A novel sodium carboxymethylcellulose/poly(N‐isopropylacrylamide)/Clay semi‐IPN nanocomposite hydrogel with improved response rate and mechanical properties

A novel semi‐IPN nanocomposite hydrogel (CMC/PNIPA/Clay hydrogel) based on linear sodium carboxymethylcellulose (CMC) and poly(N‐isopropylacrylamide) (PNIPA) crosslinked by inorganic clay was prepared. The structure and morphology of these hydrogels were investigated and their swelling and deswelling kinetics were studied in detail. TEM images showed that the clay was substantially exfoliated to form nano‐dimension platelets dispersed homogeneously in the hydrogels and acted as a multifunctional crosslinker. The CMC/PNIPA/Clay hydrogels swell faster than the corresponding PNIPA/Clay hydrogels at pH 7.4, whereas they swell slower than the PNIPA/Clay hydrogels at pH 1.2. The CMC/PNIPA/Clay nanocomposite hydrogels showed much higher deswelling rates, which was ascribed to more passway formed in these hydrogels for water to diffuse in and out. The deswelling process of the hydrogels could be approximately described by the first‐order kinetic equation and the deswelling rate decreased with increasing clay content. The mechanical properties of the CMC/PNIPA/Clay nanocomposite hydrogels were analyzed based on the theory of rubber elasticity. It was found that with increasing clay content, the effective crosslink chain density, v_e, increased whereas the molecular weight of the chains between crosslinks M_c decreased. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1546–1555, 2008     

Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels

Three series of semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve the mechanical properties of PNIPA gels. The effect of the incorporation of linear polymers into responsive networks on the temperature‐induced transition, swelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with various molar ratios (25:1 to 100:1) of the monomer (N‐isopropyl acrylamide) to the crosslinker (methylenebisacrylamide). The hydrogels were characterized by the determination of the equilibrium degree of swelling at 25 °C, the compression modulus, and the effective crosslinking density, as well as the ultimate hydrogel properties, such as the tensile strength and elongation at break. The introduction of cationic and anionic linear hydrophilic PAAm into PNIPA networks increased the rate of swelling, whereas the presence of nonionic PAAm diminished it. Transition temperatures were significantly affected by both the crosslinking density and the presence of linear PAAm in the hydrogel networks. Although anionic PAAm had the greatest influence on increasing the transition temperature, the presence of nonionic PAAm caused the highest dimensional change. Semi‐interpenetrating polymer networks reinforced with cationic and nonionic PAAm exhibited higher tensile strengths and elongations at break than PNIPA hydrogels, whereas the presence of anionic PAAm caused a reduction in the mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3987–3999, 2004     

Uniform Mesoporous Silica Hexagon and Its Two‐Dimensional Colloidal Crystal

Well‐ordered mesoporous silica nanoparticles with uniform hexagonal disk shapes are synthesized under dilute alkaline conditions with a two‐step process, separating the nucleation and growth process. The resulting monodisperse hexagons can be arranged in a 2‐dimensional (2D) ordered periodical super‐structure. The hexagonal symmetry is similar in both scales. A statistical mechanical cell model is applied to analyze consequences of the interesting packing structure, including osmotic bulk modulus, phase separation and defects.     

Thermoresponsive poly(N-isopropylacrylamide) nanogels/poly(acrylamide) nanostructured hydrogels

Here we report the preparation and characterization of nanostructured thermo-responsive poly(acrylamide) (PAM)-based hydrogels. The addition of slightly crosslinked poly(N-isopropylacrylamide) (PNIPA) nanogels to AM reactive aqueous solution produces nanostructured hydrogels that exhibit a volume phase transition temperature (T_VPT). Their swelling kinetics, T_VPT's and mechanical properties at the equilibrium-swollen state (H_eq) are investigated as a function of the concentration of PNIPA nanogels in the nanostructured hydrogels. Nanostructured hydrogels with PNIPA nanogels/AM mass ratios of 20/80 and above exhibit higher H_eq and longer time to reach the equilibrium swelling than those of the conventional PAM hydrogels. However, the PNIPA nanogels possess thermo-responsive character missing in conventional PAM hydrogels. The T_VPT of nanostructured hydrogels depends on PNIPA nanogel content but their elastic and Young moduli are larger than those of conventional hydrogels at similar swelling ratios. Swelling kinetics, T_VPT, and mechanical properties are explained in terms of the controlled in-homogeneities introduced by the PNIPA nanogels during the polymerization.     

