Molecular distribution of some commercial nonylphenol ethoxylates using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Nonylphenol ethoxylates (NPEs) belong to a group of nonionic surfactants that are collectively referred to as alkylphenol ethoxylates (APEs). APEs find widespread use in heavy-duty commercial and household cleaning formulations, shampoos, and industrial processing, i.e. textile manufacture. Their environmental impact depends on the molecular distribution and the extent of their biodegradation in municipal sewage systems, waterways and rivers. We have established two sample preparation methods that have enabled the determination of the molecular distributions of six commercial nonylphenol ethoxylates using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS). In both methods, alpha-cyano-4-hydroxycinnamic acid, dissolved in acetonitrile/tetrahydrofuran, was used as the matrix. In one set of experiments, the NPEs were dissolved in an acetonitrile/tetrahydrofuran solvent system prior to mixing with the matrix solution, and the resulting MALDI-TOF mass spectra produced mostly sodiated molecules [M + Na](+). The NPEs, all having the formula 4-(C(9)H(19))-C(6)H(4)-(OCH(2)CH(2))(n)-OH, are Surfonic (R)N-95, N-100, N-102, N-120, N-150 and N-300. Surfonic N-95 and N-100 gave n values of 5-20; Surfonic N-102, N-120, N-150, and N-300 gave n values of 5-21, 5-22, 8-25 and 15-40, respectively. In order to develop a sample preparation method that could be used with less polar NPEs, we dissolved the NPEs (except N-300) in pentane prior to mixing with the matrix solution, and found that the MALDI spectral quality was unaffected by the solvent systems. Copyright 1999 John Wiley & Sons, Ltd.     

Analysis of dammar resin with MALDI-FT-ICR-MS and APCI-FT-ICR-MS

Comprehensive analysis of high-resolution mass spectra of aged natural dammar resin obtained with Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR-MS) using matrix-assisted laser desorption/ionization (MALDI) and atmospheric pressure chemical ionization (APCI) is presented. Dammar resin is one of the most important components of painting varnishes. Dammar resin is a terpenoid resin (dominated by triterpenoids) with intrinsically very complex composition. This complexity further increases with aging. Ten different solvents and two-component solvent mixtures were tested for sample preparation. The most suitable solvent mixtures for the MALDI-FT-ICR-MS analysis were dichloromethane-acetone and dichloromethane-ethanol. The obtained MALDI-FTMS mass spectrum contains nine clusters of peaks in the m/z range of 420-2200, and the obtained APCI-FTMS mass spectrum contains three clusters of peaks in the m/z range of 380-910. The peaks in the clusters correspond to the oxygenated derivatives of terpenoids differing by the number of C(15)H(24) units. The clusters, in turn, are composed of subclusters differing by the number of oxygen atoms in the molecules. Thorough analysis and identification of the components (or groups of components) by their accurate m/z ratios was carried out, and molecular formulas (elemental compositions) of all major peaks in the MALDI-FTMS and APCI-FTMS spectra were identified (and groups of possible isomeric compounds were proposed). In the MALDI-FTMS and APCI-FTMS mass spectrum, besides the oxidized C(30), triterpenoids also peaks corresponding to C(29) and C(31) derivatives of triterpenoids (demethylated and methylated, correspondingly) were detected. MALDI and APCI are complementary ionization sources for the analysis of natural dammar resin. In the MALDI source, preferably polar (extensively oxidized) components of the resin are ionized (mostly as Na(+) adducts), whereas in the APCI source, preferably nonpolar (hydrocarbon and slightly oxidized) compounds are ionized (by protonation). Either of the two ionization methods, when used alone, gives an incomplete picture of the dammar resin composition.     

A discharge adaptor interface for use in liquid chromatography/mass spectrometry

A discharge adaptor, composed of a metal casing and platinum (Pt) wire needle, was directly attached to an electrospray ionization (ESI) probe tip, to transform the ionization into atmospheric pressure chemical ionization (APCI). Six generic drugs were analyzed with the developed discharge adaptor (DA) and two commercial interfaces. The DA interface produced more intense radical anions, [M]˙?, and less sodium adduct ions, [M + Na]?, than the ESI interface, whereas almost the same molecular ions were detected as the APCI interface. The effects of solvent and desolvation gas flow in the DA interface were similar to those in the ESI interface, but differed from those in the APCI interface. Better sensitivity of the tested drugs was obtained relative to the commercial APCI interface. For human plasma samples, the DA interface also demonstrated good tolerance to plasma matrices, linearity from 5 or 20 to 500 ng/mL (r2 > 0.99) and ruggedness.     

