Synthesis and characterization of zinc bis(O‐isopropylxanthate) as a single‐source chemical vapor deposition precursor for ZnS

The utilization of single‐source molecular precursors in chemical vapor deposition (CVD) experiments requires a deep knowledge of their chemico‐physical properties, with particular regard to thermal stability and fragmentation pattern. This study describes the synthesis and characterization of zinc bis(O‐isopropylxanthate), Zn(O‐ⁱPrXan)₂, [O‐ⁱPrXan = (CH₃)₂CHOCS₂], a single‐source precursor for the CVD of zinc(II) sulfide thin films and nanorods. Several analytical methods yielding complementary information (extended X‐ray absorption fine structure, Raman, FT‐IR, UV–Vis optical absorption, ¹H and ¹³C NMR, thermogravimetric analysis, differential scanning calorimetry as well as mass spectrometry techniques, i.e. electrospray and electron ionization, mass‐analyzed ion kinetic energy) are adopted for a comprehensive investigation of purity, structure, thermal behavior and decomposition pathways of the molecule. The most significant results are discussed critically and the properties useful for CVD applications are highlighted. Copyright © 2005 John Wiley & Sons, Ltd.     

An iron (II) guanidinate compound: Synthesis,characterization, thermal properties and its application as a CVD precursor for iron oxide film

An iron compound containing guanidinate ligand [Fe((SiMe₃)₂NC(ⁱPrN)₂)₂] was synthesized using a conventional lithium‐salt‐elimination reaction, and its chemical structure was characterized through elemental analysis, ¹H‐NMR and single‐crystal X‐ray diffraction, respectively. The thermal properties of the compound were examined through thermogravimetric analysis (TGA), and the TGA results demonstrated that the compound possessed sufficient volatility and suitable thermal stability for the CVD process. Moreover, the deposition experiments were conducted using the synthesized compound as a precursor and O₂ as an oxygen source to confirm its applicability as a CVD precursor, and α‐Fe₂O₃ films were successfully deposited at a relatively low deposition temperature (300°C).     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

Single‐armed salamo‐like dioxime and its multinuclear Cu (II), Zn (II) and Cd (II) complexes: Syntheses,structural characterizations,Hirshfeld analyses and fluorescence properties

Three multinuclear Cu (II), Zn (II) and Cd (II) complexes, [Cu₂(L)(μ‐OAc)]·CHCl₂ ( 1 ), [Zn₂(L)(μ‐OAc)(H₂O)]·3CHCl₃ ( 2 ) and [{Cd₂(L)(OAc)(CH₃CH₂OH)}₂]·2CH₃CH₂OH ( 3 ) with a single‐armed salamo‐like dioxime ligand H₃L have been synthesized, and characterized by FT‐IR, UV–vis, X‐ray crystallography and Hirshfeld surfaces analyses. The ligand H₃L has a linear structure and C‐H···π interactions between the two molecules. The complex 1 is a dinuclear Cu (II) complex, Cu1 and Cu2 are all five‐coordinate possessing distorted square pyramidal geometries. The complex 2 also forms a dinuclear Zn (II) structure, and Zn1 and Zn2 are all five‐coordinate bearing distorted trigonal bipyramidal geometries. The complex 3 is a symmetrical tetranuclear Cd (II) complex, and Cd1 is a hexa‐coordinate having octahedral configuration and Cd2 is hepta‐coordinate with a pentagonal bipyramidal geometry, and it has π···π interactions inside the molecule. In addition, fluorescence properties of the ligand and its complexes 1 – 3 have also been discussed.     