Direct Assembly of Mesoporous Silica Functionalized with Polypeptides for Efficient Dye Adsorption

Herein, we introduce a new polypeptide‐functionalized mesoporous silica template fabricated from a biodegradable poly(ethylene oxide‐b‐?‐caprolactone) (PEO‐b‐PCL) diblock copolymer and a poly(tyrosine) (PTyr) biopolymer. The crystallization behavior of the PEO‐b‐PCL diblock copolymer changes after blending, but the secondary structure of PTry remains stable. After selective solvent extraction in THF, the PEO‐b‐PCL is removed, but PTyr remains within the silica matrix due to its different solubility. Fourier‐transform IR spectroscopic analysis (FTIR), thermal gravitometry analysis (TGA), small‐angle X‐ray scattering (SAXS), and X‐ray diffraction (XRD) studies confirm the retention of PTyr to form a polypeptide‐functionalized mesoporous material. The adsorption of methylene blue hydrate (MB) from aqueous solution into the polypeptide‐functionalized mesoporous silica is investigated, thus revealing that the nanocomposite exhibits a high adsorption capacity relative to pure silica due to hydrogen‐bonding interactions between the hydroxy phenolic group of PTyr and the N‐containing aromatic ring from MB.     

Facile Synthesis of Boronic Acid‐Functionalized Magnetic Mesoporous Silica Nanocomposites for Highly Specific Enrichment of Glycopeptides

In the work, aminophenylboronic acid (APB)‐functionalized magnetic mesoporous silica, which holds the attractive features of high magnetic responsivity and large surface area, was developed to enrich glycopeptides. At first, magnetic mesoporous silica nanocomposites were prepared. And then, the nanocomposites were functioned with glycidoxypropyltrimethoxysilane (GLYMO) for boronic acid immobilization. Due to that the boronic acid group on the surface of magnetic mesoporous silica nanocomposites can form tight yet reversible covalent bond with glycopeptides containing cis‐1,2‐diols groups, the magnetic mesoporous silica nanocomposites were successfully applied to selective enrichment of glycopeptides. APB functionalized magnetic mesoporous silica was also demonstrated to have high selectivity for the glycopeptides in the presence of a 10‐fold excess bovine serum albumin (BSA) over horseradish peroxidase (HRP) in the tryptic digest. We also find that magnetic mesoporous silica has better sensitivity in HRP digest compared with that of commercial aminophenylboronic acid‐functionalized magnetic nanoparticles beads. The limit of detection for glycopeptides from glycoprotein HRP is about 0.01 ng/µL.     

Synthesis of Olive‐Shaped Mesoporous Platinum Nanoparticles (MPNs) with a Hard‐Templating Method Using Mesoporous Silica (SBA‐15)

Well‐ordered mesoporous Pt nanoparticles (MPNs) with uniform olive shapes are synthesized by using two‐dimensional (2D) hexagonal mesoporous silica (SBA‐15) as a hard template. The average particle sizes are controllable in the range of 150 to 230 nm by changing the reduction time. Low‐angle XRD profiles for the obtained MPNs show three distinct peaks assignable to the (10), (11), and (20) planes of a highly ordered 2D hexagonal symmetry. From high‐magnification SEM images, periodically arranged Pt nanowires are observed clearly, which are a negative replica of the 2D hexagonally ordered mesoporous silica (SBA‐15). Furthermore, the single crystallinity of the Pt fcc structure coherently extends over the whole particles. As a result of such unique character as well as high surface area, the obtained MPNs show distinctly enhanced electrocatalytic properties for methanol oxidation reaction compared to other Pt samples, such as Pt black.     

