Rapid determination of 1,1-dimethylhydrazine transformation products in soil by accelerated solvent extraction coupled with gas chromatography–tandem mass spectrometry

A method for the analytical extraction of mobile species of eightmain transformation products of 1,1-dimethylhydrazine (formaldehyde dimethylhydrazone, acetaldehyde dimethylhydrazone, 2-furaldehyde dimethylhydrazone, 1,1,4,4-tetramethyl-2-tetrazene, N,N-dimethylformamide, N-nitrosodimethylamine, 1-methyl-1H-1,2,4-triazole, and 1-formyl-2,2-dimethylhydrazine) from soils using subcritical acetonitrile at a pressure of 100 bar is proposed. The effects of temperature, number of extraction cycles, and the moisture content of soil samples on the recovery of analytes were studied. It was found that, for soils with high concentrations of lignin humic substances, efficient extraction can be attained with an addition of significant amounts of alkali to the soil (2.5 g/g). Under the optimum conditions, the recovery of analytes was higher than 70% at the extraction time no more than 30 min. A combination of the proposed sample preparation approach with analysis by gas chromatography–tandem mass spectrometry (GC-MS/MS) ensures the determination of the products of unsymmetrical dimethylhydrazine (UDMH) transformation in complex matrixes, such as soils with high concentrations of organic substance with detection limits from 1.8 to 15 µg kg^–1 using the direct injection of the extract into the chromatography system. The error of determination at a confidential probability of 0.95 was not worse than 15% even for analyte concentrations close to lower limit of quantitation (LLOQ) values. The method developed is a significant improvement compared to the highly efficient methods previously reported in literature differing from them with simple sample preparation, rapidity, low consumption of reagents, the possibility of simultaneous determination of eight compounds and 1–2 orders of higher sensitivity. It was successfully used for the analysis of real samples of peaty soil from the place of impact of the first step of a carrier rocket.     

Gas Chromatography–Mass Spectrometry Quantification of 1,1-Dimethylhydrazine Transformation Products in Aqueous Solutions: Accelerated Water Sample Preparation

The use of highly toxic rocket fuel based on 1,1-dimethylhydrazine (UDMH) in many types of carrier rockets poses a threat to environment and human health associated with an ingress of UDMH into wastewater and natural reservoirs and its transformation with the formation of numerous toxic nitrogen-containing products. Their GC-MS quantification in aqueous samples requires matrix change and is challenging due to high polarity of analytes. To overcome this problem, accelerated water sample preparation (AWASP) based on the complete removal of water with anhydrous sodium sulfate and transferring analytes into dichloromethane was used. Twenty-nine UDMH transformation products including both the acyclic and heterocyclic compounds of various classes were chosen as target analytes. AWASP ensured attaining near quantitative extraction of 23 compounds with sample preparation procedure duration of no more than 5 min. Combination of AWASP with gas chromatography–mass spectrometry and using pyridine-d₅ as an internal standard allowed for developing the rapid, simple, and low-cost method for simultaneous quantification of UDMH transformation products with detection limits of 1–5 μg L⁻¹ and linear concentration range covering 4 orders of magnitude. The method has been validated and successfully tested in the analysis of aqueous solutions of rocket fuel subjected to oxidation with atmospheric oxygen, as well as pyrolytic gasification in supercritical water modelling wastewater from carrier rockets launch sites.     

Direct determination of hydrazine,methylhydrazine, and 1,1-dimethylhydrazine by zwitterionic hydrophilic interaction liquid chromatography with amperometric detection

A promising alternative to ion-chromatographic methods currently used for the direct determination of hydrazines is provided by hydrophilic interaction liquid chromatography (HILIC). In this work, we propose a method for the simultaneous determination of hydrazine, methylhydrazine and 1,1-dimethylhydrazine in natural waters and soils based on a combination of chromatographic separation on a zwitterionic sulfobetaine stationary phase (Nucleodur HILIC) in the HILIC mode with amperometric detection.

Effects of different factors on the retention of analytes were studied and the optimum conditions of analysis were found. We recommend a mixture of acetonitrile with an aqueous phosphate buffer solution of pH 2.5 (78:22 v/v) with an ionic strength of 20 mM as a mobile phase. Detection in the direct current mode was performed at a working electrode potential of 1.1 V.

