Ultrafast organocatalytic ring-opening polymerization of N-sulfonyl aziridine in the melt

An ultrafast approach for controlled synthesis of well-defined polysulfonamides is established through organocatalytic anionic ring-opening polymerization (ROP) of N-sulfonyl aziridine in the melt. Several different organobases are investigated, and it is found that N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalyzed ROP of 2-methyl-N-tosylaziridine (TsMAz) gives the desired polymer, while 1,4-diazabicyclo[2.2.2]octane (DABCO) and 1,8-diazabicyclo[5.4.0]-undec-7-ene (DBU) initiate the polymerization along with initiator to produce uncontrolled polymers. Using PMDETA as the catalyst, poly(2-methyl-N-tosylaziridine) with molecular weight over 100 kg/mol can be synthesized in less than 90 s. Various initiators, including carboxylic acid, N-sulfonyl amide, unactivated amine, phenol, and thiol, are applicable for this protocol to give the molecular weight and end-group controlled polymers under the open-flask condition. Combining this ultrafast ROP with ring-opening metathesis polymerization (ROMP), a brush copolymer is facile synthesized. This approach allows the ultrafast metal-free synthesis of polysulfonamide and expands the scope of initiators for the ROP of N-sulfonyl aziridines.     

Effect of variation of [PMDETA]0/[Cu(I)Br]0 ratio on atom transfer radical polymerization of n‐butyl acrylate

A kinetic study was conducted to examine the effect of varying the ratio of ligand to transition metal in a Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) catalyst system for atom transfer radical polymerization (ATRP) of n‐butyl acrylate (nBA) using methyl 2‐bromopropionate as the initiator. Experimental molecular weights were higher than theoretical when low molecular weight polymers were targeted at low ratios of [PMDETA]₀/[Cu(I)Br]₀ (< 1), indicating inefficient initiation/deactivation. A downward curvature in the plot of M_n versus conversion was observed at high monomer conversion when targeting high molecular weight polymers. This deviation became more significant when an excess of ligand was used, indicating a contribution of chain transfer to ligand. The maximum rate of polymerization was obtained at [PMDETA]₀/[Cu(I)Br]₀ ≈ 0.5 for bulk ATRP of nBA; however for polymerization in the presence of 10 vol% DMF, the maximum appeared at the ratio ≈ 1:1. Addition of acetone or DMF improved solubility of Cu(II) complex, which consequently improved the level of control over the polymerization at low ratios of [PMDETA]₀/[Cu(I)Br]₀, but also reduced the reaction rate. The polymerization rate increased with temperature, but at the expense of increased polydispersities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3285–3292, 2004     

One-pot tandem ring-opening polymerization of N-sulfonyl aziridines and “click” chemistry to produce well-defined star-shaped polyaziridines

An effective approach for fast synthesis of well-defined star-shaped poly(2-methyl-N-tosylaziridine)s was developed by one-pot tandem ring-opening polymerization (ROP) of N-sulfonyl aziridines with trimethylsilyl azide (TMSN₃) and “click” reaction with alkynes. Azido terminated polyaziridines (α-N₃-PAzs) could be achieved via ROP of N-sulfonyl aziridines with TMSN₃ in the presence of organic superbases. The catalytic efficiency of organobases, including 1,4-diazabicyclo[2.2.2]octane (DABCO), 1,8-diazabicyclo[5.4.0]-7-undecene (DBU), 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (MTBD), 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), and N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), was evaluated, and all of them except TBD afforded “living”/controlled ROP of 2-methyl-N-tosylaziridines (TsMAz). Star-shaped polyaziridines were then fastly synthesized by the one-pot tandem strategy. During the reaction process, PMDETA catalyzed ROP first, then was triggered to be a ligand by adding CuBr for “click” reaction. Well-defined 3- and 4-arm star P(TsMAz)s were successfully prepared, and subsequently desulfonylated to give star-shaped polypropylenimines (PPIs). PPI stars exhibited intrinsic photoluminescence properties from the polyamine arms.     

