AC impedance studies on proton-conducting PAN : NH4SCN polymer electrolytes

Solid polymer electrolytes based on polyacrylonitrile (PAN) doped with ammonium thiocyanate (NH₄SCN) in different molar ratios of polymer and salt have been prepared by solution-casting method using DMF as solvent. The increase in amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. A shift in glass transition temperature (T _g) of the PAN?:?NH₄SCN electrolytes has been observed from the DSC thermograms which indicates the interaction between the polymer and the salt. From the AC impedance spectroscopic analysis, the ionic conductivity has been found to increase with increasing salt concentration up to 30 mol% of NH₄SCN beyond which the conductivity decreases and the highest ambient temperature conductivity has been found to be 5.79?×?10^?3 S cm^?1. The temperature-dependent conductivity of the polymer electrolyte follows an Arrhenius relationship which shows hopping of ions in the polymer matrix. The dielectric loss curves for the sample 70 mol% PAN?:?30 mol% NH₄SCN reveal the low-frequency β-relaxation peak pronounced at high temperature, and it may be caused by side group dipoles. The ionic transference number of polymer electrolyte has been estimated by Wagner’s polarization method, and the results reveal that the conductivity species are predominantly ions.     

Structural,electrical conductivity,and transport analysis of PAN–NH<Subscript>4</Subscript>Cl polymer electrolyte system

Poly (acrylonitrile) (PAN) and ammonium chloride (NH₄Cl)-based proton conducting polymer electrolytes with different compositions have been prepared by solution casting technique. The amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. The FTIR analysis confirms the complex formation of the host polymer (PAN) with the salt (NH₄Cl). DSC measurements show a decrease in T_g with the increase in salt concentration. The conductivity analysis shows that the 25 mol% ammonium chloride doped polymer electrolyte has a maximum ionic conductivity, and it has been found to be 6.4 × 10^?3 Scm^?1, at room temperature. The temperature dependence of conductivity of the polymer electrolyte complexes appears to obey the Arrhenius nature. The activation energy (E_a = 0.23 eV) has been found to be low for 25 mol% salt doped polymer electrolyte. The dielectric behavior has been analyzed using dielectric permittivity (ε*), and the relaxation frequency (τ) has been calculated from the loss tangent spectra (tan δ). Using this maximum ionic conducting polymer electrolyte, the primary proton conducting battery with configuration Zn + ZnSO₄·7H₂O/75 PAN:25 NH₄Cl/PbO₂ + V₂O₅ has been fabricated and their discharge characteristics have been studied.     

Characterization of blend polymer PVA-PVP complexed with ammonium thiocyanate

Thin films of blend polymer electrolytes comprising poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) complexed with ammonium thiocyanate (NH₄SCN) salt in different compositions have been prepared by solution casting technique using distilled water as solvent. The prepared films have been investigated by different experimental techniques. The complexation of these films has been studied by FTIR spectroscopy. The increase in amorphousness of the films with increase in NH₄SCN content has been confirmed by XRD analysis. The addition of ammonium thiocyanate salt to PVA-PVP polymer blend shows a shift in T_g of the blend. The effect of salt concentration and temperature on the ionic conductivity of the polymer blend films has been analyzed using AC impedance spectroscopy. The maximum conductivity of 6.85 × 10^?4 S cm^?1 at room temperature has been observed for the blend with 50 mol% PVA-50 mol% PVP complexed with 40 mol% NH₄SCN. The activation energy has been found to be minimum (0.24 eV) for this sample. Wagner’s polarization technique shows that the charge transport in these blend films is predominantly due to ions. Using the highest conductivity blend polymer electrolyte, a proton battery has been fabricated and its discharge characteristics have been studied.     

Structural, vibrational and electrical characterization of PVA-NH4Br polymer electrolyte system

Polymer electrolyte based on PVA doped with different concentrations of NH₄Br has been prepared by solution casting technique. The complexation of the prepared polymer electrolytes has been studied using X-ray diffraction (XRD) and Fourier transform infra red (FTIR) spectroscopy. The maximum ionic conductivity (5.7×10⁻⁴ S cm⁻¹) has been obtained for 25 mol% NH₄Br-doped PVA polymer electrolyte. The temperature dependence of ionic conductivity of the prepared polymer electrolytes obeys Arrhenius law. The ionic transference number of mobile ions has been estimated by dc polarization method and the results reveal that the conducting species are predominantly ions. The dielectric behavior of the polymer electrolytes has been analyzed using dielectric permittivity and electric modulus spectra.     

