Liquid crystal properties of new ionic liquid crystal compounds having a 1,3-dioxane ring

New pyridinium type chiral ionic liquid crystal materials having a 1,3-dioxane ring in the central core, (+)- N -2-methylbutyl-4-(5-alkyl-1,3-dioxan-2-yl)pyridinium bromides ( 6 ), were synthesized. Mixture A was made by adding 5.9 wt % of compound 6-3 to the ferroelectric liquid crystal mixture Merck 4655-100; its phase transitions and some liquid crystal properties were measured. In spite of a large decrease of P s for mixture A, its response time A was the same as that of Merck 4655-100. The dielectric constants perpendicular to the molecular axis for the smectic C* and smectic A phases were measured for the mixture and Merck 4655-100: in the smectic C phase, these dielectric constants were almost the same (4.5~5.5), but in the smectic A phase, the perpendicular dielectric constant of the mixture was 47.0 and that of Merck 4655-100 was 4.5.     

New ionic liquid crystal compounds having a 1,3-dithiane or 1,3-dioxane ring

New pyridinium type thermotropic ionic liquid crystal materials having a 1,3-dithiane ring in the central core N-substituted 4-(5-alkyl-1,3-dithian-2-yl)pyridinium bromides and the corresponding 1,3-dioxanes were synthesized and their mesomorphic behaviours compared. The principal feature of these compounds is to exhibit a smectic A phase over a very wide temperature range including room temperature.     

Comparisons of the vector method and tensor method for simulating liquid crystal devices

In calculating the director configuration in a liquid crystal device, two methods are commonly employed: a vector model and a tensor model. In this paper, we compare and contrast these methods for liquid crystal devices consisting of a layer of liquid crystal sandwiched between two plates. We compare the reliability and accuracy of the results, the speed of computation and the complexity of implementations of each method.     

Continuous viewing angle controllable patterned vertical alignment liquid crystal display

A continuous viewing angle switchable patterned vertical alignment liquid crystal display (PVA-LCD) with circle polarisers is proposed. In wide viewing angle (WVA) mode, the viewing cone with contrast ratio larger than 1000:1 is extended to 50° and the contrast ratio larger than 100:1 is extended to 80°. Meanwhile, the viewing cone with contrast ratio more than 10:1 is limited to 40° in all direction for narrow viewing angle (NVA) mode. The viewing angle of the display can be controlled by applying a bias voltage on the common electrode. With the increasing bias voltage, the viewing angle cone with contrast ratio more than 10:1 can be changed from 40° to 20°. The proposed PVA-LCD has high transmittance (~93%) under the circle polarisers because the dead zone in the normal PVA-LCD with linear polarisers is eliminated.     

New 1,3-dioxane type ionic liquid crystal materials having a terminal double bond

New 1,3-dioxane type ionic liquid crystal materials having a terminal double bond were synthesized. The mesomorphic behaviour of these compounds was measured. The principal features of these compounds are a smectic A phase over a very wide range including room temperature, and a low isotropic to mesophase transition temperature (for example, compound 6-1: Cr-22 SmA 25 I).     

New 1,3-dioxane type ionic liquid crystal materials having a terminal double bond

New 1,3-dioxane type ionic liquid crystal materials having a terminal double bond were synthesized. The mesomorphic behaviour of these compounds was measured. The principal features of these compounds are a smectic A phase over a very wide range including room temperature, and a low isotropic to mesophase transition temperature (for example, compound 6-1: Cr-22 SmA 25 I).     

Liquid crystal alignment behaviours on poly(methyl methacrylate) having polyhedral oligomeric silsesquioxane groups

A series of poly(methyl methacrylate) derivatives containing polyhedral oligomeric silsesquioxane (POSS) groups (MCP#) were synthesised via free radical polymerisation (FRP) using methacryl isobutyl POSS (MA-POSS) and methyl methacrylate as monomers to investigate liquid crystal (LC) alignment property of these polymer films. The LC cells made from the films of the polymers having 100 mol% of MA-POSS units (MCP100) showed vertical LC alignment having a pretilt angle of about 90°. The vertical LC alignment behaviour on the MCP100 film was ascribed to the very hydrophobic MCP100 surface having the surface energy value smaller than about 23 mJ/m² generated by the nonpolar bulky POSS group. Good electro-optical characteristics, such as voltage holding ratio (VHR) and residual DC voltage (R-DC), were observed for the LC cells fabricated using MCP100 as a LC alignment layer.     

Fabrication of photoluminescent liquid crystal device using an in situ self-assembled molecular layer of a pyrene derivative

An in situ self-assembled molecular layer of 1-pyrenesulfonic acid sodium salt as an alignment agent was formed on indium tin oxide substrates for vertically aligning liquid crystals (LCs). The thus-aligned LCs exhibited uniform vertical alignment under crossed polarisers. The electro-optical characteristic of the LC cell fabricated using this method exhibited better performance than those of conventional LC cells with a polyimide alignment layer. Because the proposed alignment method is a simple one and involves low concentrations of the alignment agent (0.05 wt%), it is highly cost-effective. Further, the pyrene derivative, when mixed with LCs, exhibited photoluminescence (PL) under ultraviolet light. Given that the proposed method resulted in highly vertically aligned LCs and the alignment agent exhibited PL, the method should find wide use in the fabrication of colour-filter-free LC displays.     

