Water‐sorption kinetics in oil palm fibers

Oil palm fibers represent a very abundant and natural resource for raw materials that can be efficiently utilized as reinforcement in polymers. The sorption characteristics of two types of oil palm fibers—oil palm empty‐fruit‐bunch (OPEFB) fiber and oil palm mesocarp fiber‐in distilled water, mineral water, and water containing salt at four different temperatures were investigated. The uptake of water decreased with an increase in temperature. The OPEFB fiber showed higher sorption than the mesocarp fiber. This was due to the uptake associated with the capillary action in the OPEFB fiber. The thermodynamic parameters of the sorption process were calculated. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1215–1223, 2001     

A Self‐Assembled Superhydrophobic Electrospun Carbon–Silica Nanofiber Sponge for Selective Removal and Recovery of Oils and Organic Solvents

An oil spill needs timely cleanup before it spreads and poses serious environmental threat to the polluted area. This always requires the cleanup techniques to be efficient and cost‐effective. In this work, a lightweight and compressible sponge made of carbon–silica nanofibers is derived from electrospinning nanotechnology that is low‐cost, versatile, and readily scalable. The fabricated sponge has high porosity (>99 %) and displays ultra‐hydrophobicity and superoleophilicity, thus making it a suitable material as an oil adsorbent. Owing to its high porosity and low density, the sponge is capable of adsorbing oil up to 140 times its own weight with its sorption rate showing solution viscosity dependence. Furthermore, sponge regeneration and oil recovery are feasible by using either cyclic distillation or mechanical squeezing.     

Biomimetic Superhydrophobic/Superoleophilic Highly Fluorinated Graphene Oxide and ZIF‐8 Composites for Oil–Water Separation

Superhydrophobic/superoleophilic composites HFGO@ZIF‐8 have been prepared from highly fluorinated graphene oxide (HFGO) and the nanocrystalline zeolite imidazole framework ZIF‐8. The structure‐directing and coordination‐modulating properties of HFGO allow for the selective nucleation of ZIF‐8 nanoparticles at the graphene surface oxygen functionalities. This results in localized nucleation and size‐controlled ZIF‐8 nanocrystals intercalated in between HFGO layers. The composite microstructure features fluoride groups bonded at the graphene. Self‐assembly of a unique micro‐mesoporous architecture is achieved, where the micropores originate from ZIF‐8 nanocrystals, while the functionalized mesopores arise from randomly organized HFGO layers separated by ZIF‐8 nanopillars. The hybrid material displays an exceptional high water contact angle of 162° and low oil contact angle of 0° and thus reveals very high sorption selectivity, fast kinetics, and good absorbencies for nonpolar/polar organic solvents and oils from water. Accordingly, Sponge@HFGO@ZIF‐8 composites are successfully utilized for oil–water separation.     

Fiber‐forming blend polypropylene‐polyvinyl alcohol

The preparation of a fiber‐forming blend consisting of polypropylene and polyvinyl alcohol mixed with glycerol and with polypropylene grafted with maleic anhydride were studied. The physical and mechanical properties of blend fibers were also studied. The rheological measurements for semiquantitative evaluation of technological compatibility of the components and for processing the polymeric material in extruding and spinning process were carried out. The experimental results revealed the technological compatibility of the polypropylene‐polyvinyl alcohol blend in the presence of glycerol and polypropylene grafted with maleic anhydride. The colloidal structure of interface layer is assumed to be in a three‐ or four‐component system. The mixture of polyvinyl alcohol with glycerol allows for the preparation of well spun fiber‐forming polypropylene blends. Polypropylene‐polyvinyl alcohol blend fibers consisting of up to 20% polyvinyl alcohol with sufficient mechanical properties, higher porosity and significantly higher sorption of water than polypropylene fibers alone were prepared. Copyright © 2001 John Wiley & Sons, Ltd.     

