Cofactor-Free,Direct Photoactivation of Enoate Reductases for the Asymmetric Reduction of C=C Bonds

Enoate reductases from the family of old yellow enzymes (OYEs) can catalyze stereoselective trans-hydrogenation of activated C=C bonds. Their application is limited by the necessity for a continuous supply of redox equivalents such as nicotinamide cofactors [NAD(P)H]. Visible light-driven activation of OYEs through NAD(P)H-free, direct transfer of photoexcited electrons from xanthene dyes to the prosthetic flavin moiety is reported. Spectroscopic and electrochemical analyses verified spontaneous association of rose bengal and its derivatives with OYEs. Illumination of a white light-emitting-diode triggered photoreduction of OYEs by xanthene dyes, which facilitated the enantioselective reduction of C=C bonds in the absence of NADH. The photoenzymatic conversion of 2-methylcyclohexenone resulted in enantiopure (ee>99 %) (R)-2-methylcyclohexanone with conversion yields as high as 80–90 %. The turnover frequency was significantly affected by the substitution of halogen atoms in xanthene dyes.     

New Fluorinated Rhodamines for Optical Microscopy and Nanoscopy

New photostable rhodamine dyes represented by the compounds 1 a – r and 3 – 5 are proposed as efficient fluorescent markers with unique combination of structural features. Unlike rhodamines with monoalkylated nitrogen atoms, N′,N‐bis(2,2,2‐trifluoroethyl) derivatives 1 e , 1 i , 1 j , 3 ‐H and 5 were found to undergo sulfonation of the xanthene fragment at the positions 4′ and 5′. Two fluorine atoms were introduced into the positions 2′ and 7′ of the 3′,6′‐diaminoxanthene fragment in compounds 1 a – d , 1 i – l and 1 m – r . The new rhodamine dyes may be excited with λ=488 or 514 nm light; most of them emit light at λ=512–554 nm (compounds 1 q and 1r at λ=576 and 589 nm in methanol, respectively) and have high fluorescence quantum yields in solution (up to 98 %), relatively long excited‐state lifetimes (>3 ns) and are resistant against photobleaching, especially at high laser intensities, as is usually applied in confocal microscopy. Sulfonation of the xanthene fragment with 30 % SO₃ in H₂SO₄ is compatible with the secondary amide bond (rhodamine‐CON(Me)CH₂CH₂COOH) formed with MeNHCH₂CH₂COOCH₃ to providing the sterically unhindered carboxylic group required for further (bio)conjugation reactions. After creating the amino reactive sites, the modified derivatives may be used as fluorescent markers and labels for (bio)molecules in optical microscopy and nanoscopy with very‐high light intensities. Further, the new rhodamine dyes are able to pass the plasma membrane of living cells, introducing them as potential labels for recent live‐cell‐tag approaches. We exemplify the excellent performance of the fluorinated rhodamines in optical microscopy by fluorescence correlation spectroscopy (FCS) and stimulated emission depletion (STED) nanoscopy experiments.     

Masked Rhodamine Dyes of Five Principal Colors Revealed by Photolysis of a 2‐Diazo‐1‐Indanone Caging Group: Synthesis,Photophysics, and Light Microscopy Applications

Caged rhodamine dyes (Rhodamines NN) of five basic colors were synthesized and used as “hidden” markers in subdiffractional and conventional light microscopy. These masked fluorophores with a 2‐diazo‐1‐indanone group can be irreversibly photoactivated, either by irradiation with UV‐ or violet light (one‐photon process), or by exposure to intense red light (λ～750 nm; two‐photon mode). All dyes possess a very small 2‐diazoketone caging group incorporated into the 2‐diazo‐1‐indanone residue with a quaternary carbon atom (C‐3) and a spiro‐9H‐xanthene fragment. Initially they are non‐colored (pale yellow), non‐fluorescent, and absorb at λ=330–350 nm (molar extinction coefficient (ε)≈10⁴ M^?1 cm^?1) with a band edge that extends to about λ=440 nm. The absorption and emission bands of the uncaged derivatives are tunable over a wide range (λ=511–633 and 525–653 nm, respectively). The unmasked dyes are highly colored and fluorescent (ε= 3–8×10⁴ M^?1 cm^?1 and fluorescence quantum yields (?)=40–85 % in the unbound state and in methanol). By stepwise and orthogonal protection of carboxylic and sulfonic acid groups a highly water‐soluble caged red‐emitting dye with two sulfonic acid residues was prepared. Rhodamines NN were decorated with amino‐reactive N‐hydroxysuccinimidyl ester groups, applied in aqueous buffers, easily conjugated with proteins, and readily photoactivated (uncaged) with λ=375–420 nm light or intense red light (λ=775 nm). Protein conjugates with optimal degrees of labeling (3–6) were prepared and uncaged with λ=405 nm light in aqueous buffer solutions (?=20–38 %). The photochemical cleavage of the masking group generates only molecular nitrogen. Some 10–40 % of the non‐fluorescent (dark) byproducts are also formed. However, they have low absorbance and do not quench the fluorescence of the uncaged dyes. Photoactivation of the individual molecules of Rhodamines NN (e.g., due to reversible or irreversible transition to a “dark” non‐emitting state or photobleaching) provides multicolor images with subdiffractional optical resolution. The applicability of these novel caged fluorophores in super‐resolution optical microscopy is exemplified.     