Atom Transfer Radical Polymerization (ATRP) of Ethyl Acrylate: Its Mechanistic Studies

Atom transfer radical polymerization (ATRP) of ethyl acrylate was carried out in bulk using ethyl 2-bromoisobutyrate as initiator, CuBr as well as CuCl as catalyst in combination with different ligands e.g., 2,2′ bipyridine (bpy)andN,N, N′,N″,N″-pentamethyldiethylenetriamine (PMDETA). In most of the cases very high conversion (72–98%) was achieved. The polymerization was well controlled with a linear increase of molecular weight (M_n^SEC) with conversion and relatively narrow molecular weight distributions (polydispersity index 1.2–1.3). Use of PMDETA as the ligand resulted in faster polymerization rate (98% conversion in 1 h) than those using bipyridine (72% conversion in 5 h). The MALDI-TOF-MS analysis of poly (ethyl acrylate) (PEA) prepared by using bpy as ligand showed the presence of halogen as the end group. On the contrary, when PMDETA was used as the ligand, the mass analysis showed no trace of this end group.     

Exploration of Novel Pyrene Labeled Amphiphilic Block Copolymers: Synthesis Via ATRP,Characterization and Properties

A novel initiator containing pyrene, a fluorescent moiety, was prepared by reacting 1-aminopyrene and 2-bromoisobutyl bromide. The structure elucidation of the new initiator was carried out using various spectroscopic tools, as well as through single crystal X-ray diffraction studies. Novel, fluorescent amphiphilic block copolymers with a pyrene end-group, poly(styrene-b-acrylic acid) [P(S-b-AA)], poly(methyl methacrylate-b-dimethylaminoethyl methacrylate) [P(MMA-b-DMAEMA)], poly(styrene-b-tert-butyl acrylate) [P(S-b?t-BA)], poly(styrene-b-dimethylaminoethyl methacrylate) [P(S-b-DMAEMA)] were successfully synthesized by the atom transfer radical polymerization (ATRP) method, using CuBr as the catalyst and N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/N,N,N′,N″,N″-hexamethyltriethylenetetramine (HMTETA) as the complexing agent. The polymers were characterized by GPC, ¹H-NMR, IR and UV-Vis spectroscopies. It was observed that as the polymerization time increased, both the conversion and the molecular weight increased linearly with time. The fluorescence properties of the polymers prepared were recorded. The physical properties and especially the pH dependent swelling properties of the amphiphilic block copolymers have been investigated. The utility of the block copolymers in the formation of stable dispersion of cadmium sulphide nanoparticles was investigated as a model study.     

Atom Transfer Radical Polymerization of Methyl Methacrylate with α,α,α′,α′‐Tetrachloroxylene as an Initiator

The homogeneous ATRP of methyl methacrylate (MMA) using α,α,α′,α′‐tetrachloroxylene (TCX)/CuCl/N,N,N′,N″,N″–pentamethyldiethylenetriamine (PMDETA) as the initiating system has been successfully carried out. The kinetic plots showed first order relationship vs. monomer concentration. Well‐controlled polymerizations with low polydispersities (M_w/M_n=1.15?1.25) polymers have been achieved. The molecular weights increased linearly with monomer conversions and were close to the theoretical values, indicating high initiation efficiency. The polymerization rate increased significantly with an increase of TCX concentration. The rate of polymerization was about 0.6 orders with respect to the concentration of initiator. The polymerization rate increased significantly with an increase of CuCl concentration. The dependence of ln k_p ^app on ln ([CuCl]₀) indicated a 0.91 order. The apparent activation energy was calculated ΔE_app ^≠=43.3 KJ/mol, and the enthalpy of the equilibrium, ΔH_eq ⁰, was estimated to be 21.1 KJ/mol. The structure of obtained PMMA was analyzed by means of ¹H NMR spectroscopy. The result proved that the TCX acted as a bifunctional initiator for ATRP of MMA.     

CuBr/PMDETA combined with triethanolamine as an economic and highly active catalyst for atom transfer radical polymerization

CuBr ligated with N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) is a common catalyst for atom transfer radical polymerization (ATRP). A catalyst/initiator ratio of 0.5–1 is generally required for most CuBr/PMDETA-catalyzed polymerizations, leading to high catalyst loading and high cost of post-polymerization purification. In this work, triethanolamine is found to drastically improve the catalytical performance of CuBr/PMDETA and the strong promotion effects of triethanolamine on ATRP of methyl acrylate (MA), methyl methacrylate (MMA) and styrene (St) have been investigated. In the presence of triethanolamine, the catalyst loading of CuBr/PMDETA is substantially reduced from a normal catalyst/initiator ratio of 1 to 0.01, 0.05 and 0.05 respectively in the polymerization of MA, MMA and St. As CuBr/PMDETA is one of the cheapest ATRP catalysts, the combination of CuBr/PMDETA with triethanolamine further markedly decreases the catalyst consumption and reduces the cost of post-purification for ATRP at large scales, and therefore is promising for potential industrial applications.     

