An FTIR Spectroscopic Study on the Effect of Molecular Structural Variations on the CO2 Absorption Characteristics of Heterocyclic Amines

Herein, the reaction between CO₂ and piperidine, as well as commercially available functionalised piperidine derivatives, for example, those with methyl‐, hydroxyl‐ and hydroxyalkyl substituents, has been investigated. The chemical reactions between CO₂ and the functionalised piperidines were followed in situ by using attenuated total reflectance (ATR) FTIR spectroscopy. The effect of structural variations on CO₂ absorption was assessed in relation to the ionic reaction products identifiable by IR spectroscopy, that is, carbamate versus bicarbonate absorbance, CO₂ absorption capacity and the mass‐transfer coefficient at zero loading. On absorption of CO₂, the formation of the carbamate derivatives of the 3‐ and 4‐hydroxyl‐, 3‐ and 4‐hydroxymethyl‐, and 4‐hydroxyethyl‐substituted piperidines were found to be kinetically less favourable than the carbamate derivatives of piperidine and the 3‐ and 4‐methyl‐substituted piperidines. As the CO₂ loading of piperidine and the 3‐ and 4‐methyl‐ and hydroxyalkyl‐substituted piperidines exceeded 0.5 moles of CO₂ per mole of amine, the hydrolysis of the carbamate derivative of these amines was observed in the IR spectra collected. From the subset of amines analysed, the 2‐alkyl‐ and 2‐hydroxyalkyl‐substituted piperidines were found to favour bicarbonate formation in the reaction with CO₂. Based on IR spectral data, the ability of these amines to form the carbamate derivatives was also established. Computational calculations at the B3LYP/6‐31+G** and MP2/6‐31+G** levels of theory were also performed to investigate the electronic/steric effects of the substituents on the reactivity (CO₂ capture performance) of different amines, as well as their carbamate structures. The theoretical results obtained for the 2‐alkyl‐ and 2‐hydroxyalkyl‐substituted piperidines suggest that a combination of both the electronic effect exerted by the substituent and a reduction in the exposed area of the nitrogen atom play a role in destabilising the carbamate derivative and increasing its susceptibility to hydrolysis. A theoretical investigation into the structure of the carbamate derivatives of these amines revealed shorter N? C bond lengths and a less‐delocalised electron distribution in the carboxylate moiety.     

Nickel(0)‐Catalyzed Hydroalkenylation of Imines with Styrene and Its Derivatives

A nickel(0)‐catalyzed hydroalkenylation of imines with styrene and its derivatives is described. A wide range of aromatic and aliphatic imines directly coupled with styrene and its derivatives, thus providing various synthetically useful allylic amines with up to 95 % yield. The reaction offers a new atom‐ and step‐economical approach to allylic amines by using alkenes instead of alkenyl‐metallic reagents. Experiments and DFT calculations showed that TsNH₂ promotes the proton transfer from the coordinated olefin to the imine, accompanied by a new C?C bond formation.     

Acyclic Branched α‐Fluoro Ketones for the Direct Asymmetric Mannich Reaction Leading to the Synthesis of β‐Tetrasubstituted β‐Fluoro Amines

The preparation of acyclic β‐fluoro amines bearing tetrasubstituted fluorine stereocenters is described via a direct Zn/ProPhenol‐catalyzed Mannich reaction. The reaction utilizes branched vinyl or alkynyl α‐fluoro ketones that can be coupled with a range of aryl, heteroaryl, vinyl, or cyclopropyl aldimines in high yield and with excellent diastereo‐ (up to >20:1) and enantioselectivity (up to 99 %). The use of readily cleaved tert‐butoxycarbonyl (Boc) or carboxybenzyl (Cbz) imine protecting groups adds utility to the reaction by allowing for easy access to the free amine products under mild and chemoselective reaction conditions.     