The double H‐atom acceptability of the P=O group in new XP(O)(NHCH2C6H4‐2‐Cl)2 phosphoramidates [X = C6H5O– and CF3C(O)NH–]: a database analysis of compounds having a P(O)(NHR) group

In the hydrogen‐bond patterns of phenyl bis(2‐chlorobenzylamido)phosphinate, C₂₀H₁₉Cl₂N₂O₂P, (I), and N,N′‐bis(2‐chlorobenzyl)‐N′′‐(2,2,2‐trifluoroacetyl)phosphoric triamide, C₁₆H₁₅Cl₂F₃N₃O₂P, (II), the O atoms of the related phosphoryl groups act as double H‐atom acceptors, so that the P=O...(H—N)₂ hydrogen bond in (I) and the P=O...(H—N_amide)₂ and C=O...H—N_C(O)NHP(O) hydrogen bonds in (II) are responsible for the aggregation of the molecules in the crystal packing. The presence of a double H‐atom acceptor centre is a result of the involvement of a greater number of H‐atom donor sites with a smaller number of H‐atom acceptor sites in the hydrogen‐bonding interactions. This article also reviews structures having a P(O)NH group, with the aim of finding similar three‐centre hydrogen bonds in the packing of phosphoramidate compounds. This analysis shows that the factors affecting the preference of the above‐mentioned O atom to act as a double H‐atom acceptor are: (i) a higher number of H‐atom donor sites relative to H‐atom acceptor centres in molecules with P(=O)(NH)₃, (N)P(=O)(NH)₂, C(=O)NHP(=O)(NH)₂ and (NH)₂P(=O)OP(=O)(NH)₂ groups, and (ii) the remarkable H‐atom acceptability of this atom relative to the other acceptor centre(s) in molecules containing an OP(=O)(NH)₂ group, with the explanation that the N atom bound to the P atom in almost all of the structures found does not take part in hydrogen bonding as an acceptor. Moreover, the differences in the H‐atom acceptability of the phosphoryl O atom relative to the O atom of the alkoxy or phenoxy groups in amidophosphoric acid esters may be illustrated by considering the molecular packing of compounds having (O)₂P(=O)(NH) and (O)P(=O)(NH)(N)groups, in which the unique N—H unit in the above‐mentioned molecules almost always selects the phosphoryl O atom as a partner in forming hydrogen‐bond interactions. The P atoms in (I) and (II) are in tetrahedral coordination environments, and the phosphoryl and carbonyl groups in (II) are anti with respect to each other (the P and C groups are separated by one N atom). In the crystal structures of (I) and (II), adjacent molecules are linked via the above‐mentioned hydrogen bonds into a linear arrangement parallel to [100] in both cases, in (I) by forming R₂²(8) rings and in (II) through a combination of R₂²(10) and R₂¹(6) rings.     

