Synthesis and rearrangement of 4-imino-4H-3,1-benzoxazines

Summary N-Acylanthranilamides react with dibromotriphenylphosphorane in the presence of triethylamine as HBr captor to give 4-imino-4H-3,1-benzoxazines in good yields. If the reaction is carried out without acid acceptor, N-acetylanthranilamides yield 2-methyl-4-quinazolones, whereas N-benzoylanthranilamides give 2-phenyl-4-imino-4H-3,1-benzoxazines. It has also been found that 2-methyl-4-imino-4H-3,1-benzoxazines rearrange under the influence of HCl or HBr into the respective 2-methyl-4-quinazolones; 2-phenyl-4-imino-4H-3,1-benzoxazines, however, do not undergo such a rearrangement.

---

Synthese und Umlagerung von 4-Imino-4H-3,1-benzoxazinen

Zusammenfassung Die Umsetzung von N-Acyl-anthranilsäure-amiden mit Triphenyldibromphosphoran in Gegenwart von Triethylamin als HBr-Akzeptor führt mit guten Ausbeuten zu 4-Imino-4H-3,1-benzoxazinen. Wird die Reaktion ohne säurebindendes Mittel durchgeführt, dann entstehen aus N-Acetyl-anthranilsäure-amiden 2-Methylchinazolone-4, jedoch erhält man aus N-Benzoylanthranilsäure-amiden 2-Phenyl-4-imino-4H-3,1-benzoxazine. 2-Methyl-4-imino-4H-3,1-benzoxazine erleiden unter dem Einfluß von HBr oder HCl eine Umlagerung in entsprechende 2-Methylchinazolone-4, während 2-Phenyl-4-imino-4H-3,1-benzoxazine zu einer solchen Umlagerung nicht befähigt sind.

     

Electronic structures of the boron cage molecules B4H4, B4Cl4 and B4F4

Ab initio calculations have been performed on B₄H₄, B₄Cl₄ and B₄F₄ in order to aid our understanding of the bonding in these compounds, which is presumably based on a tetrahedral boron cage. This cage has only 8 electrons and so is less than that expected on the basis of the usual framework electron counting rules. Basis sets with polarisation functions were used at the SCF, CI and CPF levels of theory to confirm that the T _d structures are indeed more stable than the D _4h ones. Davidson-Roby population analyses were able to show that many factors, including 3-centre 2-electron bonding and backbonding from the ligand to the boron cage, are of importance in determining the relative stability of the three compounds, of which B₄Cl₄ is the only one that has yet been observed experimentally.     

2-Trif luoromethyl-4H-thiochromen-4-one and 2-trif luoromethyl-4H-thiochromene-4-thione: Synthesis and reactivities

2-Trifluoromethyl-4H-thiochromene-4-thione obtained from 2-trifluoromethyl-4H-thiochromen-4-one and P₂S₅ reacts with aromatic amines, hydrazine hydrate, phenylhydrazine, and hydroxylamine at the C(4) atom of the chromene ring to give the corresponding anils, azine, hydrazones, and oxime of thiochromone. 2-Trifluoromethyl-4H-thiochromen-4-one is oxidized by hydrogen peroxide in AcOH into 4-oxo-2-trifluoromethyl-4H-thiochromene 1,1-dioxide and reduced by NaBH₄ to 2-trifluoromethyl-4H-thiochromen-4-ol or cis-2-(trifluoromethyl)thiochroman-4-ol. When treated with hydrazine hydrate, thiochromen-4-one gives 3(5)-(2-mercaptophenyl)-5(3)-trifluoromethylpyrazole. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 504–509, March, 2006.     

UCr4C4 with filled MoNi4 type structure

The title compound was prepared by arc melting coldpressed pellets of the elemental components with subsequent annealing at both 800°C or 1100°C. UCr₄C₄ crystallizes tetragonal, space group I4/m,a=0.79363 (4) nm,c=0.30754 (3) nm,V=0.19370 nm³ withZ=2 formula units per cell. The structure was determined from single-crystal X-ray data and refined to a residual ofR=0.027 for 16 variable parameters and 279 structure factors. The positions of the metal atoms correspond to those of the MoNi₄ type structure. The carbon atoms occupy octahedral voids formed by four chromium and two adjacent uranium atoms. Chemical bonding in UCr₄C₄ and in other interstitial compounds is briefly discussed. The average valence electron number of the metal atoms is usually greater for the unfilled (host) structure than for the corresponding filled structure.Dedicated to Prof. Dr.Kurt Komarek and to Prof. Dr.Adolf Neckel on the occasion of their 60th birthdays.     

