Selective α‐Oxyamination and Hydroxylation of Aliphatic Amides

Compared to the α‐functionalization of aldehydes, ketones, even esters, the direct α‐modification of amides is still a challenge because of the low acidity of α‐CH groups. The α‐functionalization of N−H (primary and secondary) amides, containing both an unactived α‐C−H bond and a competitively active N−H bond, remains elusive. Shown herein is the general and efficient oxidative α‐oxyamination and hydroxylation of aliphatic amides including secondary N−H amides. This transition‐metal‐free chemistry with high chemoselectivity provides an efficient approach to α‐hydroxy amides. This oxidative protocol significantly enables the selective functionalization of inert α‐C−H bonds with the complete preservation of active N−H bond.     

Ligand‐Enabled β‐Methylene C(sp3)−H Arylation of Masked Aliphatic Alcohols

Despite recent advances, reactivity and site‐selectivity remain significant obstacles for the practical application of C(sp³)?H bond functionalization methods. Here, we describe a system that combines a salicylic‐aldehyde‐derived L,X‐type directing group with an electron‐deficient 2‐pyridone ligand to enable the β‐methylene C(sp³)?H arylation of aliphatic alcohols, which has not been possible previously. Notably, this protocol is compatible with heterocycles embedded in both alcohol substrates and aryl coupling partners. A site‐ and stereo‐specific annulation of dihydrocholesterol and the synthesis of a key intermediate of englitazone illustrate the practicality of this method.     

Palladium‐Catalyzed γ‐C(sp3)−H Arylation of Thiols by a Detachable Protecting/Directing Group

Reported herein is a palladium‐catalyzed, directed γ‐C(sp³)?H arylation of protected thiols. The key is to utilize Michael acceptors as a dual reagent to install a protecting/directing group on thiols by a thiol‐Michael click reaction, and remove it later under basic conditions. The C?H arylation proceeds with high functional‐group tolerance and the deprotected thiols can be further transformed into other sulfur‐containing compounds. This unique mode of activation could open the door for site‐selective functionalization of thiols or other sulfur‐containing compounds at unactivated positions.     

Thioamide‐Directed Cobalt(III)‐Catalyzed Selective Amidation of C(sp3)−H Bonds

A mild, oxidant‐free, and selective Cp*Co^III‐catalyzed amidation of thioamides with robust dioxazolone amidating agents via C(sp³)−H bond activation to generate the desired amidated products is reported. The method is efficient and allows for the C−H amidation of a wide range of functionalized thioamides with aryl‐, heteroaryl‐, and alkyl‐substituted dioxazolones under the Cp*Co^III‐catalyzed conditions. The observed regioselectivity towards primary C(sp³)−H activation is supported by computational studies and the cyclometalation is proposed to proceed by means of an external carboxylate‐assisted concerted metalation/deprotonation mechanism. The reported method is a rare example of the use of a directing group other than the commonly used pyridine and quinolone classes for Cp*Co^III‐catalyzed C(sp³)−H functionalization and the first to exploit thioamides.     

Transient Directing Groups in Metal−Organic Cooperative Catalysis

The direct functionalization of C−H bonds is among the most fundamental chemical transformations in organic synthesis. However, when the innate reactivity of the substrate cannot be utilized for the functionalization of a given single C−H bond, this selective C−H bond functionalization mostly relies on the use of directing groups that allow bringing the catalyst in close proximity to the C−H bond to be activated and these directing groups need to be installed before and cleaved after the transformation, which involves two additional undesired synthetic operations. These additional steps dramatically reduce the overall impact and the attractiveness of C−H bond functionalization techniques since classical approaches based on substrate pre-functionalization are sometimes still more straightforward and appealing. During the past decade, a different approach involving both the in situ installation and removal of the directing group, which can then often be used in a catalytic manner, has emerged: the transient directing group strategy. In addition to its innovative character, this strategy has brought C−H bond functionalization to an unprecedented level of usefulness and has enabled the development of remarkably efficient processes for the direct and selective introduction of functional groups onto both aromatic and aliphatic substrates. The processes unlocked by the development of these transient directing groups will be comprehensively overviewed in this review article.     

