Head-group-induced structural micellar transitions in mixed cationic surfactants with identical hydrophobic tails

The mixed micelle formation by hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl) with benzylhexadecyldimethylammonium chloride (BHDACl) was studied with the help of conductivity, 3, and viscometric measurements. Each 3 curve for HTAB, HPyBr, and HPyCl showed a single break, whereas double breaks were observed in the case of BHDACl and its binary mixtures with HTAB, HPyBr, and HPyCl. The first break, c_1,M, was due to mixed-micelle formation, whereas the second one, c_2,M, was due to the structural micellar transitions in the mixed micelles formed during the first break. The quantitative analysis of the mixed-micelle formation corresponding to the first break was carried out with the help of regular solution and Motomura's approximations. The BHDACl plus HTAB and BHDACl plus HPyBr mixtures showed weak synergistic interactions, whereas the BHDACl plus HPyCl mixture was close to ideal. A variation in the degree of dissociation corresponding to the first and second breaks demonstrated a similar variation over the whole mixing range and this was attributed to the identical nature of synergism in both kinds of micellar aggregates available at c_1,M, and c_2,M. They were rich in BHDACl over most of the mole fraction range. Unlike conductivity measurements, the relative viscosity demonstrated that the micellization of HTAB, HPyBr, and HPyCl proceeded through a minimum, whereas that for BHDACl and its mixtures showed a strong maximum in each case, being stronger in the case of the BHDACl plus HTAB and BHDACl plus HPyCl mixtures.     

NMR studies of mixed cationic surfactants with similar tails and dissimilar bulky head groups

The mixed micelle formation by benzyldimethylhexadecylammonium chloride (BHDACl) with hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium choride (HPyCl) has been studied with the help of ¹H and ¹³C NMR studies influenced by both the head-group modifications as well as mutual hydrophobicity. The results showed that the mixed micelles of BHDACl+HPyBr and BHDACl+HPyCl mixtures are significantly affected by the steric factors originating from the bulkiness of the pyridinium head group of both cosurfactants in the stern layer. The result is that BHDACl+HPyBr and BHDACl+HPyCl mixed micelles are in the state of loose micellar arrangements rather than the mixed micelles of the BHDACl+HTAB mixture. A relative comparison between Br ^- and Cl ^- counterion effect suggests that the stronger binding ability of Br ^- than Cl ^-produces relatively compact mixed micelles.     

Interactions of 3, 3.5, 4, and 4.5 generations of poly(amido amine) dendrimer with cationic surfactants

The conductivity (κ), turbidity (τ), NMR, and Krafft temperature (T _K) studies have been carried out for hexadecylpyridinium bromide (HPyBr), hexadecylpyridinium chloride (HPyCl), and hexadecyltrimethylammonium bromide (HTAB) in the presence of 3G, 3.5G, 4G, and 4.5G generations of poly(amido amine) dendrimers (PAMAM) in aqueous phase. The cmc of all present surfactants were evaluated from κ and τ measurements, both in the presence as well as in the absence of PAMAM. The cmc values decrease in the presence of PAMAM in comparison to that in pure water, especially in the presence of amine terminated PAMAM. Krafft temperature values of pure surfactants also decrease in the presence of various generations of PAMAM. A comparison of all present results from different techniques indicates that HPyBr interacts more strongly with all generations of PAMAM rather than HPyCl and HTAB.     

Favorable interactions of amine- and ester-terminated PAMAM with cationic surfactants: photophysical and transport studies

Conductivity (kappa), turbidity (tau), and fluorescence (I1/I3) studies of hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl) in aqueous poly(amido amine) (PAMAM) dendrimers of generations 0 to 2.5 G have been carried out. The complexation of surfactant monomers with the PAMAM surface groups is demonstrated by the critical aggregation concentration (cac), which is two to three orders of magnitude less than the micellization of cationic surfactants in aqueous PAMAM and denoted by critical micelle concentration (cmc*). In the presence of aqueous amine-terminated PAMAM, the cmc* value for each surfactant was much lower than the cmc in pure water, while they remain close to each other in the presence of aqueous ester-terminated PAMAM for each surfactant. The fluorescence studies demonstrated that both amine- and ester-terminated PAMAM interact with the cationic surfactants, though the mode of interaction varied due to the different nature of surface groups.     