A 4′‐(4‐carboxyphenyl)‐3,2′:6′,3′′‐terpyridine‐based luminescent cadmium(II) coordination polymer for the detection of 2,4,6‐trinitrophenol

The title coordination polymer, poly[bis[μ3‐4‐(3,2′:6′,3′′‐terpyridin‐4′‐yl)benzoato]cadmium(II)], [Cd(C₂₂H₁₄N₃O₂)₂]_n or [Cd(3‐cptpy)₂]_n, (I), has been synthesized solvothermally and characterized by IR spectroscopy, thermogravimetric analysis, and single‐crystal and powder X‐ray diffraction. The structure is composed of 3‐cptpy^? ligands bridging Cd atoms, with each Cd atom coordinated by six ligands and each ligand coordinating to three Cd atoms. Each Cd atom is in a slightly distorted trans‐N₂O₄ octahedral environment, forming a two‐dimensional layer structure with a (3,6)‐connected topology. Layers are linked to each other by π–π stacking, resulting in a three‐dimensional supramolecular framework. The strong luminescence and good thermal stability of (I) indicate that it can potentially be used as a luminescence sensor. The compound also shows a highly selective and sensitive response to 2,4,6‐trinitrophenol through the luminescence quenching effect.     

Enhanced third‐order nonlinear optical properties determined in thin films using the Z‐scan technique: bis(μ‐4,4′‐oxydibenzoato)bis[(4′‐phenyl‐2,2′:6′,2′′‐terpyridine)cobalt(II)]

π‐Conjugated organic materials exhibit high and tunable nonlinear optical (NLO) properties, and fast response times. 4′‐Phenyl‐2,2′:6′,2′′‐terpyridine (PTP) is an important N‐heterocyclic ligand involving π‐conjugated systems, however, studies concerning the third‐order NLO properties of terpyridine transition metal complexes are limited. The title binuclear terpyridine Co^II complex, bis(μ‐4,4′‐oxydibenzoato)‐κ³O,O′:O′′;κ³O′′:O,O′‐bis[(4′‐phenyl‐2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)cobalt(II)], [Co₂(C₁₄H₈O₅)₂(C₂₁H₁₅N₃)₂], (1), has been synthesized under hydrothermal conditions. In the crystal structure, each Co^II cation is surrounded by three N atoms of a PTP ligand and three O atoms, two from a bidentate and one from a symmetry‐related monodentate 4,4′‐oxydibenzoate (ODA²⁻) ligand, completing a distorted octahedral coordination geometry. Neighbouring [Co(PTP)]²⁺ units are bridged by ODA²⁻ ligands to form a ring‐like structure. The third‐order nonlinear optical (NLO) properties of (1) and PTP were determined in thin films using the Z‐scan technique. The title compound shows a strong third‐order NLO saturable absorption (SA), while PTP exhibits a third‐order NLO reverse saturable absorption (RSA). The absorptive coefficient β of (1) is −37.3 × 10⁻⁷ m W⁻¹, which is larger than that (8.96 × 10⁻⁷ m W⁻¹) of PTP. The third‐order NLO susceptibility χ⁽³⁾ values are calculated as 6.01 × 10⁻⁸ e.s.u. for (1) and 1.44 × 10⁻⁸ e.s.u. for PTP.     

Crystal Structure and EPR Spectra of cis—Dioxo—molybdenum（V） Complex with o—Aminophenol

ＩｎｔｒｏｄｕｃｔｉｏｎＭｏｌｙｂｄｅｎｕｍｉｓｗｉｄｅｌｙｕｓｅｄｉｎｂｉｏｌｏｇｉｃａｌｓｙｓｔｅｍｓｄｕｅｔｏｔｈｅｔｗｏｂａｓｉｃｆｏｒｍｓ :ｎｉｔｒｏｇｅｎａｓｅｓａｎｄｏｘｏｔｒａｎｓｆｅｒａｓｅｓｏｒｏｘｏｍｏｌｙｂｄｏｅｎｚｙｍｅｓ .Ｔｈｅｌａｔｔｅｒａｓｔｈｅｍｏｎｏｎｕｃｌｅａｒａｃｔｉｖｅｓｉｔｅｓｏｆａｍｕｃｈｍｏｒｅｄｉｖｅｒｓｅｇｒｏｕｐｏｆｅｎｚｙｍｅｓｉｎｇｅｎｅｒａｌｆｕｎｃｔｉｏｎｃａｔａｌｙｔｉｃａｌｌｙｔｒａｎｓｆｅｒａｎｏｘｙｇｅｎａｔｏｍｅｉｔｈｅｒｔ…     