Detection of hydrogen isotope atoms by mass spectrometry combined with resonant ionization

We examined the application of mass spectrometric methods using resonant ionization by a tunable laser and proposed its use for analyzing hydrogen isotopes. We conducted resonance ionization mass spectrometry (RIMS) to detect gas-phase hydrogen isotope atoms. The ionization efficiency was increased by more than 1000 times that obtained with conventional methods using nonresonant ionization. Resonant laser ablation mass spectrometry (RLAMS) was applied for deuterium detection in solid samples. A graphite substrate implanted with deuterium was used for ordinary laser ablation mass spectrometry (LAMS) and RLAMS. The deuterium signal was observed very clearly by RLAMS, in contrast to LAMS. Mass spectrometry combined with resonance ionization was very useful for hydrogen isotope detection, because components with equal mass numbers were resolved and the method demonstrated higher ionization efficiency. Received: 4 November 1998 / Revised version: 12 January 1999 / Published online: 7 April 1999     

Field ionization mass spectrometry of organic compounds

A review is given on field ionization mass spectrometry of organic compounds. Four different subjects are treated and illustrated by means of significant examples: Experimental techniques, surface reactions induced by high electric fields, the kinetics of fast unimolecular decompositions of ions, and qualitative and quantitative analyses of organic compounds by field desorption methods.     

Dichloromethane as solvent and reagent: a case study of photoinduced reactions in mixed phosphonium‐iodonium ylide

Several years ago the photoinduced reaction of mixed phosphonium‐iodonium ylides ( 1 ) with acetylenes ( 2 ) to give λ⁵‐phosphinolines ( 3 ) and substituted furans ( 4 ) was described. This reaction is one‐pot, metal‐free synthesis of heterocycles 3 and 4 with the yields of 40% to 80%. The reaction proceeds only in dichloromethane (DCM) at the high ylide concentrations (>0.01 mol/L). The product analysis by ³¹P NMR, electrospray ionization mass spectrometry, UV‐vis spectrophotometry, and the dynamic light scattering study of the self‐aggregation of the ylide in DCM showed a dual role of the solvent in the photoinduced reactions of mixed phosphonium‐iodonium ylide: (i) at the low ylide concentrations (<0.01 mol/L), the conjugated photoinitiation of the chain reaction in DCM results in the formation of chlorine‐containing products and (ii) at the high ylide concentrations (>0.01 mol/L), the photolysis mechanism is determined by self‐organization of the ylide molecules to give large stable aggregates in DCM, in which the target heterocycles are synthesized. Two important issues follow from the study. First, the annulation reaction between mixed phosphonium‐iodonium ylide and acetylenes occurs only when the reactive intermediates are in close proximity to one other, and, second, DCM is not inert reagent in reactions occurring with participation of radicals and in one form or another can participate in photoinduced radical reactions of various solutes.     

Mass Spectrometry,Review of the Basics: Ionization

Abstract: Mass spectrometry (MS) has become an integral tool in life sciences. The first step in MS analysis is ion formation (ionization). Many ionization methods currently exist; electrospray ionization (ESI) and matrix-assisted laser desorption ionization (MALDI) are the most commonly used. ESI relies on the formation of charged droplets releasing ions from the surface (ion evaporation model) or via complete solvent evaporation (charge residual model). MALDI ionization, however, is facilitated via laser energy and the use of a matrix. Despite wide use, ESI cannot efficiently ionize nonpolar compounds. Atmospheric pressure chemical ionization (APCI) and atmospheric pressure photo ionization (APPI) are better suited for such tasks. APPI requires photon energy and a dopant, whereas APCI is similar to chemical ionization. In 2004, ambient MS was introduced in which ionization occurs at the sample in its native form. Desorption electrospray ionization (DESI) and direct analysis in real time (DART) are the most widely used methods. In this mini-review, we provide an overview of the main ionization methods and the mechanisms of ion formation. This article is educational and intended for students/researchers who are not very familiar with MS and would like to learn the basics; it is not for MS experts.     

Probing the mechanisms of ambient ionization by laser-induced fluorescence spectroscopy

The ionization mechanisms of several atmospheric pressure ion sources based on desorption and ionization of samples deposited on a surface were studied. Home-built desorption electrospray ionization (DESI), laserspray ionization (LSI), and atmospheric pressure matrix-assisted laser desorption/ionization (AP-MALDI) sources were characterized using low-molecular-weight compounds, in particular fluorescent dyes. Detection of the desorbed and ionized species was performed by laser-induced fluorescence and ion cyclotron resonance mass spectrometry. The dependences of the signal intensities on various experimental parameters were studied. The data obtained reveals common features, such as formation of solvated species and clusters in the ionization processes, in all of the techniques considered.     