Electrochemical Characteristics of Discrete,Uniform, and Monodispersed Hollow Mesoporous Carbon Spheres in Double‐Layered Supercapacitors

Core–shell‐structured mesoporous silica spheres were prepared by using n‐octadecyltrimethoxysilane (C18TMS) as the surfactant. Hollow mesoporous carbon spheres with controllable diameters were fabricated from core–shell‐structured mesoporous silica sphere templates by chemical vapor deposition (CVD). By controlling the thickness of the silica shell, hollow carbon spheres (HCSs) with different diameters can be obtained. The use of ethylene as the carbon precursor in the CVD process produces the materials in a single step without the need to remove the surfactant. The mechanism of formation and the role played by the surfactant, C18TMS, are investigated. The materials have large potential in double‐layer supercapacitors, and their electrochemical properties were determined. HCSs with thicker mesoporous shells possess a larger surface area, which in turn increases their electrochemical capacitance. The samples prepared at a lower temperature also exhibit increased capacitance as a result of the Brunauer–Emmett–Teller (BET) area and larger pore size.     

Dual Soft‐Template System Based on Colloidal Chemistry for the Synthesis of Hollow Mesoporous Silica Nanoparticles

A new dual soft‐template system comprising the asymmetric triblock copolymer poly(styrene‐b‐2‐vinyl pyridine‐b‐ethylene oxide) (PS‐b‐P2VP‐b‐PEO) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) is used to synthesize hollow mesoporous silica (HMS) nanoparticles with a center void of around 17 nm. The stable PS‐b‐P2VP‐b‐PEO polymeric micelle serves as a template to form the hollow interior, while the CTAB surfactant serves as a template to form mesopores in the shells. The P2VP blocks on the polymeric micelles can interact with positively charged CTA⁺ ions via negatively charged hydrolyzed silica species. Thus, dual soft‐templates clearly have different roles for the preparation of the HMS nanoparticles. Interestingly, the thicknesses of the mesoporous shell are tunable by varying the amounts of TEOS and CTAB. This study provides new insight on the preparation of mesoporous materials based on colloidal chemistry.     

Three‐Dimensional Ultralarge‐Pore Ia3d Mesoporous Silica with Various Pore Diameters and Their Application in Biomolecule Immobilization

Highly ordered mesoporous three‐dimensional Ia3d silica (KIT‐6) with different pore diameters has been synthesized by using pluronic P123 as surfactant template and n‐butanol as cosolvent at different synthesis temperatures in a highly acidic medium. The materials were characterized by XRD and N₂ adsorption. The synthesis temperature plays a significant role in controlling the pore diameter, surface area, and pore volume of the materials. The material prepared at 150 °C, KIT‐6‐150, has a large pore diameter (11.3 nm) and a high specific pore volume (1.53 cm³ g^?1). We also demonstrate immobilization of lysozyme, which is a stable and hard protein, on KIT‐6 materials with different pore diameters. The amount of lysozyme adsorbed on large‐pore KIT‐6 is extremely large (57.2 μmol g^?1) and is much higher than that observed for mesoporous silicas MCM‐41, SBA‐15, and KIT‐5, mesoporous carbons, and carbon nanocages. The effect of various parameters such as buffer concentration, adsorption temperature, concentration of the lysozyme, and the textural parameter of the adsorbent on the lysozyme adsorption capacity of KIT‐6 was studied. The amount adsorbed mainly depends on solution pH, ionic strength, adsorption temperature, and pore volume and pore diameter of the adsorbent. The mechanism of adsorption on KIT‐6 under different adsorption conditions is discussed. In addition, the structural stability of lysozyme molecules and the KIT‐6 adsorbent before and after adsorption were investigated by XRD, nitrogen adsorption, and FTIR spectroscopy.     