Synthesis of novel dithienothiophene‐ and 2,7‐carbazole‐based conjugated polymers and H‐bonded effects on electrochromic and photovoltaic properties

Three kinds of dithienothiophene/carbazole‐based conjugated polymers ( P1–P3 ), which bear acid‐protected and benzoic acid pendants in P2 and P3 , respectively, were synthesized via Suzuki coupling reaction. Interestingly, P1 – P3 exhibited reversible electrochromism during the oxidation processes of cyclic voltammogram studies, and P3 (with H‐bonds) revealed the best electrochromic property with the most noticeable color change. According to powder X‐ray diffraction (XRD) analysis, these polymers exhibited obvious diffraction features indicating bilayered packings between polymer backbones and π‐π stacking between layers in the solid state. Compared with the XRD data of P2 (without H‐bands), H‐bonds of P3 induced a higher crystallinity in the small‐angle region (corresponding to a higher ordered bilayered packings between polymer backbones), but with a similar crystallinity in the wide angle region indicating a comparable π‐π stacking distance between layers. Moreover, based on the preliminary photovoltaic properties of PSC devices ( P1 – P3 blended individually with PCBM acceptor in the weight ratio of 1:1), P3 (with H‐bonds) possessed the highest power conversion efficiency of 0.61% (with J_sc = 2.26 mA/cm², FF = 29.8%, and V_oc = 0.9 V). In contrast to P2 (without H‐bands), the thermal stability, crystallinity, and electrochromic along with photovoltaic properties of P3 were generally enhanced due to its H‐bonded effects. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of a new iron–sulfur cluster compound and its photocatalytic H2 evolution activity through visible light irradiation

A new iron–sulfur cluster compound, namely [(μ‐BNT)Fe₂(CO)₆] ( A ; BNT = (R)‐1,1′‐binaphthalene‐2,2′‐dithiol), was synthesized by self‐assembly of BNT with [Fe₃(CO)₁₂] and characterized using ¹H NMR, ¹³C NMR, infrared spectra and elemental analysis. The H₂ evolution activity of A was evaluated in a constructed homogeneous photocatalytic system by combining A as catalyst, xanthene dyes as photosensitizer and triethylamine as sacrificial reagent, to give efficient H₂ generation under visible‐light irradiation (λ > 420 nm). The maximum H₂ evolution of 404 turnovers (versus catalyst) was recorded under optimal conditions in CH₃CN–H₂O (1:1, v/v) after 4 h irradiation. The mechanism of H₂ evolution is briefly discussed using fluorescence spectra and electrochemical analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

New Reactivity Patterns in 3H-Phosphaallene Chemistry [Aryl-P=C=C(H)-tBu]: Hydroboration of the C=C Bond,Deprotonation and Trimerisation

3H-Phosphaallenes, R−P=C=C(H)C−R’ ( 3 ), are accessible in a multigram scale on a new and facile route and show a fascinating chemical reactivity. BH₃(SMe₂) and 3 a (R=Mes*, R’=tBu) afforded by hydroboration of the C=C bonds of two phosphaallene molecules an unprecedented borane ( 7 ) with the B atom bound to two P=C double bonds. This compound represents a new FLP based on a B and two P atoms. The increased Lewis acidity of the B atom led to a different reaction course upon treatment of 3 a with H₂B-C₆F₅(SMe₂). Hydroboration of a C=C bond of a first phosphaallene is followed in a typical FLP reaction by the coordination of a second phosphaallene molecule via B−C and P−B bond formation to yield a BP₂C₂ heterocycle ( 8 ). Its B−P bond is short and the B-bound P atom has a planar surrounding. Treatment of 3 a with tBuLi resulted in deprotonation of the β-C atom of the phosphaallene ( 9 ). The Li atom is bound to the P atom as demonstrated by crystal structure determination, quantum chemical calculations and reactions with HCl, Cl-SiMe₃ or Cl-PtBu₂. The thermally unstable phosphaallene Ph−P=C=C(H)-tBu gave a unique trimeric secondary product by P−P, P−C and C−C bond formation. It contains a P₂C₄ heterocycle and was isolated as a W(CO)₄ complex with two P atoms coordinated to W ( 15 ).     

Experimental Evidence of Intramolecular CAr–H···O=C Hydrogen Bonds in the Structure of (Diaryl)tetrahydrofuranones Using Spectroscopic Tools

The occurrence of bifurcate H‐bonds C_Ar–H···O=C in the structure of (diaryl)‐tetrahydrofuranones was experimentally demonstrated using different methods and techniques. The consistent increasing spin–spin coupling constants ¹J(C,H) of the ortho‐H‐atoms and low‐field shift of v_C=O in IR spectra of 2,2‐(diaryl)tetrahydrofuran‐3(2H)‐ones relative to their 5,5‐diaryl counterparts, as well as pronounced dependence of the ortho‐C–H H‐atoms chemical shifts on the temperature and solvent polarity along with X‐ray diffraction analysis data unambiguously point to the existence of weak C_Ar–H···O=C H‐bonds in these molecules.     