Conductivity studies of plasticized proton conducting PVA–PVIM blend doped with NH4BF4

The proton conducting solid-state polymer electrolyte comprising blend of poly(vinyl alcohol) (PVA) and poly(N-vinylimidazole) (PVIM), ammonium tetrafluoroborate (NH₄BF₄) as salt, and polyethylene glycol (PEG) (molecular weight 300 and 600) as plasticizer is prepared at various compositions by solution cast technique. The prepared films are characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy analysis. The conductivity–temperature plots are found to follow an Arrhenius nature. The conductivity of solid polymer electrolytes is found to depend on salt and plasticizer content and also on the dielectric constant value and molecular weight of the plasticizer. Maximum ionic conductivity values of 2.20?×?10^?4 and 1.28?×?10^?4?S?cm^?1 at 30 °C are obtained for the system (PVA–PVIM)?+?20 wt.% NH₄BF₄?+?150 wt.% PEG300 and (PVA–PVIM)?+?20 wt.% NH₄BF₄?+?150 wt.% PEG300, respectively. The blended polymer, complexed with salt and plasticizer, is shown to be a predominantly ionic conductor. The proton transport in the system may be expected to follow Grotthuss-type mechanism.     

Structural and thermal studies of PVA:NH4I

Proton-conducting polymer electrolytes based on poly vinyl alcohol (PVA; 88% hydrolyzed) and ammonium iodide (NH₄I) has been prepared by solution casting method with different molar ratios of polymer and salt using DMSO as solvent. DMSO has been chosen as a solvent due its high dielectric constant and also its plasticizing nature. The ionic conductivity has been found to increase with increasing salt concentration up to 25 mol% beyond which the conductivity decreases and the highest ambient temperature conductivity has been found to be 2.5×10⁻³ S cm⁻¹. The conductivity enhancement with addition of NH₄I has been well correlated with the increase in amorphous nature of the films confirmed from XRD and differential scanning calorimetry (DSC) analyses. The temperature-dependent conductivity follows the Arrhenius relation. The polymer-proton interactions have been analyzed by FTIR spectroscopy.     

Effect of ethylene carbonate plasticizer on agar-agar: NH<Subscript>4</Subscript>Br-based solid polymer electrolytes

Proton-conducting polymer electrolytes based on biopolymer, agar-agar as the polymer host, ammonium bromide (NH₄Br) as the salt and ethylene carbonate (EC) as the plasticizer have been prepared by solution casting technique with dimethylformamide as solvent. Addition of NH₄Br and EC with the biopolymer resulted in an increase in the ionic conductivity of polymer electrolyte. EC was added to increase the degree of salt dissociation and also ionic mobility. The highest ionic conductivity achieved at room temperature was for 50 wt% agar/50 wt% NH₄Br/0.3% EC with the conductivity 3.73?×?10^?4 S cm^?1. The conductivity of the polymer electrolyte increases with the increase in amount of plasticizer. The frequency-dependent conductivity, dielectric permittivity (ε′) and modulus (M′) studies were carried out.     

Proton-conducting polymer electrolyte based on PVA-PAN blend doped with ammonium thiocyanate

Blending of polymers is one of the most useful methods for modulating the conductivity of solid polymer electrolytes. Blend polymer electrolytes have been prepared with polyvinyl alcohol (PVA)-polyacrylonitrile (PAN) blend doped with ammonium thiocyanate with different concentrations by solution casting technique, using dimethyl formamide (DMF) as the solvent. The prepared electrolytes are characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), nuclear magnetic resonance (NMR), ultraviolet (UV), and ac impedance measurement techniques. The increase in amorphous nature of the blend polymer electrolyte by the addition of salt is confirmed by XRD analysis. The complex formation between the polymers and the salt has been confirmed by FTIR analysis. The thermal behavior has been examined using DSC and TGA. The maximum conductivity has been found to be 2.4?×?10^?3 S cm^?1 for 92.5PVA/7.5PAN/25 % NH₄SCN sample at room temperature. The temperature dependence of conductivity has been studied with the help of Arrhenius plot, and the activation energies are calculated. The proton conductivity is confirmed by dc polarization measurement technique. ¹H NMR studies reveal the presence of protons in the sample. A proton battery is constructed with the highest conducting sample, and its open circuit voltage is measured to be 1.2 V     