Reactivity of FeVO4 towards MgMoO4 in the solid-state

A compound of the formula Fe₃Mg₂Mo₂V₃O₂₀ has been obtained as a result of a reaction between FeVO₄ and MgMoO₄ taken at a molar ratio of 3:2. This compound crystallises in the monoclinic system and its unit cell parameters are the following: a=0.6971 nm, b=0.9055 nm,c=1.2542 nm, g=102.00°, Z=2. This revised version was published online in July 2006 with corrections to the Cover Date.     

A Facile One-Pot Synthesis of 4-Acyl and 4-(1-Hydroxyethyl)Sydnones

A series of 4-formyl-, 4-acetyl- and 4-(l'-hydroxyethyl)sydnones have been prepared in good yields by reaction of sydnone with butyllithium or a Grignard reagent and N,N-dimethylformamide, N,N-dimethylacetamide and acetylaldehyde, respectively.     

Reaction of 4-methyl-4-tribromomethylcyclohexa-2,5-dien-1-one with zinc metal

4-Methyl-4-tribromomethylcyclohexa-2,5-dien-1-one reacts with zinc dust in absolute DMF to give a mixture of 4-bromo-5-methylcyclohepta-2,4,6-trien-1-one, 4-methyl-cyclohepta-2,4,6-trien-1-one, and 4-dibromomethyl-4-methylcyclohexa-2,5-dien-1-one. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 177–178, January, 1998.     

A Convenient Route for the Synthesis of 4-Aryl- and 4-Aminopyrimidines

Summary. A series of ureidopropenenitriles were synthesised by Knoevenagel condensation of ArCOCH₂CN and HC(OEt)₃ in presence of ureas in a one pot reaction. These ureidopropenenitriles were cyclised to 4-aryl-5-cyano-3-substituted pyrimidines (in acid) or to 4-amino-5-benzoylpyrimidines (in base) in 60–70% yields. The amine pyrimidine derivatives were further converted to substituted uracils by hydrolysis with isopentyl nitrite in DMF. Alkylation of uracils furnished 1,3-dimethyluracil derivatives with DMS in alkali. All new compounds were characterised by spectral and analytical methods.     

Synthese und Kristallstruktur zweier Formen von Ammoniummonomolybdat (NH4)2MoO4

Synthesis and Structure of Two Forms of Ammonium Monomolybdate (NH₄)₂MoO₄ Ammonium monomolybdate (NH₄)₂MoO₄ exists in two different polymorphic forms which differ in their lattice constants and in the arrangement of the ammonium cations relative to the molybdate anions. The ammonium molybdates (NH₄)₂MoO₄(mS60)¹⁾ and (NH₄)₂MoO₄(mP60)²⁾ are synthesized by the reaction of ammonia and (NH₄)₆[Mo₇O₂₄] · 4 H₂O. (NH₄)₂MoO₄(mS60) crystallizes isostructural to the potassium compound in space group C2/m (Nr. 12) and lattice constants a = 1263.6(3), b = 652.2(1) pm, c = 776.4(2) pm and β = 117.36(1)° (V = 568.3(2) · 10⁶ pm³) containig four formula units per unit cell (R = 0.0250). (NH₄)₂MoO₄(mP60) crystallizes monoclinic in space group P2₁/n (Nr. 14) and lattice constants a = 622.8(2), b = 777.0(1) pm, c = 1118.8(4) pm and β = 98.09(2)° (V = 536.0(3) · 10⁶ pm³) (R = 0.0205). The different arrangements of the polyhedra within the unit cell is caused by hydrogen bridges. A transition point was not yet determined.     