Influence of the film‐forming process on the nanostructuration of Pebax®/1‐ethyl‐3‐methylimidazolium triflate ionic liquid: Consequences on the thermal,mechanical, gas,and water transport properties

1‐Ethyl‐3‐methylimidazolium triflate ionic liquid (IL) was incorporated in Pebax® MV 3000 copolymer through solvent cast (SC) or melt blending (MB) for composition from 0 to 30 wt % IL. The morphology was investigated by small angle neutron scattering, transmission electron microscopy, and differential scanning calorimetry. The SC copolymer film exhibited a lower mean correlation distance (D = 87 Å) and smoother transition between the rigid and soft phases in comparison with the MB film (D = 103 Å). By dissolving in the copolymer soft phase, IL acted as a plasticizer, impeded soft segments crystallization and led to linear increase of D. The differences observed in morphology as a function of the film process impacted the mechanical and gas transport properties: below 20 wt % IL, all SC films sustained thermomechanical properties up to 120 °C and exhibited lower permeability than MB films. IL adding made permeability decrease up to 60%, depending on the gas nature and IL amount. Hydration of the films was investigated by sorption and SANS analyses. The impact of water uptake on swelling was similar for all membranes whereas water diffusion depended on the film morphologies and IL amount. Interesting mechanical and transport properties were obtained for IL content up to 20 wt %. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 778–788     

Preparation and properties of graded styrene‐butadiene rubber vulcanizates

Styrene‐butadiene rubber (SBR) vulcanizates with graded network‐chain densities in the thickness direction were prepared by layering and heat pressing the compounding sheets. The effect of the gradient of network‐chain density on the mechanical properties of the graded rubber vulcanizates was investigated in comparison with those of SBR vulcanizates that were prepared from the homogeneous compounding sheets. The matrix with a high network‐chain density exclusively affected the mechanical properties of the graded rubber vulcanizates when the gradient was given in the thickness direction. © 2002 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 358–364, 2002; DOI 10.1002/polb.10096     

Rapid and Direct Conversion of Graphite Crystals into High‐Yielding,Good‐Quality Graphene by Supercritical Fluid Exfoliation

Graphene has attracted a great deal of attention in recent years due to its unusual electronic, mechanical, and thermal properties. Exploiting graphene properties in a variety of applications requires a chemical approach for the large‐scale production of high‐quality, processable graphene sheets (GS), which has remained an unanswered challenge. Herein, we report a rapid one‐pot supercritical fluid (SCF) exfoliation process for the production of high‐quality, large‐scale, and processable graphene for technological applications. Direct high‐yield conversion of graphite crystals to GS is possible under SCF conditions because of the high diffusivity and solvating power of SCFs, such as ethanol, N‐methyl‐pyrrolidone (NMP), and DMF. For the first time, we report a one‐pot direct conversion of graphite crystals to a high yield of graphene sheets in which about 90–95 % of the exfoliated sheets are <8 layers with approximately 6–10 % monolayers and the remaining 5–10 % are ≥10 layers.     

Synthesis and properties of novel sulfonated polyimides from 2,2′‐bis(4‐aminophenoxy)biphenyl‐5,5′‐disulfonic acid

Novel sulfonated polyimides (SPIs) were prepared from 1,4,5,8‐naphthalenetetracarboxylic dianhydride (NTDA), 2,2′‐bis(4‐aminophenoxy)biphenyl‐5,5′‐disulfonic acid (oBAPBDS) with nonlinear configuration, and common nonsulfonated diamines. Water uptake (WU) in liquid and vapor, water stability, and proton conductivity σ of the resulting SPI membranes were investigated. They were soluble in m‐cresol and dimethylsulfoxide, and their WUs in liquid were much larger than those of the SPIs from other sulfonated diamines with linear configuration such as 4,4′‐bis(4‐aminophenoxy)biphenyl‐3,3′‐disulfonic acid (BAPBDS). NTDA‐oBAPBDS membrane was soluble in water at room temperature, whereas all the oBAPBDS‐based copolyimide membranes were insoluble in water and maintained mechanical strength after being soaked in distilled water at 80 °C for 40–1000 h. This much improved water stability was due to the enhanced solubility stability of membrane toward water. The water vapor sorption isotherms were rather similar between the SPIs with the nonlinear and linear configurations of sulfonated diamine moieties. The present SPIs with IECs of 1.8–2.6 meq/g, including NTDA‐BAPBDS, showed reasonably high proton conductivities under the highly humid conditions and roughly fell on the same σ–WU relation line. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1432–1440, 2004     

Flexible,Stretchable, and Rechargeable Fiber‐Shaped Zinc–Air Battery Based on Cross‐Stacked Carbon Nanotube Sheets

The fabrication of flexible, stretchable and rechargeable devices with a high energy density is critical for next‐generation electronics. Herein, fiber‐shaped Zn–air batteries, are realized for the first time by designing aligned, cross‐stacked and porous carbon nanotube sheets simultaneously that behave as a gas diffusion layer, a catalyst layer, and a current collector. The combined remarkable electronic and mechanical properties of the aligned carbon nanotube sheets endow good electrochemical properties. They display excellent discharge and charge performances at a high current density of 2 A g⁻¹. They are also flexible and stretchable, which is particularly promising to power portable and wearable electronic devices.     

