A Molecular Pillar Approach To Grow Vertical Covalent Organic Framework Nanosheets on Graphene: Hybrid Materials for Energy Storage

Hybrid 2D–2D materials composed of perpendicularly oriented covalent organic frameworks (COFs) and graphene were prepared and tested for energy storage applications. Diboronic acid molecules covalently attached to graphene oxide (GO) were used as nucleation sites for directing vertical growth of COF‐1 nanosheets (v‐COF‐GO). The hybrid material has a forest of COF‐1 nanosheets with a thickness of 3 to 15 nm in edge‐on orientation relative to GO. The reaction performed without molecular pillars resulted in uncontrollable growth of thick COF‐1 platelets parallel to the surface of GO. The v‐COF‐GO was converted into a conductive carbon material preserving the nanostructure of precursor with ultrathin porous carbon nanosheets grafted to graphene in edge‐on orientation. It was demonstrated as a high‐performance electrode material for supercapacitors. The molecular pillar approach can be used for preparation of many other 2D‐2D materials with control of their relative orientation.     

3D Microporous Base‐Functionalized Covalent Organic Frameworks for Size‐Selective Catalysis

The design and synthesis of 3D covalent organic frameworks (COFs) have been considered a challenge, and the demonstrated applications of 3D COFs have so far been limited to gas adsorption. Herein we describe the design and synthesis of two new 3D microporous base‐functionalized COFs, termed BF‐COF‐1 and BF‐COF‐2, by the use of a tetrahedral alkyl amine, 1,3,5,7‐tetraaminoadamantane (TAA), combined with 1,3,5‐triformylbenzene (TFB) or triformylphloroglucinol (TFP). As catalysts, both BF‐COFs showed remarkable conversion (96 % for BF‐COF‐1 and 98 % for BF‐COF‐2), high size selectivity, and good recyclability in base‐catalyzed Knoevenagel condensation reactions. This study suggests that porous functionalized 3D COFs could be a promising new class of shape‐selective catalysts.     

Two‐Dimensional Tetrathiafulvalene Covalent Organic Frameworks: Towards Latticed Conductive Organic Salts

The construction of a new class of covalent TTF lattice by integrating TTF units into two‐dimensional covalent organic frameworks (2D COFs) is reported. We explored a general strategy based on the C₂+C₂ topological diagram and applied to the synthesis of microporous and mesoporous TTF COFs. Structural resolutions revealed that both COFs consist of layered lattices with periodic TTF columns and tetragonal open nanochannels. The TTF columns offer predesigned pathways for high‐rate hole transport, predominate the HOMO and LUMO levels of the COFs, and are redox active to form organic salts that exhibit enhanced electric conductivity by several orders of magnitude. On the other hand, the linkers between the TTF units play a vital role in determining the carrier mobility and conductivity through the perturbation of 2D sheet conformation and interlayer distance. These results open a way towards designing a new type of TTF materials with stable and predesignable lattice structures for functional exploration.     

Rational Design of MOF/COF Hybrid Materials for Photocatalytic H2 Evolution in the Presence of Sacrificial Electron Donors

Crystalline and porous covalent organic frameworks (COFs) and metal‐organic frameworks (MOFs) materials have attracted enormous attention in the field of photocatalytic H₂ evolution due to their long‐range order structures, large surface areas, outstanding visible light absorbance, and tunable band gaps. In this work, we successfully integrated two‐dimensional (2D) COF with stable MOF. By covalently anchoring NH₂‐UiO‐66 onto the surface of TpPa‐1‐COF, a new type of MOF/COF hybrid materials with high surface area, porous framework, and high crystallinity was synthesized. The resulting hierarchical porous hybrid materials show efficient photocatalytic H₂ evolution under visible light irradiation. Especially, NH₂‐UiO‐66/TpPa‐1‐COF (4:6) exhibits the maximum photocatalytic H₂ evolution rate of 23.41 mmol g^?1 h^?1 (with the TOF of 402.36 h^?1), which is approximately 20 times higher than that of the parent TpPa‐1‐COF and the best performance photocatalyst for H₂ evolution among various MOF‐ and COF‐based photocatalysts.     