Beiträge zur Chemie des Phosphors. 236. Über einige physikalische und chemische Eigenschaften von Diphosphan(4)

Contributions to the Chemistry of Phosphorus. 236. On Several Physical and Chemical Properties of Diphosphane(4) The density of diphosphane(4) has been measured between ?78°C and +18°C and the value d₄²⁰ = 1.014 · 0.002 extrapolated. The refractive index of P₂H₄ was determined to be n²⁰ = 1.66 ± 0.01. The surface tension at 0°C and ?50°C was measured to be σ = 34 and 42 dyn · cm^?1, respectively. In the UV absorption spectrum, gaseous P₂H₄ exhibits a broad absorption band at λ_max = 2 220 Å, in n-hexane solution, this band is shifted somewhat to shorter wave-lengths. The molar extinction coefficient was determined to be ? ≈? 900 1 · mol^?1 · cm^?1. As a result of photolytic decomposition, absorptions for PH₃ and more phosphorus-rich hydrides also occur. The solubility behavior of P₂H₄ in various organic solvents and the stabilities of the resultant solutions have been investigated. At 0°C, the solubility of diphosphane(4) in water was found to be ± 035 ± 0.003 g P₂H₄/100 g solution and that of water in diphosphane(4) to be 43.2 ± 1.6 g H₂O/100 g solution. The system diphosphane(4)/methanol also exhibits a miscibility anomaly. The IR spectra of liquid P₂H₄ and of its solutions in various solvents revealed, in accord with the results of nuclear magnetic resonance spectroscopy [7], that diphosphane(4) is practically not associated. Weak interactions through hydrogen bridging bonds occur with pyridine and methanol in which P₂H₄ serves as the proton donor and, in the latter case, also as proton acceptor. For the thermolysis of diphosphane(4), it has been found that the primary step comprises a disproportionation with inter-molecular elimination of PH₃ and formation of triphosphane(5). With further progress of the thermolysis, in dependence on the reaction conditions, mixtures of various phosphanes of differing composition are formed. Photolysis gives rise to phosphane mixtures having similar compositions. With aqueous silver salt and iodine solutions, diphosphane(4) reacts as a reducing agent; with sodium hydroxide solution, it reacts by a slow disproportionation as well as by formation and degradation of the subsequently formed polyphosphides. On reaction with triphenylmethyl, triphenylmethane and a yellow solid of varying composition are formed. The reaction of diazomethane with diphosphane(4) leads to the preferential insertion of the carbene in the P? P bond and formation of methylenebis(phosphane).     

4-Phosphoranylidene-5(4H)-oxazolones II. Reactions with alkylating agents

Summary When treated with alkyl halides at 20–90°C without solvent or in acetonitrile, 4-phosphoranylidene-5(4H)-oxazolones (1) give 4-C-alkylation products4 in good yields. Alkylation of1 with alkyl triflates in CH₂Cl₂ at room temperature results in O-alkylation products5. No O-to 4-C-alkylation rearrangement can be observed. The spectroscopic properties of the alkylation products are reported and discussed.

---

4-Phosphoranyliden-5(4H)-oxazolone, 2. Mitt. Reaktionen mit Alkylierungsreagentien

Zusammenfassung Behandlung von 4-Phosphoranyliden-5(4H)-oxazolonen (1) mit Alkylhalogeniden bei 20–90°C ohne Lösungsmittel oder in Acetonitril liefert in guten Ausbeuten die 4-C-alkylierten Produkte4. Alkylierung von1 mit Alkyltriflaten in CH₂Cl₂ bei Raumtemperatur ergibt O-alkylierte Produkte (5). E6 wurde keine Umlagerung von O-alkylierten zu C-alkylierten Verbindungen beobachtet. Die spektroskopischen Eigenschaften der Alkylierungsprodukte werden berichtet und diskutiert.

     

Synthesis of 4H-benz[de]anthracen-4-ones via 1,2-addition of metal acetylides to benzanthrone

Easy and facile syntheses of the 4H-benz[de]anthracen-4-one derivatives were achieved by the reaction of benzanthrone and lithium acetylides, followed by the treatment with silica gel in CHCl₃.     

