Well‐Defined Models for the Elusive Dinuclear Intermediates of the Pauson–Khand Reaction

The mechanism of the Pauson–Khand reaction has attracted significant interest due to the unusual dinuclear nature of the Co₂(CO)_x active site. Experimental and computational data have indicated that the intermediates following the initial Co₂(CO)₆(alkyne) complex are thermodynamically unstable and do not build up in appreciable concentrations during the course of the reaction. As a consequence, the key steps that control the scope of viable substrates and various aspects of selectivity have remained largely uncharacterized. Herein, a direct experimental investigation of the dinuclear metallacycle‐forming step of the Pauson–Khand reaction is reported. These studies capitalize on well‐defined d⁹–d⁹ dinickel complexes supported by a naphthyridine–diimine (NDI) pincer ligand as functional surrogates of Co₂(CO)₈.     

Nitrogen‐doped C60 as a robust catalyst for CO oxidation

The O₂ activation and CO oxidation on nitrogen‐doped C₅₉N fullerene are investigated using first‐principles calculations. The calculations indicate that the C₅₉N fullerene is able to activate O₂ molecules resulting in the formation of superoxide species ( ) both kinetically and thermodynamically. The active superoxide can further react with CO to form CO₂ via the Eley–Rideal mechanism by passing a stepwise reaction barrier of only 0.20 eV. Ab initio molecular dynamics (AIMD) simulation is carried out to evidence the feasibility of the Eley–Rideal mechanism. In addition, the second CO oxidation takes place with the remaining atomic O without any activation energy barrier. The full catalytic reaction cycles can occur energetically favorable and suggest a two‐step Eley–Rideal mechanism for CO oxidation with O₂ catalyzed by the C₅₉N fullerene. The catalytic properties of high percentage nitrogen‐doped fullerene (C₄₈N₁₂) is also examined. This work contributes to designing higher effective carbon‐based materials catalysts by a dependable theoretical insight into the catalytic properties of the nitrogen‐doped fullerene. © 2017 Wiley Periodicals, Inc.     

Divergent Pathways and Competitive Mechanisms of Metathesis Reactions between 3‐Arylprop‐2‐ynyl Esters and Aldehydes: An Experimental and Theoretical Study

Mechanistic studies of the reaction between 3‐arylprop‐2‐ynyl esters and aldehydes catalyzed by BF₃ ? Et₂O were performed by isotopic labeling experiments and quantum chemical calculations. The reactions are shown to proceed by either a classical alkyne–carbonyl metathesis route or an unprecedented addition–rearrangement cascade. Depending on the structure of the starting materials and the reaction conditions, the products of these reactions can be Morita–Baylis–Hillman (MBH) adducts that are unavailable by traditional MBH reactions or E‐ and Z‐α,β‐unsaturated ketones. ¹⁸O‐Labeling studies suggested the existence of two different reaction pathways to the products. These pathways were further examined by quantum chemical calculations that employed the DFT(wB97XD)/6‐311+G(2d,p) method, together with the conductor‐like screening model for realistic solvation (COSMO‐RS). By using the wB97XD functional, the accuracy of the computed data is estimated to be 1–2 kcal mol^?1, shown by the careful benchmarking of various DFT functionals against coupled cluster calculations at the CCSD(T)/aug‐cc‐pVTZ level of theory. Indeed, most of the experimental data were reproduced and explained by theory and it was convincingly shown that the branching point between the two distinct mechanisms is the formation of the first intermediate on the reaction pathway: either the four‐membered oxete or the six‐membered zwitterion. The deep mechanistic understanding of these reactions opens new synthetic avenues to chemically and biologically important α,β‐unsaturated ketones.     

A Mild and Efficient Method for Chlorination of Baylis–Hillman Adducts Using PPh3/Cl3CCONH2

A new and convenient stereoselective synthesis of (Z)‐2‐(chloromethyl)alk‐2‐enoates has been achieved from Baylis–Hillman adducts by treatment with PPh₃/Cl₃CCONH₂ at room temperature. The synthesis can proceed under mild and acid‐free conditions to form the products in high yields.     

