1. In the presence of water and alcohols, compounds 4 and 5 underwent a decomposition reaction to benzopinacol and a mixture of metalloxanes and alkoxides. An unusual methylmethoxo indium benzopinacolate Me₆In₄[OC(C₆H₅)₂C(C₆H₅)₂O]₂(OCH₃)₂ (6) was obtained in the reaction of benzopinacol with Me₃In and Me₂InOMe in a 1:1:1 molar ratio. Molecular structures of the compounds 3, 4 and 6 were determined by X-ray crystallography.