Synthesis and Antimicrobial Activity of Quinazolin-4(3H)-ones Incorporating Sulfonamido-4-thiazolidinone

Some new derivatives 7‐chloro‐2‐[2‐(2,6‐dichlorophenyl)amino]benzyl‐3‐[4‐(2‐substituted phenyl‐4‐oxo‐ thiazolidin‐3‐yl)phenyl]sulfonamido‐quinazolin‐4(3H)‐ones 5a – 5l were synthesized from 2‐[2‐(2,6‐dichloro‐phenyl)amino]phenyl acetic acid via acid chloride, benzoxazinone, amino quinazolin‐4(3H)‐one and Schiff base formation. The synthesized compounds were screened for in vitro antibacterial and antifungal activities by broth micro dilution method. Some of the Schiff base as well as 4‐thiazolidinone derivatives showed promising antibacterial activity while pronounced antifungal activity was observed against C. albicans.     

On Aliovalent Substitution on the Li Site in LiMPO4: an ­X‐ray Diffraction Study of the Systems LiMPO4–M1.5PO4 (= LixM1.5–x/2PO4; M = Ni,Co, Fe,Mn)

In this paper we report on the possibility of Li substitution by M²⁺ to various high degrees in LiMPO₄ olivine‐type compounds (M = Ni, Co, Fe, Mn), depending on the kind of transition metal M. The experimental studies were carried through by reacting stoichiometric amounts of LiM^IIPO₄ and M^II_1.5PO₄ (= M^II₃(PO₄)₂) to form compounds of composition Li_xM^II_1.5–x/2PO₄ (0 ≤ x ≤ 1). A complete solid solution over the whole range of x was found for M = Ni (together with a second order structural transition from orthorhombic to monoclinic for decreasing x), whereas far smaller degrees of dopability of the Li site were found for LiCoPO₄ and LiFePO₄ (up to compositions of approx. (Li_0.8Co_0.1)CoPO₄ and approx. (Li_0.9Fe_0.05)FeO₄. In addition, the nearly stoichiometric monoclinically distorted olivine‐type compounds with compositions (Li_0.42–0.47Co_0.29–0.265)CoPO₄ and (Li_0.14–0.16Fe_0.43–0.42)FePO₄ could be identified and are described in this article.     

Synthesis and Characterization of New Thiazolidin-4-one Derivatives

The synthesis of some new functionalized thiazolidin-4-one derivatives has been described. The N-substituted-thiosemicarbazides 3a-3i were obtained though the reaction of alkylamines 2a–2i , carbon disulfide, and hydrazine hydrate. The condensation reaction between 3a–3i and 4-amino-2-methanesulfanylpyrimidine-5-carboxaldehyde 1 afforded the thiosemicarbazones 4a–4i . The corresponding thiazolidin-4-ones 5a–5i were prepared by cyclization of 4a–4i with ethyl bromoacetate. The structures of the final products were confirmed by IR, ¹ H NMR, ¹³ C NMR, and HRMS.     

A Novel 3D Framework Coordination Polymer based on Succinato bridged Helical Chains Connected by 4, 4' ‐ Bipyridine: [Cu(bpy)(H2O)2(C4H4O4)]?2H2O

Blue needle—shaped crystals of [Cu(bpy)(H₂O)₂(C₄H₄O₄)]· 2H₂O were obtained by slow evaporation of a methanolic aqueous solution containing a fresh Cu(C₄H₄O₄)· 2H₂O precipitate, 4, 4′—bipyridine, and ammonia. Within the complex, the six—coordinated Cu atoms are linked by bis—monodentate gauche succinate anions into chains propagating helically around the [001] axis. The chains are interconnected by 4, 4′—bipyridine ligands into a 3D framework with the crystal H₂O molecules located in the channels along the [100], [010] and [110] directions. The Cu²⁺ ions are in distorted octahedral coordination of two nitrogen and four oxygen atoms (equatorial bonds: Cu—N 1.986(5), 2.015(5)Å; Cu—O 1.950(6), 1.954(6)Å; axial bonds Cu—O: 2.524(9), 2.539(8)Å). Furthermore, the thermal and magnetic behavior of the compound will be discussed. Crystal data: hexagonal, P6₁ (no. 169), a = 11.066(2)Å, c = 24.965(5)Å, V = 2647.5(8)ų, Z = 6, R = 0.0528 and wR₂ = 0.1103 for 1426 observed reflections (F_o² > 2σ(F_o²)) out of 2170 unique reflections.     

