Counter-current extraction and separation of U(VI) from a mixture of U(VI)–Th(IV)–Y(III) using tris-2-ethyl hexyl phosphate (TEHP)

Evaluation of tris-2-ethyl hexyl phosphate (TEHP) for counter-current extraction and separation of U(VI) from a mixture of U(VI)–Th(IV)–Y(III) from nitric acid medium was carried out under wide experimental conditions. Batch extraction studies were carried out to investigate the effect of nitric acid concentration in feed solution, U(VI)/Th(IV) ratio and extractant concentration and the results were compared with established solvent such as tri-n-butyl phosphate (TBP) for separation of U(VI) from nitric acid medium. McCabe–Thiele diagrams for extraction as well as stripping of U(VI) were constructed under simulated conditions. Based on batch experiments, six stage counter-current extraction studies were conducted under various TEHP concentration and it was observed that 0.1 M TEHP/n-paraffin was most suitable for selective recovery of U(VI) from a mixture of U(VI)–Th(IV). An optimized condition, 0.1 M TEHP/n-paraffin, 2 M HNO₃ in feed and six number of stages was evaluated for selective extraction and stripping of U(VI) from a solution containing mixture of U(VI)–Th(IV)–Y(III) in nitric acid medium. The U(VI) in strip solution was precipitated using 30 % H₂O₂ at pH ~3. Average particle size of the final precipitate was found to be ~33 μm.     

Synthesis and characterization of N,N,N′,N′-tetraalkyl-4-oxaheptanediamide as extractant for extraction of uranium(VI) and thorium(IV) ions from nitric acid solution

Tridentate ligand N,N,N′,N′-tetraoctyl-4-oxaheptanediamide(TOOHA) and other three analogous diamides have been prepared and characterized by using NMR spectra and element analysis. The extraction of UO₂ ²⁺ and Th⁴⁺ with the present extractants was investigated at 293 ± 1 K from nitric acid solutions. n-Octane was found to be the most suitable diluent in the present study compared with other diluents tested. Extraction distribution ratios (D) of U(VI) and Th(IV) have been studied as a function of aqueous concentrations of HNO₃, extractant concentrations. The results indicated that U(VI) is mainly extracted as UO₂(NO₃)₂·2TOOHA. In the case of Th⁴⁺ ion, the possible compositions of extracted species in organic phase were presumed to be Th(NO₃)₄·2TOOHA and Th(NO₃)₄·3TOOHA. In addition, the influence of concentration of sodium nitrate as salting-out agent on the distribution ratio of U(VI) and Th(IV) with TOOHA was also evaluated.     

Solvent extraction of uranium(VI) and thorium(IV) by N,N′-di-p-tolylpyridine-2,6-dicarboxamide from nitric acid solution

Synthesis and characterization of N,N′-di-p-tolylpyridine-2,6-dicarboxamide (DTPDA) was carried out and used for extraction of U(VI) and Th(IV) from nitric acid solutions. The processes of extraction were determined by the slope analysis and by analyzing a function that allows the simultaneous treatment of all the experimental points obtained in different conditions. The different factors affecting the extraction distribution ratio(D) of U(VI) and Th(IV) (extraction concentration, concentrations of nitric acid, salting-out agent NaNO₃ concentration, equilibration time and temperature) were investigated. The results obtained indicated that the extraction species of U(VI) and Th(IV) are mainly extracted as UO₂(NO₃)₂·1.5DTPDA and Th(NO₃)₄·1.5DTPDA. The related thermodynamic functions were calculated. Back-extraction of U(VI) and Th(IV) from organic phases was also studied.     