CuO/ZnO Nanocomposite Gas Sensors Developed by a Plasma‐Assisted Route

CuO/ZnO nanocomposites were synthesized on Al₂O₃ substrates by a hybrid plasma‐assisted approach, combining the initial growth of ZnO columnar arrays by plasma‐enhanced chemical vapor deposition (PE‐CVD) and subsequent radio frequency (RF) sputtering of copper, followed by final annealing in air. Chemical, morphological, and structural analyses revealed the formation of high‐purity nanosystems, characterized by a controllable dispersion of CuO particles into ZnO matrices. The high surface‐to‐volume ratio of the obtained materials, along with intimate CuO/ZnO intermixing, resulted in the efficient detection of various oxidizing and reducing gases (such as O₃, CH₃CH₂OH, and H₂). The obtained data are critically discussed and interrelated with the chemical and physical properties of the nanocomposites.     

Areneruthenium(II) Complexes with Functionalized Phosphines Coordinating as Mono‐, Bi‐ or Tridentate Ligands

Areneruthenium(II) compounds [Ru(p‐cym)Cl₂{κ‐P‐ⁱPrP(CH₂CH₂OMe)₂}], 3 , and [Ru(arene)Cl₂{κ‐P‐RP(CH₂CO₂Me)₂}] 4 – 7 (arene=p‐cym (=1‐methyl‐4‐isopropylbenzene), mes (=1,3,5‐trimethylbenzene); R=ⁱPr, ^tBu) were prepared from the dimers [Ru(arene)Cl₂]₂ and the corresponding functionalized phosphine. Treatment of 6 and 7 with 1 equiv. of AgPF₆ affords the monocationic complexes [Ru(mes)Cl{κ²‐P,O‐RP(CH₂C(O)OMe)(CH₂CO₂Me)}]PF₆, 10 and 11 , while the related reaction of 5 – 7 with 2 equiv. of AgPF₆ produces the dicationic compounds [Ru(p‐cym){κ³‐P,O,O‐^tBuP(CH₂C(O)OMe)₂}](PF₆)₂ ( 12 ) and [Ru(mes){κ³‐P,O,O‐RP(CH₂C(O)OMe)₂}](PF₆)₂, 13 and 14 . Partial hydrolysis of one hexafluorophosphate anion of 12 – 14 leads to the formation of [Ru(arene){κ²‐P,O‐RP(CH₂C(O)OMe)(CH₂CO₂Me)}(κ‐O‐O₂PF₂)]PF₆, 15 – 17 , of which 17 (arene=mes; R=^tBu) has been characterized by X‐ray crystallography. Compounds 13 and 14 react with 2 equiv. of KO^tBu in ^tBuOH/toluene to give the unsymmetrical complexes [Ru(mes){κ³‐P,C,O‐RP(CHCO₂Me)(CH=C(O)OMe)}], 18 and 19 , containing both a five‐membered phosphinoenolate and a three‐membered phosphinomethanide ring. The molecular structure of compound 18 has been determined by X‐ray structure analysis. The neutral bis(carboxylate)phosphanidoruthenium(II) complexes [Ru(arene){κ³‐P,O,O‐RP(CH₂C(O)O)₂}], 20 – 23 are obtained either by hydrolysis of 18 and 19 , or by stepwise treatment of 4 and 5 with KO^tBu and basic Al₂O₃. Novel tripodal chelating systems are generated via insertion reactions of 19 with PhNCO and PhNCS.     