4-Phosphoranylidene-5(4H)-oxazolones — A novel synthesis and properties

Summary 4-Phosphoranylidene-5(4H)-oxazolones (2), a hardly known class of phosphorus ylides, were readily prepared from 4-unsubstituted-5-(4H)-oxazolones (1) by treatment with Ph₃P-Br₂, Bu₃P-Br₂, Ph₃P-CCl₄, or Ph₃P-CBr₄ adducts in the presence of triethylamine in CH₂Cl₂ at room temperature in a novel, efficient one-pot procedure. The spectroscopic properties of the ylides are reported and discussed.

---

4-Phosphoranyliden-5(4H)-oxazolone — Eine neue Synthese und Eigenschaften

Zusammenfassung 4-Phosphoranyliden-5(4H)-oxazolone, eine sehr wenig bekannte Gruppe der Phosphor-ylide, wurden auf einfache Weise nach einem neuen Eintopfverfahren mit guten Ausbeuten hergestellt. Als Ausgangsverbindungen wurden 4-unsubtituierte-5-(4H)-Oxazolone (1) eingesetzt, die unter der Einwirkung von Addukten wie Ph₃P-Br₂, Bu₃P-Br₂, Ph₃P-CCl₄ oder Ph₃P-CBr₄ in Anwesenheit von Triethylamin in CH₂Cl₂ bei Zimmertemperatur die Titelverbindungen liefern. Die spektroskopischen Eigenschaften der Ylide werden berichtet und diskutiert.

     

Synthesis,Crystal Structure and Reducibility of K2NiF4 Type Oxides Sm2—xSrxCuO4

K2NiF4 type compounds Sm2-xSrxCuO4(0≤x≤1.2)were prepared.Rietveld refinement of powder diffraction data shows that the crystal system of these compounds belongs to T′ type tetragonal structure of space group I4/mmm,and the addition of Sr causes a dramatic shift of the O(I) ions along the c axis from Sm(Sr) toward Cu while scarcely affecting the Cu-O(Ⅱ）bond in basal CuO4 phane.From XRD data,it can be seen that when 0.0≤x≤0.6,Sm2-xSrxCuO4 belongs to a singlephase K2NiF4 type structure,while at x≥0.7,both the free SrO phase and the CuO phase exist in these compounds.From the results of XPS and rietveld refinement,it can be seen that after replacing Sm^3 with Sr^2 of lower valence,the valence of Cu and Sm does not change apparently,and thus some defect must be formed at the oxygen ion positions and/or position A on A2BO4 to keep charge balance and to stabilize the structure.     

Relative thermodynamic stabilities of 2-substituted 4-methylene-1,3-dioxolanes and 4-methyl-1,3-dioxoles

The relative thermodynamic stabilities of 24 pairs of carbon-carbon double-bondexo-endo isomeric 2-substituted 4-methylene-1,3-dioxolanes (a) and 4-methyl-1,3-dioxoles (b) have been determined by base-catalyzed chemical equilibration in DMSO solution. In all cases, theendo isomer (b) is the favored species at thermodynamic equilibrium. A single alkyl substitutent on C-2 gives only a negligible contribution to the relative stability of the isomeric forms, but the presence of two alkyl groups on C-2 increases the relative stability of theendo isomer by 2–3 kL mol^–1. A still higher effect in favor of theendo isomer is produced by introduction of a single alkoxy group on C-2; this effect is further slightly accentuated by 2,2-dialkoxy substitution at C-2. The origin of the favorable effect of 2-alkoxy substitution on the relative stability of theendo isomer is not clear, but it seems to arise from an unexpected stability of theendo isomer rather than from an enhanced destabilization of theexo form.     

Practical Synthesis of 4-Benzylidene-2-phenyl-5(4H)-oxazolones

A simple and alternative method has been developed for the synthesis of 4-benzylidene-2-phenyl-5(4H)-oxazolones via reactions of hippuric acid with various aldehydes in the presence of 2-chloro-4,6-dimethoxy-1,3,5-triazine/N-methylmorpholine at 75 °C.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.