The advantages of the method are the high efficiency of separation, rapidity, high sensitivity and a wide dynamic range of analyte concentrations, covering four orders of magnitude. The attained LOD values for analytes lie in the range 0.07–0.13 μg L^–1, which is two orders of magnitude lower than those in currently used methods of ion chromatography with electrochemical and mass spectrometric detection.

The method was validated on samples of natural waters of different origin using the added–found technique. It was found that the error of analysis did not exceed 10% for river and ground waters and increased to 20–30% for peat bog surface waters.

The possibility of application of the developed method to the analysis of soils was shown on samples of peat bog soils selected at places of impact of the first steps of carrier rockets and polluted by rocket fuel based on 1,1-dimethylhydrazine.     

Quantification of Transformation Products of Unsymmetrical Dimethylhydrazine in Water Using SPME and GC-MS

Quantification of trace concentrations of transformation products of rocket fuel unsymmetrical dimethylhydrazine (UDMH) in water requires complex analytical instrumentation and tedious sample preparation. The goal of this research was to develop a simple and automated method for sensitive quantification of UDMH transformation products in water using headspace (HS) solid-phase microextraction (SPME) in combination with GC-MS and GC-MS/MS. HS SPME is based on extraction of analytes from a gas phase above samples by a micro polymer coating followed by a thermal desorption of analytes in a GC inlet. Extraction by 85 µm Carboxen/polydimethylsiloxane fiber at 50 °C during 60 min provides the best combination of sensitivity and precision. Tandem mass spectrometric detection with positive chemical ionization improves method accuracy and selectivity. Detection limits of twelve analytes by GC-MS/MS with chemical ionization are about 10 ng L^?1. GC-MS provides similar detection limits for five studied analytes; however, the list of analytes detected by this method can be further expanded. Accuracies determined by GC-MS were in the range of 75–125% for six analytes. Compared to other available methods based on non-SPME sample preparation approaches (e.g., liquid–liquid and solid-phase extraction), the developed method is simpler, automated and provides lower detection limits. It covers more UDMH transformation products than available SPME-based methods. The list of analytes could be further expanded if new standards become available. The developed method is recommended for assessing water quality in the territories affected by space activities and other related studies.     

Simultaneous determination of 1,1-dimethylhydrazine and products of its oxidative transformations by liquid chromatography–tandem mass spectrometry

A liquid chromatography–tandem mass spectrometry method is proposed for the simultaneous determination of 1,1-dimethylhydrazine, methylhydrazine, N,N-dimethylformamide, 1-methyl-1H-1,2,4-triazole, dimethylguanidine, N-nitrosodimethylamine and 1,1,4,4-tetramethyltetrazene, important rocket fuel pollutants of soils. Chromatographic separation was conducted according to previously published results in an isocratic mode on an analytical column with a Nucleosil-100–5SA sulfo-cation-exchanger. The mobile phase composition was optimised in order to achieve effective separation of all analytes and provide high sensitivity of mass spectrometric detection – an ammonium acetate buffer solution (50 mM, pH 5.4) containing methanol (25%) was used. Detection was performed in the positive electrospray ionisation mode with multiple reaction monitoring (MRM). The parameters of ion source, ion optics, the inlet potentials of the quadrupoles and the collision energy for the detection of the found product ions were optimised. Calibration dependences for all compounds are linear in wide concentration ranges, covering 3–4 orders of magnitude. The detection limits vary from 40 pg mL^?1 for dimethylguanidine to 18 ng mL^?1 for methylhydrazine. No significant matrix effects were observed in the analysis of acid peaty soil extracts. The method was validated and successfully used to analyse a real soil sample collected at the place of impact of the first stage of a carrier rocket.     