Extraction kinetics of Uranium(VI) and Thorium(IV) with Tri-iso-amyl phosphate from nitric acid using a Lewis Cell

The extraction kinetics of uranium(VI) and thorium(IV) with Tri-iso-amyl phosphate (TiAP) from nitric acid medium has been investigated using a Lewis Cell. Especially, dependences of the extraction rate on stirring speed, temperature, interfacial area were firstly measured to elucidate the extraction kinetics regimes. The experimental results demonstrated that extraction kinetic of U(VI) is governed by chemical reactions at interface with an activation energy, E_a, of 43.41 kJ/mol, while the rate of Th(IV) extraction is proved to be intermediate controlled, of which the E_a is 23.20 kJ/mol. Reaction orders with respect to the influencing parameters of the extraction rate are determined, and the rate equations of U(VI) and Th(IV) at 293 K have been proposed as $$ {\text{r}} = - {\text{dcUO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} /{\text{dt}} = 1. 80 \times 10^{ - 3} \left[ {{\text{UO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} } \right]^{ 1.0 1} \left[ {\text{TiAP}} \right]^{0. 5 5} , $$ $$ {\text{r}} = - {\text{dcTh }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} /{\text{dt}} = 1. 8 8\times 10^{ - 3} \left[ {{\text{Th }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} } \right]^{ 1.0 4} \left[ {\text{TiAP}} \right]^{ 1. 7 7} \left[ {{\text{HNO}}_{ 3} } \right]^{0. 3 8} , $$ respectively.     

Synergistic extraction of U(VI) and Th(IV) from nitric acid with 4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-thione (HBMPPT) and tri-n-octylphosphine oxide (TOPO) in toluene

The extractant HBMPPT (4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-thione) was synthesized from HBMPP. Its m.p. was 106–108°C. The synergistic extraction of U(VI) and Th(IV) from nitric acid solution by HBMPPT and TOPO in toluene was studied. The extraction ability of HBMPPT was not so high as that of its parent (HBMPP), but when a little tri-n-octylphosphine oxide (TOPO) was added the ability to extract U(VI) and Th(IV) was seriously improved. The synergistic extracted complexes may be presented as UO₂NO₃·BMPPT·TOPO and UO₂(BMPPT)₂·TOPO for U(VI), and Th(NO₃)₃·BMPPT·TOPO and Th(NO₃)₂(BMPPT)₂·TOPO for Th(IV) respectively.     

Extraction of uranium(VI) and thorium(IV) from nitric acid solution by N-alkylcaprolactam

Extraction of uranium(VI), thorium(IV) from nitric acid has been studied with N-octylcaprolactam and N-(2-ethyl)hexylcaprolactam. Distribution coefficients of U(VI), Th(IV) and HNO₃ as a function of aqueous NHO₃ concentration, extractant concentration and temperature have been studied. The compositions of extracted species, thermodynamic parameters of extraction have been evaluated. Third phase formation in extraction of U(VI) has been studied. Back extraction behavior of U(VI) and Th(IV) from the organic phase has also been tested. The results obtained are compared with those obtained by using TBP under the same experimental conditions.     

LIX 84 as an extractant for throium(IV), uranium(VI) and molybdenum(VI)

The extraction order of Th(IV), U(VI) and Mo(VI) based on pH_0.5 values is Mo(VI)>U(VI)>Th(IV). Quantitative extraction has been observed for U(VI) by mixture of 10% (v/v) LIX 84 and 0.1M dibenzoylmethane at pH 4.2 and by mixture of 10% LIX 84 and 0.05M HTTA in the pH range 5.5–7.3 and for Mo(VI) by 10% LIX 84 from chloride media at pH 1.5. The order of extraction of Mo(VI) from 1N acid solutions is HCl>H₂SO₄>HNO₃>HClO₄ and extraction decreases very rapidly with increase in the concentration of HCl as compared to that from H₂SO₄, HNO₃ and HClO₄ acid solutions. The diluents C₆H₆, CCl₄ and CHCl₂ are found to be superior ton-butyl alcohol and isoamyl alcohol for extraction of Mo(VI). Influence of concentration of different anions on the extraction of U(VI) and Mo(VI) has been studied. Very little extraction has been observed in case of Th(IV) by LIX 84 or its mixtures with other chelating extractants or neutral donors.     