Site‐Selective δ‐C(sp3)−H Alkylation of Amino Acids and Peptides with Maleimides via a Six‐Membered Palladacycle

The site‐selective functionalization of unactivated C(sp³)?H bonds remains one of the greatest challenges in organic synthesis. Herein, we report on the site‐selective δ‐C(sp³)?H alkylation of amino acids and peptides with maleimides via a kinetically less favored six‐membered palladacycle in the presence of more accessible γ‐C(sp³)?H bonds. Experimental studies revealed that C?H bond cleavage occurs reversibly and preferentially at γ‐methyl over δ‐methyl C?H bonds while the subsequent alkylation proceeds exclusively at the six‐membered palladacycle that is generated by δ‐C?H activation. The selectivity can be explained by the Curtin–Hammett principle. The exceptional compatibility of this alkylation with various oligopeptides renders this procedure valuable for late‐stage peptide modifications. Notably, this process is also the first palladium(II)‐catalyzed Michael‐type alkylation reaction that proceeds through C(sp³)?H activation.     

α‐Aminoxy‐Acid‐Auxiliary‐Enabled Intermolecular Radical γ‐C(sp3)−H Functionalization of Ketones

A method for site‐specific intermolecular γ‐C(sp³)?H functionalization of ketones has been developed using an α‐aminoxy acid auxiliary applying photoredox catalysis. Regioselective activation of an inert C?H bond is achieved by 1,5‐hydrogen atom abstraction by an oxidatively generated iminyl radical. Tertiary and secondary C‐radicals thus formed at the γ‐position of the imine functionality undergo radical conjugate addition to various Michael acceptors to provide, after reduction and imine hydrolysis, the corresponding γ‐functionalized ketones.     

Ligand‐Controlled Direct γ‐C−H Arylation of Aldehydes

The first example of Pd^II‐catalyzed γ‐C(sp³)?H functionalization of aliphatic and benzoheteroaryl aldehydes has been developed using a transient ligand and an external ligand, concurrently. A wide array of γ‐arylated aldehydes were readily accessed without preinstalling internal directing groups. The catalytic mechanism was studied by performing deuterium‐labelling experiments, which indicated that the γ‐C(sp³)?H bond cleavage is the rate‐limiting step during the reaction process. This reaction could be performed on a gram scale, and also demonstrated its potential application in the synthesis of new mechanofluorochromic materials with blue‐shifted mechanochromic properties.     

A Hydrazone‐Based exo‐Directing‐Group Strategy for β C−H Oxidation of Aliphatic Amines

Described is a new hydrazone‐based exo‐directing group (DG) strategy developed for the functionalization of unactivated primary β C?H bonds of aliphatic amines. Conveniently synthesized from protected primary amines, the hydrazone DGs are shown to site‐selectively promote the β‐acetoxylation and tosyloxylation via five‐membered exo‐palladacycles. Amines with a wide scope of skeletons and functional groups are tolerated. Moreover, the hydrazone DG can be readily removed, and a one‐pot C?H acetoxylation/DG removal protocol was also discovered.     

Site‐Selective Approach to β‐Fluorination: Photocatalyzed Ring Opening of Cyclopropanols

To expand upon the recent pioneering reports of catalyzed sp³ C?H fluorination methods, the next rational step is to focus on directing “radical‐based fluorination” more effectively. One potential solution entails selective C?C bond activation as a prelude to selective fluorination. Herein, we report the tandem photocatalyzed ring‐opening/fluorination reactions of cyclopropanols by 1,2,4,5‐tetracyanobenzene (TCB) and Selectfluor to afford a process tantamount to site‐selective β‐fluorination of carbonyl‐containing compounds. This new approach provides a synthetically mild and operationally simple route to otherwise difficult‐to‐prepare β‐fluorinated products in good yields and with good‐to‐excellent regioselectivity. Remarkably, substrates that contain other usually reactive (e.g., benzylic) sites undergo ring‐opening fluorination preferably. The versatility of this method to give cyclic β‐fluorides from tertiary cyclopropanols and γ‐fluoro alcohols is also highlighted.     