Simultaneous control of haze and transmittance using a dye-doped cholesteric liquid crystal cell

We propose a light shutter device using dye-doped cholesteric liquid crystals for a high-visibility see-through display. In the focal-conic state, the proposed device can perfectly block the background image through simultaneous use of light scattering and absorption effects in a single-layered structure. By switching the proposed device placed at the backside of a see-through display, we can choose transparent or high-visibility display modes in a see-through display.     

Thermo-recording in (side chain type smectic A liquid crystal polymer/nematic liquid crystal/chiral dopant/dichroic dye) composite with a low power laser

Thermo-recording in a [side chain type smectic A liquid crystal polymer (SmA-LCP)/nematic liquid crystal (N-LC)/chiral dopant/dichroic dye] composite has been realized by using 2mW of power from a He-Ne laser. The laser irradiation-induced phase transitions of smectic A (SmA) → chiral nematic (N*) → SmA formed the dominant thermo-recording mechanism in the composite. Thermo-recording in the (SmA-LCP/N-LC/chiral dopant/dichroic dye) composite exhibited a higher contrast when compared with the non-polymeric (SmA-LC)/N-LC/chiral dopant/dichroic dye composite.     

New 1,3-dioxan-type ionic liquid crystal compounds having a large dielectric constant

New pyridinium-type thermotropic ionic liquid crystal materials having a 1,3-dioxan ring in its central core: N-substituted-4-(5-alkyl-1,3-dioxan-2-yl)pyridinium bromides (6) were synthesized. The mesomorphic behaviour of these compounds and dielectric constant perpendicular to the molecular axis were measured. The principal features of these compounds are that they exhibit a smectic A phase over a wide temperature range including room temperature - for example 6f: g -9 SmA 181 I (°C)-and they have a large dielectric constant perpendicular to the molecular axis.     

New 1,3-dioxan-type ionic liquid crystal compounds having a large dielectric constant

New pyridinium-type thermotropic ionic liquid crystal materials having a 1,3-dioxan ring in its central core: N-substituted-4-(5-alkyl-1,3-dioxan-2-yl)pyridinium bromides (6) were synthesized. The mesomorphic behaviour of these compounds and dielectric constant perpendicular to the molecular axis were measured. The principal features of these compounds are that they exhibit a smectic A phase over a wide temperature range including room temperature - for example 6f: g -9 SmA 181 I (°C)-and they have a large dielectric constant perpendicular to the molecular axis.     

Liquid crystal alignment properties of n-alkylsulphonylmethyl-substituted polyoxyethylenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of n-alkylsulphonylmethyl-substituted polyoxyethylenes (#S-PEO, #?=?4, 6, 7, 8 and 10), where # is the number of carbon atoms in the n-alkyl side groups having different n-alkyl chain length, were investigated as a function of the rubbing density. The LC cells made from unrubbed #S-PEO (# ≥8) films having more than eight carbon atoms in the n-alkyl side groups showed homeotropic LC alignment. The homeotropic LC alignment behaviour correlated well with the surface energy values of the unrubbed #S-PEO films; homeotropic LC alignment was observed when the surface energy values of the unrubbed #S-PEO films were smaller than about 21.62 mJ m^?2. The LC cells made from rubbed #S-PEO (# ≥7) films having more than seven carbon atoms with a rubbing density of 150 showed homeotropic LC alignment. It was also found that the tilt angle of the LCs on the rubbed #S-PEO films was affected not only by the n-alkyl chain length of the polymers, but also by the rubbing density, regardless of the surface energy value of the #S-PEO film.     

Liquid crystal alignment properties of 2-naphthoxymethyl-substituted polystyrenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of 2-naphthoxymethyl-substituted polystyrenes with different contents of naphthoxymethyl side groups were investigated. The polymer films exhibited good optical transparency in the visible light region (400–700 nm). The LC cells made from the unrubbed films of polymers having more than 57 mol%?of 2-naphthoxymethyl containing monomeric units showed homeotropic LC alignment with a high pretilt angle of about 90^o. Good electro-optical characteristics, such as the threshold voltage, response time, voltage holding ratio and residual DC voltage were observed for the LC cells fabricated with the polymer having 100 mol%?of 2-naphthoxymethyl containing monomeric units as an LC alignment layer.     