Head-group-modification-controlled mixing behavior of binary cationic surfactants: conductometric,viscometric, and NMR studies

The mixed-micelle formation by hexadecyltrimethylammonium bromide (HTAB) with hexadecyltriphenylphosphonium bromide (HTPB) and hexadecyltributylphosphonium bromide (HTBB), and by hexadecylpyridinium bromide (HPyBr) with HTPB and HTBB has been studied with the help of conductivity, viscometry, and NMR studies. The conductivity studies showed close-to-ideal mixing in all cases with weak synergistic interactions. The relative viscosity is more sensitive than the conductivity and demonstrated that the micellization of HTAB, HPyBr, HTPB, and HTBB proceeded through the appearance of a minimum, whereas their mixtures showed a strong maximum in each case. NMR measurements suggested that bulky head groups of HTPB and HTBB induce significant steric hindrance in the mixed state upon mixing with HTAB and HPyBr. The appearance of the maximum shown by the relative viscosity in the mixed-micellization process is due to steric compulsions, which may also lead to some structural transitions.     

Benzylic and pyridinium head groups controlled surfactant-polymer aggregates of mixed cationic micelles and anionic polyelectrolytes

The oppositely charged electrostatic interactions between cationic single and mixed micelles of benzyldimethylhexadecylammonium chloride (BHDACl), hexadecylpyridinium bromide (HPyBr), hexadecylpyridinium chloride (HPyCl), and their mixtures with anionic polyelectrolytes, namely carboxymethylcellulose sodium salt (CMC) and polystyrene sulfonate sodium salt (PSS) were studied with the help of conductivity (), viscosity (), turbidity (), and NMR studies. showed single aggregation process, which was represented by apparent critical micelle concentration, acmc, of each surfactant in aqueous polyelectrolyte solution. Both and demonstrated strong electrostriction effects in the case of BHDACl-polyelectrolyte systems due to weak electrostatic interactions in view of steric hindrances created by benzylic group of BHDACl. ¹H NMR results showed that the head group proton resonances of BHDACl upon incorporation of HPyBr or HPyCl in the presence of CMC or PSS remained identical to that in pure water, which demonstrated very weak interactions between BHDACl and polyelectrolytes. A less shielding of pyridinium head group protons by BHDACl in the presence of polyelectrolytes in comparison to that in pure water indicated favorable electrostatic interactions between pyridinium head groups and anionic polyelectrolytes. HPyBr in comparison to HPyCl showed stronger interactions with polyelectrolytes.     

Interaction and Stability of Mixed Micelle and Monolayer of Nonionic and Cationic Surfactant Mixtures

Interaction and stability of binary mixtures of cationic surfactants hexadecyltrimethylammonium bromide (HTAB) or hexadecylpyridinium bromide (HPyBr) with nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) have been studied at different mole fraction of cationic surfactants by using interfacial tension measurements and fluorescence probe techniques. From interfacial tension measurements, the critical micellar concentration and various interfacial thermodynamic parameters have been evaluated. The experimental cmc's were analyzed with the pseudophase separation model, the regular solution theory, and the Maeda's approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTAB + Mega-10 were obtained. It has been observed that the aggregation number of mixed micelles deviates negatively from the ideal behavior. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio and found to be increase with the increase of ionic content. The polarization of fluorescence probe Rhodamine B was monitored at different mole fraction of cationic surfactants.     

Effect of pH on adsolubilization of single and binary organic solutes into a cationic hydrocarbon surfactant adsorbed layer on silica

The adsolubilization behaviors of 2-naphthol, biphenyl, and their binary solutes in the hexadecyltrimethyl ammonium bromide (HTAB) adsorbed layer formed on silica have been studied with solution pH. Two feed concentrations of HTAB are employed: 1.5 and 3.0 mmol dm(-3). At the feed concentration of 1.5 mmol dm(-3) HTAB, most of HTAB are adsorbed on the silica as a monolayer, while a bilayer formation occurs at the feed concentration of 3.0 mmol dm(-3). It is found that the adsolubilized amounts of respective single solutes increase with increasing solution pH except acidic region for biphenyl under a constant feed concentration of 2-naphthol (0.4 mmol dm(-3)) and biphenyl (0.047 mmol dm(-3)). The adsolubilization of binary solutes depends on the feed concentration of HTAB; at the low HTAB feed concentration, competitive adsolubilization between 2-naphthol and biphenyl occurs above pH 4.5, while at the high HTAB feed concentration the adsolubilization of biphenyl is enhanced by the incorporation of 2-naphthol over a whole pH region. These behaviors in the adsolubilization are discussed from the surfactant structure of HTAB adsorbed as well as the admicellar partitioning coefficients.     