Quantification of BTEX in Soil by Headspace SPME–GC–MS Using Combined Standard Addition and Internal Standard Calibration

There is a great demand for simple, fast and accurate methods for quantification of volatile organic contaminants in soil samples. Solid-phase microextraction (SPME) has a huge potential for this purpose, but its application is limited by insufficient accuracy caused by a matrix effect. The aim of this research was to develop the method for BTEX quantification in soil using combined standard addition (SA) and internal standard (IS) calibration. Deuterated benzene (benzene-d6) was used as the internal standard for all analytes. The optimized method includes spiking replicate samples with different concentrations of BTEX standards and the same concentration of benzene-d6, equilibration of soil samples at 40 °C during 2 h, and SPME–GC–MS analysis. Precision and accuracy of IS and SA methods were compared on different soil matrices. Combined SA + IS method provided more precise calibration plots compared to the conventional SA calibration. The SA + IS calibration provided more precise and accurate results compared with a reference method based on solvent extraction followed by GC–MS when applied to BTEX quantification in real soil samples (spiked with diesel fuel and aged). Recoveries of BTEX from soil samples spiked with known concentrations of analytes using the developed method were in the range of 73–130% with RSD values less than 15% for all BTEX. The proposed simultaneous standard addition and internal standard approach can be advantageous and adopted for improved quantification of other toxic VOCs in soil.     

Simultaneous determination of sulfonamides and metabolites in manure samples by one-step ultrasound/microwave-assisted solid–liquid–solid dispersive extraction and liquid chromatography–mass spectrometry

An in-line matrix cleanup method was used for the simultaneous extraction of 15 sulfonamides and two metabolites from manure samples. The ultrasound/microwave-assisted extraction (UMAE) combined with solid–liquid–solid dispersive extraction (SLSDE) procedure provides a simple sample preparation approach for the processing of manure samples, in which the extraction and cleanup are integrated into one step. Ultrasonic irradiation power, extraction temperature, extraction time, and extraction solvent, which could influence the UMAE efficiency, were investigated. C₁₈ was used as the adsorbent to reduce the effects of interfering components during the extraction procedure. The extracts were concentrated, and the analytes were analyzed by liquid chromatography–tandem mass spectrometry (LC–MS/MS) without any further cleanup. The isotopically labeled compounds sulfamethoxazole-d ₄, sulfamethazine-d ₄, sulfamonomethoxine-d ₄, and sulfadimethoxine-d ₆ were selected as internal standards to minimize the matrix effect in this method. The recoveries of the antibiotics tested ranged from 71 to 118 % at the three spiking levels examined (20, 200, and 500 μg?·?kg^-1). The limits of detections were 1.2–3.6 μg?·?kg^-1 and the limits of quantification were 4.0–12.3 μg?·?kg^-1 for the sulfonamides and their metabolites. The applicability of the method was demonstrated by analyzing 30 commercial manure samples. The results indicated that UMAE–SLSDE combined with LC–MS/MS is a simple, rapid, and environmentally friendly method for the analysis of sulfonamides and their metabolites in manure, and it could provide the basis for a risk assessment of the antibiotics in agricultural environments.     

Stress Degradation Studies of Anagliptin,Development of Validated Stability Indicating Method,Degradation Kinetics Study,Identification and Isolation of Degradation Products

A gradient-specific stability indicating HPLC method was developed and validated for the determination of the antidiabetic agent anagliptin in laboratory mixtures. Reversed-phase chromatography was performed using a Shimadzu LC-20 AD pump (binary), Shimadzu PDA M-20A diode array detector, and Waters Symmetry C-18 column (150?×?4.6 mm, 3.5 µm) maintained at a column oven temperature of 40 °C with UV detection at 247 nm. A gradient program was run at flow rate of 1 mL min^?1. Mobile phase A consisted of a mixture of acetate buffer(10 mm) pH 5/methanol/acetonitrile in the ratio of 90:5:5. Mobile phase B consisted of a mixture of acetate buffer (10 mm) pH 5/methanol/acetonitrile in the ratio of 50:25:25. The method was validated according International Conference of Harmonization (ICH) guidelines. Linearity was observed in the concentration range of 10–120 µg/mL with regression coefficient r²(0.999). The LOD was found to be 7.8 µg/mL and LOQ was found to be 22.68 µg/mL. Anagliptin was subjected to stresses such as acidic, alkali, oxidation, photolysis, and thermal conditions. The proposed method was validated as per ICH guidelines and was found to be accurate, precise, and specific. The drug showed significant degradation in alkaline and oxidative conditions. Alkaline and oxidative degradation followed first-order kinetics. Degradation rate constant and half-lives were determined. Degradation products in alkaline and oxidative conditions were identified by LC–MS. One major degradation product was isolated from each condition by preparative HPLC. These degradation products were characterized by ¹H NMR, ¹³C NMR, DEPT, D₂O exchange, MS/MS, HRMS, and IR techniques. From the spectral data the alkaline degradation product was characterized as 1-{2-[1-(2-methylpyrazolo[1,5-a]pyrimidine-6-carboxamido)-methyl-propan-2-yl-amino]acetyl}pyrrolidine-2-carboxamide. The oxidative degradation product was characterized as N-[2-({2-[(2S)-2-cyanopyrrolidin-1-yl]-2-oxoethyl}amino)-2-methylpropyl]-2-methylpyrazolo-[1,5-a]pyrimidine-N-oxido-6-carboxamide.     