Different cyclic motifs in phosphoric triamides containing a C(O)NHP(O)(NH)2 skeleton and an R22(10) graph set in three new compounds: a database analysis of hydrogen‐bond strengths based on motifs

In the crystal networks of N,N′‐bis(2‐chlorobenzyl)‐N′′‐(2,6‐difluorobenzoyl)phosphoric triamide, C₂₁H₁₈Cl₂F₂N₃O₂P, (I), N‐(2,6‐difluorobenzoyl)‐N′,N′′‐bis(4‐methoxybenzyl)phosphoric triamide, C₂₃H₂₄F₂N₃O₄P, (II), and N‐(2‐chloro‐2,2‐difluoroacetyl)‐N′,N′′‐bis(4‐methylphenyl)phosphoric triamide, C₁₆H₁₇ClF₂N₃O₂P, (III), C=O...H—N_C(O)NHP(O) and P=O...H—N_amide hydrogen bonds are responsible for the aggregation of the molecules. This is the opposite result from that commonly observed for carbacylamidophosphates, which show a tendency for the phosphoryl group, rather than the carbonyl counterpart, to form hydrogen bonds with the NH group of the C(O)NHP(O) skeleton. This hydrogen‐bond pattern leads to cyclic R₂²(10) motifs in (I)–(III), different from those found for all previously reported compounds of the general formula RC(O)NHP(O)[NR¹R²]₂ with the syn orientation of P=O versus NH [R₂²(8)], and also from those commonly observed for RC(O)NHP(O)[NHR¹]₂ [a sequence of alternate R₂²(8) and R₂²(12) motifs]. In these cases, the R₂²(8) and R₂²(12) graph sets are formed through similar kinds of hydrogen bond, i.e. a pair of P=O...H—N_C(O)NHP(O) hydrogen bonds for the former and two C=O...H—N_amide hydrogen bonds for the latter. This article also reviews 102 similar structures deposited in the Cambridge Structural Database and with the International Union of Crystallography, with the aim of comparing hydrogen‐bond strengths in the above‐mentioned cyclic motifs. This analysis shows that the strongest N—H...O hydrogen bonds exist in the R₂²(8) rings of some molecules. The phosphoryl and carbonyl groups in each of compounds (I)–(III) are anti with respect to each other and the P atoms are in a tetrahedral coordination environment. In the crystal structures, adjacent molecules are linked via the above‐mentioned hydrogen bonds in a linear arrangement, parallel to [010] for (I) and (III) and parallel to [100] for (II). Formation of the N_C(O)NHP(O)—H...O=C instead of the N_C(O)NHP(O)—H...O=P hydrogen bond is reflected in the higher N_C(O)NHP(O)—H vibrational frequencies for these molecules compared with previously reported analogous compounds.     

Supramolecular assembly of H‐bonded side‐chain polymers containing conjugated pyridyl H‐acceptor pendants and various low‐band‐gap H‐donor dyes bearing cyanoacrylic acid groups for organic solar cell applications

Novel supramolecular side‐chain polymers were constructed by complexation of proton acceptor (H‐acceptor) polymers, i.e., side‐chain conjugated polymers P1–P2 containing pyridyl pendants, with low‐band‐gap proton donor (H‐donor) dyes S1–S4 (bearing terminal cyanoacrylic acids) in a proper molar ratio. Besides unique mesomorphic properties confirmed by DSC and XRD results, the H‐bonds of supramolecular side‐chain structures formed by pyridyl H‐acceptors and cyanoacrylic acid H‐donors were also confirmed by FTIR measurements. H‐donor dyes S1–S4 in solid films exhibited broad absorption peaks located in the range of 471–490 nm with optical band‐gaps of 1.99–2.14 eV. Furthermore, H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 exhibited broad absorption peaks in the range of 440–462 nm with optical band‐gaps of 2.11–2.25 eV. Under 100 mW/cm² of AM 1.5 white‐light illumination, the bulk heterojunction polymer solar cell (PSC) devices containing an active layer of H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 (as electron donors) mixed with [6,6]‐phenyl C₆₁ butyric acid methyl ester (i.e., PCBM, as an electron acceptor) in the weight ratio of 1:1 were investigated. The PSC device containing H‐bonded polymer complex P1/S3 mixed with PCBM (1:1 w/w) gave the best preliminary result with an overall power conversion efficiency (PCE) of 0.50%, a short‐circuit current of 3.17 mA/cm², an open‐circuit voltage of 0.47 V, and a fill factor of 34%. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5998–6013, 2009     