Synthesis of 4μ‐PS2PEO2, 4μ‐PS2PCL2, 4μ‐PI2PEO2, and 4μ‐PI2PCL2 star‐shaped copolymers by the combination of glaser coupling with living anionic polymerization and ring‐opening polymerization

4μ‐A₂B₂ star‐shaped copolymers contained polystyrene (PS), poly(isoprene) (PI), poly(ethylene oxide) (PEO) or poly(ε‐caprolactone) (PCL) arms were synthesized by a combination of Glaser coupling with living anionic polymerization (LAP) and ring‐opening polymerization (ROP). Firstly, the functionalized PS or PI with an alkyne group and a protected hydroxyl group at the same end were synthesized by LAP and then modified by propargyl bromide. Subsequently, the macro‐initiator PS or PI with two active hydroxyl groups at the junction point were synthesized by Glaser coupling in the presence of pyridine/CuBr/N,N,N ′,N ″,N ″‐penta‐methyl diethylenetri‐amine (PMDETA) system and followed by hydrolysis of protected hydroxyl groups. Finally, the ROP of EO and ε‐CL monomers was carried out using diphenylmethyl potassium (DPMK) and tin(II)‐bis(2‐ethylhexanoate) (Sn(Oct)₂) as catalyst for target star‐shaped copolymers, respectively. These copolymers and their intermediates were well characterized by SEC, ¹H NMR, MALDI‐TOF mass spectra and FT‐IR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

CONTROLLED/"LIVING" RADICAL POLYMERIZATION OF STYRENE IN AN AQUEOUS DISPERSION SYSTEM

Atom transfer radical polymerization (ATRP) of styrene catalyzed by cuprous (CuX)/1, 10-phenanthroline (Phen)and CuX/CuX_2/Phen was conducted in an aqueous dispersed system. A stable latex was obtained by using ionic surfactantsodium lauryl sulfonate (SLS) or composite surfactants, such as SLS/polyoxyethylene nonyl phenyl ether (OP-10),SLS/hexadecanol and SLS/OP-10/hexadecanol. Among which SLS and SLS/OP-10/hexadecanol systems established betterdispersed effect during the polymerization. It was found that Phen was a more suitable ligand than N,N,N',N",N"-pentamethyldiethylenetriamine (PMDETA) to maintain an appropriate equilibrium of the activator Cu(I) and the deactivatorCu(II) between the organic phase and the water phase. The effect of several initiators (such as EBiB, CCl_4 and 1-PEBr) andthe temperature on such a kind of ATRP system was also observed. The number-average molar mass (M_n) of polystyrene (PS)increased with the conversion and the molar mass distribution (M_w/M_n) remained narrow. These experimental data show thatthe polymerization could be controlled except for the quick increase of monomer conversion and the number-average molarmass of PS in the initial stage of polymerization. Furthermore, the initiator efficiency was found to be low (～57%) inCuX/Phen catalyzed system. To overcome this problem, Cu(II)X_2 (20 mol%-50 mol% based on CuX) was introduced intothe polymerization system. In this case, higher initiator efficiency (60%-90%), low M_w/M_n of PS (as low as 1.08) wereachieved and the molar masses of the PS fit with the theoretical ones.     

Thiophenol derivatives as a reducing agent for in situ generation of Cu(I) species via electron transfer reaction in copper‐catalyzed living/controlled radical polymerization of styrene

The copper‐catalyzed living radical polymerization (LRP) of styrene (St) was carried out in the presence of thiophenol derivative such as sodium thiophenolate (PhSNa) or p‐methoxythiophenol as a reducing agent for Cu(II) by using either 1‐chloro‐1‐phenyl ethane or ethyl‐2‐bromoisobutyrate as an initiator and N,N,N′,N″,N″‐pentamethyldiethylenetriamine as ligand at 110 °C. Kinetic experiments were carried out to reveal the effect of PhSNa concentration on copper‐catalyzed LRP of St. This technique was successfully applied for the preparation of both chain‐extended polymer and block copolymer polystyrene‐b‐poly(methyl methacrylate). The obtained polymers were characterized using GPC, ¹H‐NMR, and MALDI‐TOF measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5923–5932, 2006     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Preparation of Propargyl-terminated Polylactide by the Bulk Ring-opening Polymerization