Nickel‐Catalyzed Mizoroki–Heck‐ versus Michael‐Type Addition of Organoboronic Acids to α,β‐Unsaturated Alkenes through Fine‐Tuning of Ligands

Various arylboronic acids reacted with activated alkenes in the presence of [Ni(dppe)Br₂], ZnCl₂, and H₂O in CH₃CN at 80 °C to give the corresponding Mizoroki–Heck‐type addition products in good to excellent yields. Furthermore, 1 equivalent of the hydrogenation product of the activated alkene was also produced. By tuning the ligands of the nickel complexes and the reaction conditions, Michael‐type addition was achieved in a very selective manner. Thus, various p‐ and o‐substituted arylboronic acids or alkenylboronic acid reacted smoothly with activated alkenes in CH₃CN at 80 °C for 12 h catalyzed by Ni(acac)₂, P(o‐anisyl)₃, and K₂CO₃ to give the corresponding Michael‐type addition products in excellent yields. However, for m‐substituted arylboronic acids, the yields of Michael‐type addition products are very low. The cause of this unusual meta‐substitution effect is not clear. By altering the solvent or phosphine ligand, the product yields for m‐substituted arylboronic acids were greatly improved. In contrast to previous results in the literature, the present catalytic reactions required water for Mizoroki–Heck‐type products and dry reaction conditions for Michael‐type addition products. Possible mechanistic pathways for both addition reactions are proposed.     

Lewis Acid Catalyzed Enantioselective Desymmetrization of Donor–Acceptor meso‐Diaminocyclopropanes

The first Lewis acid catalyzed enantioselective ring‐opening desymmetrization of a donor–acceptor meso‐diaminocyclopropane is reported. The copper(II)‐catalyzed Friedel–Crafts alkylation of indoles and one pyrrole with an unprecedented meso‐diaminocyclopropane delivered enantioenriched, diastereomerically pure urea products, which are structurally related to natural and synthetic bioactive compounds. The development of a new ligand through the investigation of an underexplored subclass of bis(oxazoline) ligands was essential for achieving high enantioselectivities.     

N‐heterocyclic carbene–palladium complexes for Suzuki–Miyaura coupling reaction with benzyl chloride and aromatic boronic acid leading to diarylmethanes

A family of N‐heterocyclic carbene–palladium(II)–N,N‐dimethylbenzylamine complexes ((NHC)LPdCl₂; L = N,N‐dimethylbenzylamine) were synthesized as well as characterized using single‐crystal X‐ray diffraction and spectroscopic data. These complexes exhibited higher catalytic activities for the Suzuki reaction of benzyl chlorides to afford diarylmethanes under milder conditions than other efficient (NHC)LPdCl₂ complexes. Using the optimum conditions, the expected coupling products were obtained in moderate to high yields. All reactions were carried out in air and all starting materials were used as supplied without purification.     

Formal Synthesis of Olivacine via Indolylborate

Palladium‐catalyzed tandem cyclization–cross‐coupling reaction of indolylborate 2 and vinyl bromide 5 was successfully applied in a short formal synthesis of olivacine. The reaction of 2 with 5 in the presence of Pd(OAc)₂ readily afforded three kinds of products, triene derivative 6 and vinylindole derivative 7 , along with a small amount of the piperidine derivative 8 (Scheme 2). On the other hand, the reactions of 2 with bromide 10 or 15 were also examined (Schemes 4 and 5), and their outcome markedly depended on the relative ease of ring closure as a function of ring size. Irradiation of 6 with a high‐pressure mercury lamp (→ 9 ; Scheme 2), followed by removal of the N‐[(benzyloxy)carbonyl] group and subsequent oxidation afforded, after deprotection, pyridocarbazole 23 , and the conversion of 23 to olivacine is known (Scheme 6).     

Multicyclic polyethers with pendant keto groups by polycondensation of silylated 1,1,1‐tris(4‐hydroxyphenyl)ethane

1,1,1‐Tris(4‐trimethylsiloxyphenyl)ethane, (silylated THPE), was polycondensed with 2,4‐difluoroacetophenone and 2,4‐difluorobenzophenone. All polycondensations were performed in N‐methylpyrrolidone with K₂CO₃ as promotor. The feed ratio THPE/difluoroaromat was varied from 1.0:1.3 to 1.0:1.5. Instead of hyperbranched polymers or gels, soluble multicyclic oligo‐ and polyethers were identified as main reaction products by MALDI‐TOF mass spectrometry in all experiments. At feed ratios around 1.0:1.5 multicycles free of functional group were the main products. However, when isomeric a₂‐monomers such as 2,6‐difluoroacetophenone, 2,6‐difluorobenzophenone (or 2,6‐difluorodiphenylsulfone) were used, gelation occurred at feed ratios as low as 1.0:1.1. An explanation of the different cyclization tendencies on the basis of different conformations is discussed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6233–6246, 2005     

