Tuning the sulfur-heterometal interaction in organolead(IV) complexes of [Pt2(μ-S)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with Ph₃PbCl, Ph₂PbI₂, Ph₂PbBr₂ and Me₃PbOAc result in the formation of bright yellow to orange solutions containing the cations [Pt₂(μ-S)₂(PPh₃)₄PbR₃]⁺ (R₃ = Ph₃, Ph₂I, Ph₂Br, Me₃) isolated as PF₆⁻ or BPh₄⁻ salts. In the case of the Me₃Pb and Et₃Pb systems, a prolonged reaction time results in formation of the alkylated species [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = Me, Et). X-ray structure determinations on [Pt₂(μ-S)₂(PPh₃)₄PbMe₃]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PbPh₂I]PF₆ have been carried out, revealing different coordination modes. In the Me₃Pb complex, the (four-coordinate) lead atom binds to a single sulfur atom, while in the Ph₂PbI adduct coordination of both sulfurs results in a five-coordinate lead centre. These differences are related to the electron density on the lead centre, and indicate that the interaction of the heterometal centre with the {Pt₂S₂} metalloligand core can be tuned by variation of the heteroatom substituents. The species [Pt₂(μ-S)₂(PPh₃)₄PbR₃]⁺ display differing fragmentation pathways in their ESI mass spectra, following initial loss of PPh₃ in all cases; for R = Ph, loss of PbPh₂ occurs, yielding [Pt₂(μ-S)₂(PPh₃)₃Ph]⁺, while for R = Me, reductive elimination of ethane gives [Pt₂(μ-S)₂(PPh₃)₃PbMe]⁺, which is followed by loss of CH₄.     

Further investigations on the methylation chemistry of [Pt2(µ-S)2(PPh3)4]

The methylation product of the reaction between [Pt₂(µ-S)₂(PPh₃)₄] and MeI in diethyl ether has been reinvestigated using positive-ion electrospray mass spectrometry and found to be contaminated with the dimethylated iodide-containing complex [Pt₂(µ-SMe)₂(PPh₃)₃I]⁺, which is believed to be formed early in the reaction. New, facile routes to the monomethylated complex [Pt₂(µ-S)(µ-SMe)(PPh₃)₄]⁺ have been developed using mild methylating agents. Heating [Pt₂(µ-S)₂(PPh₃)₄] in neat dimethyl methylphosphonate results in rapid and selective conversion to [Pt₂(µ-S)(µ-SMe)(PPh₃)₄]⁺; methylation with Me₃S⁺OH^? in refluxing methanol also affords pure [Pt₂(µ-S)(µ-SMe)(PPh₃)₄]⁺, isolated as its hexafluorophosphate salt. The X-ray structure of the previously reported complex [Pt₂(µ-SMe)₂(PPh₃)₂I₂] has also been undertaken.     

Coordination chemistry of the [Pt2(μ-S)2(PPh3)4] metalloligand with π-hydrocarbon derivatives of d ruthenium(II), osmium(II), rhodium(III) and iridium(III)

The reactivity of [Pt₂(μ-S)₂(PPh₃)₄] towards [RuCl₂(η⁶-arene)]₂ (arene=C₆H₆, C₆Me₆, p-MeC₆H₄Prⁱ=p-cymene), [OsCl₂(η⁶-p-cymene)]₂ and [MCl₂(η⁵-C₅Me₅)]₂ (M=Rh, Ir) have been probed using electrospray ionisation mass spectrometry. In all cases, dicationic products of the type [Pt₂(μ-S)₂(PPh₃)₄ML]²⁺ (L=π-hydrocarbon ligand) are observed, and a number of complexes have been prepared on the synthetic scale, isolated as their BPh₄⁻ or PF₆⁻ salts, and fully characterised. A single-crystal X-ray structure determination on the Ru p-cymene derivative confirms the presence of a pseudo-five-coordinate Ru centre. This resists addition of small donor ligands such as CO and pyridine. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with RuClCp(PPh₃)₂ (Cp=η⁵-C₅H₅) gives [Pt₂(μ-S)₂(PPh₃)₄RuCp]⁺. In addition, the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with the related carbonyl complex [RuCl₂(CO)₃]₂, monitored by electrospray mass spectrometry, gives [Pt₂(μ-S)₂(PPh₃)₄Ru(CO)₃Cl]⁺.     