Solubilization of single-walled carbon nanotubes by using polycyclic aromatic ammonium amphiphiles in water--strategy for the design of high-performance solubilizers

We describe the design of polycyclic aromatic compounds with high performance that dissolve single-walled carbon nanotubes (SWNTs). Synthetic amphiphiles trimethyl-(2-oxo-2-phenylethyl)-ammonium bromide (1) and trimethyl-(2-naphthalen-2-yl-2-oxo-ethyl)-ammonium bromide (2) carrying a phenyl or a naphtyl moiety were not able to dissolve/disperse SWNTs in water. By contrast, trimethyl-(2-oxo-2-phenanthren-9-yl-ethyl)-ammonium bromide (3) solubilized SWNTs, although the solubilization ability was lower than that of trimethyl-(2-oxo-2-pyrene-1-yl-ethyl)-ammonium bromide (4) (solubilization behavior observed by using 4 was described briefly in reference 4a). Transmission electron microscopy (TEM), as well as visible/near-IR, fluorescence, and near-IR photoluminescence spectroscopies were employed to reveal the solubilization properties of 4 in water, and to compare these results with those obtained by using sodium dodecyl sulfate (SDS) and hexadecyltrimethylammonium bromide (HTAB) as solubilizers. Compound 4 solubilized both the as-produced SWNTs (raw-SWNTs) and purified SWNTs under mild experimental conditions, and the solubilization ability was better than that of SDS and HTAB. Near-IR photoluminescence measurements revealed that the chiral indices of the SWNTs dissolved in an aqueous solution of 4 were quite different from those obtained by using micelles of SDS and HTAB; for a SWNTs/4 solution, the intensity of the (7,6), (9,5), and (12,1) indices were strong and the chirality distribution was narrower than those of the micellar solutions. This indicates that the aqueous solution of 4 has a tendency to dissolve semiconducting SWNTs with diameters in the range of 0.89-1.0 nm, which are larger than those SWNTs (0.76-0.97 nm) dissolved in the aqueous micelles of SDS and HTAB.     

Study of inclusion complex formation between a cationic surfactant, two cyclodextrins and a drug

In this study inclusion of hexadecyltrimethylammonium bromide (HTAB) with α-, and β-cyclodextrin (CD) in the presence and the absence of bromhexine (BH) was investigated using ion-selective electrode method. The association constants of HTAB with CDs were determined by potentiometry and were close to literature values. The obtained results indicated that α-CD formed 1:1 and 1:2 inclusion complexes, but β-CD formed only a 1:1 inclusion complex. In the presence of drug, the interaction between CDs and HTAB decreased, because both drug and HTAB could interact with CDs. The results showed that the interaction between drug and CDs are greater than HTAB and CDs. The stoichiometry of the inclusion complexes, the critical aggregation concentration (CAC), the monomer surfactant concentration of HTAB, [HTAB]_f, and also the effect of the inclusion complex on the micellization process of the HTAB were determined by conductivity measurements.     

Electromotive force study on interaction between a triblock copolymer and cationic surfactants in water

The interaction between a poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) triblock copolymer F127 and three cationic surfactants with varying alkyl chain length in water were investigated in detail by electromotive force (EMF) studies. The cationic surfactants investigated are hexadecyltrimethylammonium bromide (HTAB), myristytrimethylammonium bromide (MTAB), and lauryltrimethylammonium bromide (LTAB) which have carbon numbers of 16, 14, and 12 in the alkyl chain, respectively. Obvious binding was detected by EMF measurements between F127 and HTAB. For MTAB, the binding has also been detected with a weaker strength than that of HTAB. The LTAB/F127 mixed system exhibits the weakest binding, presumably due to the too short alkyl chain. This indicates that the binding between cationic surfactants and F127 is mainly dominated by the hydrophobic/hydrophobic interaction. In addition, the interaction also shows considerable dependence on the concentration of F127 and solution parameters such as the salinity.     

Sol-gel Transition of Methylcellulose Solution in the Coexistence of Hexadecyltrimethylammonium Bromide and Sodium Chloride

The sol-gel transition of methylcellulose (MC) solution in the presence of NaCl and hexade-cyltrimethylammonium bromide (HTAB), together with MC/NaCl solution in the presence of HTAB and MC/HATB solution in the presence of NaCl, was investigated by the rheolog-ical measurements. It has been found that the sol-gel transition temperature of MC solution decreases linearly with the concentration of NaCl in solution but increases linearly with the concentration of HTAB in solution, respectively. However, the sol-gel transition temperature of MC/NaCl solution in the presence of HTAB keeps the same value, independent of theconcentration of HTAB in solution. On the other hand, the sol-gel transition temperature of MC/HTAB solution decreases linearly with the concentration of NaCl in solution. The experimental results suggest that, for MC/NaCl solution in the presence of HTAB, the salt-induced spherical micelles of HTAB should have formed in bulk solution. For MC solution in the absence of NaCl, no spherical micelles have been formed in bulk solution, though the concentration of HTAB in our experiment is almost one order of magnitude higher than the critical micelle concentration of HTAB in polymer-free solution. In fact, due to adsorption of HTAB on MC chains, the realconcentration of HTAB in bulk solution, is much less than the apparent concentration of HTAB dissolved in MC solution.     