Propargyl-terminated polylactide was prepared by bulk ring-opening polymerization of L-lactide (LLA) at 105°C in the presence of 3-methyl-1-pentyn-3-ol as the initiator and Sn(Oct)₂ as the catalyst. A significant decline of the alkynes chain-end functionality was observed by ¹H NMR even at the early stage of the polymerization. The most probable reason is the intermolecular oxidative coupling of the propargyl end groups. Propargyl-terminated polylactide having higher chain-end functionality (f = 86%) and low polydispersity (PDI = 1.22) was prepared with the addition of N,N,N′,N″,N″-pentamethyldiethylenetriamine, whose huge steric hindrance provides the protective effect of propargyl groups.     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——三层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型具有梯度极性的多羟基多臂星状聚合物刷 .端羟基超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 )与 2 溴 异丁基酰溴反应制得大分子引发剂 (HP Br) ,以Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)为催化体系 ,进行甲基丙烯酸甲酯 (MMA)的ATRP反应 ,得到以甲基丙烯酸甲酯为臂的多臂星状超支化聚合物 (HP g PMMA) .又以HP g PMMA为引发剂 ,进行甲基丙烯酸羟乙酯 (HEMA)的ATRP聚合 ,得到核壳型具有梯度极性的多羟基多臂星状超支化聚合物 (HP g PMMA b PHEMA) ,继续将其羟基官能团溴代化 (与 2 溴 异丁基酰溴反应 ) ,引发HEMA的ATRP溶液聚合 ,得到了多臂星状超支化聚合物刷 .产物的结构用1 H NMR、FTIR、GPC等进行了表征和测试 .     

Chain-growth polymerization of azide–alkyne difunctional monomer: Synthesis of star polymer with linear polytriazole arms from a core

This article reports a chain-growth coupling polymerization of AB difunctional monomer via copper-catalyzed azide–alkyne cycloaddition (CuAAC) reaction for synthesis of star polymers. Unlike our previously reported CuAAC polymerization of AB _n (n ≥ 2) monomers that spontaneously demonstrated a chain-growth mechanism in synthesis of hyperbranched polymer, the homopolymerization of AB monomer showed a common but less desired step-growth mechanism as the triazole groups aligned in a linear chain could not effectively confine the Cu catalyst in the polymer species. In contrast, the use of polytriazole-based core molecules that contained multiple azido groups successfully switched the polymerization of AB monomers into chain-growth mechanism and produced 3-arm star polymers and multi-arm hyperstar polymers with linear increase of polymer molecular weight with conversion and narrow molecular weight distribution, for example, M_w/M_n ~ 1.05. When acid-degradable hyperbranched polymeric core was used, the obtained hyperstar polymers could be easily degraded under acidic environment, producing linear degraded arms with defined polydispersity. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 84–90     

Synthese,Struktur und einige Reaktionen [N-(N′,N′,N″,N″-tetramethyl)-guanidinyl]-substituierter Phosphorylverbindungen

Synthesis, Structure, and some Reactions of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted Phosphoryl Compounds The tetramethylguanidinyl-substituted phosphoryl compounds 1 – 10 were prepared in the reaction of the appropriate chlorophosphoryl compounds with either N′,N′,N″,N″-tetramethylguanidine (HTMG) or N-trimethylsilyl-(N′,N′,N″,N″-tetramethyl)guanidine (TMSTMG). With methyl iodide 1 reacted with N-alkylation to give the ammonium salt 11. 1 reacted with BF₃ · Et₂O at both imino nitrogen atoms with formation of the bis-BF₃-adduct 12 . The X-ray structure determination of phenylphosphonic acid-bis(N′,N′,N″,N″-tetramethylguanidinide) 3 shows shortened PN-bonds and widened PNC-angles, consistent with the partial double bond character of the PN-bond.     

Synthesis of block and star copolymers by photoinduced radical coupling process

The general design for the synthesis of AB diblock, and A₂B and AB₂ star copolymers based on the statistical coupling of poly(styrene) (PSt) and poly (methyl methacrylate) (PMMA) macromolecules containing photoreactive benzophenone is presented. For this purpose, mono- and bifunctional initiators for Atom Transfer Radical Polymerization (ATRP) bearing benzophenone group were synthesized and characterized. End- and mid-chain benzophenone functional PSt and PMMA with low molecular weights were obtained by ATRP using these initiators in the presence of CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalytic complex. Poly(styrene-block-methyl methacrylate) (PSt-b-PMMA) copolymers were prepared by photolysis of the solutions containing end functional PSt and PMMA in THF at λ = 350 nm for 60 min in the presence of a hydrogen donor such as N-methyldiethanolamine (NMDEA). The proposed mechanism assumes hydrogen abstraction of photoexcited benzophenone moiety by NMDEA. Ketyl radicals resulting from abstraction reaction undergo radical-radical coupling to form benzpinacol structure at the core. Formation of A₂B and AB₂ type star copolymers upon irradiation of solutions containing appropriate combinations of end- and mid-chain functional polymers was also demonstrated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2938–2947, 2009     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