Iron(II)‐Catalyzed Site‐Selective Functionalization of Unactivated C(sp3)−H Bonds Guided by Alkoxyl Radicals

An alkoxyl radical guided strategy for site‐selective functionalization of unactivated methylene and methine C?H bonds enabled by an Fe^II‐catalyzed redox process is described. The mild, expeditious, and modular protocol allows efficient remote aliphatic fluorination, chlorination, amination, and alkynylation of structurally and electronically varied primary, secondary, and tertiary hydroperoxides with excellent functional‐group tolerance. The application for one‐pot 1,4‐hydroxyl functionalization of non‐oxygenated alkane substrates initiated by aerobic C?H oxygenation is also demonstrated.     

Cross‐Coupling of α‐Carbonyl Sulfoxonium Ylides with C−H Bonds

The functionalization of carbon–hydrogen bonds in non‐nucleophilic substrates using α‐carbonyl sulfoxonium ylides has not been so far investigated, despite the potential safety advantages that such reagents would provide over either diazo compounds or their in situ precursors. Described herein are the cross‐coupling reactions of sulfoxonium ylides with C(sp²)−H bonds of arenes and heteroarenes in the presence of a rhodium catalyst. The reaction proceeds by a succession of C−H activation, migratory insertion of the ylide into the carbon–metal bond, and protodemetalation, the last step being turnover‐limiting. The method is applied to the synthesis of benz[c]acridines when allied to an iridium‐catalyzed dehydrative cyclization.     

Selective Hydrogen Atom Abstraction through Induced Bond Polarization: Direct α‐Arylation of Alcohols through Photoredox,HAT, and Nickel Catalysis

The combination of nickel metallaphotoredox catalysis, hydrogen atom transfer catalysis, and a Lewis acid activation mode, has led to the development of an arylation method for the selective functionalization of alcohol α‐hydroxy C−H bonds. This approach employs zinc‐mediated alcohol deprotonation to activate α‐hydroxy C−H bonds while simultaneously suppressing C−O bond formation by inhibiting the formation of nickel alkoxide species. The use of Zn‐based Lewis acids also deactivates other hydridic bonds such as α‐amino and α‐oxy C−H bonds. This approach facilitates rapid access to benzylic alcohols, an important motif in drug discovery. A 3‐step synthesis of the drug Prozac exemplifies the utility of this new method.     

Manganese(I)‐Catalyzed C−H Activation: The Key Role of a 7‐Membered Manganacycle in H‐Transfer and Reductive Elimination

Manganese‐catalyzed C?H bond activation chemistry is emerging as a powerful and complementary method for molecular functionalization. A highly reactive seven‐membered Mn^I intermediate is detected and characterized that is effective for H‐transfer or reductive elimination to deliver alkenylated or pyridinium products, respectively. The two pathways are determined at Mn^I by judicious choice of an electron‐deficient 2‐pyrone substrate containing a 2‐pyridyl directing group, which undergoes regioselective C?H bond activation, serving as a valuable system for probing the mechanistic features of Mn C?H bond activation chemistry.     

Late‐Stage Peptide Macrocyclization by Palladium‐Catalyzed Site‐Selective C−H Olefination of Tryptophan

Transition‐metal‐catalyzed C?H activation has shown potential in the functionalization of peptides with expanded structural diversity. Herein, the development of late‐stage peptide macrocyclization methods by palladium‐catalyzed site‐selective C(sp²)?H olefination of tryptophan residues at the C2 and C4 positions is reported. This strategy utilizes the peptide backbone as endogenous directing groups and provides access to peptide macrocycles with unique Trp–alkene crosslinks.     