Formation of macrocyclic oligoferrocenes: a matrix-assisted laser desorption/ionization mass spectrometric study

Oligomeric ferrocenes were investigated simultaneously by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOFMS). The oligomers were obtained by the reaction of tetrahydro-4,4,8,8-tetramethyl-4,8-disila-s-indacene-3a,7a-diyldilithium (Li(2)L) with FeCl(2).1.5 THF (THF = tetrahydrofuran). Depending on the reaction conditions up to ten linear-chain and eleven cyclic ferrocene oligomers with masses between 1139 and 5071 Da could be detected unambiguously. The most abundant macrocycles contained ten and seven iron atoms when the reactions were carried out at -20 and 25 degrees C, respectively. The chains had cyclopentadienes as end groups and formally resulted from replacing one iron of a cycle by two hydrogens, which corresponds to a mass difference of 54 Da. Copyright 1999 John Wiley & Sons, Ltd.     

Formation of oligomeric alkenylperoxides during the oxidation of unsaturated fatty acids: an electrospray ionization tandem mass spectrometry study

This study reports the identification of oligomeric alkenylperoxides by electrospray ionization mass spectrometry (ESI-MS) and tandem mass spectrometry (ESI-MS(2)), during the oxidation of oleic, linoleic and linolenic acids with Fenton's (Fe(2+)/H(2)O(2)) and Fe(2+)/O(2) systems. The reactions were followed by ferrous oxidation-xylenol orange method together with GC-MS and GC-FID, allowing to observe that both oxidation systems are different in terms of hydroperoxide evolution, probably due to the presence of different intermediate reactive species: perferryl ion and OH(·) radical responsible for the decomposition of lipid hydroperoxides and formation of new compounds. The analysis of ESI-MS in the negative mode, obtained after oxidation of each fatty acid, confirmed the presence of the monomeric oxidation products together with other compounds at high mass region above m/z 550. These new ions were attributed to oligomeric structures, identified by the fragmentation pathways observed in the tandem mass spectra.     

The effect of high power ultrasound on an aqueous suspension of graphite

Ultrasound treatment was used to study the decrease of the granulometry of graphite, due to the cavitation, which allows the erosion by separating grains. At a smaller scale, cavitation bubble implosion tears apart graphite sheets as shown by HRTEM, while HO and H radicals produced from water sonolysis, generate oxidative and reductive reactions on these sheet fragments. Such reactions form smaller species, e.g. dissolved organic matter. The methodology proposed is very sensitive to unambiguously identifying the in situ composition of organic compounds in water. The use of the atmospheric pressure chemical ionization (APCI) Fourier transform mass spectrometry (FTMS) technique minimizes the perturbation of the organic composition and does not require chemical treatment for analysis. The structural features observed in the narrow range (m/z < 300) were mainly aromatic compounds (phenol, benzene, toluene, xylene, benzenediazonium, etc.), C₄–C₆ alkenes and C₂–C₁₀ carboxylic acids. Synthesis of small compounds from graphite sonication has never been reported and will probably be helpful to understand the mechanisms involved in high energy radical reactions.     

532nm及355nm丁酮多光子电离质谱研究

利用激光质谱法,采用355 nm及532 nm激光作为光源对丁酮分子进行了多光子电离解离研究,得到了2种波长下丁酮的多光子电离飞行时间质谱图主要有质荷比为1(H ),15(CH3 ),43(CH3CO )的质谱峰.532 nm质谱比较丰富,有较强的质荷比为45的信号,可以认为这是丁酮异构体电离解离得到的产物;同时探测到了质荷比为4,6,8的信号,可能是高价离子.355 nm质谱图相对简单.根据信号比例随激光能量的变化及主要的离子信号,得出了2种波长下主要的解离电离通道.     

双聚焦扇型磁式高分辨ICP-MS在人体铁稳定同位素示踪研究中的应用

铁营养学研究是解决我国普遍存在的缺铁性贫血的关键环节 ,铁及其同位素比值测定方法是铁营养学研究的基础。人们传统地采用放射性同位素示踪法、中子活化法、热电离质谱法等作为铁营养学研究的辅助手段。该工作使用扇型磁式双聚焦高分辨ICP MS测定食品和粪便样品中铁同位素比值 ,用 30 0 0分辨率以避免40 Ar1 6O ,40 Ar1 4 N对56Fe ,54Fe的干扰 ,以快速多次电扫描方式降低等离子体波动的影响 ,以 5 μg·mL-1Fe标准溶液多次测定 ,统计计算得出54Fe/56Fe ,57Fe/56Fe和58Fe/56Fe等同位素比值测量精度分别为 0 2 3,0 1 4 ,0 2 2 % ,方法准确可靠、简便快速、已应用于铁营养学研究中。     

532 nm及355 nm丁酮多光子电离质谱研究

利用激光质谱法,采用355 nm及532 nm激光作为光源对丁酮分子进行了多光子电离解离研究,得到了2种波长下丁酮的多光子电离飞行时间质谱图主要有质荷比为1(H ),15(CH3 ),43(CH3CO )的质谱峰.532 nm质谱比较丰富,有较强的质荷比为45的信号,可以认为这是丁酮异构体电离解离得到的产物;同时探测到了质荷比为4,6,8的信号,可能是高价离子.355 nm质谱图相对简单.根据信号比例随激光能量的变化及主要的离子信号,得出了2种波长下主要的解离电离通道.     