Gemini Surfactants Templated Mesoporous Silica Microparticles: from Solid to Hollow Mesoporous Spheres

We synthesized a series of mesoporous silica microparticles (MSs) using cationic gemini surfactants C_14–2‐n (n = 2, 6, 10, 14) as templates. The porous structures and pore size of these MSs can be tuned by varying the length of alkyl chain in gemini surfactant templates. These MSs showed effective doxorubicin (DOX) loading and a pH‐responsive drug release characteristics. These results indicate that the MSs, especially the hollow mesoporous silica nanoparticles, have great potential for biomedical applications.     

半晶化双螺旋介孔MnO2的合成和电化学性质

Mesoporous silica KIT-6 has novel three-dimensional gyroidal channel structure, space group of 1a-3d, and ordered tunable pores up to 10 nm. In this paper, such mesostructured silica was employed as hard template to prepare semicrystalline gyroidal mesoporous MnO2. The structure was investigated by XRD, TEM and HRTEM, and found to be of high quality 1a-3d symmetry, in good accordance with the template structure. The material has a BET surface of 118 m2·g^-1 and pore volume of 0.35 cm3·g^- 1 after eliminating template. Mesoporous MnO2 has shown good electrochemical property as supercapacitor material in 1 mol·L^-1 Na2SO4 and 1 mol·L^-1 LiClO4 solutions, but interesting pseudocapacitance behavior was observed in the case of 6 mol·L^-1 KOH. It was found that mesoporous MnO2 performed stable reversible electrochemical behavior with capacitance of 220 F·g^-1 in a potential range of -0.1-0.55 V vs. Hg/HgO in alkaline solution, demonstrating that it is a promising novel electrode material for the fabrication of electrochemical capacitors.     

A Mesoporous Superlattice Consisting of Alternately Stacking Interstitial Nanospace within Binary Silica Colloidal Crystals

A novel class of nonclassical structures of mesoporous silica, namely a binary nanoparticle mesoporous superlattice (BNMS), is obtained by the assembly of silica nanospheres of different sizes into a binary colloidal crystal. The colloidal crystal has a CrB‐type structure and consists of alternate stacks of unary fcc and binary AlB₂‐type structures along the b axis and has four types of interstitial mesopores. The BNMS can be deposited on a substrate by dip coating to form an oriented thin film in which the direction of the superstructure (b axis) is perpendicular to the substrate.     

Prototype of Low Thermal Expansion Materials: Fabrication of Mesoporous Silica/Polymer Composites with Densely Filled Polymer inside Mesopore Space

A prototype of novel low thermal expansion materials using mesoporous silica particles is demonstrated. Mesoporous silica/polymer composites with densely filled polymer inside the mesopore space are fabricated by mechanically mixing both organically modified mesoporous silica and epoxy polymer. The mesopores are easily penetrated by polymers as a result of the capillary force during the mechanical composite processing. Furthermore, we propose a new model of polymer mobility restriction using mesoporous silica with a large pore space. The robust inorganic frameworks covering the polymer effectively restrict the polymer mobility against thermal energy. As a result, the degree of total thermal expansion of the composites is drastically decreased. From the mass‐normalized thermal mechanical analysis (TMA) charts of various composites with different amounts of mesoporous silica particles, it is observed that the coefficient of thermal expansion (CTE) values gradually increase with an increase of the polymer amount outside the mesopores. It is proven that the CTE values in the range over the glass‐transition temperatures (T_g) are perfectly proportional to the outside polymer amounts. Importantly, the Y‐intercept of the relation equation obtained by a least‐square method is the CTE value and is almost zero. This means that thermal expansion does not occur if no polymers are outside the mesopores. Through such a quantative discussion, we clarify that only the outside polymer affects the thermal expansion of the composites, that is, the embedded polymers inside the mesopores do not expand at all during the thermal treatment.     