Syntheses and Spectroscopic Study of Some New N‐4‐Fluorobenzoyl Phosphoric Triamides; Crystal Structures of 4‐F‐C6H4C(O)N(H)P(O)R2, R = NH‐C(CH3)3, NH‐CH2C6H5, N(CH3)(CH2C6H5)

Some new N‐4‐Fluorobenzoyl phosphoric triamides with formula 4‐F‐C₆H₄C(O)N(H)P(O)X₂, X = NH‐C(CH₃)₃ ( 1 ), NH‐CH₂‐CH=CH₂ ( 2 ), NH‐CH₂C₆H₅ ( 3 ), N(CH₃)(C₆H₅) ( 4 ), NH‐CH(CH₃)(C₆H₅) ( 5 ) were synthesized and characterized by ¹H, ¹³C, ³¹P NMR, IR and Mass spectroscopy and elemental analysis. The structures of compounds 1 , 3 and 4 were investigated by X‐ray crystallography. The P=O and C=O bonds in these compounds are anti. Compounds 1 and 3 form one dimensional polymeric chain produced by intra‐ and intermolecular ‐P=O···H‐N‐ hydrogen bonds. Compound 4 forms only a centrosymmetric dimer in the crystalline lattice via two equal ‐P=O···H‐N‐ hydrogen bonds. ¹H and ¹³C NMR spectra show two series of signals for the two amine groups in compound 1 . This is also observed for the two α‐methylbenzylamine groups in 5 due to the presence of chiral carbon atom in molecule. ¹³C NMR spectrum of compound 4 shows that ²J(P,C_aliphatic) coupling constant for CH₂ group is greater than for CH₃ in agreement with our previous study. Mass spectra of compounds 1 ‐ 3 (containing 4‐F‐C₆H₄C(O)N(H)P(O) moiety) indicate the fragments of amidophosphoric acid and 4‐F‐C₆H₄CN⁺ that formed in a pseudo McLafferty rearrangement pathway. Also, the fragments of aliphatic amines have high intensity in mass spectra.     

Carbon Monoxide Activation by a Molecular Aluminium Imide: C−O Bond Cleavage and C−C Bond Formation

Anionic molecular imide complexes of aluminium are accessible via a rational synthetic approach involving the reactions of organo azides with a potassium aluminyl reagent. In the case of K₂[( NON )Al(NDipp)]₂ ( NON =4,5‐bis(2,6‐diisopropylanilido)‐2,7‐di‐tert‐butyl‐9,9‐dimethyl‐xanthene; Dipp=2,6‐diisopropylphenyl) structural characterization by X‐ray crystallography reveals a short Al?N distance, which is thought primarily to be due to the low coordinate nature of the nitrogen centre. The Al?N unit is highly polar, and capable of the activation of relatively inert chemical bonds, such as those found in dihydrogen and carbon monoxide. In the case of CO, uptake of two molecules of the substrate leads to C?C coupling and C≡O bond cleavage. Thermodynamically, this is driven, at least in part, by Al?O bond formation. Mechanistically, a combination of quantum chemical and experimental observations suggests that the reaction proceeds via exchange of the NR and O substituents through intermediates featuring an aluminium‐bound isocyanate fragment.     

Highly Selective and Catalytic Oxygenations of C−H and C=C Bonds by a Mononuclear Nonheme High‐Spin Iron(III)‐Alkylperoxo Species

The reactivity of a mononuclear high‐spin iron(III)‐alkylperoxo intermediate [Fe^III(t‐BuL^Urea)(OOCm)(OH₂)]²⁺( 2 ), generated from [Fe^II(t‐BuL^Urea)(H₂O)(OTf)](OTf) ( 1 ) [t‐BuL^Urea=1,1′‐(((pyridin‐2‐ylmethyl)azanediyl)bis(ethane‐2,1‐diyl))bis(3‐(tert‐butyl)urea), OTf=trifluoromethanesulfonate] with cumyl hydroperoxide (CmOOH), toward the C?H and C=C bonds of hydrocarbons is reported. 2 oxygenates the strong C?H bonds of aliphatic substrates with high chemo‐ and stereoselectivity in the presence of 2,6‐lutidine. While 2 itself is a sluggish oxidant, 2,6‐lutidine assists the heterolytic O?O bond cleavage of the metal‐bound alkylperoxo, giving rise to a reactive metal‐based oxidant. The roles of the urea groups on the supporting ligand, and of the base, in directing the selective and catalytic oxygenation of hydrocarbon substrates by 2 are discussed.     