Electrical properties of proton conducting solid biopolymer electrolytes based on starch–chitosan blend

Two systems (salted and plasticized) of starch–chitosan blend-based electrolytes incorporated with ammonium chloride (NH₄Cl) are prepared via solution cast technique. The incorporation of 25 wt% NH₄Cl has maximized the room temperature conductivity of the electrolyte to (6.47?±?1.30)?×?10^?7 S cm^?1. Conductivity is enhanced to (5.11?±?1.60)?×?10^?4 S cm^?1 on addition of 35 wt% glycerol. The temperature dependence of conductivity for all electrolytes is Arrhenian, and the value of activation energy (E _a ) decreases with increasing conductivity. Conductivity is found to be influenced by the number density (n) and mobility (μ) of ions. The complexation between the electrolytes components is proven by Fourier transform infrared analysis. The relaxation time (t _r ) for selected electrolytes is found to decrease with increasing conductivity and temperature. Conduction mechanism for the highest conducting electrolyte in salted and plasticized systems is determined by employing Jonscher’s universal power law.     

Effect of nano-size fumed silica on ionic conductivity of PVdF-HFP-based plasticized nano-composite polymer electrolytes

Nano-composite polymer electrolytes containing poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP), ammonium tetrafluoroborate (NH₄BF₄), and nano-size fumed silica (SiO₂) have been prepared and characterized by complex impedance spectroscopy. Ionic conductivity of polymer has been found to increase with the addition of NH₄BF₄, and a maximum conductivity of 3.62 × 10^?6 S/cm has been obtained at 30 wt% NH₄BF₄. The formation of ion aggregates at high concentration of salt has been explained by Bjerrum’s law and mass action considerations. The conductivity of polymer electrolytes has been increased by three orders of magnitude (10^?6 to 10^?3 S/cm) with the addition of plasticizer, and a maximum conductivity of 1.10 × 10^?3 S/cm has been observed at 80 wt% DMA. An increase in conductivity with the addition of nano-size fumed silica is attributed due to the formation of space-charge layers. A maximum conductivity of 7.20 × 10^?3 S/cm has been observed for plasticized nano-composite polymer electrolytes at 3 wt% SiO₂. X-ray diffraction analysis of polymer electrolyte system was also carried out. A small change in conductivity of nano-composite polymer electrolytes observed over the 30–130 °C temperature range and for a period of 30 days is also desirable for their use in various applications.     

Structural and ionic conductivity studies on proton conducting polymer electrolyte based on polyvinyl alcohol

An attempt has been made to prepare a new proton conducting polymer electrolyte based on polyvinyl alcohol (PVA) doped with NH₄NO₃ by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction analysis. The ionic conductivity of the prepared polymer electrolyte has been found by ac impedance spectroscopic analysis. The highest ionic conductivity has been found to be 7.5 × 10⁻³ Scm⁻¹ at ambient temperature for 20 mol% NH₄NO₃-doped PVA with low activation energy (~0.19 eV). The temperature-dependent conductivity of the polymer electrolyte follows an Arrhenius relationship, which shows hopping of ions in the polymer matrix.     

Synthesis and impedance analysis of proton-conducting polymer electrolyte PVA:NH4F

An attempt has been made to prepare a new proton-conducting polymer electrolyte based on poly(vinyl alcohol) doped with ammonium fluoride (NH₄F) by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction and Fourier transform infrared spectroscopy studies. The highest ionic conductivity has been found to be 6.9?×?10^?6?Scm^?1 at ambient temperature (303 K) for 85PVA:15NH₄F polymer electrolyte. The conductance spectra contain a low frequency plateau region and high frequency dispersion region. The dielectric spectra exhibit the low frequency dispersion, which is due to space charge accumulation at the electrode–electrolyte interface. The modulus spectra indicate non-Debye nature of the material. The highest ionic conductivity polymer electrolyte 85PVA:15NH₄F has low activation energy 0.2 eV among the prepared polymer electrolytes.     