Fast Atom BombardmenUMass Spectrometry (FABMS) and Its Industrial Applications

Abstract

“Soft ionization” techniques which permit direct desorptton of gasphase analyte ions without the need for vaporization have greatly expanded the potential applications of mass spectrometry (MS). By using such techniques as field desorption (FD), desorption chemical ionization (DCI), and fast atom bombardment (FAB), thermally labile and higher molecular weight compounds are now amenable to MS exambation without significant thermal degradation. This ability to ionize higher molecular weight species has been paralleled by high field, inhomogeneous magnet development, allowing magnetic sector mass spectrometers to reach 10,000ν at full accelerating voltage. These advancements in ionization techniques and instrument design now permit useful MS data for organic compounds of several thousand molecular weight to be produced on a near routine basis in many laboratories.     

甲胺分子共振增强多光子电离的波长依赖性

使用激光多光子电离质谱技术，研究了甲胺分子在４２５ｎｍ－４９５ｎｍ波长范围内共振增强多光子电离碎裂过程，记录了母体离子和与碎片离子产额与波长的依赖关系。由于共振增强多光子电离母体离子与碎片离子谱的相似性，可用探测总离子信号的方法来替代单独的母离子探测，有效地提高痕量探测的灵敏度。     

Mass spectrometry of rhenium complexes: a comparative study by using LDI-MS, MALDI-MS, PESI-MS and ESI-MS

A group of rhenium (I) complexes including in their structure ligands such as CF(3)SO(3)-, CH(3)CO(2)-, CO, 2,2'-bipyridine, dipyridil[3,2-a:2'3'-c]phenazine, naphthalene-2-carboxylate, anthracene-9-carboxylate, pyrene-1-carboxylate and 1,10-phenanthroline have been studied for the first time by mass spectrometry. The probe electrospray ionization (PESI) is a technique based on electrospray ionization (ESI) that generates electrospray from the tip of a solid metal needle. In this work, mass spectra for organometallic complexes obtained by PESI were compared with those obtained by classical ESI and high flow rate electrospray ionization assisted by corona discharge (HF-ESI-CD), an ideal method to avoid decomposition of the complexes and to induce their oxidation to yield intact molecular cation radicals in gas state [M](+·) and to produce their reduction yielding the gas species [M](-·). It was found that both techniques showed in general the intact molecular ions of the organometallics studied and provided additional structure characteristic diagnostic fragments. As the rhenium complexes studied in the present work showed strong absorption in the UV-visible region, particularly at 355?nm, laser desorption ionization (LDI) mass spectrometry experiments could be conducted. Although intact molecular ions could be detected in a few cases, LDI mass spectra showed diagnostic fragments for characterization of the complexes structure. Furthermore, matrix-assisted laser desorption ionization (MALDI) mass spectra were obtained. Nor-harmane, a compound with basic character, was used as matrix, and the intact molecular ions were detected in two examples, in negative ion mode as the [M](-·) species. Results obtained with 2-[(2E)-3-(4-tert-buthylphenyl)-2-methylprop-2-enylidene] malononitrile (DCTB) as matrix are also described. LDI experiments provided more information about the rhenium complex structures than did the MALDI ones.     

喷气Z箍缩负载的质量线密度确定

 喷气Z箍缩的负载参数（如质量线密度及半径）必须和脉冲驱动源的电流（幅值和上升时间）相匹配。作者利用微型快速电离规测量了喷气Z箍缩中超音速喷嘴产生的气体负载的密度分布，并由此得到了负载质量线密度为43μg/cm，这符合原定的喷嘴设计指标。     

Silicon nitride nanoparticles for surface-assisted laser desorption/ionization of small molecules

Conventional matrix-assisted laser desorption/ionization mass spectrometry is limited to analyses of higher molecular weight compounds due to high background noise generated by the matrix in the lower mass region. Surface-assisted laser desorption/ionization (SALDI) mass spectrometry is an alternative solution to this problem. Nanoparticles, structured silicon surfaces and carbon allotropes are commonly used as SALDI surfaces. Here, for the first time, we demonstrate the application of silicon nitride nanoparticles as a suitable medium for laser desorption/ionization of small drug molecules.