N‐Benzylnicotinamide and N‐benzyl‐1,4‐dihydronicotinamide: useful models for NAD+ and NADH

3‐Aminocarbonyl‐1‐benzylpyridinium bromide (N‐benzylnicotinamide, BNA), C₁₃H₁₃N₂O⁺·Br⁻, (I), and 1‐benzyl‐1,4‐dihydropyridine‐3‐carboxamide (N‐benzyl‐1,4‐dihydronicotinamide, rBNA), C₁₃H₁₄N₂O, (II), are valuable model compounds used to study the enzymatic cofactors NAD(P)⁺ and NAD(P)H. BNA was crystallized successfully and its structure determined for the first time, while a low‐temperature high‐resolution structure of rBNA was obtained. Together, these structures provide the most detailed view of the reactive portions of NAD(P)⁺ and NAD(P)H. The amide group in BNA is rotated 8.4 (4)° out of the plane of the pyridine ring, while the two rings display a dihedral angle of 70.48 (17)°. In the rBNA structure, the dihydropyridine ring is essentially planar, indicating significant delocalization of the formal double bonds, and the amide group is coplanar with the ring [dihedral angle = 4.35 (9)°]. This rBNA conformation may lower the transition‐state energy of an ene reaction between a substrate double bond and the dihydropyridine ring. The transition state would involve one atom of the double bond binding to the carbon ortho to both the ring N atom and the amide substituent of the dihydropyridine ring, while the other end of the double bond accepts an H atom from the methylene group para to the N atom.     

The synergistic co‐operation of N—H…O=P hydrogen bonds and C—H…OX weak intermolecular interactions (X is =P or —C) in the (CH3O)2P(O)(NH–NHC6F5) amidophosphoester: a combined X‐ray crystallographic and theoretical study

The asymmetric unit of O,O′‐dimethyl [(2,3,4,5,6‐pentafluorophenyl)hydrazinyl]phosphonate, C₈H₈F₅N₂O₃P, is composed of two symmetry‐independent molecules with significant differences in the orientations of the C₆F₅ and OMe groups. In the crystal structure, a one‐dimensional assembly is mediated from classical N—H…O hydrogen bonds, which includes R₂²(8), D(2) and some higher‐order graph‐set motifs. By also considering weak C—H…O=P and C—H…O—C intermolecular interactions, a two‐dimensional network extends along the ab plane. The strengths of the hydrogen bonds were evaluated using quantum chemical calculations with the GAUSSIAN09 software package at the B3LYP/6‐311G(d,p) level of theory. The LP(O) to σ*(NH) and σ*(CH) charge‐transfer interactions were examined according to second‐order perturbation theory in natural bond orbital (NBO) methodology. The hydrogen‐bonded clusters of molecules, including N—H…O and C—H…O interactions, were constructed as input files for the calculations and the strengths of the hydrogen bonds are as follows: N—H…O [R₂²(8)] > N—H…O [D(2)] > C—H…O. The decomposed fingerprint plots show that the contribution portions of the F…H/H…F contacts in both molecules are the largest.     

Oxydifluoromethylation of Alkenes by Photoredox Catalysis: Simple Synthesis of CF2H‐Containing Alcohols

We have developed a novel and simple protocol for the direct incorporation of a difluoromethyl (CF₂H) group into alkenes by visible‐light‐driven photoredox catalysis. The use of fac‐[Ir(ppy)₃] (ppy=2‐pyridylphenyl) photocatalyst and shelf‐stable Hu's reagent, N‐tosyl‐S‐difluoromethyl‐S‐phenylsulfoximine, as a CF₂H source is the key to success. The well‐designed photoredox system achieves synthesis of not only β‐CF₂H‐substituted alcohols but also ethers and an ester from alkenes through solvolytic processes. The present method allows a single‐step and regioselective formation of C(sp³)–CF₂H and C(sp³)?O bonds from C=C moiety in alkenes, such as hydroxydifluoromethylation, regardless of terminal or internal alkenes. Moreover, this methodology tolerates a variety of functional groups.     