Validation of an LC–MS/MS Method for Simultaneous Detection of Five Selective KCNQ Channel Openers: ICA-27243, ML-213, PF-05020182, SF-0034 and Flupirtine in Mice Plasma and its Application to a Pharmacokinetic Study in Mice

A sensitive and rapid LC–MS/MS method was developed and validated for the simultaneous quantitation of five selective KCNQ channel openers, namely ICA-27243, ML-213, PF-05020182, SF-0034 and flupirtine in mice plasma as per regulatory guideline. The analytes and the internal standard (IS; flupirtine-d ₄ ) were extracted from 50 µL mice plasma by liquid–liquid extraction, followed by chromatographic separation using an Atlantis C₁₈ column with an isocratic mobile phase comprising 0.2% formic acid: acetonitrile (20:80, v/v) at a flow rate of 0.6 mL min^?1 within 2.5 min. Detection and quantitation was done by multiple reaction monitoring on a triple quadrupole mass spectrometer following the transitions: m/z 268.9 → 140.8, 258.1 → 95.1, 367.2 → 269.1, 322.2 → 248.2, 305.7 → 196.4 and 309.1 → 196.1 for ICA-27243, ML-213, PF-05020182, SF-0034, flupirtine and the IS, respectively, in the positive ionization mode. The calibration curves were linear from 1.00 to 2008 ng mL^?1 for all the analytes with r² ≥ 0.99. The intra- and inter-batch accuracy and precision (% CV) across quality controls varied from 90.0 to 113 and 2.64 to 13.0; 93.8 to 114 and 3.15 to 14.9%, respectively, for all the analytes. Analytes were found to be stable under different stability conditions. The method was applied to a pharmacokinetic study in mice.     

Preparation of a Sulfoalkylbetaine-Based Zwitterionic Monolith with Enhanced Hydrophilicity for Capillary Electrochromatography Separation Applications

A novel monolithic stationary phase based on in situ copolymerization of zwitterionic monomer N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) ammonium betaine (DMMSA), pentaerythritol triacrylate (PETA), either methacrylatoethyl trimethyl ammonium chloride (META) or sodium 2-methylpropene-1-sulfonate (MPS) was designed as a multifunctional separation column for hydrophilic interaction capillary electrochromatography (HI-CEC). A significantly enhanced hydrophilicity was obtained on the poly(DMMSA-co-PETA-co-META or MPS) monolith, which was contributed by the high percentage of DMMSA in the polymerization mixture. A column efficiency of 200,000 plates/m was obtained and the monolithic column also displayed a satisfactory repeatability in terms of migration time with RSD values less than 1.1% (intra-day, n = 5) and 2.0% (inter-day, n = 3). Most importantly, the column was successfully applied to separation of a pool of neurotransmitters which are not well separated on commercial HILIC packing materials. A baseline separation of the 12 model components was obtained with good selectivity, symmetrical peak shape and high column efficiency with BGE consisting of 20 mM ammonium formate (pH 3.0) in ACN/H₂O (80/20, v/v).     