A highly selective synthesis of 1‐substituted (E)‐buta‐1,3‐dienes with 4,4,5,5‐tetramethyl‐2‐vinyl‐1,3,2‐dioxaborolane as building block

Highly selective synthesis of 1‐substituted (E)‐buta‐1,3‐dienes via palladium‐catalyzed Suzuki–Miyaura cross‐coupling of (E)‐alkenyl iodides with 4,4,5,5‐tetramethyl‐2‐vinyl‐1,3,2‐dioxaborolane ( 1 ) is reported. The vinylboronate pinacol ester ( 1 ) acts as a vinyl building block to show high chemoselectivity for the Suzuki–Miyaura pathway versus Heck coupling in the presence of biphasic conditions (Pd(PPh₃)₄, aqueous K₂CO₃, toluene and ethanol). Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and structures of photoactive rhenium carbonyl complexes derived from 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole, 2‐(quinolin‐2‐yl)‐1,3‐benzothiazole and 1,10‐phenanthroline

Carbon monoxide (CO) has recently been identified as a gaseous signaling molecule that exerts various salutary effects in mammalian pathophysiology. Photoactive metal carbonyl complexes (photoCORMs) are ideal exogenous candidates for more controllable and site‐specific CO delivery compared to gaseous CO. Along this line, our group has been engaged for the past few years in developing group‐7‐based photoCORMs towards the efficient eradication of various malignant cells. Moreover, several such complexes can be tracked within cancerous cells by virtue of their luminescence. The inherent luminecscent nature of some photoCORMs and the change in emission wavelength upon CO release also provide a covenient means to track the entry of the prodrug and, in some cases, both the entry and CO release from the prodrug. In continuation of the research circumscribing the development of trackable photoCORMs and also to graft such molecules covalently to conventional delivery vehicles, we report herein the synthesis and structures of three rhenium carbonyl complexes, namely, fac‐tricarbonyl[2‐(pyridin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′](4‐vinylpyridine‐κN )rhenium(I) trifluoromethanesulfonate, [Re(C₇H₇N)(C₁₂H₈N₂S)(CO)₃](CF₃SO₃), ( 1 ), fac‐tricarbonyl[2‐(quinolin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′](4‐vinylpyridine‐κN )rhenium(I) trifluoromethanesulfonate, [Re(C₇H₇N)(C₁₆H₁₀N₂S)(CO)₃](CF₃SO₃), ( 2 ), and fac‐tricarbonyl[1,10‐phenanthroline‐κ²N ,N ′](4‐vinylpyridine‐κN )rhenium(I) trifluoromethanesulfonate, [Re(C₇H₇N)(C₁₂H₈N₂)(CO)₃](CF₃SO₃), ( 3 ). In all three complexes, the Re^I center resides in a distorted octahedral coordination environment. These complexes exhibit CO release upon exposure to low‐power UV light. The apparent CO release rates of the complexes have been measured to assess their comparative CO‐donating capacity. The three complexes are highly luminescent and this in turn provides a convenient way to track the entry of the prodrug molecules within biological targets.     

A rapid assay for angiotensin‐converting enzyme activity using ultra‐performance liquid chromatography–mass spectrometry