Synthesis and characterization of new sulfide aggregates of the type [{Pt2(μ3-S)2(P-P)2}M(C6F5)2] (M=Ni, Pd, Pt; P-P=2PPh3, 2PMe2Ph, dppf)

The reaction of [Pt₂(μ-S)₂(P-P)₂] (P-P=2PPh₃, 2PMe₂Ph, dppf) [dppf=1,1^′-bis(diphenylphosphino)ferrocene] with cis-[M(C₆F₅)₂(PhCN)₂] (M=Ni, Pd) or cis-[Pt(C₆F₅)₂(THF)₂] (THF=tetrahydrofuran) afforded sulfide aggregates of the type [{Pt₂(μ₃-S)₂(P-P)₂}M(C₆F₅)₂] (M=Ni, Pd, Pt). X-ray crystal analysis revealed that [{Pt₂(μ₃-S)₂(dppf)₂}Pd(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Ni(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Pd(C₆F₅)₂] and [{Pt₂(μ₃-S)₂(PMe₂Ph)₂}Pt(C₆F₅)₂] have triangular M₃S₂ core structures capped on both sides by μ₃-sulfido ligands. The structural features of these polymetallic complexes are described. Some of them display short metal-metal contacts.     

A study of zinc complexes of the metalloligand [Pt2(μ-S)2(PPh3)4] of the type [Pt2(μ-S)2(PPh3)4ZnL]+ (L = bidentate chelating ligand)

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with zinc acetate and an ancillary chelating ligand L (HL = 8-hydroxyquinoline, 8-tosylaminoquinoline or maltol) with added trimethylamine in methanol give new cationic platinum–zinc sulfide aggregates [Pt₂(μ-S)₂(PPh₃)₄ZnL]⁺, isolated as their BF₄^? salts. The complexes were characterized by NMR spectroscopy, ESI mass spectrometry, microelemental analysis, and an X-ray structure determination of the tosylamidoquinoline derivative [Pt₂(μ-S)₂(PPh₃)₄Zn(TAQ)]BF₄, which showed a distorted tetrahedral coordination geometry at zinc. Additional examples, containing picolinate, dithiocarbamate, or dithiophosphinate ligands were also synthesized and partly characterized in order to demonstrate a wider range of available derivatives.     

Alkylation of [Pt2(μ-S)2(PPh3)4] with boronic acid derivatives

The reactivity of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the boron-functionalized alkylating agents BrCH₂(C₆H₄)B(OR)₂ (R = H or C(CH₃)₂) was investigated by electrospray ionization mass spectrometry (ESI-MS) in real time using pressurized sample infusion (PSI). The macroscopic reaction of [Pt₂(μ-S)₂(PPh₃)₄] with one mole equivalent of alkylating agents BrCH₂(C₆H₄)B{OC(CH₃)₂}₂ and BrCH₂(C₆H₄)B(OH)₂ gave the dinuclear monocationic μ-sulfide thiolate complexes [Pt₂(μ-S){μ-SCH₂(C₆H₄)B{OC(CH₃)₂}₂}(PPh₃)₄]⁺ and [Pt₂(μ-S){μ-S⁺CH₂(C₆H₄)B(OH)(O^?)}(PPh₃)₄]. The products were isolated as the [PF₆]^? salt and zwitterion, respectively, and fully characterized by ESI-MS, IR, ¹H and ³¹P NMR spectroscopy, and single-crystal X-ray structure determinations.     

Thiocarbonyl complexes of ruthenium(II). Synthesis of RuCl2(CS)(H2O)(PPh3)2 and RuHCl(CS)(PPh3)3

A high-yield synthesis of trans-RuCl₂(CS)(H₂O)(PPh₃)₂ from RuCl₂(PPh₃)₃ and CS₂ is described. The coordinated water molecule is labile, and introduction of CNR (R  p-toyl or p-chlorophenyl) leads to yellow trans-RuCl₂(CS)(CNR)(PPh₃)₂, which isomerises thermally to colourless cis-RuCl₂(CS)(CNR)(PPh₃)₂. Reaction of AgClO₄ with cis-RuCl₂(CS)(CNR)(PPh₃)₂ gives [RuCl(CS)(CNR)(H₂O)(PPh₃)₂]⁺, from which [RuCl(CS)(CO)(CNR)(PPh₃)₂]⁺ and [RuCl(CS)(CNR)₂(PPh₃)₂]⁺ are derived. Reaction of trans-RuCl₂(CS)(H₂O)(PPh₃)₂ with sodium formate gives Ru(η²-O₂CH)Cl(CS)(PPh₃)₂, which undergoes decarboxylation in the presence of (PPh₃) to give RuHCl(CS)(PPh₃)₃. Ru(η²-O₂CH)H(CS)(PPh₃)₂ and Ru(η²-O₂CMe)-H(CS)(PPh₃)₂ are also described.     