Facile P−C/C−H Bond‐Cleavage Reactivity of Nickel Bis(diphosphine) Complexes

Unusual cleavage of P?C and C?H bonds of the P₂N₂ ligand, in heteroleptic [Ni(P₂N₂)(diphosphine)]²⁺ complexes under mild conditions, results in the formation of an iminium formyl nickelate featuring a C,P,P‐tridentate coordination mode. The structures of both the heteroleptic [Ni(P₂N₂)(diphosphine)]²⁺ complexes and the resulting iminium formyl nickelate have been characterized by NMR spectroscopy and single‐crystal X‐ray diffraction analysis. Density functional theory (DFT) calculations were employed to investigate the mechanism of the P?C/C?H bond cleavage, which involves C?H bond cleavage, hydride rotation, Ni?C/P?H bond formation, and P?C bond cleavage.     

Switching the Mechanism of NADH Photooxidation by Supramolecular Interactions

A series of three Ru(II) polypyridine complexes was investigated for the selective photocatalytic oxidation of NAD(P)H to NAD(P)⁺ in water. A combination of (time-resolved) spectroscopic studies and photocatalysis experiments revealed that ligand design can be used to control the mechanism of the photooxidation: For prototypical Ru(II) complexes a ¹O₂ pathway was found. Rudppz ([(tbbpy)₂Ru(dppz)]Cl₂, tbbpy=4,4'-di-tert-butyl-2,2'-bipyridine, dppz=dipyrido[3,2-a:2′,3′-c]phenazine), instead, initiated the cofactor oxidation by electron transfer from NAD(P)H enabled by supramolecular binding between substrate and catalyst. Expulsion of the photoproduct NAD(P)⁺ from the supramolecular binding site in Rudppz allowed very efficient turnover. Therefore, Rudppz permits repetitive selective assembly and oxidative conversion of reduced naturally occurring nicotinamides by recognizing the redox state of the cofactor under formation of H₂O₂ as additional product. This photocatalytic process can fuel discontinuous photobiocatalysis.     

[FeIII(F20‐tpp)Cl] Is an Effective Catalyst for Nitrene Transfer Reactions and Amination of Saturated Hydrocarbons with Sulfonyl and Aryl Azides as Nitrogen Source under Thermal and Microwave‐Assisted Conditions

[Fe^III(F₂₀‐tpp)Cl] (F₂₀‐tpp=meso‐tetrakis(pentafluorophenyl)porphyrinato dianion) is an effective catalyst for imido/nitrene insertion reactions using sulfonyl and aryl azides as nitrogen source. Under thermal conditions, aziridination of aryl and alkyl alkenes (16 examples, 60–95 % yields), sulfimidation of sulfides (11 examples, 76–96 % yields), allylic amidation/amination of α‐methylstyrenes (15 examples, 68–83 % yields), and amination of saturated C? H bonds including that of cycloalkanes and adamantane (eight examples, 64–80 % yields) can be accomplished by using 2 mol % [Fe^III(F₂₀‐tpp)Cl] as catalyst. Under microwave irradiation conditions, the reaction time of aziridination (four examples), allylic amination (five examples), sulfimidation (two examples), and amination of saturated C? H bonds (three examples) can be reduced by up to 16‐fold (24–48 versus 1.5–6 h) without significantly affecting the product yield and substrate conversion.     

6,6′‐Di­methoxy‐2,2′‐[(1R,2R)‐cyclo­hexane‐1,2‐diyl­bis­(nitrilo­methyl­idyne)]­diphenol: three C—H⃛O hydrogen bonds generate a three‐dimensional framework

Molecules of the title compound, alternatively called (R,R)‐N,N′‐bis(3‐methoxysalicylidene)‐trans‐cyclohexane‐1,2‐diamine, C₂₂H₂₆N₂O₄, contain two intramolecular O—H⃛N hydrogen bonds and adopt a conformation with approximate twofold rotational symmetry. The mol­ecules are linked by three C—H⃛O hydrogen bonds [H⃛O = 2.45–2.55 Å, C⃛O = 3.329 (2)–3.398 (2) Å and C—H⃛O = 142–172°] into a continuous framework.