Highly Enantioselective Fluorescent Recognition of Both Unfunctionalized and Functionalized Chiral Amines by a Facile Amide Formation from a Perfluoroalkyl Ketone

The H₈BINOL‐based perfluoroalkyl ketone (S)‐ 2 is found to exhibit highly enantioselective fluorescent enhancements toward both unfunctionalized and functionalized chiral amines. It greatly expands the substrate scope of the corresponding BINOL‐based sensor. A dramatic solvent effect was observed for the reaction of the amines with compound (S)‐ 2 . In DMF, cleavage of the perfluoroalkyl group of compound (S)‐ 2 to form amides was observed but not in other solvents, such as methylene chloride, chloroform, THF, hexane, and perfluorohexane. Thus, the addition of another solvent, such as THF, can effectively quench the reaction of compound (S)‐ 2 with amines in DMF to allow stable fluorescent measurement. This is the first example that the formation of strong amide bonds under very mild conditions is used for the enantioselective recognition of chiral amines. The mechanism of the reaction of compound (S)‐ 2 with chiral amines is investigated by using various analytical methods including mass spectrometry as well as NMR and UV/Vis absorption spectroscopy.     

Construction of Optically Active Quaternary Propargyl Amines by Highly Enantioselective Zinc/BINOL‐Catalyzed Alkynylation of Ketoimines

A general and efficient method for the highly enantioselective alkynylation of ketoimines through a zinc/1,1′‐bi‐2‐naphthol (BINOL)‐catalyzed process has been developed. A variety of ketoimines, including α‐fluoroalkyl α‐imine esters, α‐aryl α‐imine esters, and trifluoromethyl aryl ketoimines, are applicable and provide their corresponding quaternary propargyl amines in excellent yields with high ee values (up to 99 % ee). Both the steric and electronic effects of substituents at the 3,3′ positions of BINOL are critical for the reaction efficiency and enantioselectivity. To demonstrate the usefulness of the method, (R)‐α‐CF₃ α‐proline has been prepared in a highly efficient manner. The notable features of this protocol are its broad substrate scope, high reaction efficiency (up to 99 %) and enantioselectivity (up to 99 % ee), low catalyst loading (5 mol % of BINOL derivative), and mild reaction conditions.     

Enzymatic Resolution of O‐(Methoxymethyl)‐Protected Tropane‐diols

A convenient synthetic route to enantiomerically pure tropane‐diol building blocks is described. The reaction sequence started from tropenone derivatives 1 , which were dihydroxylated to give 6,7‐dihydroxytropanone derivatives 2 . After introduction of the methoxymethyl (MOM) protecting group in diol 2a , a lipase‐mediated resolution of the resulting racemic mono‐MOM ether (±)‐ 5d with vinyl acetate and vinyl trifluoroacetate gave the acetates (?)‐ 6d and (?)‐ 6f , respectively, with 96–99% ee, and MOM ether (+)‐ 5d with up to 89% ee. Deacetylation of (?)‐ 6d afforded quantitatively MOM ether (?)‐ 5d with 99% ee, the absolute configuration of which was assigned via the modified Mosher method to be (R) at C(6). Enzymatic treatment of unprotected diol 2a with vinyl trifluoroacetate or alkoxycarbonylation resulted in the formation of C_s‐symmetrical products 9 and 12 rather than the desired desymmetrized derivatives.     

Consecutive Intermolecular Reductive Amination/Asymmetric Hydrogenation: Facile Access to Sterically Tunable Chiral Vicinal Diamines and N‐Heterocyclic Carbenes

A highly enantioselective iridium‐ or ruthenium‐catalyzed intermolecular reductive amination/asymmetric hydrogenation relay with 2‐quinoline aldehydes and aromatic amines has been developed. A broad range of sterically tunable chiral N,N′‐diaryl vicinal diamines were obtained in high yields (up to 95 %) with excellent enantioselectivity (up to >99 % ee). The resulting chiral diamines could be readily transformed into sterically hindered chiral N‐heterocyclic carbene (NHC) precursors, which are otherwise difficult to access. The usefulness of this synthetic approach was further demonstrated by the successful application of one of the chiral vicinal diamines and chiral NHC ligands in a transition‐metal‐catalyzed asymmetric Suzuki–Miyaura cross‐coupling reaction and asymmetric ring‐opening cross‐metathesis, respectively.     