Adsorptive removal of U(VI) and Th(IV) from aqueous solutions using polymer-based electrospun PEO/PLLA fibrous membranes

Fibrous membranes based on poly(ethylene oxide) and poly(l-lactide) fabricated by electrospinning were evaluated for the first time as substrates for the adsorption of tetravalent thorium (Th(IV)) and hexavalent uranium (U(VI)) from aqueous media. The membranes consisted of microfibers with diameters of approximately 2 μm as revealed by scanning electron microscopy. The adsorption of Th(IV) and U(VI) on the membrane was investigated as a function of pH, ionic strength and initial metal concentration under normal atmospheric conditions. The experimental data indicated increased affinity of the membrane for Th(IV) and U(VI), which was pH depended and reaches maximum values (>90 %) for Th(IV) and U(VI) at pH 3 and pH 6.5, respectively. The maximum adsorption capacity (q _max) at optimum conditions was evaluated from the Langmuir isotherm and was found to amount 50.08 and 9.3 mmol kg^?1 for Th(IV) and U(VI), respectively. In addition, studies on the effect of ionic strength on the adsorption efficiency did not show any significant effect indicating that the adsorption of Th(IV) and U(VI) on the membrane was most probably based on specific interactions and the formation of inner-sphere surface complexes. The significantly higher adsorption efficiency of the membrane for Th(IV) in acidic media (pH ≤ 3) could be utilized for a pH-triggered, selective separation of Th(IV) from U(VI) from aqueous media.     

Synergistic effect of HBMPPT with PSO, DOSO and TBP on the extraction of U(VI) and on the separation of U(VI) and Th(IV)

Some popular neutral extractants (PSO-petroleum sulfoxide, DOSO-di-n-octyl sulfoxide, TBP-tributylphosphate etc.) were chosen as synergist to study the synergistic effect on the extraction reaction with HBMPPT (4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-thione) for U(VI), and the synergistic separation ability of HBMPPT for U(VI) and Th(IV). The synergistic extraction ability shown by the studied systems for U(VI) is as follows: PSO>DOSO>TBP, and the same sequence was also verified for the separation coefficient of U(VI) and Th(IV). The synergistic complexes may be presented as: UO₂NO₃·BMPPT·S and UO₂(BMPPT)₂·S for U(VI) (S is PSO, DOSO or TBP).     

Solvent Extraction Separation of Th(IV) and U(VI) with PC-88A

Liquid-liquid extraction of Th(IV) and U(VI) has been investigated by commercial extractant PC-88A in toluene. The optimum conditions for extraction of these metals have been established by studying the various parameters like acid concentration/pH, reagent concentration, diluents and shaking time. The extraction of Th(IV) was found to be quantitative with 0.1–1.0M HNO₃ acid and in the pH range 1.0–4.0 while U(VI) was completely extracted in the pH range 1.0–3.5 with 2.5·10^–2M and 2.·10^–2M PC-88A in toluene, respectively. The probable extracted species have been ascertained by log D-log C plot as ThR₄·4HR and UO₂R₂·2HR, respectively. The method permits separation of Th(IV) and U(VI) from associated metals with a recovery of 99.0%.     

Extraction and separation of Th(IV) and U(VI) from nitric acid media using PIA-8 and HDEHP

Extraction behavior of Th(IV) and U(VI) has been investigated with bis(2-ethylhexyl) phosphinic acid (PIA-8) and bis(2-ethylhexyl) phosphoric acid (HDEHP) from nitric acid media in toluene. The optimum conditions for extraction of these metals have been established by studying various parameters like acid concentration, pH, reagent concentration, diluents and shaking time. The extraction of Th(IV) was found to be quantitative with 0.3-2.5M HNO₃ by 2.5^.10^-2M HDEHP and in the pH range 0.1-2.5 with 2.3^.10^-2M PIA-8 in toluene. U(VI) was completely extracted in the acidic range of 0.1-2.0M HNO₃ with 2.2^.10^-2M HDEHP and in the pH range of 1.0-3.0 with 2.0^.10^-2M PIA-8 in toluene. The probable extracted species have been ascertained by log D-log c plot as UO₂ R₂ ^.2HR with both the reagents and Th (NO₃)₂R₂ ^.2HR with PIA-8 and Th (NO₃)₃R^.3HR with HDEHP, respectively. Temperature dependence of the extraction equilibrium is examined by the temperature variation method. Separation of U(VI) and Th(IV) was also carried out from commonly associated metals.     