Flexible,Stretchable, and Rechargeable Fiber‐Shaped Zinc–Air Battery Based on Cross‐Stacked Carbon Nanotube Sheets

The fabrication of flexible, stretchable and rechargeable devices with a high energy density is critical for next‐generation electronics. Herein, fiber‐shaped Zn–air batteries, are realized for the first time by designing aligned, cross‐stacked and porous carbon nanotube sheets simultaneously that behave as a gas diffusion layer, a catalyst layer, and a current collector. The combined remarkable electronic and mechanical properties of the aligned carbon nanotube sheets endow good electrochemical properties. They display excellent discharge and charge performances at a high current density of 2 A g^?1. They are also flexible and stretchable, which is particularly promising to power portable and wearable electronic devices.     

Three‐Dimensional Macroporous NiCo2O4 Sheets as a Non‐Noble Catalyst for Efficient Oxygen Reduction Reactions

A facile and low‐cost strategy is developed to prepare three‐dimensional (3D) macroporous NiCo₂O₄ sheets, which can be used as a highly efficient non‐noble metal electrocatalyst for the oxygen reduction reaction (ORR) in alkaline conditions. The as‐obtained sheets have a thickness of about 150 nm and feature a typical 3D macroporous structure with pore volumes of up to 0.23 cm³ g^?1, which could decrease the mass transport resistance and allow easier access of the reactants to the active surface sites. The as‐prepared macroporous NiCo₂O₄ sheets exhibit high electrocatalytic activity for ORR with a four‐electron pathway, good long‐term stability and high tolerance against methanol. The unique 3D macroporous structure and intrinsic properties may be responsible for their high performance.     

Preparation and properties of molecular‐weight‐controlled polyimides derived from 1,4‐bis(4′‐amino‐2′‐trifluoromethylphenoxy)benzene and 4,4′‐oxydiphthalic anhydride

A series of molecular‐weight‐controlled fluorinated aromatic polyimides were synthesized through the polycondensation of a fluorinated aromatic diamine, 1,4‐bis(4′‐amino‐2′‐trifluoromethylphenoxy)benzene, with 4,4′‐oxydiphthalic anhydride in the presence of phthalic anhydride as the molecular‐weight‐controlling and end‐capping agent. Experimental results demonstrated that the resulting polyimides could melt at temperatures of 250–300 °C to give high flowing molten fluids, which were suitable for melt molding to give strong and flexible polyimide sheets. Moreover, the aromatic polyimides also showed good solubility both in polar aprotic solvents and in common solvents. Polyimide solutions with solid concentrations higher than 25 wt % could be prepared with relatively low viscosity and were stable in storage at the ambient temperature. High‐quality polyimide films could be prepared via the casting of the polyimide solutions onto glass plates, followed by baking at a relatively low temperature. The molten behaviors and organosolubility of the molecular‐weight‐controlled aromatic polyimides depended significantly on the polymer molecular weights. Both the melt‐molded polyimide sheets and the solution‐cast polymer films exhibited outstanding combined mechanical and thermal properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1997–2006, 2006     

Oil‐Soluble Polymer Brush Grafted Nanoparticles as Effective Lubricant Additives for Friction and Wear Reduction

The development of high performance lubricants has been driven by increasingly growing industrial demands and environmental concerns. Herein, we demonstrate oil‐soluble polymer brush‐grafted inorganic nanoparticles (hairy NPs) as highly effective lubricant additives for friction and wear reduction. A series of oil‐miscible poly(lauryl methacrylate) brush‐grafted silica and titania NPs were synthesized by surface‐initiated atom transfer radical polymerization. These hairy NPs showed exceptional stability in poly(alphaolefin) (PAO) base oil; no change in transparency was observed after being kept at ?20, 22, and 100 °C for ≥55 days. High‐contact stress ball‐on‐flat reciprocating sliding tribological tests at 100 °C showed that addition of 1 wt % of hairy NPs into PAO led to significant reductions in coefficient of friction (up to ≈40 %) and wear volume (up to ≈90 %). The excellent lubricating properties of hairy NPs were further elucidated by the characterization of the tribofilm formed on the flat. These hairy NPs represent a new type of lubricating oil additives with high efficiency in friction and wear reduction.     