发光反应型有机铵分子与CdSe纳米晶的组装

用巯基乙酸做稳定剂制备了水溶性CdSe纳米颗粒, 用十六烷基三甲基溴化铵(HTAB)、发光性(4-甲氧基均二苯乙烯基)二甲基乙基溴化铵 (MODAB)及末端含有双键的(4-甲基丙烯酰氧基均二苯乙烯基)二甲基乙基溴化铵(MSDAB)对该CdSe纳米颗粒进行了混合组装.通过改变三种有机分子的比例可以调控所得组装体的溶解性、聚合性及其发光性质.实验结果表明,当HTAB:MODAB:MSDAB=1:5.98～5.90:0.02～0.10(摩尔比)时,所得组装体具有较好的聚合性、溶解性和荧光性质.     

Interactions between cationic mixed micelles and poly(vinyl pyrrolidone)

 The conductances of trimethyltetradecylammonium bromide (TTAB) + trimethylhexa decylammonium bromide (HTAB) and TTAB + trimethyldodecylammonium bromide (DTAB) mixtures over the entire mole fraction range were measured in aqueous poly(vinyl pyrrolidone) (PVP) containing 1–10 wt% PVP at 30 °C. Each conductivity (κ) curve for the TTAB + HTAB mixtures showed two breaks corresponding to two aggregation processes over the whole mole fraction range, except in the case of pure TTAB, where a single break corresponding to the conventional critical micelle concentration (cmc) was observed. In the case of TTAB + DTAB mixtures, each κ curve at a particular mole fraction of TTAB showed only one break, which was quite close to a similar one in pure water. In TTAB + HTAB mixtures, the first break is called the critical aggregation concentration. It is close to the conventional cmc and is attributed to the polymer-free micelle formation, whereas the second break is due to the polymer-bound micellar aggregates. However, no polymer-bound micellar aggregation process was observed in the case of TTAB + DTAB mixtures. Therefore, the presence of micelle–PVP interactions in the TTAB + HTAB case have been attributed to the stronger hydrophobicity of HTAB or TTAB + HTAB micelles in comparison to that of single or mixed micelles of TTAB + DTAB mixtures. From the conductivity data, various micelle parameters in the presence of PVP have been computed and discussed in terms of micelle–polymer interactions. The mixing behavior of TTAB +  HTAB corresponding to the first break, and that of TTAB + DTAB mixtures in the presence of PVP, is close to ideal and is also identical to that in pure water. Received: 26 August 1999 Accepted: 6 November 1999     

The effect of phosphorus content on the thermal and the burning properties of cotton fabric coated with an ultrathin film of a phosphorus-containing polymer

The effect of phosphorus content on thermal degradation and burning behavior of poly(acryloyloxyethyl diethyl phosphate) or PADEP-coated cotton was studied. The results showed that PADEP-coated cotton prepared by admicellar polymerization using hexadecyltrimethylammonium bromide (HTAB) as a surfactant has higher amounts of phosphorus than that prepared using dodecyltrimethylammonium bromide (DTAB). Higher phosphorus content led to lower decomposition temperatures and greater amounts of char formation after thermal degradation. The effectiveness of the amount of phosphorus on the burning behavior of the treated cotton was investigated by an ASTM flammabilty test. In the case of PADEP-coated cotton prepared with DTAB, the flame spread slowly and extinguished with char formation on the fabric. For untreated cotton however, the flame spread quickly and burned the fabric entirely without char formation. Cotton coated with PADEP using HTAB exhibited self-extinguishing behavior after removing the ignition source. Decrease in decomposition temperature, increase in char formation and the burning behavior of PADEP-coated cotton are all consistent with phosphorus content on the treated fabric.     

