Regio - and stereospecific halogenation of 7alogenoalkenes in liquid hydrogen fluoride

The products of bromo and chlorofluorination of E and Z-1,2-dichloroethylenes, 1, 3-dichloro-1-propenes, 1, 1-dichloro- ethylene and 1, 3-dichloro-2-fluoro-1-propene by N-bromosuccinimide and hexachloromelamine in anhydrous hydrogen fluoride have been studied. It was found that the reaction was in all cases 100% regio and 93–100% trans-stereospecific with the exception of E-1, 2-dichloro-ethylene, its trans-stereospecificity being 85%.Threo and erithro-1-bromo-1, 2-dichloro-2-fluoroethanes, 2-bromo-1, 3-dichloro-1-fluoropropanes and 1, 2, 3-trichloro-1-fluoro-propanes as well 1, 1, 2-trichloro-2-fluoroethane, 1-bromo-2, 2-dichloro-2-fluoroethane, 1, 2, 2-trichloro-2 fluoroethane, 1-bromo-1, 3-dichloro-2, 2-difluoropropane, and 1, 1, 3-trichloro-2,2-difluoropropane were obtained in 50–70% yield.The bromination of E and Z-1, 3-dichloro-1-propenes with molecular bromine in carbon tetrachloride in the dark is non-stereospecific and gives a mixture of erithro and threo-1, 2-dibromo-1, 3-dichloropropanes in the ratio about 1:1. However, the bromination reaction in anhydrous hydrogen fluoride solution proceeds with a high degree of stereospecificity (94–95%) and gives threo-1, 2-dibromo-1, 3-dichloropropane from Z and erithro-1, 2-dibromo-1, 3-dichloropropane from E-1, 3-dichloro-1-propene.The data obtained are considered in terms of an electrophilic mechanism of halogenoalkene halogenation in anhydrous hydrogen fluoride and a free-radical mechanism in carbon tetrachloride.     

Crystal structures and topochemical polymerizations of 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes

Highly conjugated monomers, 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes (methoxy (1a), ethoxy (1b), isopropoxy (1c), benzyloxy (1d), chloroethoxy (1e), and bromoethoxy (1f)), were synthesized. Recrystallizations of 1a, 1c, 1e, and 1f yielded two crystal forms (prisms (1a-A) and needles (1a-B), needles (1c-A) and plates (1c-B), prisms (1e-A) and plates (1e-B), and prisms (1f-A) and needles (1f-B)), which have different molecular packing modes by X-ray crystal structure analysis, indicating that the crystals are polymorphic. In the photopolymerizations of these monomer crystals in the solid state, 1a-A, 1e-A, and 1f-A polymerized topochemically to give crystalline polymers. For their thermal polymerizations in the solid state, in addition to 1a-A, 1e-A, and 1f-A, 1e-B and 1f-B polymerized, but polymers formed from the 1e-B and 1f-B were amorphous. The packing of quinodimethane molecules in the crystals was defined by four kinds of parameters, stacking distance (d(s)), the distance between the reacting exomethylene carbon atoms (d(cc)), the angles formed between the stacking axis and longer axis of the monomer molecule (theta(1)), and the shorter axis of the monomer molecule (theta(2)), and then the polymerization reactivity of these quinodimethanes in the solid state was discussed on the basis of these parameters.     

Syntheses of new model compounds related to an antigenic epitope from Bupleurum falcatum L. and their distributions in various ganglioside-phospholipid monolayers

6-N-[2-(Tetradecyl)hexadecanamido]hexyl beta-D-glucopyranosyluronic acid-(1-->6)-beta-D-galactopyranosyl-(1-->6)-beta-D-galactopyranoside (1) and its clustering compound (2) carrying a tetravalent sugar unit, which are new model compounds related to a major antigenic epitope from antiulcer pectic polysaccharide of Bupleurum falcatum L., were synthesized and the distributions of 1 and 2 in mixed ganglioside (GM1, GD1a or GT1b)/phospholipid (DPPC) monolayers were observed using atomic force microscopy (AFM). AFM images showed that 1 was distributed in the GM1, GD1a and GT1b region of the mixed monolayers, in which 1 was miscible with GD1a. Specific distribution of 1 was observed in the mixed GM1/DPPC monolayer. Compound 2 was miscible with GM1, while 2 formed associations with GD1a and GT1b in the mixed monolayers. The distribution mode of 1 and 2 was different among the mixed ganglioside/DPPC monolayers.     