Water‐sorption behaviors of poly(3,4′‐oxydiphenylene pyromellitimide) films depending on the thickness variation

The effect of film thickness on the water‐sorption behaviors of poly(3,4′‐oxydiphenylene pyromellitimide) (PMDA‐3,4′ODA) films was gravimetrically investigated and interpreted with a Fickian diffusion model in films. The diffusion coefficient increased with increasing film thickness, whereas the water uptake and the activation energy decreased. Overall, the water‐sorption behaviors of PMDA‐3,4′ODA films are strongly dependent on the changes in morphological structure, which originated from the variation in the film thickness. As the film thickness increased, the molecular in‐plane orientation decreased, consequently leading to the increased diffusion coefficient and decreased activation energy. In contrast, the water uptake decreased with increasing film thickness because of the increase in the out‐of‐plane packing order. The diffusion coefficient and activation energy were strongly dependent on the in‐plane orientation in the films. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 669–676, 2001     

Literature review on superhydrophobic self‐cleaning surfaces produced by electrospinning

Self‐cleaning surface is potentially a very useful addition for many commercial products due to economic, aesthetic, and environmental reasons. Super‐hydrophobic self‐cleaning, also called Lotus effect, utilizes right combination of surface chemistry and roughness to force water droplets to form high contact angle on a surface, easily roll off a surface and pick up dirt particles on its way. Electrospinning is a promising technique for creation of superhydrophobic self‐cleaning surfaces owing to a wide set of parameters that allow effectively controlling roughness of resulted webs. This article gives a brief introduction to the theory of super‐hydrophobic self‐cleaning and basic principles of the electrospinning process and reviews the scientific literature where electrospinning was used to create superhydrophobic surfaces. The article reviewed are categorized into several groups and their results are compared in terms of superhydrophobic properties. Several issues with current state of the art and highlights of important areas for future research are discussed in the conclusion. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Fabrication of robust superhydrophobic coatings using PTFE‐MWCNT nanocomposite: Supercritical fluid processing

Fabrication of polymer‐carbon composite nanostructure with good dispersion of each other is critical for the desired application due to the nanostructure flaws, agglomeration, and poor absorption between the 2 materials. Fabrication of superhydrophobic surface coating composites of polytetrafluoroethylene (PTFE) with multiwalled carbon nanotubes (MWCNTs) through supercritical fluid processing was explored in this study. Homogeneity of the composite was characterized by X‐ray diffraction and Raman spectroscopy studies, which reveal that the PTFE and MWCNT are uniform in the composite. Microstructural surface evaluation of field‐emission scanning electron microscope and high‐resolution transmission electron microscope studies display that the coating composite possesses roughness structures and fibrillation of the superhydrophobic surface coating. Superhydrophobic character was evaluated on fiber‐reinforced plastic (FRP) sheets, which showed that the prepared coating composite surface showed self‐cleaning properties with a high water contact angle of 162.7°. The surface wettability was studied by increasing different temperatures (30°C to 300°C) in PTFE‐MWCNT composite, which reveals that the FRP sheets were thermally stable up to 200°C and afterward; they transformed from superhydrophobic to hydrophilic state at 250°C. The superhydrophobic surfaces are thermally stable in extreme environmental conditions, and this technique may be used and extendable for large‐scale applications.     