Extraction of U(VI) and Th(IV) from nitric acid medium using tri(butoxyethyl) phosphate (TBEP) in <Emphasis Type="Italic">n</Emphasis>-paraffin

Extraction behavior of U(VI) and Th(IV) from nitric acid medium is investigated using organo-phosphorous extractant, tri(butoxyethyl) phosphate in n-paraffin at room temperature (27 ± 1 °C). The effect of diluents, nitric acid concentration as well as extractant concentration on extraction of U(VI) and Th(IV) are evaluated. Extraction of U(VI) and Th(IV) from nitric acid medium proceeds via solvation mechanism. Slope analysis technique showed the formation of neutral complexes of the type of UO₂(NO₃)₂·2TBEP and Th(NO₃)₄·3TBEP with U(VI) and Th(IV) respectively in the organic phase. The FTIR data showed shifting of P=O stretching frequency from 1,282 to 1,217 cm⁻¹ indicating the strong complexation of P=O group with UO₂ ²⁺ ions in the organic phase. Effect of stripping agents, other metal ions and their separation with respect to U(VI) extraction has also been investigated.     

Selective extraction of U(VI) over Th(IV) from acidic streams using di-bis(2-ethylhexyl) malonamide anchored chloromethylated polymeric matrix

A new chelating polymeric sorbent has been developed using Merrifield chloromethylated resin anchored with di-bis (2-ethylhexyl) malonamide (DB2EHM). The modified resin was characterized by CPMAS NMR spectroscopy, FT-NIR-FIR spectroscopy, CHN elemental analysis and also by thermo gravimetric analysis. The fabricated sorbent showed superior binding affinity for U(VI) over Th(IV) and other diverse ions, even under high acidities. Various physio-chemical parameters, like solution acidity, phase exchange kinetics, metal sorption capacity, electrolyte tolerance studies, etc., influencing the resin’s metal extractive behavior were studied by both static and dynamic method. Batch extraction studies performed over a wide range of solution acidity (0.01-10 M) revealed that selective extraction of U(VI) could be achieved even up to 4 M acidity with distribution ratios (D) in the order of ∼10³. The phase exchange kinetics studies performed for U(VI) and Th(IV) revealed that time duration of <15 min was sufficient for >99.5% extraction. But similar studies when preformed for trivalent lanthanides gave very low D values (<50), with the extraction time extending up to 60 min. The metal sorption studies performed for U(VI) and Th(IV) at 5 M HNO₃ was found to be 62.5 and 38.2 mg g⁻¹,respectively. Extraction efficiency in the presence of inferring electrolyte species and inorganic cations were also examined. Metal ion desorption was effective using 10-15 mL of 1 M (NH₄)₂CO₃ or 0.5 M α-hydroxy isobutyric acid (HIBA). Extraction studies performed on a chromatographic column at 5 M acidity were found to give enrichment factor values of 310 and 250 for U(VI) and Th(IV), respectively. The practical utility of the fabricated chelating sorbent and its efficiency to extract actinides from acidic waste streams was tested using a synthetic nuclear spent fuel solution. The R.S.D. values obtained on triplicate measurements (n = 3) were within 5.2%.     

New extractants for reprocessing of spent Th-U fuel

A study on solvent extraction of U(VI), Th(IV) and HNO₃ from nitric acid media by DEHSO is described. Extraction coefficients of U(VI), Th(IV) and HNO₃ as a function of aqueous HNO₃ concentration, extractant concentration and temperature have been studied. From the data the compositions of extracted species, equilibrium constants and enthalpies of extraction reaction have been evaluated. Back-extraction of U(VI) and Th(IV) from the organic phase by dilute nitric acid has also been tested. All studies on DEHSO are compared with TBP.     