基于四硫富瓦烯的无金属共价有机框架材料用于高效电催化析氧反应

共价有机框架(COFs)在电催化析氧反应(OER)中的应用得到了广泛的关注。然而,大多数无金属共价有机框架(COFs)的导电性较差,不利于OER反应。四硫富瓦烯(TTF)是一种良好的电子供体,具有快速的电子转移能力,将TTF整合到共价有机框架骨架中将有助于电子的转移。在此,我们报道了一种基于四硫富瓦烯的二维无金属共价有机框架材料,JUC-630。与不含四硫富瓦烯的同类材料(Etta-Td COF)相比,JUC-630具有较低的过电位(400 mV)和塔菲尔斜率(104 mV∙dec⁻¹)。本研究提出了合理设计功能基元的策略,这有助于大大提高COF材料的OER催化活性。     

Vinylene‐Linked Covalent Organic Frameworks by Base‐Catalyzed Aldol Condensation

Two 2D covalent organic frameworks (COFs) linked by vinylene (?CH=CH?) groups (V‐COF‐1 and V‐COF‐2) are synthesized by exploiting the electron deficient nature of the aromatic s‐triazine unit of C₃‐symmetric 2,4,6‐trimethyl‐s‐triazine (TMT). The acidic terminal methyl hydrogens of TMT can easily be abstracted by a base, resulting in a stabilized carbanion, which further undergoes aldol condensation with multitopic aryl aldehydes to be reticulated into extended crystalline frameworks (V‐COFs). Both V‐COF‐1 (with terepthalaldehyde (TA)) and V‐COF‐2 (with 1,3,5‐tris(p‐formylphenyl)benzene (TFPB)) are polycrystalline and exhibit permanent porosity and BET surface areas of 1341 m² g^?1 and 627 m² g^?1, respectively. Owing to the close proximity (3.52 Å) of the pre‐organized vinylene linkages within adjacent 2D layers stacked in eclipsed fashion, [2+2] photo‐cycloadditon in V‐COF‐1 formed covalent crosslinks between the COF layers.     

Postsynthetic Functionalization of Three‐Dimensional Covalent Organic Frameworks for Selective Extraction of Lanthanide Ions

Chemical functionalization of covalent organic frameworks (COFs) is critical for tuning their properties and broadening their potential applications. However, the introduction of functional groups, especially to three‐dimensional (3D) COFs, still remains largely unexplored. Reported here is a general strategy for generating a 3D carboxy‐functionalized COF through postsynthetic modification of a hydroxy‐functionalized COF, and for the first time exploration of the 3D carboxy‐functionalized COF in the selective extraction of lanthanide ions. The obtained COF shows high crystallinity, good chemical stability, and large specific surface area. Furthermore, the carboxy‐functionalized COF displays high metal loading capacities together with excellent adsorption selectivity for Nd³⁺ over Sr²⁺ and Fe³⁺ as confirmed by the Langmuir adsorption isotherms and ideal adsorbed solution theory (IAST) calculations. This study not only provides a strategy for versatile functionalization of 3D COFs, but also opens a way to their use in environmentally related applications.     

2D and 3D Porphyrinic Covalent Organic Frameworks: The Influence of Dimensionality on Functionality

The construction of 2D and 3D covalent organic frameworks (COFs) from functional moieties for desired properties has gained much attention. However, the influence of COFs dimensionality on their functionalities, which can further assist in COF design, has never been explored. Now, by selecting designed precursors and topology diagrams, 2D and 3D porphyrinic COFs (2D‐PdPor‐COF and 3D‐PdPor‐COF) are synthesized. By model building and Rietveld refinement of powder X‐ray diffraction, 2D‐PdPor‐COF crystallizes as 2D sheets while 3D‐PdPor‐COF adopts a five‐fold interpenetrated pts topology. Interestingly, compared with 2D‐PdPor‐COF, 3D‐PdPor‐COF showed interesting properties, including 1) higher CO₂ adsorption capacity; 2) better photocatalytic performance; and 3) size‐selective photocatalysis. Based on this study, we believe that with the incorporation of functional moieties, the dimensionality of COFs can definitely influence their functionalities.     