Mononuclear and three‐dimensional metal complexes based on a multidentate hydrazone ligand

A potentially pentadentate hydrazone ligand, N′‐[1‐(pyrazin‐2‐yl)ethylidene]nicotinohydrazide (HL), was prepared from the condensation reaction of nicotinohydrazide and acetylpyrazine. Reactions of HL with MnCl₂, Mn(CH₃COO)₂ and Cd(CH₃COO)₂ afforded three metal complexes, namely dichlorido{N′‐[1‐(pyrazin‐2‐yl‐κN¹)ethylidene]nicotinohydrazide‐κ²N′,O}manganese(II), [MnCl₂(C₁₂H₁₁N₅O)], (I), bis{N′‐[1‐(pyrazin‐2‐yl‐κN¹)ethylidene]nicotinohydrazidato‐κ²N′,O]manganese(II), [Mn(C₁₂H₁₀N₅O)₂], (II), and poly[[(acetato‐κ²O,O′){μ₃‐N′‐[1‐(pyrazin‐2‐yl‐κ²N¹:N⁴)ethylidene]nicotinohydrazidato‐κ³N′,O:N¹}cadmium(II)] chloroform disolvate], {[Cd(C₁₂H₁₀N₅O)(CH₃COO)]·2CHCl₃}_n, (III), respectively. Complex (I) has a mononuclear structure, the Mn^II centre adopting a distorted square‐pyramidal coordination. Complex (II) also has a mononuclear structure, with the Mn^II centre occupying a special position (C₂ symmetry) and adopting a distorted octahedral coordination environment, which is defined by two O atoms and four N atoms from two N′‐[1‐(pyrazin‐2‐yl)ethylidene]nicotinohydrazidate (L⁻) ligands related via a crystallographic twofold axis. Complex (III) features a unique three‐dimensional network with rectangular channels, and the L⁻ ligand also serves as a counter‐anion. The coordination geometry of the Cd^II centre is pentagonal bipyramidal. This study demonstrates that HL, which can act as either a neutral or a mono‐anionic ligand, is useful in the construction of interesting metal–organic compounds.     

Synthesis and characterization of some methylbismuth (III) O,O‐alkylenedithiophosphates: convenient transformation of and to pure Bi2S3

A series of methylbismuth(III)O,O‐alkylenedithiophosphates of the type [where G = CH₂CH(CH₃) ( 1 ), (CH₂)₄ ( 2 ), CH₂CH₂CH(CH₃) ( 3 ), CH(CH₃)CH(CH₃) ( 4 ), CH₂CHCH₂CH₃ ( 5 ), CH(CH₃)CH₂C(CH₃)₂ ( 6 ) and C(CH₃)₂C(CH₃)₂ ( 7 )] have been isolated by the reaction of methylbismuth(III) dichloride with potassium salt of O,O‐alkylenedithiophosphoric acids in 1:2 molar ratio in anhydrous benzene. These newly synthesized derivatives were characterized by elemental analyses, FT IR and multinuclear NMR (¹H, ¹³C and ³¹P) spectral studies. Thermogravimetric analysis of 6 has shown a single‐step decomposition of complex to Bi₂S₃ at 154.3 °C. Transformation of 2 and 6 to pure Bi₂S₃ was carried out successfully at refluxing xylene temperature (142 °C) as revealed by XRD and SEM analyses. Copyright © 2006 John Wiley & Sons, Ltd.     

A new one‐dimensional coordination polymer of 5‐(1,3‐dioxo‐4,5,6,7‐tetraphenylisoindolin‐2‐yl)isophthalic acid with manganese

The coordination polymer catena‐poly[[(dimethylformamide‐κO)[μ₃‐5‐(1,3‐dioxo‐4,5,6,7‐tetraphenylisoindolin‐2‐yl)isophthalato‐κ⁴O¹,O^1′:O³:O^3′](methanol‐κO)manganese(III)] dimethylformamide monosolvate], {[Mn(C₄₀H₂₃NO₆)(CH₃OH)(C₃H₇NO)]·C₃H₇NO}_n, has been synthesized from the reaction of 5‐(1,3‐dioxo‐4,5,6,7‐tetraphenylisoindolin‐2‐yl)isophthalic acid and manganese(II) acetate tetrahydrate in a glass tube at room temperature by solvent diffusion. The Mn^II centre is hexacoordinated by two O atoms from one chelating carboxylate group, by two O atoms from two monodentate carboxylate groups and by one O atom each from a methanol and a dimethylformamide (DMF) ligand. The single‐crystal structure crystallizes in the triclinic space group P. Moreover, the coordination polymer shows one‐dimensional 2‐connected {0} uninodal chain networks, and free DMF molecules are connected to the chains by O—H...O hydrogen bonds. The thermogravimetric and photoluminescent properties of the compound have also been investigated.     