A versatile Ru catalyst for the asymmetric transfer hydrogenation of both aromatic and aliphatic sulfinylimines

A highly efficient Ru catalyst based on an achiral, very simple, and inexpensive amino alcohol ligand (2‐amino‐2‐methylpropan‐1‐ol) has been developed for the asymmetric transfer hydrogenation (ATH) of chiral N‐(tert‐butylsulfinyl)imines. This complex is able to catalyze the ATH of both aromatic and the most challenging aliphatic sulfinylimines by using isopropyl alcohol as the hydrogen source. The diastereoselective reduction of aromatic, heteroaromatic, and aliphatic sulfinylketimines, including sterically congested cases, over short reaction times (1–4 h), followed by desulfinylation of the nitrogen atom, affords the corresponding highly enantiomerically enriched (ee up to >99 %) α‐branched primary amines in excellent yields. The same ligand was equally effective for the synthesis of both (R)‐ and (S)‐amines by using the appropriate absolute configuration in the iminic substrate. DFT mechanistic studies show that the hydrogen‐transfer process is stepwise. Moreover, the origin of the diastereoselectivity has been rationalized.     

Biocompatible SuFEx Click Chemistry: Thionyl Tetrafluoride (SOF4)‐Derived Connective Hubs for Bioconjugation to DNA and Proteins

We report here the development of a suite of biocompatible SuFEx transformations from the SOF₄‐derived iminosulfur oxydifluoride hub in aqueous buffer conditions. These biocompatible SuFEx reactions of iminosulfur oxydifluorides (R‐N=SOF₂) with primary amines give sulfamides (8 examples, up to 98 %), while the reaction with secondary amines furnish sulfuramidimidoyl fluoride products (8 examples, up to 97 %). Likewise, under mild buffered conditions, phenols react with the iminosulfur oxydifluorides (Ar‐N=SOF₂) to produce sulfurofluoridoimidates (13 examples, up to 99 %), which can themselves be further modified by nucleophiles. These transformations open the potential for asymmetric and trisubstituted linkages projecting from the sulfur(VI) center, including versatile S?N and S?O connectivity (9 examples, up to 94 %). Finally, the SuFEx bioconjugation of iminosulfur oxydifluorides to amine‐tagged single‐stranded DNA and to BSA protein demonstrate the potential of SOF₄‐derived SuFEx click chemistry in biological applications.     

Selective Palladium‐Catalyzed Aminocarbonylation of Olefins to Branched Amides

A general and efficient protocol for iso‐selective aminocarbonylation of olefins with aliphatic amines has been developed for the first time. Key to the success for this process is the use of a specific 2‐phosphino‐substituted pyrrole ligand in the presence of PdX₂ (X=halide) as a pre‐catalyst. Bulk industrial and functionalized olefins react with various aliphatic amines, including amino‐acid derivatives, to give the corresponding branched amides generally in good yields (up to 99 %) and regioselectivities (b/l up to 99:1).     

Highly efficient and diastereoselective gold(I)-catalyzed synthesis of tertiary amines from secondary amines and alkynes: substrate scope and mechanistic insights

An efficient method for the synthesis of tertiary amines through a gold(I)‐catalyzed tandem reaction of alkynes with secondary amines has been developed. In the presence of ethyl Hantzsch ester and [{(tBu)₂(o‐biphenyl)P}AuCl]/AgBF₄ (2 mol %), a variety of secondary amines bearing electron‐deficient and electron‐rich substituents and a wide range of alkynes, including terminal and internal aryl alkynes, aliphatic alkynes, and electron‐deficient alkynes, underwent a tandem reaction to afford the corresponding tertiary amines in up to 99 % yield. For indolines bearing a preexisting chiral center, their reactions with alkynes in the presence of ethyl Hantzsch ester catalyzed by [{(tBu)₂(o‐biphenyl)P}AuCl]/AgBF₄ (2 mol %) afforded tertiary amines in excellent yields and with good to excellent diastereoselectivity. All of these organic transformations can be conducted as a one‐pot reaction from simple and readily available starting materials without the need of isolation of air/moisture‐sensitive enamine intermediates, and under mild reaction conditions (mostly room temperature and mild reducing agents). Mechanistic studies by NMR spectroscopy, ESI‐MS, isotope labeling studies, and DFT calculations on this gold(I)‐catalyzed tandem reaction reveal that the first step involving a monomeric cationic gold(I)–alkyne intermediate is more likely than a gold(I)–amine intermediate, a three‐coordinate gold(I) intermediate, or a dinuclear gold(I)–alkyne intermediate. These studies also support the proposed reaction pathway, which involves a gold(I)‐coordinated enamine complex as a key intermediate for the subsequent transfer hydrogenation with a hydride source, and reveal the intrinsic stereospecific nature of these transformations observed in the experiments.     