An Olefin‐Linked Covalent Organic Framework as a Flexible Thin‐Film Electrode for a High‐Performance Micro‐Supercapacitor

Developing effective synthetic strategies as well as enriching functionalities for sp²‐carbon‐linked covalent organic frameworks (COFs) still remains a challenge. Now, taking advantage of a variant of Knoevenagel condensation, a new fully conjugated COF ( g‐C₃₄N₆‐COF ) linked by unsubstituted C=C bonds was synthesized. Integrating 3,5‐dicyano‐2,4,6‐trimethylpyridine and 1,3,5‐triazine units into the molecular framework leads to the enhanced π‐electron communication and electrochemical activity. This COF shows uniform nanofibrous morphology. By assembling it with carbon nanotubes, a flexible thin‐film electrode for a micro‐supercapacitor (MSC) can be easily obtained. The resultant COF‐based MSC shows an areal capacitance of up to 15.2 mF cm^?2, a high energy density of up to 7.3 mWh cm^?3, and remarkable rate capability. These values are among the highest for state‐of‐the‐art MSCs. Moreover, this device exhibits excellent flexibility and integration capability.     

Embedding Ultrasmall Au Clusters into the Pores of a Covalent Organic Framework for Enhanced Photostability and Photocatalytic Performance

Gold clusters loaded on various supports have been widely used in the fields of energy and biology. However, the poor photostability of Au clusters on support interfaces under prolonged illumination usually results in loss of catalytic performance. Covalent organic frameworks (COFs) with periodic and ultrasmall pore structures are ideal supports for dispersing and stabilizing Au clusters, although it is difficult to encapsulate Au clusters in the ultrasmall pores. In this study, a two‐dimensional (2D) COF modified with thiol chains in its pores was prepared. With ?SH groups as nucleation sites, Au nanoclusters (NCs) could grow in situ within the COF. The ultrasmall pores of the COF and the strong S?Au binding energy combine to improve the dispersibility of Au NCs under prolonged light illumination. Interestingly, Au–S–COF bridging as observed in this artificial Z‐scheme photocatalytic system is deemed to be an ideal means to increase charge‐separation efficiency.     

Fully Conjugated Two‐Dimensional sp2‐Carbon Covalent Organic Frameworks as Artificial Photosystem I with High Efficiency

The synthesis of fully conjugated sp²‐carbon covalent organic frameworks (COF) is extremely challenging given the difficulty of the formation of very stable carbon‐carbon double bonds (‐C=C‐). Here, we report the successful preparation of a 2D COF (TP‐COF) based on triazine as central planar units bridged by sp²‐carbon linkers through the ‐C=C‐ condensation reaction. High‐resolution‐transmission electron microscopy (HRTEM) clearly confirmed the tessellated hexagonal pore structure with a pore center‐to‐center distance of 2 nm. Powder X‐ray diffraction (PXRD) together with structural simulations revealed an AA stacking mode of the obtained layered structure. TP‐COF turned out to be an excellent semiconductor material with a LUMO energy of ?3.23 eV and a band gap of 2.36 eV. Excitingly, this novel sp²‐carbon conjugated TP‐COF exhibited unprecedented coenzyme regeneration efficiency and can significantly boost the coenzyme‐assisted synthesis of l ‐glutamate to a record‐breaking 97 % yield within 12 minutes.     

Two‐Dimensional Covalent Organic Frameworks for Carbon Dioxide Capture through Channel‐Wall Functionalization

Ordered open channels found in two‐dimensional covalent organic frameworks (2D COFs) could enable them to adsorb carbon dioxide. However, the frameworks’ dense layer architecture results in low porosity that has thus far restricted their potential for carbon dioxide adsorption. Here we report a strategy for converting a conventional 2D COF into an outstanding platform for carbon dioxide capture through channel‐wall functionalization. The dense layer structure enables the dense integration of functional groups on the channel walls, creating a new version of COFs with high capacity, reusability, selectivity, and separation productivity for flue gas. These results suggest that channel‐wall functional engineering could be a facile and powerful strategy to develop 2D COFs for high‐performance gas storage and separation.     