Intra-cell ionic properties of twisted nematic liquid crystal cells

Under 1-kHz and low-frequency driving, we report our investigation of intra-cell ionic properties of two twisted nematic (TN) liquid crystal (LC) cells made of same LC mixture but different polyimide (PI) materials for LC alignments. A heterodyne interferometry system was used to measure the phase retardations of the TN cells versus applied voltages at 1 kHz. We also measured the phase retardations and currents of the TN cells versus time by applying a mid-grayscale voltage of 1.3 V at 0.1 Hz to the cells. Related to the above-measured data, we have developed equations to characterise the field-driven transports of mobile charge carriers within the PI films independently from that within the LC medium of same TN cell to obtain time-dependent in-cell voltages of mobile charge carries across the LC mixture and across two PI-alignment films, respectively. Our experimental methods can be used to optimise LC mixtures and PI materials for low-refresh-rate thin-film-transistor-driven liquid crystal displays (LCDs) for low power and provide bases for further investigations on mobile-charge-carrier generation and transport within thin in-cell PI-alignment films as well as within the LC mixture of same LC cell.     

Liquid crystal alignment properties of poly(styrenesulphonate)/alkyltrimethylammonium complexes

We synthesised a series of poly(4-styrenesulphonate)/alkyltrimethylammonium (PSS-#Cx, # = 12, 14 and 16; x?=?80, 60, 40 and 20) complexes, where # is the number of carbon atoms in the alkyl groups in alkyltrimethylammonium bromide, and x is the molar content (%) of alkyltrimethylammonium moiety, using polymer analogous reactions to investigate their liquid crystal (LC) alignment properties. In general, the LC cell fabricated using the polymer film having a longer alkyl side group and a higher molar content of alkyl side group showed homeotropic LC alignment behaviour with a pretilt angle of about 90°. The homeotropic LC alignment behaviour was well correlated with the surface energy of the polymer films. Homeotropic LC alignment was observed when the surface energy values of the polymer were smaller than about 44.87 mJ/m².     

Liquid crystal properties of a self-assembling viral coat protein

Monomers of the fd bacteriophage major coat protein, g8p, interact to form a helical bent-core structure surrounding the viral deoxyribonucleic acid (DNA). It was hypothesised that g8p has mesophasic characteristics guiding viral coat assembly. Atomic force and scanning electron microscopy reveal that g8p monomers organise to form films that wrap around a central axis to form birefringent fibres. These fibres resemble the filament structure of bent-core thermotropic B7 liquid crystals. These results offer insight into the g8p self-assembly mechanism that results in the formation of new viral particles in vivo.     

Reduction of gamma distortions in liquid crystal display by anisotropic voltage-dividing layer of reactive mesogens

We demonstrate a new concept of reducing the off-axis gamma distortions in a liquid crystal display by the formation of an anisotropic voltage-dividing layer (AVDL) on the alignment layer. The AVDL was prepared using reactive mesogens (RMs) by simple spin-coating, followed by the photo-polymerisation under the exposure of ultraviolet light (UV) through a photomask and the removal of residual RMs. The UV exposure time for the photo-polymerisation was found to be critical for the uniform alignment of the liquid crystal molecules on the AVDL. Owing to the capacitance difference between the sub-domains produced by the AVDL, the threshold voltage shift was naturally appeared in sub-domain by domain so that the reduction of the gamma distortions in the off-axis was achieved in a simple way.     

Evidence for the non-uniform distribution of polymer networks formed in liquid crystal devices

The electro-optic properties of liquid crystal devices are modified by the presence of a polymer network formed by the exposure to UV light of reactive mesogen molecules dissolved within the liquid crystal host. The effect of the polymer network depends on its density, and knowledge of this through the liquid crystal layer is necessary to understand qualitatively, and to model quantitatively, the electro-optic properties of liquid crystal devices containing polymer networks. Various techniques have been used to study the distribution of the polymer network and these show an increased concentration of the network near the surface closest to the UV light. Evidence is presented that the polymer network distribution becomes more uniform when non-UV absorbing liquid crystals are used.     

Synthesis of novel soluble rubbing-resistant polyimides used as liquid crystal vertical alignment layers

A novel functional diamine N12, containing triphenylamine moiety, biphenyl, tert-butyl substituents and long alkyl chain, N,N-bis(4-aminophenyl)-p-(3,5-di-tert-butyl-4-dodecyloxy phenyl) aniline (N12), was synthesised and characterised. A series of polyimides (PIs) were prepared based on 2,2?-bis(trifluoromethyl)benzidine, 4,4?-oxydiphthalicanhydride and different contents of N12 via a conventional two-step procedure that included a ring-opening polyaddition to gain polyamic acids, followed by chemical cyclodehydration. The chemical structures of the intermediates, diamines and PIs were characterised by Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. All of the PIs were amorphous and exhibited good solubility in both polar aprotic solvents and some low boiling point solvents. PIs containing different content of N12 could induce highly uniform vertical alignment of liquid crystals (LCs). More importantly, PIs derived from N12 showed a good rubbing resistance. Besides, all PI films showed high transmittance in the wavelength range 400–700 nm and good thermal stabilities. Such PIs could be suitable candidates for alignment layers used in the manufacture of high-performance vertical alignment mode LC displays.