Development of molecularly imprinted microspheres for the fast uptake of 4‐cumylphenol from water and soil samples

Molecularly imprinted microspheres containing binding sites for the extraction of 4‐cumylphenol have been prepared for the first time. The imprinted microspheres were synthesized by a precipitation method using 4‐cumylphenol as a template molecule, methacrylic acid as a functional monomer and divinylbenzene‐80 as a cross‐linker for polymer network formation. The formation and the morphology of molecularly imprinted microspheres were well characterized using infrared spectroscopy, thermogravimetric studies, and scanning electron microscopy. The Brunauer–Emmett–Teller analysis revealed the high surface area of the sorbent indicating formation of molecularly imprinted microspheres. The developed microspheres were employed as a sorbent for the solid‐phase extraction of 4‐cumylphenol and showed fast uptake kinetics. The sorption parameters were optimized to achieve efficient sorption of the template molecule, like pH, quantity of molecularly imprinted microspheres, time required for equilibrium set‐up, sorption kinetics, and adsorption isotherm. A standard method was developed to analyze the sorbed sample quantitatively at 279 nm using high‐performance liquid chromatography with diode array detection. It was validated by determining target analyte from synthetic samples, bottled water, spiked tap water, and soil samples. The prepared material is a selective and robust sorbent with good reusability.     

High‐pressure sorption of carbon dioxide and methane in all‐aromatic poly(etherimide)‐based membranes

The sorption of compressed carbon dioxide and methane in a series of all‐aromatic poly(etherimide) (PEI) thin films is presented. The polymer films are derived from the reactions between an arylether diamine (P1) and four different dianhydrides [3,3′,4,4′‐oxydiphthalic dianhydride (ODPA), 3,3′,4,4′ biphenyltetra‐carboxylic dianhydride (BPDA), 3,3′,4,4′‐benzo‐phenonetetracarboxylic dianhydride (BTDA), and pyromellitic dianhydride (PMDA)] that have been selected to systematically change the flexibility of the polymer backbone, the segmental mobility, and the nonequilibrium excess free volume (EFV) of the polymer. The EFV, gas sorption capacities, and sorption‐ and temperature‐induced dynamic changes in film thickness and refractive index have been investigated by spectroscopic ellipsometry. The sorption capacity depends to a great extent on the PEI backbone composition. PMDA‐P1 shows the highest carbon dioxide sorption, combined with the lowest sorption selectivity because of the predominant sorption of methane in the EFV. For ODPA‐P1, the highest sorption selectivity is obtained, while it shows little long‐term relaxations at carbon dioxide pressures up to 25 bar. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 986–993     

Water sorption by poly(tetrahydrofurfuryl methacrylate‐co‐2‐hydroxyethyl methacrylate). I. A mass‐uptake study

Cylindrical samples (≈5 mm × 20 mm) of poly(2‐hydroxyethyl methacrylate) and copolymers of 2‐hydroxyethyl methacrylate and furfuryl methacrylate were prepared, and the sorption of water into these cylinders was studied by the mass‐uptake method and by the measurement of the volume change at equilibrium. The equilibrium water content and volume change for the cylinders both varied systematically with the copolymer composition. The diffusion of water into the cylinders followed Fickian behavior, with the diffusion coefficients, dependent on the copolymer composition, varying from 2.00 × 10⁻¹¹ m²s⁻¹ for poly(2‐hydroxyethyl methacrylate) to 5.00 × 10⁻¹² m²s⁻¹ for poly(2‐hydroxyethyl methacrylate‐co‐tetrahydrofurfuryl methacrylate) with a 1 : 4 composition. The polymers that were rich in 2‐hydroxyethyl methacrylate were characterized by a water‐sorption overshoot, which was attributed to a slow reorientation of the polymer chains in the swollen rubbery regions formed after water sorption. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1939–1946, 2000     

Bio‐Inspired Stable Lithium‐Metal Anodes by Co‐depositing Lithium with a 2D Vermiculite Shuttle

Progress in lithium‐metal batteries is severely hindered by lithium dendrite growth. Lithium is soft with a mechanical modulus as low as that of polymers. Herein we suppress lithium dendrites by forming soft–hard organic–inorganic lamella reminiscent of the natural sea‐shell material nacres. We use lithium as the soft segment and colloidal vermiculite sheets as the hard inorganic constituent. The vermiculite sheets are highly negatively charged so can absorb Li⁺ then be co‐deposited with lithium, flattening the lithium growth which remains dendrite‐free over hundreds of cycles. After Li⁺ ions absorbed on the vermiculite are transferred to the lithium substrate, the vermiculite sheets become negative charged again and move away from the substrate along the electric field, allowing them to absorb new Li⁺ and shuttling to and from the substrate. Long term cycling of full cells using the nacre‐mimetic lithium‐metal anodes is also demonstrated.