Selected Reactions of Diethyl (E)‐1‐(bromomethyl)‐2‐cyanovinylphosphonate with Secondary and Tertiary Amines

An easy regio‐ and stereoselective synthesis of new nitrogenous molecules 2a–e was successfully realized via an effective coupling reaction of diethyl (E)‐1‐(bromomethyl)‐2‐cyanovinylphosphonate 1 with various secondary amines in methanol. Hence, the use of less and more bulky secondary amines gives rise, respectively, to the successive (S_N2′) substitution–isomerization and (S_N2) substitution derivatives 2a–c and 2d–e . Moreover, the addition of tertiary amines to 1 in the same reaction conditions, leads exclusively to the rearranged vinyl ether 3 in good yields.     

A Synthetic Route to Chiral Dihydrobenzothiazines through Ring Opening of Activated Aziridines with 2‐Halothiophenols/Copper‐Powder‐Mediated C−N Cyclization

A simple protocol for the synthesis of dihydrobenzothiazines through regio‐ and stereoselective S_N2‐type ring opening of N‐tosylaziridines with sulfur nucleophiles followed by copper‐powder‐mediated intramolecular C?N cyclization in excellent yields (up to 95 %) with high diastereo‐ and enantioselectivity (up to >99 %) is reported.     

Highly Enantioselective Aza‐Michael Reaction between Alkyl Amines and β‐Trifluoromethyl β‐Aryl Nitroolefins

The aza‐Michael addition reaction is a vital transformation for the synthesis of functionalized chiral amines. Despite intensive research, enantioselective aza‐Michael reactions with alkyl amines as the nitrogen donor have not been successful. We report the use of chiral N‐heterocyclic carbenes (NHCs) as noncovalent organocatalysts to promote a highly selective aza‐Michael reaction between primary alkyl amines and β‐trifluoromethyl β‐aryl nitroolefins. In contrast to classical conjugate‐addition reactions, a strategy of HOMO‐raising activation was used. Chiral trifluoromethylated amines were synthesized in high yield (up to 99 %) with excellent enantioselectivity (up to 98 % ee).     

Asymmetric Catalytic Hydroamination of Activated Olefins in Ionic Liquids

The addition of a series of both aliphatic and aromatic amines to electron‐poor olefins was investigated using [Ni(Pigiphos)(THF)]²⁺ as catalyst (with different counterions) in various ionic liquids based on imidazolium‐ and picolinium‐salt derivatives. The catalysts gave rise to selectivities comparable to those obtained when the reaction was conducted in neat organic solvents (ee up to 66%), but significant higher activities, with a total turnover number (TON) of up to 300.     

Synthese von neuen (Phenylalkyl)aminen zur Untersuchung von Struktur‐Aktivitätsbeziehungen,Mitteilung 1, Mescalin Derivate

Synthesis of Novel (Phenylalkyl)amines for the Investigation of Structure–Activity Relationships. Part 1. Mescalin Derivatives . The synthesis and the spectroscopic data of 14 novel 4‐substituted mescaline derivatives are reported. Starting from syringaldehyde (=4‐hydroxy‐3,5‐dimethoxybenzaldehyde), several ethers were obtained from reaction with a series of corresponding saturated and unsaturated alkyl‐ and fluoroalkyl halides. Henry‐reaction with MeNO₂ or EtNO₂ followed to afford the nitro‐olefines, which were then reduced with AlH₃ to the desired 2‐phenylethyl‐ and 1‐methyl‐2‐phenylethylamine derivatives.     