Determination of nitrophenolate sodium in aquatic products by HPLC–MS/MS with atmospheric pressure chemical ionization

The paper describes an efficient method for the determination of nitrophenolate sodium in aquatic products by HPLC combined with atmospheric pressure chemical ionization with tandem mass spectrometry (LC–APCI-MS/MS). Analytes were extracted from aquatic products by acetonitrile, the extracts were degreased by alumina and concentrated, the concentrated solution was further purified by Oasis HLB cartridge. Finally, the analytes were separated and detected by LC–APCI-MS/MS in negative ion mode. Excellent linearity with correlation coefficients of more than 0.995 was observed in the concentration range of 2–200 μg/L for p-nitrophenol sodium and 2-methoxy-5-nitrophenolate sodium, and 5–200 μg/L for ο-nitrophenol sodium. Recovery rates of nitrophenolate sodium between 86.1–94.3% were achieved. Limit of quantitation of p-nitrophenol sodium and 2-methoxy-5-nitrophenolate sodium was 2 μg/kg and ο-nitrophenol sodium was 5 μg/kg, with relative standard deviations <10%. This method was employed in the practical analysis of spiked and naturally contaminated aquatic products.     

Chromogenic Reaction of 1,1-Dimethylhydrazine with Aryltetrazolium Salts

The reactions of 1,1-dimethylhydrazine with 2,3,5-triphenyl-2Н-tetrazolium and 2,5-diphenyl-3-(4-nitrophenyl)-2Н-tetrazolium chlorides in a solution and on a cellulose carrier have been studied by means of spectrophotometry and chromato–mass spectrometry to develop new chromogenic indicators for detection of 1,1-dimethylhydrazine. 1,3,5-Triphenylformazan and 1,3-diphenyl-5-(4-nitrophenyl)formazan are formed in these reactions, respectively; deep red shifts have been observed. Other products of these reactions result from oligomerization and addition of short-living 1,1-dimethylhydrazyl and tetrazolium radicals.     

LC–MS/MS Determination of Antihypertension Drugs in Rat Plasma and Urine: Applications to Pharmacokinetics

A sensitive, rapid and reproducible LC–MS/MS method for the determination of olmesartan (OLM), amlodipine (ALM) and hydrochlorothiazide (HCZ) in rat plasma and urine has been developed and validated. Irbesartan (IRB) was used as an internal standard. The analytes were separated on a Waters XTerra-C₁₈ column using gradient elution with acetonitrile and 10 mM ammonium acetate buffer (pH 3.5, adjusted with acetic acid) at a flow rate of 1.0 mL min^?1. The three analytes were ionized by positive ion electrospray using multiple-reaction monitoring (MRM) mode to monitor precursor?→?product ion transitions m/z 447.31?→?234.97 for OLM, 408.87?→?238.18 for AML and 290.1?→?204.85 for HCZ. The specificity, matrix effect, recovery, sensitivity, linearity, accuracy, precision, and stabilities were all validated over the concentration range 0.4–100 ng mL^?1 for AML, 0.2–100 ng mL^?1 for OLM, 0.1–100 ng mL^?1 for HCZ. The mean concentrations (C_max) are 10.32, 587, and 3.4 for OLM, ALM, and HCZ, respectively, by the oral administration of 15 mg kg^?1 of each analyte.     

Determination of urine caffeine and its metabolites by use of high-performance liquid chromatography-tandem mass spectrometry: estimating dietary caffeine exposure and metabolic phenotyping in population studies

We have developed and validated a high-performance liquid chromatography-tandem mass spectrometric (LC-MS/MS) method for determining urine caffeine and 14 caffeine metabolites suitable for estimating caffeine exposure and metabolic phenotyping in population studies. Sample preparation consisted solely of a series of simple reagent treatments at room temperature. Stable isotope-labeled analogs were used as internal standards for all analytes. We developed rapid LC-MS/MS separations for both positive and negative ion mode electrospray ionizations to maximize measurement sensitivity. Limits of detection were 0.05–0.1 μmol/L depending on the analytes. Method imprecision, based on total coefficients of variation, was generally <7 % when analyte concentration was >1 μmol/L. Analyte recoveries were typically within 10 % of being quantitative (100 %), and good agreement was observed among analytes measured across different MS/MS transitions. We applied this method to the analysis of a convenience set of human urine samples (n?=?115) and were able to detect a majority of the analytes in ≥99 % of samples as well as calculate caffeine metabolite phenotyping ratios for cytochrome P450 1A2 and N-acetyltransferase 2. Whereas existing LC-MS/MS methods are limited in number of caffeine metabolites for which they are validated, or are designed for studies in which purposely elevated caffeine levels are expected, our method is the first of its kind designed specifically for the rapid, sensitive, accurate, and precise measurement of urine caffeine and caffeine metabolites at concentrations relevant to population studies.