Immobilization of [Pt2(μ-S)2(PPh3)4] on Polymeric Supports by Sulfide Alkylation and Phosphine Exchange Reactions

Abstract

The immobilization of the dinuclear platinum(II) sulfido complex [Pt₂(μ-S)₂ (PPh₃)₄] on solid supports has been investigated. Reaction with haloalkyl functionalized polymers [Merrifield's resin (chloromethylated polystyrene), chloropropyl silica, chloropropyl controlled pore glass, and bromopropyl polysiloxane] gives complexes immobilized through alkylation of one of the sulfide ligands, forming a μ-thiolate ligand acting as an anchor to the polymer support, akin to well-established reactions of [Pt₂(μ-S)₂(PPh₃)₄] with molecular alkylating agents. The model complex [Pt₂(μ-S)(μ-SCH₂SiMe₃)(PPh₃)₄]PF₆ was prepared as the first molecular silicon-containing derivative of [Pt₂(μ-S)₂(PPh₃)₄] and was fully characterized by NMR spectroscopy, electrospray ionization-mass spectrometry, and single-crystal X-ray diffraction. Immobilization of [Pt₂(μ-S)₂(PPh₃)₄] by phosphine exchange reactions was also achieved using commercial polystyrene-grafted triphenylphosphine or a new immobilized phosphine [derived by sequential functionalization of Merrifield's resin with a polyether amine and then Ph₂PCH₂OH].     

Oxorhenium complexes with the 8-quinolinolato ligand. X-ray structure and DFT calculations for [ReOX2(hqn)(AsPh3)] and [ReOX2(hqn)(PPh3)] complexes

The reactions of [ReOX₃(AsPh₃)₂] and [ReOX₃(PPh₃)₂] with 8-hydroxyquinoline (Hhqn) have been examined and the complexes [ReOX₂(hqn)(AsPh₃)] and [ReOX₂(hqn)(PPh₃)] (X = Cl, Br) have been obtained, respectively. The crystal and molecular structures of [ReOCl₂(hqn)(AsPh₃)] (1) and [ReOBr₂(hqn)(PPh₃)] (4) have been determined. The electronic structure of 1 has been calculated with the density functional theory (DFT) method. The spin-allowed electronic transitions of 1 have been calculated with the time-dependent DFT method, and the UV–Vis spectrum of [ReOCl₂(hqn)(AsPh₃)] has been discussed on this basis.     

Spanning [Pt2(μ-S)2(PPh3)4] metalloligands with 1,4-dimercurated durene

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with 0.5 mol equivalents of durene-1,4-bis(mercuric acetate) [AcOHgC₆Me₄HgOAc] in methanol gives the polynuclear complex [{Pt₂(μ-S)₂(PPh₃)₄}₂(μ-1,4-C₆Me₄Hg₂)]²⁺, isolated as its and salts. Positive-ion ESI mass spectra indicate that [{Pt₂(μ-S)₂(PPh₃)₄}₂(μ-1,4-C₆Me₄Hg₂)]²⁺ undergoes fragmentation by successive loss of PPh₃ ligands, while the ESI mass spectrum of the salt showed additional ions [Pt₂(μ-S)₂(PPh₃)₄(HgC₆Me₄HgPh)]⁺ and [Pt₂(μ-S)₂(PPh₃)₄HgPh]⁺ as a result of phenyl transfer from to Hg. A single-crystal X-ray structure determination on [{Pt₂(μ-S)₂(PPh₃)₄}₂(μ-1,4-C₆Me₄Hg₂)](BPh₄)₂ shows that the cation crystallises on a centre of symmetry, with structural features that are comparable to those of the previously characterised complex [Pt₂(μ-S)₂(PPh₃)₄HgPh]BPh₄.     