Green electrolytes based on dextran-chitosan blend and the effect of NH<Subscript>4</Subscript>SCN as proton provider on the electrical response studies

Dextran-chitosan blend added with ammonium thiocyanate (NH₄SCN)-based solid polymer electrolytes are prepared by solution cast method. The interaction between the components of the electrolyte is verified by Fourier transform infrared (FTIR) analysis. The blend of 40 wt% dextran-60 wt% chitosan is found to be the most amorphous ratio. The room temperature conductivity of undoped 40 wt% dextran-60 wt% chitosan blend film is identified to be (3.84?±?0.97)?×?10^?10 S cm^?1. The inclusion of 40 wt.% NH₄SCN to the polymer blend has optimized the room temperature conductivity up (1.28?±?0.43)?×?10^?4 S cm^?1. Result from X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analysis shows that the electrolyte with the highest conductivity value has the lowest degree of crystallinity (χ _c) and the glass transition temperature (T _g), respectively. Temperature-dependence of conductivity follows Arrhenius theory. From transport analysis, the conductivity is noticed to be influenced by the mobility (μ) and number density (n) of ions. Conductivity trend is further verified by field emission scanning electron microscopy (FESEM) and dielectric results.     

Electrical impedance and conduction mechanism analysis of biopolymer electrolytes based on methyl cellulose doped with ammonium iodide

In the present study, the potential of methyl cellulose (MC) as biopolymer electrolyte (BPE) will be studied extensively by means of conductivity and the conduction mechanism. BPE films based on MC doped with ammonium iodide (NH₄I) salt were prepared by solution-casting method. X-ray diffraction (XRD) explains that the conductivity enhancement of the electrolytes is affected by the degree of crystallinity. Field emission scanning electron microscopy (FESEM) analysis shows the difference in the electrolyte’s surface with respect to NH₄I. On addition of 40 wt.% of NH₄I, the highest room temperature conductivity of (5.08?±?0.04)?×?10^?4 S cm^?1 was achieved. The temperature dependence relationship for the salted electrolyte was found to obey the Arrhenius rule where R² ～1 from which the activation energy (E _a) was evaluated. The dielectric study analyzed using complex permittivity ε* for the sample with the highest conductivity at elevated temperature shows a non- Debye behavior. These salted electrolytes follow the correlated barrier hopping (CBH) model.     

Synthesis and characterization of proton-conducting polymer electrolyte based on polyacrylonitrile (PAN)

Solid polymer electrolytes based on polyacrylonitrile (PAN) doped with ammonium iodide (NH₄I) have been prepared by solution casting method with different molar ratios of polymer and salt using DMF as solvent. The XRD pattern confirms the dissociation of salt. The FTIR analysis confirms the complex formation between the polymer and the salt. A shift in glass transition temperature (T _g ) of the PAN/NH₄I electrolytes has been observed from the DSC thermograms, which indicates the interaction between the polymer and the salt. The conductivity analysis shows that the polymer electrolyte with 20 mol% NH₄I has the highest conductivity equal to 1.106 × 10⁻³ S cm⁻¹ at room temperature. The activation energy (E _a ) has been found to be low for the highest conductivity sample. The dielectric permittivity (ε*) and modulus (M*) have been calculated from the alternating current (AC) impedance spectroscopy in the frequency range 42 Hz–1 MHz. The DC polarization measurement shows that the conductivity is mainly due to ions.

     

Proton-conducting biopolymer electrolytes based on pectin doped with NH4X (X=Cl,Br)

Research has been undertaken to develop polymer electrolytes based on biodegradable natural polymers such as cellulose acetate, starch, gelatin, and chitosan, which are being used as polymer hosts for obtaining new polymer electrolytes for their applications in various electrochemical devices such as batteries, sensors, and electrochromic windows. Pectin is a naturally available material which is extracted from the skin of citrus fruits. Pectins, also known as pectic polysaccharides, are rich in galacturonic acid. The present study focuses on the proton-conducting polymer electrolytes based on the biopolymer pectin doped with ammonium chloride (NH₄Cl) and ammonium bromide (NH₄Br) prepared by solution casting technique. The prepared membranes are characterized using XRD, FTIR, and AC impedance techniques to study their complexation behavior, amorphous nature, and electrical properties. The conductivity of pure pectin membrane has been found to be 9.41 × 10⁻⁷ S cm⁻¹. The polymer systems with 30 mol% NH₄Cl-doped pectin and 40 mol% NH₄Br-doped pectin have been found to have maximum ionic conductivity of 4.52 × 10⁻⁴ and 1.07 × 10⁻³ S cm⁻¹, respectively. The conductivity value has increased by three orders of magnitude compared to pure pectin membrane. The dielectric behavior of both the systems has been explained using dielectric permittivity and electric modulus spectra.