2D Poly(arylene vinylene) Covalent Organic Frameworks via Aldol Condensation of Trimethyltriazine

Designing structural order in electronically active organic solids remains a great challenge in the field of materials chemistry. Now, 2D poly(arylene vinylene)s prepared as highly crystalline covalent organic frameworks (COFs) by base‐catalyzed aldol condensation of trimethyltriazine with aromatic dialdehydes are reported. The synthesized polymers are highly emissive (quantum yield of up to 50 %), as commonly observed in their 1D analogues poly(phenylene vinylene)s. The inherent well‐defined porosity (surface area ca. 1000 m² g^?1, pore diameter ca. 11 Å for the terephthaldehyde derived COF‐1) and 2D structure of these COFs also present a new set of properties and are likely responsible for the emission color, which is sensitive to the environment. COF‐1 is highly hydrophilic and reveals a dramatic macroscopic structural reorganization that has not been previously observed in framework materials.     

A Covalent Organic Framework–Cadmium Sulfide Hybrid as a Prototype Photocatalyst for Visible‐Light‐Driven Hydrogen Production

CdS nanoparticles were deposited on a highly stable, two‐dimensional (2D) covalent organic framework (COF) matrix and the hybrid was tested for photocatalytic hydrogen production. The efficiency of CdS‐COF hybrid was investigated by varying the COF content. On the introduction of just 1 wt % of COF, a dramatic tenfold increase in the overall photocatalytic activity of the hybrid was observed. Among the various hybrids synthesized, that with 10 wt % COF, named CdS‐COF (90:10), was found to exhibit a steep H₂ production amounting to 3678 μmol h^?1 g^?1, which is significantly higher than that of bulk CdS particles (124 μmol h^?1 g^?1). The presence of a π‐conjugated backbone, high surface area, and occurrence of abundant 2D hetero‐interface highlight the usage of COF as an effective support for stabilizing the generated photoelectrons, thereby resulting in an efficient and high photocatalytic activity.     

Unravelling Crystal Structures of Covalent Organic Frameworks by Electron Diffraction Tomography

Featuring the art of covalent chemistry on 2D and 3D with molecular precision, covalent organic frameworks (COFs) have attracted immense interests from inorganic, organic, polymer, materials and energy chemistry. However, due to the synthetic challenge of “crystallization problem”, structural determination of COFs has been the bottle‐neck in speeding up their discovery and design, as well as building up their structure‐ property relation. Electron diffraction tomography (EDT) has been developed to determine crystal structures of COFs with only sub‐micrometer sized single crystals, which enabled the ab initio determination of crystal structure, molecular connectivity, pore metrics, and host‐guest interaction at the atomic level. In this review, we summarized the recent developments of EDT for addressing challenges in structure determinations of such e‐beam sensitive, organic porous crystals, covering comprehensively automatic data collection, low dose, cryogenic protocols, structural solution method, powder X‐ray diffraction refinement, and high‐resolution transmission electron microscopy (HRTEM) imaging techniques. We do believe the EDT will propel this field into the new era of COF chemistry with atomic precision, and we envision the wide application of artificial intelligence will promote the structural determination and particle analysis of COFs and related materials.     

Modulation of a Molecular π‐Electron System in a Purely Organic Conductor that Shows Hydrogen‐Bond‐Dynamics‐Based Switching of Conductivity and Magnetism

New important aspects of the hydrogen‐bond (H‐bond)‐dynamics‐based switching of electrical conductivity and magnetism in an H‐bonded, purely organic conductor crystal have been discovered by modulating its tetrathiafulvalene (TTF)‐based molecular π‐electron system by means of partial sulfur/selenium substitution. The prepared selenium analogue also showed a similar type of phase transition, induced by H‐bonded deuterium transfer followed by electron transfer between the H‐bonded TTF skeletons, and the resulting switching of the physical properties; however, subtle but critical differences due to sulfur/selenium substitution were detected in the electronic structure, phase transition nature, and switching function. A molecular‐level discussion based on the crystal structures shows that this chemical modification of the TTF skeleton influences not only its own π‐electronic structure and π–π interactions within the conducting layer, but also the H‐bond dynamics between the TTF π skeletons in the neighboring layers, which enables modulation of the interplay between the H‐bond and π electrons to cause such differences.     