A Rational Repeating Template Method for Synthesis of 2 D Hexagonally Ordered Mesoporous Precious Metals

A repeating template method is presented for the synthesis of mesoporous metals with 2D hexagonal mesostructures. First, a silica replica (i.e., silica nanorods arranged periodically) is prepared by using 2D hexagonally ordered mesoporous carbon as the template. After that, the obtained silica replica is used as the second template for the preparation of mesoporous ruthenium. After the ruthenium species are introduced into the silica replica, the ruthenium species are then reduced by a vapor‐infiltration method by using the reducing agent dimethylamine borane. After the ruthenium deposition, the silica is chemically removed. Analysis by transmission and scanning electron microscopies, a nitrogen‐adsorption–desorption isotherm, and small‐angle X‐ray scattering revealed that the mesoporous ruthenium had a 2D hexagonal mesostructure, although the mesostructural ordering is decreased compared to that of the original mesoporous carbon template. This method is widely applicable to other metal systems. By changing the metal species introduced into the silica replica, several mesoporous metals (palladium and platinum) can be synthesized. Ordered mesoporous ruthenium and palladium, which are not easily attainable by the soft‐templating methods, can be prepared. This study has overcome the composition variation limitations of the soft‐templating method.     

Preparation and characterization of pH- and temperature-responsive semi-IPN hydrogels of carboxymethyl chitosan with poly (<Emphasis Type="Italic">N</Emphasis>-isopropyl acrylamide) crosslinked by clay

A new kind of pH- and temperature-responsive semi-interpenetrating polymer network hydrogel based on linear carboxymethylchitosan (CMCS) and poly (N-isopropylacrylamide) (PNIPA) crosslinked by inorganic clay was prepared. The pH-and temperature-responsive behaviors, the deswelling kinetics, and the mechanical properties of the hydrogel were investigated. The hydrogels exhibited a volume phase transition temperature around 33 °C with no significant deviation from the conventional PNIPA hydrogels. The results of the influence of pH value on the swelling behaviors showed that the minimum swelling ratios of the hydrogels appeared near the isoelectric point (IEP) of CMCS, and when pH deviated from the IEP, the hydrogels behaved as polycations or polyanions. The novel hydrogels had much higher response rate than the conventional CMCS/PNIPA hydrogels. Moreover, the semi-IPN hydrogels crosslinked by clay could be elongated to more than 800% and the elongation could be recovered almost completely and instantaneously.     

Electrochemical Behavior of o‐Nitrophenol at Hexagonal Mesoporous Silica Modified Carbon Paste Electrodes

A hexagonal mesoporous silica (HMS) modified carbon paste electrode (CPE) was fabricated and characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods (ferrocene as a probe). The electrochemical behavior of nitrophenol (o‐NP) at the HMS modified electrode (HMSCPE) was investigated. Compared with CPE, a well‐defined reduction peak and a remarkably peak current response was observed. It is indicated that mesoporous HMS exhibited remarkable enhancement effects on the electrochemical reduction of o‐NP. The electrochemical reduction mechanism was also discussed. Consequently, a simple and sensitive electrochemical method was proposed for the determination of o‐NP, which was used to determine o‐NP in waste water samples.     