Angiotensin‐converting enzyme (ACE) plays an important role in the renin–angiotensin system and ACE activity is usually assayed in vitro by monitoring the transformation from a substrate to the product catalyzed by ACE. A rapid and sensitive analysis method or ACE activity by quantifying simultaneously the substrate hippuryl–histidyl–leucine and its product hippuric acid using an ultra‐performance liquid chromatography coupled with electrospray ionization‐mass spectrometry (UPLC‐MS) was first developed and applied to assay the inhibitory activities against ACE of several natural phenolic compounds. The established UPLC‐MS method showed obvious advantages over the conventional HPLC analysis in shortened running time (3.5 min), lower limit of detection (5 pg) and limit of quantification (18 pg), and high selectivity aided by MS detection in selected ion monitoring (SIM) mode. Among the six natural products screened, five compounds, caffeic acid, caffeoyl acetate, ferulic acid, chlorogenic acid and resveratrol indicated potent in vitro ACE inhibitory activity with IC₅₀ values of 2.527 ± 0.032, 3.129 ± 0.016, 10.898 ± 0.430, 15.076 ± 1.211 and 6.359 ± 0.086 mm , respectively. A structure–activity relationship estimation suggested that the number and the situation of the hydroxyls on the benzene rings and the acrylic acid groups may play the most predominant role in their ACE inhibitory activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Base‐Free Conditions for Rhodium‐Catalyzed Asymmetric Arylation To Produce Stereochemically Labile α‐Aryl Ketones

The asymmetric arylation of 2,2‐dialkyl cyclopent‐4‐ene‐1,3‐diones with aryl boronic acids was found to be efficiently catalyzed by a chiral diene–rhodium μ‐chloro dimer, [{RhCl((R)‐diene*)}₂], in the absence of bases in toluene/H₂O to give 2,2‐dialkyl 4‐aryl cyclopentane‐1,3‐diones in high yields with high enantioselectivity. Such compounds can not be obtained with high enantiomeric purity under the standard basic conditions used for rhodium‐catalyzed asymmetric arylation because the α‐aryl ketone products undergo racemization under the basic conditions.     

Boron as an Electron‐Pair Donor for B⋅⋅⋅Cl Halogen Bonds

MP2/aug′‐cc‐pVTZ calculations were performed to investigate boron as an electron‐pair donor in halogen‐bonded complexes (CO)₂(HB):ClX and (N₂)₂(HB):ClX, for X=F, Cl, OH, NC, CN, CCH, CH₃, and H. Equilibrium halogen‐bonded complexes with boron as the electron‐pair donor are found on all of the potential surfaces, except for (CO)₂(HB):ClCH₃ and (N₂)₂(HB):ClF. The majority of these complexes are stabilized by traditional halogen bonds, except for (CO)₂(HB):ClF, (CO)₂(HB):ClCl, (N₂)₂(HB):ClCl, and (N₂)₂(HB):ClOH, which are stabilized by chlorine‐shared halogen bonds. These complexes have increased binding energies and shorter B?Cl distances. Charge transfer stabilizes all complexes and occurs from the B lone pair to the σ* Cl?A orbital of ClX, in which A is the atom of X directly bonded to Cl. A second reduced charge‐transfer interaction occurs in (CO)₂(HB):ClX complexes from the Cl lone pair to the π* C≡O orbitals. Equation‐of‐motion coupled cluster singles and doubles (EOM‐CCSD) spin–spin coupling constants, ^1xJ(B‐Cl), across the halogen bonds are also indicative of the changing nature of this bond. ^1xJ(B‐Cl) values for both series of complexes are positive at long distances, increase as the distance decreases, and then decrease as the halogen bonds change from traditional to chlorine‐shared bonds, and begin to approach the values for the covalent bonds in the corresponding ions [(CO)₂(HB)?Cl]⁺ and [(N₂)₂(HB)?Cl]⁺. Changes in ¹¹B chemical shieldings upon complexation correlate with changes in the charges on B.     

Graphene oxide‐catalyzed CSp3–H activation of methylarenes in aqueous medium: A unified metal‐free access to amides and benzimidazoles

Graphene oxide (GO)‐catalyzed selective synthesis of amides via C_Sp3–H activation of methylarenes and consequent C–N bond formation with anilines under aqueous medium has been described. Oxygen functionality allied with GO surface played a dual role both as acid catalyst and oxidizing agent to some extent. However, GO has a copious effect on the reaction, shown by a high TOF value with TBHP as co‐oxidant. The decisive role of carboxylic acid functional groups on GO nanosheets in this metal‐free strategy has been confirmed and was monitored by various analytic techniques viz. Fourier transform‐infrared, UV–Vis, Raman and XPS. A plausible mechanism was proposed by control experiments and by the isolation of the intermediate. Over‐oxidation of methylarenes was not detected, and high recyclability of the carbocatalyst with its heterogeneous behavior facilitated the isolation and purification of the desired products. We have further explored the utility of this process for the chemoselective synthesis of benzimidazoles.     