Sensing cytochrome P450 1A1 activity by a resorufin-based isoform-specific fluorescent probe

Cytochrome P450 1A1 (CYP1A1), a heme-containing monooxygenase, is of particular importance for human health because of its vital roles in the metabolic activation of pro-carcinogenic compounds to the carcinogens. Deciphering the relevance of CYP1A1 to human diseases and screening of CYP1A1 modulators require reliable tool(s) for probing this key enzyme in complex biological matrices. Herein, a practical and ultrasensitive fluorescence-based assay for real-time sensing CYP1A1 activities in biological systems has been developed, via designing an isoform-specific fluorogenic sensor for CYP1A1 (CHPO). The newly developed fluorogenic substrate for CYP1A1 has been carefully investigated in terms of specificity, sensitivity, precision, quantitative linear range and the anti-interference ability. The excellent selectivity, strong anti-interference ability and fast response kinetics, making the practicability of CHPO-based CYP1A1 activity assay is better than that of most reported CYP1A1 activity assays. Furthermore, CHPO has been successfully used for imaging CYP1A1 activities in living cells and human tissues, as well as for high-throughput screening of CYP1A1 inhibitors using tissue preparations as enzyme sources. Collectively, this study provided a practical fluorogenic sensor for real-time sensing CYP1A1 in complex biological systems, which would strongly facilitate the investigations on the relevance of CYP1A1 to human diseases and promote high-throughput screening of CYP1A1 modulators for biomedical applications.     

Sensing cytochrome P450 1A1 activity by a resorufin-based isoform-specific fluorescent probe

Cytochrome P450 1A1 (CYP1A1), a heme-containing monooxygenase, is of particular importance for human health because of its vital roles in the metabolic activation of pro-carcinogenic compounds to the carcinogens. Deciphering the relevance of CYP1A1 to human diseases and screening of CYP1A1 modulators require reliable tool(s) for probing this key enzyme in complex biological matrices. Herein, a practical and ultrasensitive fluorescence-based assay for real-time sensing CYP1A1 activities in biological systems has been developed, via designing an isoform-specific fluorogenic sensor for CYP1A1 (CHPO). The newly developed fluorogenic substrate for CYP1A1 has been carefully investigated in terms of specificity, sensitivity, precision, quantitative linear range and the anti-interference ability. The excellent selectivity, strong anti-interference ability and fast response kinetics, making the practicability of CHPO-based CYP1A1 activity assay is better than that of most reported CYP1A1 activity assays. Furthermore, CHPO has been successfully used for imaging CYP1A1 activities in living cells and human tissues, as well as for high-throughput screening of CYP1A1 inhibitors using tissue preparations as enzyme sources. Collectively, this study provided a practical fluorogenic sensor for real-time sensing CYP1A1 in complex biological systems, which would strongly facilitate the investigations on the relevance of CYP1A1 to human diseases and promote high-throughput screening of CYP1A1 modulators for biomedical applications.     

1, n-Triorganosilyl migrations in the rearrangements of silyl-substituted organolithium compounds

Under the agency of the potent lithiating agent, n-butyllithium in TMEDA, an array of organosilanes was found to undergo 1, n-silyl rearrangements via carbanionic intermediates. Unambiguous 1, 2-, 1, 3- and 1, 4-silyl shifts were uncovered in 1-trimethylsilyl-1, 1, 2-triphenylethane, 1, 1-bis(trimethylsilyl)-1-phenylalkanes and 1, 2-bis(trimethylsilyl)-1, 2-diphenylethane, respectively. Cross-over and competition experiments established that these rearrangements generally are intramolecular and occur with decreasing ease in the order, 1, 2 > 1, 3 > 1, 4. In other compounds, such as 1, 1-bis(trimethylsilyl)-1, 2-diphenylethane, 1, n-bis(trimethylsilyl)benzenes and triphenyl(trimethylsilyl)methane, competing 1, n-silyl shifts occurred. Attack of the organolithium intermediates on solvent and silicon—lithium exchange were significant side reactions in some instances. 1-Trimethylgermyl-1, 1, 2-triphenylgermane underwent no discernible rearrangement but rather gave the product expected from germanium—lithium exchange. By conducting time and competition studies, it was shown that lithiation is the product-determining step in these rearrangements and that dual pathways, namely 1, 3-versus consecutive 1, 2- 1, 4-pathways, are operative in certain rearrangements.     