Reactivity of the metalloligand [Pt2(µ-S)2(PPh3)4] toward tellurium(II) thiourea complexes: synthesis and structural characterization of the ditellurium(I) derivative [{Pt2(µ-S)2(PPh3)4}2Te2]2+

Abstract

Reaction of the platinum(II) sulfide metalloligand [Pt₂(µ-S)₂(PPh₃)₄] with the tellurium(II) source TeCl₂(tu)₂ (tu?=?thiourea) is dependent on reaction conditions employed. In the presence of added acid, the dominant species observed in the electrospray ionization (ESI) mass spectrum is the tetraplatinum species [{Pt₂(µ-S)₂(PPh₃)₄}₂Te₂]²⁺. This contains the Te₂²⁺ moiety and is related to the previously reported tellurium(I) dithiophosphinate analog [(Ph₂PS₂)₂Te₂]. However, in the absence of acid, considerable degradation of the {Pt₂S₂} metalloligand occurs as evidenced by the formation of the mononuclear complex [Pt{SC(NH₂)NH}(PPh₃)₂]⁺ containing a deprotonated thiourea ligand, together with other thiourea-containing ions, identified by ESI MS. Likewise, attempted use of a fully substituted thiourea, viz. Me₂NC(S)NMe₂ (tmtu) in TeCl₂(tmtu)₂, also resulted in degradation of the {Pt₂S₂} core and detection of the known complex [(Ph₃P)₂PtCl{SC(NMe₂)₂}]⁺. The [{Pt₂(µ-S)₂(PPh₃)₄}₂Te₂]²⁺ cation was isolated with several anions, and unequivocal confirmation of the structure of the complex was obtained by an X-ray structure determination on the BF₄^- salt, which shows the presence of the Te₂²⁺ unit, with the Te–Te bond bridged by two {Pt₂S₂} metalloligands. Density functional theory was used to further probe the Te₂²⁺ bonding interactions in [{Pt₂(μ-S)₂(PPh₃)₄}₂Te₂]²⁺ and the previously reported [(Ph₂PS₂)₂Te₂].     

New oxorhenium complexes with 2-(2′-hydroxyphenyl)-2-benzoxazolinato ligand. X-ray structure and DFT calculations for [ReOX2(hbo)(AsPh3)] and [ReOX2(hbo)(PPh3)] complexes

The reactions of [ReOX₃(AsPh₃)₂] and [ReOX₃(PPh₃)₂] with 2-(2′-hydroxyphenyl)-2-benzoxazoline (Hhbo) have been examined and [ReOX₂(hbo)(AsPh₃)] and [ReOX₂(hbo)(PPh₃)] (X = Cl, Br) complexes have been obtained. The crystal and molecular structures of [ReOCl₂(hbo)(AsPh₃)] (1) and [ReOBr₂(hbo)(PPh₃)] (4) have been determined. The electronic structures of 1 and 4 have been calculated with the density functional theory (DFT) method. The spin-allowed electronic transitions of 1 and 4 have been calculated with the time-dependent DFT method, and the UV–Vis spectra of these complexes have been discussed.     

The reaction of trihydrobistriphenylphosphine iridium IrH3(PPh3)2 with diazonium salts

The reaction of IrH₃(PPh₃)₂ with p-substituted aryldiazonium salts gives the compounds [IrH₂(NHNC₆H₄R)(PPh₃)₂]⁺BF₄^- at low temperature (-10°C) and the o-metalated complexes [I$\text{rH(NHN}$C₆H₃R)(PPh₃)₂]⁺BF₄^- (R  F, OCH₃) at 40–50°C. The reactions of the o-metalated complexes with CO, PPh₃, NaI and HCl have been studied.     

Reactivity of [ReOX3(PPh3)2] and [ReOX3(AsPh3)2] towards 2-(2-hydroxyphenyl)-1H-benzimidazole: Synthesis, X-ray studies, spectroscopic characterization and DFT calculations for [ReOX2(hpb)(EPh3)] and [ReO(OMe)(hpb)2]·MeCN

The paper presents a combined experimental and computational study of mono- and disubstituted Re(V) oxocomplexes obtained in the reactions of [ReOX₃(EPh₃)₂] (X = Cl, Br; E = P, As) with 2-(2-hydroxyphenyl)-1H-benzimidazole (Hhpb). From the reactions of [ReOX₃(PPh₃)₂] with Hhpb in molar ratio 1:1 cis and trans stereoisomers of [ReOX₂(hpb)(PPh₃)] were isolated, whereas the [ReOX₃(AsPh₃)₂] oxocompounds react with Hhpb to give only cis-halide isomers. The [ReOX₂(hpb)(EPh₃)] and [ReO(OMe)(hpb)₂]·MeCN complexes have been characterized spectroscopically and structurally (by single-crystal X-ray diffraction). The DFT and TDDFT calculations have been carried out for the trans-[ReOBr₂(hpb)(PPh₃)], cis-[ReOBr₂(hpb)(AsPh₃)] and [ReO(OMe)(hpb)₂], and their UV–Vis spectra have been discussed on this basis.     