Open image in new window

Figure The determination of caffeine and its metabolites by LC-MS/MS. Both positive and negative ion mode electrospray ionization were used to maximize measurement sensitivity and selectivity, allowing the development of a robust method suitable for estimating caffeine exposure and metabolic phenotyping in population studies

     

Combination of microwave heating extraction and dispersive liquid-liquid microextraction for the determination of nitrosoamines in foods using gas-liquid chromatography with a mass-spectrometric detector

A method has been developed for the determination of trace amounts of seven nitrosoamines (N-nitrosodimethylamine, N-nitrosomethylethylamine, N-nitrosodiethylamine, N-nitrosopyrrolidine, N-nitrosodipropylamine, N-nitrosopiperidine, and N-nitrosodibutylamine) in food using gas-liquid chromatography with a mass-spectrometric detector. The optimum chromatographic conditions were selected: a DB-5MS column, temperature ramp rate 10 K/min from 40 to 250°C, carrier gas flow rate 1 mL/min. Conditions of the extraction of nitrosoamines from samples using microwave heating extraction followed by dispersive liquid-liquid microextraction, ensuring sufficient preconcentration and additional purification of the extract, have been optimized. The linearity ranges for nitrosoamines were (0.5–2.5)–25 µg/kg; the limits of detection were 0.1–0.5 µg/kg (signal-tonoise ratio 3). The method has been applied to the analysis of samples of sausage, smoked chicken meat, and smoked pork. The time of analysis is 1.5–2 h, the relative standard deviation of the results of analysis does not exceed 10%.     

Development and Validation of Stability-Indicating UPLC Method for 9-Desmethyl-<Emphasis Type="Italic">α</Emphasis>-dihydrotetrabenazine

A stability-indicating UPLC method was developed for quantitative determination of 9-desmethyl-α-dihydrotetrabenazine (9-DM-α-DTBZ), the precursor for preparing a widely used vesicular monoamine transporter 2 imaging agent ¹¹C-α-DTBZ. Compound 9-DM-α-DTBZ was subjected to various stress conditions consisting of acidic, alkaline, oxidative, thermal and photolytic forced degradation. The decomposition of 9-DM-α-DTBZ was observed under oxidative condition, whereas no obvious degradation was shown under the other stress conditions. For chromatographic separation of 9-DM-α-DTBZ and its degradation products, an Acquity UPLC BEH C18 column (2.1 × 100 mm, 1.7 μm) and a mobile phase of 20:80 (v/v) methanol/ammonium acetate buffer (pH 4.5, 10 mM) were used. Quantitative determination of 9-DM-α-DTBZ was performed using a PDA detector at a flow rate of 0.30 mL min^?1. UPLC–MS analysis was further utilized to characterize the two degradation products. The proposed method was fully validated as per USP guidelines with respect to linearity, accuracy, precision, robustness, limit of detection (LOD) and limit of quantification (LOQ). The linear regression analysis showed a good linear relationship (r ²  = 0.9995) in the concentration range of 0.001–1.00 mg mL^?1 (n = 6). The assay method was found to have good precision (1.14–1.35% RSD) and recovery (98.91–101.23%). Additionally, the LOD and LOQ of 9-DM-α-DTBZ were 0.30 and 1.00 μg mL^?1, respectively. These results indicated that the present method could be used to evaluate the quality of regular production samples and also used in stability assays.     