New cyclen derivative ligand for thorium(IV) separation by solvent extraction

A new N-containing ligand, 1,4,7,10-tetra-(4-nitrobenzyl)-1,4,7,10-tetraazacyclo-dodecane (L), was synthesized, and its structure was determined by ¹H NMR, high resolution mass spectrometry and X-ray diffraction. L crystallized in the monoclinic system (P2₁/n space group; a = 7.7895(2) Å, b = 22.9592(5) Å, c = 9.9204(2) Å; α = 90.00°, β = 105.481(3)°, γ = 90.00°; Z = 2). Slope analysis and the continuous variation method demonstrated that 1:2 complexes between Th(IV) and L are formed; furthermore, the XPS analysis suggested that two oxygen atoms might be provided by two water molecules and that eight nitrogen atoms might be provided by two L molecules to form a ten-coordinate compound with Th(IV). The extraction equilibrium constant for the complex formation between Th(IV) and L was logK _ex = 6.95 ± 0.15 (25 °C), and the Gibbs free energy, ΔG ^o (25 °C), of the 1:2 Th–L complex in dichloromethane was ?39.56 kJ/mol. The L ligand in dichloromethane only slightly extracted Th(IV) from HNO₃ solution at pH = 1–3; however, an extraction efficiency of E = 94.9 ± 0.3 % was observed at pH = 4.63. The selectivity of L for the Th(IV) cation over other cations (i.e., Cs(I), Sr(II), Y(III), La(III), Sm(III), Eu(III), U(VI), and ²⁴¹Am(III)) was evaluated. Furthermore, the stripping experiments showed that the stripping agent (0.5 mol/L Na₂CO₃ + 0.1 mol/L EDTA) could provide an optimal condition for stripping thorium, and thorium recovery was up to 91.6 ± 0.1 %.     

The solvent extraction of UO 2 2+ and Th4+ with petroleum sulfoxide

The influence of the concentration of nitric, hydrochloric and phosphoric acids, petroleum sulfoxides (PSO), salting-out agent, kind of diluent and temperature on the distribution ratio of U(VI) and Th(IV) has been systematically studied. It is found that the extraction regularity of PSO is similar to that of TBP. The distribution ratio in phosphoric acid is lower, but it increases with the increase of hydrochloric acid concentration and reaches a high value. The U(VI) exhibits the maximum distribution ratio at 3–4 mol/l HNO₃. The distribution ratio of U(VI) and Th(IV) increases rapidly in the presence of a salting out agent. The extracted compounds are determined to be UO₂(NO₃)₂2PSO and Th(NO₃)₄2PSO. The extraction enthalpies of U(VI) and Th(IV) with PSO were also calculated.     

Preconcentration and determination of ultra-trace amounts of U(VI) and Th(IV) using titan yellow-impregnated Amberlite XAD-7 resin

A simple and sensitive method for the determination of ultra trace amounts of U(VI) and Th(IV) ions by spectrophotometric method after solid-phase extraction on a new extractant-impregnated resin (EIR) has been reported. The new EIR was synthesised by impregnating a weakly polar polymeric adsorbent, Amberlite XAD-7, with titan yellow (TY) as extractant. The analytical method is based on the simultaneous adsorption of analyte ions in a mini-column packed with TY/XAD-7 and performing sequential elution with 0.5% (w/v) Na₂CO₃ for uranium and 2.0 M HCl for thorium. The influences of the analytical parameters including pH, salting out agent and sample volume were investigated. The interference effects of foreign ions on the retention of the analyte ions were also explored. The limits of detection for U(VI) and Th(IV) were as low as 50 and 25 ng L^?1, respectively. Relative standard deviations (n = 7) for U(VI) and Th(IV) were 3.1% and 2.9%, respectively. The method was successfully applied to the determination of ultra trace amounts of U(VI) and Th(IV) in different real matrices including industrial wastewater samples and environmental waters. The proposed method was validated using three certified reference materials and the results were in good agreement with the certified values.     