Nitrosyl derivatives of the unsaturated dihydrides [Mn2(μ-H)2(CO)6(μ-L2)] (L2 = Ph2PCH2PPh2, (EtO)2POP(OEt)2)

The title dimanganese complexes react with NO (5% in N₂) at room temperature to give as major products the corresponding hexanitrosyl derivatives [Mn₂(NO)₆(μ-L₂)] in moderate yields, and they react rapidly with NO₂ to give the corresponding hydride derivatives [Mn₂(μ-H)(μ-NO₂)(CO)₆(μ-L₂)], these having a nitrite ligand bridging the dimetal centre through the N and O atoms. The dppm-bridged dihydride also reacts selectively at 273 K with (PPN)NO₂ to give first the nitro derivative (PPN)[Mn₂(μ-H)(H)(NO₂)(CO)₆(μ-dppm)], which then transforms into the nitrosyl complex (PPN)[Mn₂(μ-CO)(CO)₅(NO)(μ-dppm)] at room temperature or above (dppm = Ph₂PCH₂PPh₂; PPN⁺ = [N(PPh₃)₂]⁺). The latter anion reacts with (NH₄)PF₆ to give the hydride-bridged nitrosyl complex [Mn₂(μ-H)(μ-NO)(CO)₆(μ-dppm)] and with [AuCl(PPh₃)] to give the trinuclear cluster [AuMn₂(μ-NO)(CO)₆(μ-dppm)(PPh₃)] (Mn-Au = ca. 2.68 Å; Mn-Mn = 2.879(2) Å). Both products are derived from the addition of the added electrophile at the intermetallic bond and rearrangement of the nitrosyl ligand into a bridging position. In contrast, methylation of the anion with CF₃SO₃Me takes place at the nitrosyl ligand to yield the unstable methoxylimide derivative [Mn₂(μ-NOMe)(CO)₆(μ-dppm)]. Analogous reactions at the nitrosyl ligand take place upon the addition of HBF₄·OEt₂ to the nitrosyl-bridged hydrides [Mn₂(μ-H)(μ-NO)(CO)_n(μ-dppm)_m] (n = 6, m = 1; n = 4, m = 2) to give the corresponding hydroxylimide derivatives [Mn₂(μ-H)(μ-NOH)(CO)_n(μ-dppm)_m]BF₄, which were also thermally unstable and could not be isolated nor fully characterized.     

Chalcogen-capped ruthenium carbonyl clusters derived from diphosphazane mono- and dichalcogenides of the type X2P(E)N(R)PX2 and X2P(E)N(R)P(E)X2 (E = S or Se)

Reactions of Ru₃(CO)₁₂ with diphosphazane monoselenides Ph₂PN(R)P(Se)Ph₂ [R = (S)-∗CHMePh (L⁴), R = CHMe₂ (L⁵)] yield mainly the selenium bicapped tetraruthenium clusters [Ru₄(μ₄-Se)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] (1, 3). The selenium monocapped triruthenium cluster [Ru₃(μ₃-Se)(μ_sb-CO)(CO)₇{κ²-P,P-Ph₂PN((S)-∗CHMePh)PPh₂}] (2) is obtained only in the case of L⁴. An analogous reaction of the diphosphazane monosulfide (PhO)₂PN(Me)P(S)(OPh)₂ (L⁶) that bears a strong π-acceptor phosphorus shows a different reactivity pattern to yield the triruthenium clusters, [Ru₃(μ₃-S)(μ₃-CO)(CO)₇{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (9) (single sulfur transfer product) and [Ru₃(μ₃-S)₂(CO)₅{κ²-P,P-(PhO)₂PN(Me)P(OPh)₂}{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (10) (double sulfur transfer product). The reactions of diphosphazane dichalcogenides with Ru₃(CO)₁₂ yield the chalcogen bicapped tetraruthenium clusters [Ru₄(μ₄-E)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] [R = (S)-∗CHMePh, E = S (6); R = CHMe₂, E = S (7); R = CHMe₂, E = Se (3)]. Such a tetraruthenium cluster [Ru₄(μ₄-S)₂(μ- CO)(CO)₈{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (11) is also obtained in small quantities during crystallization of cluster 9. The dynamic behavior of cluster 10 in solution is probed by NMR studies. The structural data for clusters 7, 9, 10 and 11 are compared and discussed.     