A new one‐dimensional CdII coordination polymer incorporating 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylate)

Imidazole‐4,5‐dicarboxylic acid (H₃IDC) and its derivatives are widely used in the preparation of new coordination polymers owing to their versatile bridging coordination modes and potential hydrogen‐bonding donors and acceptors. A new one‐dimensional coordination polymer, namely catena‐poly[[diaquacadmium(II)]‐μ₃‐2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylato)], [Cd(C₁₆H₆N₄O₈)_0.5(H₂O)₂]_n or [Cd(H₂Phbidc)_1/2(H₂O)₂]_n, has been synthesized by the reaction of Cd(OAc)₂·2H₂O (OAc is acetate) with 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylic acid) (H₆Phbidc) under solvothermal conditions. In the polymer, one type of Cd ion (Cd1) is six‐coordinated by two N atoms and two O atoms from one H₂Phbidc⁴⁻ ligand and by two O atoms from two water molecules, forming a significantly distorted octahedral CdN₂O₄ coordination geometry. In contrast, the other type of Cd ion (Cd2) is six‐coordinated by two N atoms and two O atoms from two symmetry‐related H₂Phbidc⁴⁻ ligands and by two O atoms from two symmetry‐related water molecules, leading to a more regular octahedral coordination geometry. The Cd1 and Cd2 ions are linked by H₂Phbidc⁴⁻ ligands into a one‐dimensional chain which runs parallel to the b axis. In the crystal, the one‐dimensional chains are connected through hydrogen bonds, generating a two‐dimensional layered structure parallel to the ab plane. Adjacent layers are further linked by hydrogen bonds, forming a three‐dimensional structure in the solid state.     

Phosphaniminato‐Acetato‐Komplexe von Cobalt und Cadmium mit M4N4‐Heterocuban‐Struktur

Phosphoraneiminato‐Acetato Complexes of Cobalt and Cadmium with M₄N₄ Heterocubane Structure The phosphoraneiminato‐acetato complexes [M(NPEt₃)(O₂C–CH₃)]₄ with M = Co and Cd are formed from the anhydrous metal(II) acetates with excess Me₃SiNPEt₃ at 180 °C. By crystallization from diethyl ether blue, moisture sensitive single crystals of [Co(NPEt₃) · (O₂C–CH₃)]₄ can be obtained, while colourless single crystals of [Cd(NPEt₃)(O₂C–CH₃)]₄ · 2 CH₂Cl₂ originate from dichloromethane solution. In vacuo the intercalary CH₂Cl₂ is released. The complexes are characterized by their IR spectra and by crystal structure analyses. In both complexes the metal atoms are associated via μ₃–N bridges of the (NPEt₃^–) groups to form heterocubanes. In the cobalt complex the acetato ligands are bonded in a semichelate fashion with a short Co–O and a long Co–O bond each (Co–O distances in average 199.5 and 257.4 pm). In the cadmium complex the acetato groups form almost symmetrical chelates (Cd–O distances in average 232.1 and 237.8 pm); this leads to a distorted trigonal‐bipyramidal arrangement at the cadmium atoms. [Co(NPEt₃)(O₂C–CH₃)]₄: Space group P 1, Z = 4, lattice dimensions at –60 °C: a = 1110.1(2), b = 2051.3(5), c = 2169.5(4) pm, α = 100.03(2)°, β = 103.404(15)°, γ = 97.63(2)°, R = 0.0480. [Cd(NPEt₃)(O₂C–CH₃)]₄ · 2 CH₂Cl₂: Space group C2/c, Z = 4, lattice dimensions at –80 °C: a = 1550.2(1), b = 2101.1(1), c = 1706.1(1) pm, β = 91.09(1)°, R = 0.0311.     