Rapid preparation of methyltrimethoxy‐modified magnetic mesoporous silica as an effective solid‐phase extraction adsorbent

A time‐saving method was applied to synthesize methyltrimethoxy‐modified magnetic mesoporous silica with or without p‐toluenesulfonic acid as the catalyst for magnetic solid‐phase extraction. The synthesized materials were systematically characterized. Results demonstrated that methyltrimethoxy modified magnetic mesoporous silica with p‐toluenesulfonic acid as the catalyst has a relatively smaller aperture and extreme hydrophobicity (water contact angle of 135°). To evaluate the feasibility of these prepared materials as effective adsorbents, it was combined with gas chromatography and electron capture detection to determine 26 polychlorinated biphenyls in environmental water. The result revealed that methyltrimethoxy modified magnetic mesoporous silica with p‐toluenesulfonic acid as the catalyst had the best extraction efficiency and recovery. Under the optimized extracted conditions, the proposed method showed good linearity within the concentration range of 5 to 200 ng/L with correlation coefficients of 0.9969 to 0.9999. The limits of detection and quantification based on signal‐to‐noise ratios of 3 and 10 were in the range of 0.16 to 0.91 and 0.52 to 3.0 ng/L, respectively. The polychlorinated biphenyl concentrations in environmental water samples were successfully determined using the developed method. PCB008 and PCB110 were 4.05 and 8.52 ng/L in Red‐Star lake water (Hubei Province, China), respectively.     

A Hierarchical MFI Zeolite with a Two‐Dimensional Square Mesostructure

A conceptual design and synthesis of ordered mesoporous zeolites is a challenging research subject in material science. Several seminal articles report that one‐dimensional (1D) mesostructured lamellar zeolites are possibly directed by sheet‐assembly of surfactants, which collapse after removal of intercalated surfactants. However, except for one example of two‐dimensional (2D) hexagonal mesoporous zeolite, no other zeolites with ordered 2D or three‐dimensional (3D) mesostructures have been reported. An ordered 2D mesoporous zeolite can be templated by a cylindrical assembly unit with specific interactions in the hydrophobic part. A template molecule with azobenzene in the hydrophobic tail and diquaternary ammonium in the hydrophilic head group directs hierarchical MFI zeolite with a 2D square mesostructure. The material has an elongated octahedral morphology, and quaternary, ordered, straight, square channels framed by MFI thin sheets expanded along the a–c planes and joined with 90° rotations. The structural matching between the cylindrical assembly unit and zeolite framework is crucial for mesostructure construction.     

Exploring meso-/microporous composite molecular sieves with core-shell structures

A series of core–shell‐structured composite molecular sieves comprising zeolite single crystals (i.e., ZSM‐5) as a core and ordered mesoporous silica as a shell were synthesized by means of a surfactant‐directed sol–gel process in basic medium by using cetyltrimethylammonium bromide (CTAB) as a template and tetraethylorthosilicate (TEOS) as silica precursor. Through this coating method, uniform mesoporous silica shells closely grow around the anisotropic zeolite single crystals, the shell thickness of which can easily be tuned in the range of 15–100 nm by changing the ratio of TEOS/zeolite. The obtained composite molecular sieves have compact meso‐/micropore junctions that form a hierarchical pore structure from ordered mesopore channels (2.4–3.0 nm in diameter) to zeolite micropores (≈0.51 nm). The short‐time kinetic diffusion efficiency of benzene molecules within pristine ZSM‐5 (≈7.88×10^?19 m² s^?1) is almost retainable after covering with 75 nm‐thick mesoporous silica shells (≈7.25×10^?19 m² s^?1), which reflects the greatly opened junctions between closely connected mesopores (shell) and micropores (core). The core–shell composite shows greatly enhanced adsorption capacity (≈1.35 mmol g^?1) for large molecules such as 1,3,5‐triisopropylbenzene relative to that of pristine ZSM‐5 (≈0.4 mmol g^?1) owing to the mesoporous silica shells. When Al species are introduced during the coating process, the core–shell composite molecular sieves demonstrate a graded acidity distribution from weak acidity of mesopores (predominant Lewis acid sites) to accessible strong acidity of zeolite cores (Lewis and Brønsted acid sites). The probe catalytic cracking reaction of n‐dodecane shows the superiority of the unique core–shell structure over pristine ZSM‐5. Insight into the core–shell composite structure with hierarchical pore and graded acidity distribution show great potential for petroleum catalytic processes.