Synthesis and structures of photoactive manganese–carbonyl complexes derived from 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole and 2‐(quinolin‐2‐yl)‐1,3‐benzothiazole

PhotoCORMs (photo‐active CO‐releasing molecules) have emerged as a class of CO donors where the CO release process can be triggered upon illumination with light of appropriate wavelength. We have recently reported an Mn‐based photoCORM, namely [MnBr(pbt)(CO)₃] [pbt is 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole], where the CO release event can be tracked within cellular milieu by virtue of the emergence of strong blue fluorescence. In pursuit of developing more such trackable photoCORMs, we report herein the syntheses and structural characterization of two Mn^I–carbonyl complexes, namely fac‐tricarbonylchlorido[2‐(pyridin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′]manganese(I), [MnCl(C₁₂H₈N₂S)(CO)₃], (1), and fac‐tricarbonylchlorido[2‐(quinolin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′]manganese(I), [MnCl(C₁₆H₁₀N₂S)(CO)₃], (2). In both complexes, the Mn^I center resides in a distorted octahedral coordination environment. Weak intermolecular C—H…Cl contacts in complex (1) and Cl…S contacts in complex (2) consolidate their extended structures. These complexes also exhibit CO release upon exposure to low‐power broadband visible light. The apparent CO release rates for the two complexes have been measured to compare their CO donating capacity. The fluorogenic 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole and 2‐(quinolin‐2‐yl)‐1,3‐benzothiazole ligands provide a convenient way to track the CO release event through the `turn‐ON' fluorescence which results upon de‐ligation of the ligands from their respective metal centers following CO photorelease.     

Alcohol oxidation reactions catalyzed by ruthenium–carbonyl complexes of thioarylazoimidazoles

Alcohols are oxidized by N‐methylmorpholine‐N‐oxide (NMO), Bu^tOOH and H₂O₂ to the corresponding aldehydes or ketones in the presence of catalyst, [RuH(CO)(PPh₃)₂(SRaaiNR′)]PF₆ ( 2 ) and [RuCl(CO)(PPh₃)(S_κRaaiNR′)]PF₆ ( 3 ) (SRaaiNR′ ( 1 ) = 1‐alkyl‐2‐{(o‐thioalkyl)phenylazo}imidazole, a bidentate N(imidazolyl) (N), N(azo) (N′) chelator and S_κRaaiNR′ is a tridentate N(imidazolyl) (N), N(azo) (N′), S_κ‐R is tridentate chelator; R and R′ are Me and Et). The single‐crystal X‐ray structures of [RuH(CO)(PPh₃)₂(SMeaaiNMe)]PF₆ ( 2a ) (SMeaaiNMe = 1‐methyl‐2‐{(o‐thioethyl)phenylazo}imidazole) and [RuH(CO)(PPh₃)₂(SEtaaiNEt)]PF₆ ( 2b ) (SEtaaiNEt = 1‐ethyl‐2‐{(o‐thioethyl)phenylazo}imidazole) show bidentate N,N′ chelation, while in [RuCl(CO)(PPh₃)(S_κEtaaiNEt)]PF₆ ( 3b ) the ligand S_κEtaaiNEt serves as tridentate N,N′,S chelator. The cyclic voltammogram shows Ru^III/Ru^II (~1.1 V) and Ru^IV/Ru^III (~1.7 V) couples of the complexes 2 while Ru^III/Ru^II (1.26 V) couple is observed only in 3 along with azo reductions in the potential window +2.0 to ?2.0 V. DFT computation has been used to explain the spectra and redox properties of the complexes. In the oxidation reaction NMO acts as best oxidant and [RuCl(CO)(PPh₃)(S_κRaaiNR′)](PF₆) ( 3 ) is the best catalyst. The formation of high‐valent Ru^IV=O species as a catalytic intermediate is proposed for the oxidation process. Copyright © 2014 John Wiley & Sons, Ltd.     