Synthesis and crystal structure of [Ru8(μ5-S)2(μ4-S)(μ3-S)(μ-CNMe2)2(μ-CO)(CO)15] formed via the double sulphur-carbon bond cleavage of dithiocarbamate ligands

Heating cis-[Ru(S₂CNMe₂)₂(CO)₂] and [Ru₃(CO)₁₂] in xylene affords octanuclear [Ru₈(μ₅-S)₂(μ₄-S)(μ₃-S)(μ-CNMe₂)₂(μ-CO)(CO)₁₅] resulting from the double carbon-sulfur bond cleavage of two dithiocarbamate ligands. The structure consists of a tri-edge-bridged square of ruthenium atoms with a further ruthenium atom being bound only to the central bridging atom. Studies suggest that it may be formed via the pentanuclear intermediate [Ru₅(μ₄-S)₂(μ-CNMe₂)₂(CO)₁₁] which is formed in trace amounts.     

A zwitterionic monoalkylated derivative of [Pt2(μ-S)2(PPh3)4] from 1,3-propanesultone

Reaction of dinuclear platinum(II) sulfido complex [Pt₂(μ-S)₂(PPh₃)₄] with 1,3-propanesultone gives the novel zwitterionic monoalkylated thiolate complex [Pt₂(μ-S){μ-S(CH₂)₃SO₃}·(PPh₃)₄], which was characterized by NMR spectroscopy, electrospray ionisation mass spectrometry, and a single crystal X-ray structure determination. Crystals are monoclinic, space group P2(1)/c with unit cell dimensions a = 16.8957(3) Å, b = 15.5031(3) Å, c = 28.0121(5) Å, β = 99.780(1)°, for Z = 4.     

Hydride-phosphoniodithiocarboxylate/ phosphonium-betaine isomerism in Cy3PCS2 complexes of ruthenium

Reaction of Cy₃PCS₂ (Cy = cyclohexyl) with the hydrido complexes [RuClH(CA)(PPh₃)₃] (A  O, S), [RuH(CO)(NCMe)₂(PPh₃)₂]⁺, and [RuH(OClO₃)(CO)(CN^tBu)(PPh₃)₂] leads to the complex cations [RuH(CA)(PPh₃)₂(η²-S₂CPCy₃)]⁺, [Ru(η²-S₂CHPCy₃)(CO) (PPh₃)₂]⁺, [RuH(η¹-S₂CPCy₃)(CO)(CN^tBu)(PPh₃)₂]⁺. The σ-vinyl complex [Ru(CHCHC₆H₄Me-4)Cl(CO)(PPh₃)₂] reacts with Cy₃PCS₂ to give the cationic complex [Ru(CHCHC₆H₄Me-4) (CO)(PPh₃)₂(η²-S₂CPCy₃)]⁺, but this complex is not formed by hydroruthenation of HCCC₆H₄Me-4 by [RuH(CO)(PPh₃)₂(η²-S₂CPCy₃)]⁺. The inter-relationships between the above complexes are discussed.     

Potential inhibitors of DNA topoisomerase II: ruthenium(II) poly-pyridyl and pyridyl-azine complexes

In search of new DNA probes a series of new mono and binuclear cationic complexes [RuH(CO)(PPh₃)₂(L)]⁺ and [RuH(CO)(PPh₃)₂(-μ-L)RuH(CO)(PPh₃)₂]²⁺ [L=pyridine-2-carbaldehyde azine (paa), p-phenylene-bis(picoline)aldimine (pbp) and p-biphenylene-bis(picoline)aldimine (bbp)] have been synthesized. The reaction products were characterized by microanalyses, spectral (IR, UV-Vis, NMR and ESMS and FAB-MS) and electrochemical studies. Structure of the representative mononuclear complex [RuH(CO)(PPh₃)₂(paa)]BF₄ was crystallographically determined. The crystal packing in the complex [RuH(CO)(PPh₃)₂(paa)]BF₄ is stabilized by intermolecular π-π stacking resulting into a spiral network. Topoisomerase II inhibitory activity of the complexes and a few other related complexes [RuH(CO)(PPh₃)₂(L)]⁺ {L=2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz) and 2,3-bis(2-pyridyl)-pyrazine (bppz)} have been examined against filarial parasite Setaria cervi. Absorption titration experiments provided good support for DNA interaction and binding constants have also been calculated which were found in the range 1.2 × 10³-4.01 × 10⁴ M⁻¹.