Uranium(VI) and Thorium(IV) Adsorption Studies on Chelating Resin Containing Pentaethylenehexamine as a Functional Group

A new chelating resin (glycidyl methacrylate/divinylbenzene/pentaethylenehexamine (GMA/DVB/PEHA)) for uranium(VI) and thorium(IV) has been developed by functionalizing GMA/DVB with PEHA. The adsorption of U(VI) and Th(IV) ions onto the functionalized GMA/DVB/PEHA were investigated as a function of pH value, contact time, and temperature using batch adsorption technique. The results showed that U(VI) and Th(IV) adsorption onto GMA/DVB/PEHA was strongly dependent on pH. Kinetic studies revealed that the adsorption process achieved equilibrium within 15 and 90 minutes for Th(IV) and U(VI), respectively, and followed a pseudo-second-order rate equation. The isothermal data correlated with the Langmuir model better than the Freundlich model. Thermodynamic data indicated the spontaneous and endothermic nature of the process. The maximum adsorption capacity of U(VI) and Th(IV) were found to be 114 and 78 mg/g, respectively. Quantitative recovery of uranium and thorium were achieved by desorbing the loaded GMA/DVB/PEHA with 0.5 M HNO₃      

Extraction of U(VI) by cyanex-272

Extraction of U(VI) from HNO₃, HCl and HClO₄ media using cyanex-272 (bis[2,4,4 trimethyl pentyl] phosphinic acid)/n-dodecane has been carried out. In the case of HNO₃ and HClO₄ media, the distribution ratio (D) value first decreases and then increases, whereas from HCl medium it first decreases and then remains constant with increase in H⁺ ion concentration. At lower acidities, U(VI) was extracted as UO₂(HA₂)₂ by an ion exchange mechanism, whereas at higher acidities as UO₂(NO₃)₂ ^.2(H₂A₂) following a solvation mechanism. The D for U(VI) by cyanex-272, PC-88A and DEHPA at low acidities follows the order cyanex-272 > PC-88A > DEHPA. Also, cyanex-272 was found to extract U(VI) more efficiently than TBP at 2M HNO₃. The effect of diluents on the extraction of U(VI) by cyanex-272 followed the order cyclohexane > n-dodecane > CCl₄ > benzene. The loading of U(VI) into cyanex-272/n-dodecane from 2M HNO₃ has shown that at saturation point, cyanex-272 was 78% loaded. No third phase was observed at the saturation level. The stripping of U(VI) from the loaded organic phase was not possible with water, it was poor with acetic acid and sodium acetate but quantitative with oxalic acid, ammonium carbonate and sodium carbonate.     

Microwave-assisted dissolution of ceramic uranium dioxide in TBP–HNO3 complex

Microwave-assisted dissolution of ceramic uranium dioxide in tri-n-butyl phosphate (TBP)–HNO₃ complex was investigated. The research on dissolution of ceramic uranium dioxide in TBP–HNO₃ inclusion complex under microwave heating showed the efficiency of the use of this method. Nitric acid present in the inclusion complex participates both dissolution of UO₂, and oxidation of U(IV)–U(VI), the resulting UO₂(NO₃)₂ extracted with tri-n-butyl phosphate. Dissolution rate depends on both temperature of microwave dissolution process, and concentration of nitric acid present in the inclusion complex. The most intensive dissolution process is when the concentration of nitric acid ≥2 mol/L and the temperature of 120 °C. From the experimental data obtained by two kinetic models activation energies were calculated. At the average activation energy of UO₂ dissolution in TBP–HNO₃ complex equal 70 kJ/mol, and reaction order is close to one, i.e. the reaction takes place in an area close to kinetic.