     

Spectroscopic studies on ion dynamics of PVP–NH4SCN polymer electrolytes

Proton-conducting polymer electrolyte comprising of poly(N-vinyl pyrrolidone) (PVP) and ammonium thiocyanate (NH₄SCN) are prepared by solvent casting method with different polymer–salt concentrations. The changes in the Raman spectra with increasing NH₄SCN concentration state that the free ion concentration is maximum for 20 mol% NH₄SCN concentrated system. At higher salt concentrations (25 mol%), the effective number of charge carriers decreases due to the formation of ion aggregates as confirmed by the Raman analysis. Solid-state NMR and MAS NMR studies are performed to obtain the information about the ionic structure, mobility of the charge carriers, and also to gain insight into the polymer–salt interactions in the polymer electrolytes. The results of ionic transference number show that the charge transport in these polymer electrolytes is mainly due to ions.     

Role of polyvinyl alcohol in the conductivity behaviour of polyethylene glycol-based composite gel electrolytes

An attempt has been made in the present work to combine gel and composite polymer electrolyte routes together to form a composite polymeric gel electrolyte that is expected to possess high ionic conductivity with good mechanical integrity. Polyethylene glycol (PEG) based composite gel electrolytes using polyvinyl alcohol (PVA) as guest polymer have been synthesized with 1 molar solution of ammonium thiocyanate (NH₄SCN) in dimethyl sulphoxide (DMSO) and electrically characterized. The ionic conductivity measurements indicate that PEG:PVA:NH₄SCN-based composite gel electrolytes are superior (σ _max = 5.7 × 10⁻² S cm⁻¹) to pristine electrolytes (PEG:NH₄SCN system) and conductivity variation with filler concentration remains within an order of magnitude. The observed conductivity maxima have been correlated to PEG:PVA:NH₄SCN-and PVA:NH₄SCN-type complexes. Temperature dependence of conductivity profiles exhibits Arrhenius behaviour in low temperature regime followed by VTF character at higher temperature.      

Characterization of high ionic conducting PVAc–PMMA blend-based polymer electrolyte for electrochemical applications

A solid polymer blend electrolyte is prepared using poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) polymers with different molecular weight percentage (wt%) of ammonium thiocyanate (NH₄SCN) by solution casting technique with tetrahydrofuran (THF) as a solvent. The structural, morphological, vibrational, thermal and electrical properties of the prepared polymer blend electrolytes have been studied. The incorporation of NH₄SCN into the polymeric matrix causes decrease in the degree of crystallinity of the samples. The complex formation between the polymer and salt has been confirmed by FTIR technique. The increase in T _g with increase in salt concentration has been investigated. The maximum conductivity of 3.684?×?10^?3 S cm^?1 has been observed for the composition of 70PVAc/30PMMA/30 wt% of NH₄SCN at 303 K. This value of ionic conductivity is five orders of magnitude greater than that of 70PVAc/30PMMA polymer membrane. Dielectric and transport studies have been done. The highest conducting polymer electrolyte is used to fabricate proton battery with the configuration Zn/ZnSO₄·7H₂O (anode) ||polymer electrolyte||PbO₂/V₂O₅ (cathode). The open circuit voltage of the fabricated battery is 1.83 V, and its performance has been studied.     

Incorporation of NH4Br in PVA-chitosan blend-based polymer electrolyte and its effect on the conductivity and other electrical properties

Polymer electrolyte system based on poly(vinyl alcohol) (PVA)-chitosan blend doped with ammonium bromide (NH₄Br) has been prepared by solution cast method. Fourier transform infrared (FTIR) spectroscopy analysis confirms the complexation between salt and polymer host. The highest ionic conductivity obtained at room temperature is (7.68?±?1.24)?×?10^?4 S cm^?1 for the sample comprising of 30 wt% NH₄Br. X-ray diffraction (XRD) patterns reveal that PVA-chitosan with 30 wt% NH₄Br exhibits the most amorphous structure. Thermogravimetric analysis (TGA) reveals that the electrolytes are stable until ～260 °C. The conductivity variation can also be explained by field emission scanning electron microscopy (FESEM) study. Dielectric properties of the electrolytes follow non-Debye behavior. The conduction mechanism of the highest conducting electrolyte can be represented by the correlated barrier hopping (CBH) model. From linear sweep voltammetry (LSV) result, the highest conducting electrolyte is electrochemically stable at 1.57 V.