Synthesis,Characterization, and Energetic Properties of Nitroso Compounds

Sodium and potassium methyl(nitroso)amide (M[CH₃N₂O], M = Na ( 1 ), K ( 2 )) were prepared by the reaction of monomethylhydrazine with iso‐pentyl nitrite or n‐butyl nitrite and a suitable metal ethoxide (M[CH₃CH₂O], M = Na, K) in an ethanol‐ether mixture. The reaction of monomethylhydrazine with a small excess of iso‐pentyl nitrite or n‐butyl nitrite and in the absence of a metal ethoxide led to the formation of N‐nitroso‐N‐methylhydrazine (CH₃(NO)N–NH₂, ( 3 )). Alternatively, compound 3 was prepared by the amination reaction of 1 or 2 using the sodium salt of HOSA in ethanol solution. Compounds 1–3 were characterized using elemental analysis, differential scanning calorimetry, mass spectrometry, vibrational (infrared and Raman) and UV spectroscopy and multinuclear (¹H, ¹³C and ¹⁵N) NMR spectroscopy. For compounds 1–3 , several physical and chemical properties of interest and sensitivity data were measured and for compound 3 thermodynamic and explosive properties are also given. Additionally, the solid‐state structure of compound 3 was determined by single‐crystal X‐ray analysis and the structures of the cis‐ and trans‐[CH₃N₂O]^– anions and that of 3 were optimized using DFT calculations and used to calculate the NBO charges.     

One‐ and two‐dimensional CdII coordination polymers incorporating organophosphinate ligands

Reaction of cadmium nitrate with diphenylphosphinic acid in dimethylformamide solvent yielded the one‐dimensional coordination polymer catena‐poly[[bis(dimethylformamide‐κO)cadmium(II)]‐bis(μ‐diphenylphosphinato‐κ²O:O′)], [Cd(C₁₂H₁₀O₂P)₂(C₃H₇NO)₂]_n, (I). Addition of 4,4′‐bipyridine to the synthesis afforded a two‐dimensional extended structure, poly[[(μ‐4,4′‐bipyridine‐κ²N:N′)bis(μ‐diphenylphosphinato‐κ²O:O′)cadmium(II)] dimethylformamide monosolvate], {[Cd(C₁₂H₁₀O₂P)₂(C₁₀H₈N₂)]·C₃H₇NO}_n, (II). In (II), the 4,4′‐bipyridine molecules link the Cd^II centers in the crystallographic a direction, while the phosphinate ligands link the Cd^II centers in the crystallographic b direction to complete a two‐dimensional sheet structure. Consideration of additional π–π interactions of the phenyl rings in (II) produces a three‐dimensional structure with channels that encapsulate dimethylformamide molecules as solvent of crystallization. Both compounds were characterized by single‐crystal X‐ray diffraction and FT–IR analysis.     

Lead(II) and cadmium(II) complexes of 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine-p,p′-disulfonate with high thermal stability

Pb(II) and Cd(II) complexes, {[Pb₂(PDTS)₂(CH₃OH)((H₂O)₂]? H₂O} _n (1) and [Cd(PDTS)(H₂O)₄]? 2H₂O (2) (PDTS^2? = 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine-p,p′-disulfonate), are synthesized and characterized by elemental analysis, infrared (IR), ¹H-NMR spectroscopy, and thermal analysis. The single-crystal structure of 1 shows that the complex forms a 2-D polymeric network containing two types of Pb²⁺ with coordination number eight (PbN₂O₆). Both possess hemidirected coordination geometries. The single-crystal structure of 2 shows distorted octahedral geometry for cadmium(II), CdN₂O₄. These compounds are the first complexes of “PDTS^2?”. The supramolecular features in these complexes are guided/controlled by hydrogen bonding and noncovalent intermolecular interactions.     