Regio- and stereoisomeric control of the aggregation of zinc-chlorins possessing inverted interactive hydroxyl and carbonyl groups.

As models for a self-aggregative, naturally occurring magnesium-chlorin bacteriochlorophyll-d possessing 3(1)-secondary alcoholic hydroxyl and 13(1)-oxo groups, zinc-chlorins were synthesized with 3(1)-oxo and 13(1)-secondary (1) or tertiary hydroxyl groups (2). Compared to the monomers in a tetrahydrofuran solution, diastereomers 13(1)R-1R and 13(1)S-1S gave red-shifted absorption maxima (643 --> 674 nm in 1R and 708 nm in 1S) in 1 v/v% CH(2)Cl(2)-hexane solution, indicating their self-aggregation. Therefore, the positioning of the two groups at 3(1)/13(1) or 13(1)/3(1) on the N21-N23 molecular (Q(y)) axis is not necessarily important for the self-aggregation. The (1)H NMR and CD spectroscopic studies showed that the 674 nm absorbing species of 1R was characterized as a face-to-face "closed" dimer, while the 708 nm absorbing species of 1S was a large oligomer constructed with aggregation of head-to-tail "open" dimers. This diastereomeric control over the aggregation of 1R and 1S is more pronounced than that observed in the regioisomerically 3(1)-secondary alcoholic R/S-diastereomers 3R and 3S. The difference is ascribable to the conformational fixation of the 13(1)-hydroxyl group of the exo five-membered ring in 1. In contrast to self-aggregative 3(1)-tertiary alcoholic 4, both 13(1)-epimers of 13(1)-tertiary alcoholic 2 were monomeric even in nonpolar organic media: the additional 13(1)-methyl group (1 --> 2) drastically suppressed the self-aggregation due to the interference of the methyl group in intermolecular pi-pi interaction.     

Interaction between chicken protein tyrosine phosphatase 1 (CPTP1)-like rat protein phosphatase 1 (PTP1) and p60(v-src) in v-src-transformed Rat-1 fibroblasts

CPTP1 is a nontransmembrane chicken protein tyrosine phosphatase having 92% sequence homology to the corresponding 321 amino acids of human protein tyrosine phosphatase 1B (HPTP1B). Using anti-CPTP1 antibody, we identified CPTP1-like rat PTP1 of 51 kDa in Rat-1 and v-src-transformed Rat-1 fibroblasts. Here we show that CPTP1-like rat PTP1 binds to p60(v-src) in vivo and CPTP1 also can associate with p60(v-src) in cell lysate of v-src- transformed Rat-1 fibroblasts. Interaction between HPTP1B-type PTPs, CPTP1-like rat PTP1 and CPTP1, and p60(v-src) was reduced by vanadate treatment for 13 h due to down regulation of the protein level of p60(v-src) in vivo. Interestingly, CPTP1-like rat PTP1 was coimmunoprecipitated with a 70-kDa protein which has a possibility to be tyrosine- phosphorylated by p60(v-src) in v-src-transformed Rat-1 fibroblasts. These results suggest that HPTP1B-type PTPs may play an important role in p60(src) dependent signal pathway in eucaryotic cells.     

Rapid and Convenient Synthesis of N‐Arylmorpholines under Microwave Irradiation

A series of N‐arylmorpholines 1a , 1b , 1c , 1d , 1e , 1f , 1g , 1h , 1i , 1j , 1k , 1l , 1m , 1n was obtained by cyclocondensation of arylamines and diethylene glycol dimesylate under microwave irradiation in an aqueous potassium carbonate medium. The reaction is rapid and convenient, and a variety of functional groups are tolerated in the process.     