阳离子表面活性剂R16HTAB及其复配体系的流变性能

用稳态和动态流变学方法研究了3-十六烷氧基-2-羟丙基三甲基溴化铵（R16HTAB）单纯以及水杨酸钠（NaSal）存在下溶液的流变特性．无盐体系中,在测定的浓度范围内,表面活性剂与零剪切黏度呈指数关系（η0∝c^2．53）．水杨酸钠的加入促进了体系由球状向蠕虫状胶束转化．Cox—Merz规则和Cole-Cole图证明,混合体系生成了蠕虫状胶束．与传统的CTAB比较,无论水杨酸钠存在与否,R16HTAB水溶液的流变性能均较好,这主要归因于羟丙基基团的插入,使得R16HTAB和NaSal分子之间形成氢键连接,生成了更加稳定的三维网络结构．应用冷冻蚀刻电子显微镜技术进一步证实了体系中蠕虫状胶柬的存在．     

Effect of molecular packing on adsorption and micelle formation of a homologous cationic surfactant mixture of hexadecyltrimethylammonium bromide and dodecyltrimethylammonium bromide

The surface tension of an aqueous solution of a hexadecyltrimethylammonium bromide (HTAB) and dodecyltrimethylammonium bromide (DTAB) mixture was measured as a function of the total molality and the composition of DTAB at 298.15 K under atmospheric pressure. The phase diagrams of adsorption and micelle formation were constructed and the excess Gibbs energy was evaluated by analyzing the phase diagrams thermodynamically. Both the excess Gibbs energy in the adsorbed film and the excess surface area are negative; therefore the mutual interaction between HTAB and DTAB is said to be stronger than that between the same species and is enhanced with increasing adsorption. By combining the results with those obtained in previous studies, we claimed that DTAB molecules can use effectively the space among the hydrocarbon chains of HTAB molecules and their polar head groups take a staggered arrangement at the surface so as to reduce the electrostatic repulsion. Consequently the dispersion force between hydrophobic chains becomes stronger. Furthermore, the comparison of the excess Gibbs energy in the adsorbed film with that in the micelle shows that the staggered arrangement of molecules is not necessary in the spherical micelle.     

Structural Behavior of Aggregate Assemblies of Cationic Surfactants and Their Mixtures with Triblock Polymers

Small angle neutron scattering (SANS) technique has been employed to study the structural aspects of micellar system of cationic surfactants viz. alkyltriphenylphosphonium bromide (C₁₂-, C₁₄-, C₁₆TPB) and hexadecylpyridinium chloride (C₁₆PyCl) with triblock polymers (L64, F68, and F127). SANS data analysis reveals the prolate ellipsoidal shape of mixed micelles and increase in the micellar size upon addition of triblock polymers (L64, F68, and F127). The influence of effective size of the head group segment on the growth of micelles of HTPB (larger head group) has also been compared with that of HPyCl (smaller head group). A proportionate micellar growth of cationic surfactants has been found with increase in the length of tail segment of cationic surfactants. The observed mixed micellar growth in mixed systems is also accounted on the basis of simultaneous increase in the hydrophobicity of both the components in the mixed system. Results from the present study enlightened the effect of variation in head group segment and hydrophobicity on the structural aspects of mixed micellar system.     

Interaction Parameters of Anhydrous Cationic Surfactant Mixtures by Inverse Gas Chromatography

The miscibility of anhydrous cationic surfactant dodecylpyridinium chloride (DPC) and hexadecylpyridinium bromide (cetylpyridinium bromide (CPB)) mixtures has been studied by using them as stationary phases in Inverse Gas Chromatography (IGC). The temperature zone of work was determined by IGC and Differential Scanning Calorimetry (DSC) techniques. Values of the interaction parameter between the surfactants obtained at four different compositions and at four temperatures showed that the miscibility depends on the overall composition and suggested that the interactions are more favorable near the center of the composition range. Results are compared with other anhydrous cationic surfactant mixtures studied by IGC, the system didodecyldimethylammonium bromide (DDAB) and dioctadecyldimethylammonium bromide (DODAB), two twin-tailed surfactants, and are interpreted in terms of the structure of the anhydrous lamellar liquid crystals compared with that of aqueous lamellar mesophases.     

Determination of Mo(VI) in tap-water and sea-water by differential-pulse polarography and co-flotation

A new method is described for the microdetermination of Mo(VI) in natural waters and sea-water by differential-pulse polarography based on the catalytic wave caused by Mo(VI) in nitrate medium following preconcentration by co-flotation on Fe(III) hydroxide. In the case of sea-water samples, hexadecyltrimethylammonium bromide (HTAB) was used together with octadecylamine as the surfactant. For the analysis of natural water samples only HTAB is needed. Molybdenum in the range 0.7-5.7 ng/ml has been determined.