Fast Determination of Monocyclic Aromatic Hydrocarbons in Ambient Air Using a Portable Gas Chromatography–Photoionization Detector

Many air sampling methods are time consuming and require complex pre-treatment steps. Gas chromatography–photoionization detector (GC–PID) is a rapid method for sampling and analysis. However, although it has been used in a number of studies, its operating conditions and performance parameters have not been optimized systematically. In this study, a GC–PID method for analysis of monocyclic aromatic hydrocarbons in gas samples without pre-concentration or enrichment was developed and optimized. This GC–PID can perform both online and off-line analysis. In online analysis, the sample was pumped directly into a Teflon sample loop (pumped online injection), which resulted in minimal loss of sample. The optimum parameters were as follows: 30-s pumping time, 10 mL min^?1 of carrier gas flow rate, and 40 °C oven temperature. GC–PID was applied to analysis of benzene, toluene and xylene. The calibration curves showed good linearity for online analysis. The results obtained by GC–PID were accurate and reliable, with all the correlation coefficients ≥0.9972 and all the relative standard deviations <3%. A mixture of benzene, toluene, and o-, m-, and p-xylenes was separated satisfactorily in 10 min, except for m- and p-xylene. The performance of the portable GC–PID was compared with that of an ATD–GC–FID for quantification of benzene, toluene and xylene in calibration gas samples, and benzene, toluene, ethylbenzene, and the o-, m-, and p-xylenes in outdoor ambient air. The results indicated that GC–PID with pumped online injection was stable and accurate for analysis of these monocyclic aromatic hydrocarbons.     

Simultaneous quantification and qualification of synacthen in plasma

Tetracosactide (Synacthen), a synthetic analogue of adrenocorticotropic hormone (ACTH), can be used as a doping agent to increase the secretion of glucocorticoids by adrenal glands. The only published method for anti-doping control of this drug in plasma relies on purification by immunoaffinity chromatography and LC/MS/MS analysis. Its limit of detection is 300 pg/mL, which corresponds to the peak value observed 12 h after 1 mg Synacthen IM administration. We report here a more sensitive method based on preparation of plasma by cation exchange chromatography and solid-phase extraction and analysis by LC/MS/MS with positive-mode electrospray ionization using 7–38 ACTH as internal standard. Identification of Synacthen was performed using two product ions, m/z 671.5 and m/z 223.0, from the parent [M?+?5H]⁵⁺ ion, m/z 587.4. The recovery was estimated at 70%. A linear calibration curve was obtained from 25 to 600 pg/mL (R ²?>?0.99). The lower limit of detection was 8 pg/mL (S/N?>?3). The lower limit of quantification was 15 pg/mL (S/N?>?10; CV%?相似文献   

Arylation of adamantanamines: VIII. Optimization of the catalytic system for copper-catalyzed arylation of adamantane-containing amines

Arylation of adamantane-containing amines with iodobenzene in the presence of copper(I) and copper(II) compounds and various N,N-, N,O- and O,O-bidentate ligands was studied. The best results were obtained using the catalytic system CuI–rac-BINOL [1,1′-bi(naphthalen-2-ol)] (10/20 mol %). Reactions with iodobenzene derivatives containing electron-donor and electron-withdrawing substituents in the para position to the iodine atom were carried out under the optimal conditions.     

From individual proteins to proteomic samples: characterization of <Emphasis Type="Italic">O</Emphasis>-glycosylation sites in human chorionic gonadotropin and human-plasma proteins

O-glycosylation-site characterization of individual glycoproteins is a major challenge because of the heterogeneity of O-glycan core structures. In proteomic studies, O-glycosylation-site analysis is even more difficult because of the complexity of the sample. In this work, we designed a rapid and convenient workflow for characterizing the O-glycosylation sites of individual proteins and the human-plasma proteome. A mixture of exoglycosidases was used to partially remove O-glycan chains and leave an N-acetylgalacosamine (GalNAc) residue attached to the Ser or Thr residues. The O-glycosylated peptides could then be identified by using liquid chromatography–tandem mass spectrometry (LC–MS–MS) to detect the 203 Da mass increase. Jacalin was used to selectively isolate O-GalNAc glycopeptides before LC–MS–MS analysis, which is optional for individual proteins and necessary for complex human-plasma proteins. Bovine fetuin and human chorionic gonadotropin (hCG) were used to test the analytical workflow. The workflow indicated superior sensitivity by not only covering most previously known O-glycosylation sites but also discovering several novel sites. Using only one drop of blood, a total of 49 O-GalNAc-linked glycopeptides from 36 distinctive glycoproteins in human plasma were identified unambiguously. The approach described herein is simple, sensitive, and global for site analysis of core 1 through core 4 O-glycosylated proteins.