Chemical‐Reductant‐Free Electrochemical Deuteration Reaction using Deuterium Oxide

We report a method for the electrochemical deuteration of α,β‐unsaturated carbonyl compounds under catalyst‐ and external‐reductant‐free conditions, with deuteration rates as high as 99 % and yields up to 91 % in 2 h. The use of graphite felt for both the cathode and the anode was key to ensuring chemoselectivity and high deuterium incorporation under neutral conditions without the need for an external reductant. This method has a number of advantages over previously reported deuteration reactions that use stoichiometric metallic reductants. Mechanistic experiments showed that O₂ evolution at the anode not only eliminates the need for an external reductant but also regulates the pH of the reaction mixture, keeping it approximately neutral.     

Catalytic Enantioselective Synthesis of Allylic Boronates Bearing a Trisubstituted Alkenyl Fluoride and Related Derivatives

The first catalytic method for diastereo‐ and enantioselective synthesis of allylic boronates bearing a Z‐trisubstituted alkenyl fluoride is disclosed. Boryl substitution is performed with either a Z‐ or E‐allyldifluoride and is catalyzed by bisphosphine/Cu complexes, affording products in up to 99 % yield with >98:2 Z/E selectivity and 99:1 enantiomeric ratio. A variety of subsequent modifications are feasible, and notable examples are diastereoselective additions to aldehydes/aldimines to access homoallylic alcohols/amines containing a fluorosubstituted stereogenic quaternary center.     

Nitropyridines,their synthesis and reactions

Reaction of pyridine and substituted pyridines with N₂O₅ in an organic solvent gives the N‐nitropyridinium ion. When this is reacted with SO₂/HSO₃‐ in water, 3‐nitropyridine is obtained (77 % yield). With substituted pyridines the method gives good yields for 4‐substituted and moderate yields for 3‐substituted pyridines. The reaction mechanism is not an electrophilic aromatic substitution but one in which the nitro group migrates from the 1‐position to the 3‐position by a [1,5] sigmatropic shift. From 3‐nitropyridine, 5‐nitropyridine‐2‐sulfonic acid is formed in a two step reaction. From this, a series of 2‐substituted‐5‐nitropyridines has been synthesized. 3‐Nitropyridine and 4‐substituted‐3‐nitropyridines have been substituted with ammonia and amines by the vicarious nucleophilic substitution (VNS) method with ammonia and amines and by the oxidative substitution method in the position para to the nitro group. High regioselectivities and yields have been obtained in both cases to afford a series of 4‐substituted‐2‐alkylamino‐5‐nitropyridines. The VNS method has also been used in alkylation reactions with 3‐nitropyridines to form dichloromethyl‐and alkoxycarbomethyl‐β‐nitropyridines. From the appropriate substituted nitropyridines imidazopyridines and azaindoles have been formed.     

Graphite‐Supported Gold Nanoparticles as Efficient Catalyst for Aerobic Oxidation of Benzylic Amines to Imines and N‐Substituted 1,2,3,4‐Tetrahydroisoquinolines to Amides: Synthetic Applications and Mechanistic Study

Selective oxidation of amines using oxygen as terminal oxidant is an important area in green chemistry. In this work, we describe the use of graphite‐supported gold nanoparticles (AuNPs/C) to catalyze aerobic oxidation of cyclic and acyclic benzylic amines to the corresponding imines with moderate‐to‐excellent substrate conversions (43–100 %) and product yields (66–99 %) (19 examples). Oxidation of N‐substituted 1,2,3,4‐tetrahydroisoquinolines in the presence of aqueous NaHCO₃ solution gave the corresponding amides in good yields (83–93 %) with high selectivity (up to amide/enamide=93:4) (6 examples). The same protocol can be applied to the synthesis of benzimidazoles from the reaction of o‐phenylenediamines with benzaldehydes under aerobic conditions (8 examples). By simple centrifugation, AuNPs/C can be recovered and reused for ten consecutive runs for the oxidation of dibenzylamine to N‐benzylidene(phenyl)methanamine without significant loss of catalytic activity and selectivity. This protocol “AuNPs/C+O₂” can be scaled to the gram scale, and 8.9 g (84 % isolated yield) of 3,4‐dihydroisoquinoline can be obtained from the oxidation of 10 g 1,2,3,4‐tetrahydroisoquinoline in a one‐pot reaction. Based on the results of kinetic studies, radical traps experiment, and Hammett plot, a mechanism involving the hydrogen‐transfer reaction from amine to metal and oxidation of M‐H is proposed.