Poly[[diaqua­cadmium(II)]‐μ4‐[N‐(phosphonato­methyl)ammonio]acetato]

The title compound, [Cd(C₃H₆NO₅P)(H₂O)₂]_n, is a three‐dimensional polymeric complex. The asymmetric unit contains one Cd atom, one N‐(phosphono­methyl)glycine zwitterion [(O⁻)₂OPCH₂NH₂⁺CH₂COO⁻] and two water mol­ecules. The coordination geometry is a distorted CdO₆ octa­hedron. Each N‐(phosphono­methyl)glycine ligand bridges four adjacent water‐coordinated Cd cations through three phospho­nate O atoms and one carboxyl­ate O atom, like a regular PO₄³⁻ group in zeolite‐type frameworks. One‐dimensional zigzag (–O—P—C—N—C—C—O—Cd–)_n chains along the [101] direction are linked to one another via Cd—O—P bridges and form a three‐dimensional network motif with three types of channel systems. The variety of O—H⋯O and N—H⋯O hydrogen bonds is likely to be responsible for stabilizing the three‐dimensional network structure and preventing guest mol­ecules from entering into the channels.     

In‐situ XAFS Studies of Mn12 Molecular‐Cluster Batteries: Super‐Reduced Mn12 Clusters in Solid‐State Electrochemistry

In situ X‐ray absorption fine structure (XAFS) analyses were performed on rechargeable molecular cluster batteries (MCBs), which were formed by a lithium anode and cathode‐active material, [Mn₁₂O₁₂(CH₃CH₂C(CH₃)₂COO)₁₆(H₂O)₄] with tert‐pentyl carboxylate ligand (abbreviated as Mn12tPe), and with eight Mn³⁺ and four Mn⁴⁺ centers. This mixed valence cluster compound is used in an effort to develop a reusable in situ battery cell that is suitable for such long‐term performance tests. The Mn12tPe MCBs exhibit a large capacity of approximately 210 Ah kg⁻¹ in the voltage range V=4.0–2.0 V. The X‐ray absorption near‐edge structure (XANES) spectra exhibit a systematic change during the charging/discharging with an isosbestic point at 6555 eV, which strongly suggests that only either the Mn³⁺ or Mn⁴⁺ ions in the Mn12 skeleton are involved in this battery reaction. The averaged manganese valence, determined from the absorption‐edge energy, decreased monotonically from 3.3 to 2.5 in the first half of the discharging (4.0>V>2.8 V), but changed little in the second half (2.8>V>2.0 V). The former valence change indicates a reduction of the initial [Mn12]⁰ state by approximately ten electrons, which corresponds well with the half value of the observed capacity. Therefore, the large capacity of the Mn12 MCBs can be understood as being due to a combination of the redox change of the manganese ions and presumably a capacitance effect. The extended X‐ray absorption fine structure (EXAFS) indicates a gradual increase of the Mn²⁺ sites in the first half of the discharging, which is consistent with the XANES spectra. It can be concluded that the Mn12tPe MCBs would include a solid‐state electrochemical reaction, mainly between the neutral state [Mn12]⁰ and the super‐reduced state [Mn12]⁸⁻ that is obtained by a local reduction of the eight Mn³⁺ ions in Mn12 toward Mn²⁺ ions.     

Ba2Cd(B3O6)2: A Congruent‐Melting Compound with Isolated B3O6 Units

The single crystals of Ba₂Cd(B₃O₆)₂ were grown by the spontaneous crystallization method for the first time. They crystallize in the centrosymmetric trigonal space group R$\bar{3}$ with a = 7.143(3) Å, c = 17.405(16) Å, and Z = 3. The structure is characterized by isolated B₃O₆ units, and the Ba²⁺ and Cd²⁺ cations connect with B₃O₆ rings to form three dimensional structure. The TG/DSC and XRD results reveal that Ba₂Cd(B₃O₆)₂ melts congruently. First‐principles electronic structure calculation performed with the density functional theory (DFT) method shows that the calculated bandgaps are 4.66 eV, which is in good agreement with the UV/Vis/NIR experimental value 4.59 eV. The calculation shows that the Ba₂Cd(B₃O₆)₂ crystal has a large birefringence (Δn = 0.0875–0.0569 from 270 nm to 2600 nm), which demonstrates that Ba₂Cd(B₃O₆)₂ is a potential birefringence crystal.