A mechanistic insight into caspase-7 inhibition by BIR1-2 domains of XIAP and cIAP1

Previous studies failed to demonstrate any role for the BIR1 domain of the inhibitor of apoptosis proteins (IAPs) in inhibition of executioner caspases. In this study, XIAP-BIR1-2 and c-IAP1-BIR1-2 domains have been used to investigate the role of BIR1 in the inhibition of caspase-7. Kinetic analysis confirmed that caspase-7 was inhibited in an uncompetitive manner at lower concentrations of XIAP-BIR1-2, whereas the inhibition was switched to the mixed type mode at higher concentrations of the inhibitor. In contrast, cIAP1-BIR1-2 inhibited caspase-7 in a mixed type mode at all examined concentrations. These data suggest that the presence of BIR1 is essential for inhibition of caspase-7 by cIAP1. Far-UV CD and fluorescence spectroscopy experiments showed that despite similar secondary structures, XIAP-BIR1-2 and cIAP1-BIR1-2 have different biophysical properties. BIR1-2 domain of XIAP was found to be more flexible than cIAP1, which may be the reason behind differences in their kinetic properties.     

Photochemical reactions of 1-methyl-4,6-diaryl-2(1H)-pyrimidinones in the presence of thiols

Photochemical reactions of 1-methyl-4,6-diaryl-2(1H)pyrimidinones 1a-b in the presence of thiols 2 are described. Irradiation of 1-methyl-4,6-diaryl-2(1H)-pyrimidinones 1a-b in benzene in the presence of thiols 2 gave the unexpected 2:1-adducts, 3-methyl-4,6-diaryl-5-aralkylthio-6-(1′-methyl-4′,6′-diaryldihydro-pyrimidin-2-on)yl-1,3-diazabicyclo[2.2.0]hexan-2-ones 3-6, of 1 and 2, whereas irradiation of 1a-b alone in benzene resulted in recovery of the unchanged 1a-b.     

New processes for the selective production of 1-octene

Linear α-olefins, especially 1-hexene and 1-octene, are key components for the production of LLDPE and the demand for 1-hexene and 1-octene increased enormously in recent years. To meet this demand several processes were developed in the last decade to produce 1-hexene and 1-octene selectively. Here we review the new processes for 1-octene production based on homogeneous catalysts.Sasol's coal-based high temperature Fischer–Tropsch technology produces an Anderson–Schulz–Flory distribution of hydrocarbons with high α-olefin content and the desired alkenes, including 1-heptene and 1-octene, are separated by distillation. In this case, as in the SHOP process, 1-octene constitutes only a minor part of the total yield.Nowadays other technologies are being applied or considered for on-purpose 1-octene production: hydroformylation of 1-heptene, the telomerization of 1,3-butadiene, and ethene tetramerization.1-Heptene can be converted in three steps to 1-octene: (1) hydroformylation of 1-heptene to octanal, (2) hydrogenation of octanal to 1-octanol, and (3) dehydration of 1-octanol to 1-octene. This process was commercialized by Sasol.Dow commercialized a process based on butadiene. Telomerization of butadiene with methanol in the presence of a palladium catalyst yields 1-methoxy-2,7-octadiene, which is fully hydrogenated to 1-methoxyoctane in the next step. Subsequent cracking of 1-methoxyoctane gives 1-octene and methanol for recycle. Recently highly active and stable phosphine based systems were reported that show particularly good performance for the industrially attractive feedstock, the C₄ cut of the paraffin cracker.1-Hexene can be obtained by ethene trimerization by a family of catalysts based mainly on Cr. High selectivity to 1-hexene can be achieved thanks the propensity of the chromium based catalyst to form 7-membered ring metallacycles. Sasol has found catalyst systems that allow the formation of a 9-membered metallacycle in large proportion relative to 7-membered ring formation, yielding 1-octene.     

红外光谱酰胺Ⅲ带用于蛋白质二级结构的测定研究

用甲醇对BSA和RaseA等蛋白质进行变性处理,结合蛋白质酰胺带的拟合结果对酰胺带各二级结构的谱峰进行了初步指认:1330～1290cm^-1为α-螺旋;1295～1265cm^-1为β-转角;1270～1245cm^-1为无规卷曲;1250～1220cm^-1为β-折叠.依据这些谱峰归属,对一些已知二级结构的蛋白质进行了测定,所得结果与X射线衍射数据以及酰胺带的定量结果基本一致.     