Structures,Unimolecular Fragmentations,and Reactivities of the Self‐Assembled Multimetallic/Peptide Complexes [Mnn(GlyGly‐H)2n−1]+ and [Mnn+1(GlyGly‐H)2n]2+

Complexes of Mn²⁺ with deprotonated GlyGly are investigated by sustained off‐resonance irradiation collision‐induced dissociation (SORI‐CID), infrared multiple‐photon dissociation spectroscopy, ion–molecule reactions, and computational methods. Singly [Mn_n(GlyGly‐H)_2n?1]⁺ and doubly [Mn_n+1(GlyGly‐H)_2n]²⁺ charged clusters are formed from aqueous solutions of MnCl₂ and GlyGly by electrospray ionization. The most intense ion produced was the singly charged [M₂(GlyGly‐H)₃]⁺ cluster. Singly charged clusters show extensive fragmentations of small neutral molecules such as water and carbon dioxide as well as dissociation pathways related to the loss of NH₂CHCO and GlyGly. For the doubly charged clusters, however, loss of GlyGly is observed as the main dissociation pathway. Structure elucidation of [Mn₃(GlyGly‐H)₄]²⁺ clusters has also been done by IRMPD spectroscopy as well as DFT calculations. It is shown that the lowest energy structure of the [Mn₃(GlyGly‐H)₄]²⁺ cluster is deprotonated at all carboxylic acid groups and metal ions are coordinated with carbonyl oxygen atoms, and that all amine nitrogen atoms are hydrogen bonded to the amide hydrogen. A comparison of the calculated high‐spin (sextet) and low‐spin (quartet) state structures of [Mn₃(GlyGly‐H)₄]²⁺ is provided. IRMPD spectroscopic results are in agreement with the lowest energy high‐spin structure computed. Also, the gas‐phase reactivity of these complexes towards neutral CO and water was investigated. The parent complexes did not add any water or CO, presumably due to saturation at the metal cation. However, once some of the ligand was removed via CO₂ laser IRMPD, water was seen to add to the complex. These results are consistent with high‐spin Mn²⁺ complexes.     

A Computational Approach to the Effects of Solvent on the Structural,Electronic, Spectroscopic (195Pt NMR and IR), and Thermochemical Properties of a Third‐Generation Anticancer Drug: Trans‐Platinum(II) Complex of 3‐Aminoflavone

This study evaluated the structural, electronic and thermochemical properties of an anticancer active molecule, i.e. trans‐bis‐(3‐aminoflavone)dichloridoplatinum(II) (trans‐Pt(3‐af)₂Cl₂; TCAP) in the gas and solution phases. The polarizable continuum model (PCM) model was used to perform the required calculations in five solvents with different polarities. Moreover, the dependencies of energetic aspects, structural, thermodynamic parameters and frontier orbital energies of the complex were also examined. Dependencies of the frequency shifts of u(CO), u(NH) and ¹⁹⁵Pt Chemical shifts on the solvent dielectric were investigated by Kirkwood–Bauer–Magat equation (KBM). The energies of platinum d‐orbitals and formal electron configurations of Pt atom were calculated by natural bond analysis (NBO).     

Oligomeric Alkoxysilanes with Cagelike Hybrids as Cores: Designed Precursors of Nanohybrid Materials

Well‐defined alkoxysilane oligomers containing a cagelike carbosiloxane core were synthesized and used as novel building blocks for the formation of siloxane‐based hybrid networks. These oligomers were synthesized from the cagelike trimer derived from bis(triethoxysilyl)methane by silylation with mono‐, di‐, and triethoxychlorosilanes ((EtO)_nMe_3?nSiCl, n=1, 2, and 3). Hybrid xerogels were prepared by hydrolysis and polycondensation of these oligomers under acidic conditions. The structures of the products varied depending on the number of alkoxy groups (n). When n=2 and 3, microporous xerogels (BET surface areas of 820 and 510 m² g^?1, respectively) were obtained, whereas a nonporous xerogel was obtained when n=1. ²⁹Si NMR spectroscopic analysis suggested that partial rearrangement of the siloxane networks, which accompanied the cleavage of the Si–O–Si linkages, occurred during the polycondensation processes. By using an amphiphilic triblock copolymer surfactant as a structure‐directing agent, hybrid thin films with a 2D hexagonal mesostructure were obtained when n=2 and 3. These results provide important insight into the rational synthesis of molecularly designed hybrid materials by sol–gel chemistry.