2,4‐Dinitrophenol‐Catalyzed α‐C(sp3)−H and C(sp)−H Bond Functionalization of Cyclic Amines and Alkynes: Highly Regio‐/Diastereoselective Synthesis of α‐Alkynyl‐3‐Amino‐2‐Oxindoles

A transition‐metal‐ and oxidant‐free DNP (2,4‐dinitrophenol)‐catalyzed atom‐economical regio‐ and diastereoselective synthesis of monofunctionalized α‐alkynyl‐3‐amino‐2‐oxindole derivatives by C?H bond functionalization of cyclic amines and alkynes with indoline‐2,3‐diones has been developed. This cascade event sequentially involves the reductive amination of indoline‐2,3‐dione by imine formation and cross coupling between C(sp³)?H and C(sp)?H of the cyclic amines and alkynes. This reaction offers an efficient and attractive pathway to different types of α‐alkynyl‐3‐amino‐2‐oxindole derivatives in good yields with a wide tolerance of functional groups. The salient feature of this methodology is that it completely suppresses the homocoupling of alkynes. To the best of our knowledge, this is the first example of a DNP‐catalyzed metal‐free direct C(sp³)?H and C(sp)?H bond functionalization providing biologically active α‐alkynyl‐3‐amino‐2‐oxindole scaffolds.     

Chiral Cp‐Rhodium(III)‐Catalyzed Asymmetric Hydroarylations of 1,1‐Disubstituted Alkenes

Metal‐catalyzed functionalizations at the ortho position of a directing group have become an efficient bond‐forming strategy. A wide range of transformations that employ Cp*Rh^III catalysts have been described, but despite their synthetic potential, enantioselective variants that use chiral versions of the Cp* ligand remain scarce (Cp*=pentamethyl cyclopentadienyl). Cyclopentadienyl compounds with an atropchiral biaryl backbone are shown to be suitable ligands for the efficient intramolecular enantioselective hydroarylation of aryl hydroxamates. Dihydrofurans that bear methyl‐substituted quaternary stereocenters are thus obtained by C? H functionalization under mild conditions.     

Copper‐Mediated Late‐Stage Functionalization of Heterocycle‐Containing Molecules

One long‐standing issue in directed C−H functionalization is that either nitrogen or sulfur atoms present in heterocyclic substrates may bind preferentially to a transition‐metal catalyst rather than to the desired directing group. This competitive binding has largely hindered the application of C−H functionalization in late‐stage heterocycle drug discovery. Reported here is the use of an oxazoline‐based directing group capable of overriding the poisoning effect of a wide range of heterocycle substrates. The potential use of this directing group in pharmaceutical drug discovery is illustrated by diversification of Telmisartan (an antagonist for the angiotensin II receptor) through copper‐mediated C−H amination, hydroxylation, thiolation, arylation, and trifluoromethylation.     

C7‐Indole Amidations and Alkenylations by Ruthenium(II) Catalysis

C7?H‐functionalized indoles are ubiquitous structural units of biological and pharmaceutical compounds for numerous antiviral agents against SARS‐CoV or HIV‐1. Thus, achieving site‐selective functionalizations of the C7?H position of indoles, while discriminating among other bonds, is in high demand. Herein, we disclose site‐selective C7?H activations of indoles by ruthenium(II) biscarboxylate catalysis under mild conditions. Base‐assisted internal electrophilic‐type substitution C?H ruthenation by weak O‐coordination enabled the C7?H functionalization of indoles and offered a broad scope, including C?N and C?C bond formation. The versatile ruthenium‐catalyzed C7?H activations were characterized by gram‐scale syntheses and the traceless removal of the directing group, thus providing easy access to pharmaceutically relevant scaffolds. Detailed mechanistic studies through spectroscopic and spectrometric analyses shed light on the unique nature of the robust ruthenium catalysis for the functionalization of the C7?H position of indoles.     

Synthesis of Substituted 2‐Amino‐1,3‐oxazoles via Copper‐Catalyzed Oxidative Cyclization of Enamines and N,N‐Dialkyl Formamides

A facile synthesis of 2‐amino‐1,3‐oxazoles via Cu^I‐catalyzed oxidative cyclization of enamines and N ,N ‐dialkyl formamides has been developed. The reaction proceeds through an oxidative C−N bond formation, followed by an intramolecular C(sp²)−H bond functionalization/C−O cyclization in one pot. This protocol provides direct access to useful 2‐amino‐1,3‐oxazoles and features protecting‐group‐free nitrogen sources, readily available starting materials, a broad substrate scope and mild reaction conditions.