Influence of the solvent and metal center on supramolecular chirality induction with bisporphyrin tweezer receptors. Strong metal modulation of effective molarity values

We describe the synthesis of a bisporphyrin tweezer receptor 1·H(4) and its metalation with Zn(II) and Rh(III) cations. We report the thermodynamic characterization of the supramolecular chirality induction process that takes place when the metalated bisporphyrin receptors coordinate to enantiopure 1,2-diaminocyclohexane in two different solvents, toluene and dichloromethane. We also performed a thorough study of several simpler systems that were used as models for the thermodynamic characterization of the more complex bisporphyrin systems. The initial complexation of the chiral diamine with the bisporphyrins produces a 1:1 sandwich complex that opens up to yield a simple 1:2 complex in the presence of excess diamine. The CD spectra associated with the 1:1 and 1:2 complexes of both metalloporphyrins, 1·Zn(2) and 1·Rh(2), display bisignate Cotton effects when the chirogenesis process is studied in toluene solutions. On the contrary, in dichloromethane solutions, only 1·Zn(2) yields CD-active 1:1 and 1:2 complexes, while the 1:2 complex of 1·Rh(2) is CD-silent. In both solvents, porphyrin 1·Zn(2) features a stoichiometrically controlled chirality inversion process, which is the sign of the Cotton effect of the 1:1 complex is opposite to that of the 1:2 complex. In contrast, porphyrin 1·Rh(2) affords 1:1 and 1:2 complexes in toluene solutions with the same sign for their CD couplets. Interestingly, in both solvents, the signs of the CD couplets associated with the 1:1 sandwich complexes of 1·Zn(2) and 1·Rh(2) are opposite. The amplitudes of the CD couplets are higher for 1·Zn(2) than for 1·Rh(2). This observation is in agreement with 1·Rh(2) having a smaller extinction coefficient than 1·Zn(2). We performed DFT-based calculations and assigned molecular structures to the 1:1 and 1:2 complexes that explain the observed signs for their CD couplets. Unexpectedly, the quantification of the thermodynamic stability of the two metallobisporphyrin/diamine 1:1 sandwich complexes revealed the existence of interplay between effective molarity values (EM) and the strength of the intermolecular interaction (K(m); N···Zn or N···Rh) used in their assembly. The EM for the N···Rh(III) intramolecular interaction is 3 orders of magnitude smaller than that for the N···Zn(II) interaction, both of which are embedded in the same scaffold of the 1·M(2) bisporphyrin receptor.     

Donor-Acceptor Complexes in Copolymerization. XXVI. Effect of Solvent,Temperature, and Complexing Agent on the Polymerization of Comonomer Charge Transfer Complexes

The copolymerization of styrene with methyl methacrylate (S/MMA = 4/1) or acrylonitrile (S/AN = 1/1) in the presence of ethylaluminum sesquichloride (EASC) yields 1/1 copolymer in toluene or chlorobenzene. In chloroform the S-MMA-EASC polymerization yields 60/40 copolymer while the S-AN-EASC polymerization yields 1/1 copolymer. In the presence of EASC, styrene-α-chloroacrylonitrile yields 1/1 copolymer (DMF or DMSO), S-AN yields 1/1 copolymer (DMSO) or radical copolymer (DMF), S-MMA yields radical copolymer (DMF or DMSO), α-methylstyrene-AN yields radical copolymer (DMSO) or traces of copolymer (DMF), and α-MS-methacrylo-nitrile yields traces of copolymer (DMSO) or no copolymer (DMF). When zinc chloride is used as complexing agent in DMF or DMSO, none of the monomer pairs undergoes polymerization. However, radical catalyzed polymerization of isoprene-AN-ZnCl₂ in DMF yields 1/1 alternating copolymer. The copolymerization of S/MMA in the presence of EASC yields 1/1 alternating copolymer up to 100°C, while the copolymerization of S/AN deviates from 1/1 alternating copolymer above 50°C. The copolymerization of S/MMA deviates from 1/1 copolymer at MMA/EASC mole ratios above 20 while the copolymerization of S/AN deviates from 1/1 copolymer at MMA/EASC ratios above 50.     