Designed Synthesis of a 2D Porphyrin‐Based sp2 Carbon‐Conjugated Covalent Organic Framework for Heterogeneous Photocatalysis

The construction of stable covalent organic frameworks (COFs) for various applications is highly desirable. Herein, we report the synthesis of a novel two‐dimensional (2D) porphyrin‐based sp² carbon‐conjugated COF (Por‐sp²c‐COF), which adopts an eclipsed AA stacking structure with a Brunauer—Emmett—Teller surface area of 689 m² g^?1. Owing to the C=C linkages, Por‐sp²c‐COF shows a high chemical stability under various conditions, even under harsh conditions such as 9 m HCl and 9 m NaOH solutions. Interestingly, Por‐sp²c‐COF can be used as a metal‐free heterogeneous photocatalyst for the visible‐light‐induced aerobic oxidation of amines to imines. More importantly, in comparison to imine‐linked Por‐COF, the inherent structure of Por‐sp²c‐COF equips it with several advantages as a photocatalyst, including reusability and high photocatalytic performance. This clearly demonstrates that sp² carbon‐linked 2D COFs can provide an interesting platform for heterogeneous photocatalysis.     

Unveiling the Local Structure of Palladium Loaded into Imine‐Linked Layered Covalent Organic Frameworks for Cross‐Coupling Catalysis

Layered covalent organic frameworks (2D‐COFs), composed of reversible imine linkages and accessible pores, offer versatility for chemical modifications towards the development of catalytic materials. Nitrogen‐enriched COFs are good candidates for binding Pd species. Understanding the local structure of reacting Pd sites bonded to the COF pores is key to rationalize interactions between active sites and porous surfaces. By combining advanced synchrotron characterization methods with periodic computational DFT modeling, the precise atomic structure of catalytic Pd sites attached to local defects is resolved within an archetypical imine‐linked 2D‐COF. This material was synthesized using an in situ method as a gel, under which imine hydrolysis and metalation reactions are coupled. Local defects formed in situ within imine‐linked 2D‐COF materials are highly reactive towards Pd metalation, resulting in active materials for Suzuki–Miyaura cross‐coupling reactions.     

A 2D covalent organic framework with 4.7-nm pores and insight into its interlayer stacking

Two-dimensional layered covalent organic frameworks (2D COFs) organize π-electron systems into ordered structures ideal for exciton and charge transport and exhibit permanent porosity available for subsequent functionalization. A 2D COF with the largest pores reported to date was synthesized by condensing 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) and 4,4'-diphenylbutadiynebis(boronic acid) (DPB). The COF was prepared as both a high surface area microcrystalline powder as well as a vertically oriented thin film on a transparent single-layer graphene/fused silica substrate. Complementary molecular dynamics and density functional theory calculations provide insight into the interlayer spacing of the COF and suggest that adjacent layers are horizontally offset by 1.7-1.8 ?, in contrast to the eclipsed AA stacking typically proposed for these materials.     

pH-Dependent Slipping and Exfoliation of Layered Covalent Organic Framework

Layered/two-dimensional covalent organic frameworks (2D COF) are crystalline porous materials composed of light elements linked by strong covalent bonds. Interlayer force is one of the main factors directing the formation of a stacked layer structure, which plays a vital role in the stability, crystallinity, and porosity of layered COFs. The as-developed new way to modulate the interlayer force of imine-linked 2D TAPB-PDA-COF (TAPB = 1,3,5-tris(4-aminophenyl)benzene, PDA = terephthaldehyde) by only adjusting the pH of the solution. At alkaline and neutral pH, the pore size of the COF decreases from 34 Å due to the turbostratic effect. Under highly acidic conditions (pH 1), TAPB-PDA-COF shows a faster and stronger turbostratic effect, thus causing the 2D structure to exfoliate. This yields bulk quantities of an exfoliated few/single-layer 2D COF, which was well dispersed and displayed a clear Tyndall effect (TE). Furthermore, nanopipette-based electrochemical testing also confirms the slipping of layers with increase towards acidic pH. A model of pH-dependent layer slipping of TAPB-PDA-COF was proposed. This controllable pH-dependent change in the layer structure may open a new door for potential applications in controlled gas adsorption/desorption and drug loading/releasing.