Asymmetric chain-growth synthesis of polyisocyanide with chiral nickel precatalysts

Nickel(II)-aryl complexes [(L₂)Ni(Ar)Br] bearing either chiral phosphine ligands (L₂ = RR- or SS-DIPAMP, Ar = ortho-anisyl), or a chiral aryl-group have been prepared, and their structural optical an chiroptical properties have been characterized. Enantiomeric pairs of both catalysts have been used for the asymmetric polymerization of different isocyanides ( M1 , M2 , M3 ), to give well defined polyisocyanides ( P1 , P2 , P3 ). Their polymerization behavior has been studied, which confirmed chain-growth polymerization in all cases. The asymmetric induction has been verified by circular dichroism spectroscopy on enantiomeric pairs of all three polymers.     

Synthesis of well‐defined AB20‐type star polymers with cyclodextrin‐core by combination of NMP and ATRP

The synthesis of an AB₂₀‐type heteroarm star polymer consisting of a polystyrene arm and 20‐arms of poly(methyl methacrylate) or poly(tert‐butyl acrylate) was carried out using the combination of nitroxide‐mediated polymerization (NMP) and atom transfer radical polymerization (ATRP). The NMP of styrene was carried out using mono‐6‐[4‐(1′‐(2″,2″,6″,6″‐tetramethyl‐1″‐piperidinyloxy)‐ethyl)benzamido]‐β‐cyclodextrin peracetate ( 1 ) to afford end‐functionalized polystyrene with an acetylated β‐cyclodextrin (β‐CyD) unit (prepolymer 2 ) with a number‐average molecular weight (M_n) of 11700 and a polydispersity (M_w/M_n) of 1.17. After deacetylation of prepolymer 2 , the resulting polymer was reacted with 2‐bromoisobutyric anhydride to give end‐functionalized polystyrene with 20(2‐bromoisobutyrol)s β‐CyD, macroinitiator 4 . The copper (I)‐mediated ATRP of methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) was carried out using macroinitiator 4 . The resulting polymers were isolated by SEC fractionation to produce AB₂₀‐type star polymers with a β‐CyD‐core, 5 . The well‐defined structure of 5 with weight‐average molecular weight (M_w)s of 13,500–65,300 and M_w/M_n's of 1.26–1.28 was demonstrated by SEC and light scattering measurements. The arm polymers were separated from 5 by destruction with 28 wt % sodium methoxide in order to analyze the details of their characteristic structure. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4271–4279, 2005     

Prediction and Experimental Characterization of the Molecular Architecture of FRP and ATRP Synthesized Polyacrylate Networks

Summary: This work reports experimental and modeling studies concerning the conventional (FRP) and atom transfer radical polymerization (ATRP) of acrylate/diacrylate monomers. In the framework of a recently developed general approach, kinetic models including crosslinking reactions and branching by chain transfer to polymer are discussed for FRP and ATRP polymerization systems. Besides molecular weight distribution (MWD), fairly good predictions of the z-average radius of gyration could be obtained for these non-linear polymers. A set of experiments was performed at 1 L scale in a batch reactor using n-butyl acrylate (BA) or methyl acrylate (MA) as monovinyl monomers and 1,6-Hexanediol diacrylate (HDDA) or bisphenol A ethoxylate diacrylate (BEDA) as crosslinkers. In FRP experiments, AIBN was used as initiator and ATRP polymerizations were initiated by ethyl 2-bromopropionate (EBrP) and mediated by CuBr using PMDETA (N,N,N′,N″,N″-pentamethyldiethylenetriamine) as ligant. Polymerizations were carried out in solution at 60 °C with different dilutions using toluene and DMF as solvents. Products formed at different polymerization times were analyzed by SEC/RI/MALLS yielding average MW, MWD, z-average radius of gyration and monomer conversion. Important differences in the molecular architecture of the synthesized FRP and ATRP highly branched polyacrylates have been identified. Comparisons of experimental results with predictions have put into evidence the important effect of intramolecular cyclizations at all dilutions, even with ATRP polymerizations.