Purification of Complex of SAV1 with PP1A

SAV1 is a core component involved in the Hippo pathway which can control the organ size via regulating cell proliferation and apoptosis simultaneously. We explored the regulatory mechanism of SAV1. We established the HEK293T cell pool, the cells in which can stably express SAV1 by retroviruses infection and found that SAV1 stable cells reduced the movement of themselves and resulted in multicellular aggregation. We purified SAV1 interacting protein complex using streptavidin resin and subsequently analyzed the digested peptides by high performance liquid chromatography(HPLC)-MS/MS. Results show that about 150 proteins were identified in the complex of SAV1 with protein. TUBA1A, OTUD4, and ATD were identified as proteins interacting with SAV1. Importantly, PP1A, serine/threonine protein phosphatase PP1-alpha 1 catalytic subunit, was also in the top 10 list. The interaction between PP1A and SAV1 was detected by both co-immunoprecipitation(CO-IP) and immunostaining. Our results indicate that PP1A might be the phosphatase of SAV1 and may take part in the regulation of the Hippo pathway.     

Synthesis and characterization of an anomeric sulfur analogue of CMP-sialic acid

alpha-2,3-Sialyltransferase catalyzes the transfer of sialic acid from CMP-sialic acid (1) to a lactose acceptor. An analogue of 1 was synthesized in which the anomeric oxygen atom was replaced with a sulfur atom (1S). The key step in the synthesis of 1S was a tetrazole-promoted coupling of a cytidine-5'-phosphoramidite with a glycosyl thiol of a protected sialic acid. Compounds 1 and 1S were characterized for their activity in a sialyl transfer assay. The rate of solvolysis in aqueous buffer of analogue 1S was 50-fold slower than that of 1. Analogue 1S was found to be substrate for alpha-2,3-sialyltransferase. The K(m) of 1S was just 3-fold higher than that of 1, while the k(cat) of 1S was 2 orders of magnitude lower compared to 1.     

UV-Vis, fluorescence and NMR spectroscopic investigations on inclusion properties of a designed tetrahomocalix[8]arene with fullerenes C60 and C70 in solution

The present article reports the spectroscopic investigations on non-covalent interaction of fullerenes C(60) and C(70) with a macrocyclic receptor molecule, namely, 1,3,5,7-tetrahomo-p-tert-butylcalix[8]arene (1) in toluene. Jobs method of continuous variation reveals 1:1 stoichiometry for the fullerene complexes of 1. The most fascinating feature of the present study is that 1 binds selectively C(60) compared to C(70) as obtained from binding constant (K) data of C(60)-1 (K(C60-1)) and C(70)-1 (K(C70-1)) complexes which are enumerated to be 265,000 dm(3) mol(-1) and 63,43 dm(3) mol(-1), respectively, and selectivity in binding (K(C60-1)/K(C70-1)) is estimated to be 4.18 as obtained from UV-Vis study. Steady state fluorescence studies reveal quenching of fluorescence of 1 in presence of fullerenes and the K value of the C(60)-1 and C(70)-1 complexes are estimated to be 80,760 and 68,780 dm(3) mol(-1), respectively, with selectivity in binding (K(C60-1)/K(C70-1)) ~1.18. (1)H NMR analysis provides very good support in favor of strong binding between C(60) and 1. The high value of K value for C(60)-1 complex indicates that 1 forms an inclusion complex with C(60).     

Calculations find that tunneling plays a major role in the reductive elimination of methane from hydridomethylbis(trimethylphosphine)platinum: how to confirm this computational prediction experimentally

DFT calculations, including the effects of small curvature tunneling, have been performed on the reductive elimination of methane from hydridomethylbis(trimethylphosphine)platinum (1d). The calculations find that at 250 K tunneling results in an increase in the rate constant for reductive elimination by a factor of 4, a lowering of Ea by 1.7 kcal/mol, and a decrease in A by a factor of nearly 10. Tunneling is also calculated to increase the primary H/D kinetic isotope effect (KIE) from k(1d)/k(1f) = 2.26 to k(1d)/k(1f) = 4.12 and to result in a large secondary KIE of k(1d)/k(1e) = 1.35. In addition, tunneling is predicted to result in a violation of the rule of the geometric mean, so that the secondary KIE for reductive elimination of methane-d1 from 1f is calculated to be k(1f)/k(1g) = 1.06, which is much smaller than the secondary KIE of k(1d)/k(1e) = 1.35 for reductive elimination of methane from 1d. Comparison of the measured values of k(1d)/k(1e) and k(1f)/k(1g) is therefore proposed as an experimental test of the prediction that tunneling plays an important role in the reductive elimination of methane from 1d.