Selective solid-phase extraction of trace mercury(II) using a silica gel modified with diethylenetriamine and thiourea

We describe a solid phase extractor for selective separation and preconcentration of Hg(II) ion. It was prepared by immobilizing the adduct of diethylenetriamine and thiourea on silica gel. The effects of solution acidity, preconcentration time, sample flow rate and volume were optimized. The results show that Hg(II) can be selectively extracted from acidic solutions and in presence of common other metal ions. The adsorbent is stable, can be reused more than 10 times, and the maximum adsorption capacity is 23 mg g^?1. Hg(II) was quantified by inductively coupled plasma optical emission spectrometry. The method has a detection limit of 23 ng L^?1, and the relative standard deviation is <2 %. The procedure was validated by analyzing two standard materials (river sediment and hair powder), and was successfully applied to the preconcentration of Hg(II) in real samples.

Preparation of corn stalk-based adsorbents and their specific application in metal ions adsorption

Corn stalk-based adsorbents modified from corn stalk were prepared by Cu(0)-mediated reversible-deactivation radical polymerization (Cu(0)-mediated RDRP). They were applied to remove metal ions and they exhibited good adsorption capacity, especially for Hg(II). Adsorption properties of corn stalk can be enhanced by introducing cyano, amino, amidoxime, and carboxyl groups onto its surface, which results in efficient adsorbents for different metal ions. TGA, SEM, EA, and FTIR analyses were employed to characterize the structures of corn stalk-graft-polyacrylonitrile (CS-g-PAN), corn stalk-graft-polyacrylamide (CS-g-PAM), amidoxime corn stalk-graft-polyacrylonitrile (AO CS-g-PAN) and carboxyl corn stalk-graft-poly(methyl acrylate) (CO CS-g-PMA). The maximum adsorption capacity for Hg(II) was 8.06 mmol g^?1 of AO CS-g-PAN. Kinetics of the Hg(II) adsorption on AO CS-g-PAN was found to follow the pseudo-second-order model and the adsorption isotherms were well fitted with the Freundlich isotherm model.     

Dye removal using 4A-zeolite/polyvinyl alcohol mixed matrix membrane adsorbents: preparation,characterization, adsorption,kinetics, and thermodynamics

In pursuit of improving performance of the methylene blue adsorption process, the potential of a novel 4A-zeolite/polyvinyl alcohol (PVA) membrane adsorbent was investigated. Adding 4A-zeolite particles to the PVA membrane adsorbent provided an effective structure for the adsorptive membrane in dye removal processes. Effect of zeolite content was also studied via synthesis of different mixed matrix membrane adsorbents (MMMAs) with 5, 10, 15, and 20 wt% 4A-zeolite content. Morphology of MMMAs was analyzed by scanning electron microscope and the intermolecular interactions were determined by Fourier transform infrared spectroscopy. X-ray diffraction was performed to determine the crystal structure of MMMAs. For the sake of finding optimum condition, the adsorption capacity was examined at various operating parameters, such as contact time, temperature, pH, and initial concentration. The maximum value of the adsorption capacity (q _e) of 41.08 mg g^?1 and the highest removal efficiency of 87.41 % were obtained by applying 20 wt% loading of 4A-zeolite. The experimental data were fitted well with the Freundlich adsorption isotherm model (R ² = 0.9917) compared with the Langmuir (R ² = 0.9489) and the Tempkin (R ² = 0.8886) adsorption isotherm models, and the adsorption kinetic data verified the best fitting with the pseudo-second-order model (R ² = 0.9999). The estimated data for Gibb’s free energy (ΔG°) showed that the adsorption process is spontaneous at lower temperature values and non-spontaneous at higher temperature values. Other evaluated thermodynamic parameters such as changing in enthalpy (ΔH°) and entropy (ΔS°) revealed that the adsorption process is exothermic with an increase in orderliness at the solid/solution interface.     

Adsorptive recovery of geniposidic acid from gardenia yellow pigment extraction wastewater by anion exchange: equilibrium,thermodynamics and mechanism modeling and simulation

For many years, the traditional process of gardenia yellow pigment extraction has produced wastewater containing significant quantities of Geniposidic acid (GSA), a substance that could be put to pharmacological uses if it could be effectively recovered. This study aimed to provide an efficient adsorption material, D08, for recycling GSA. Batch experiments showed that adsorption capacity depends on initial concentration and temperature. The maximal adsorption capacity of GSA onto an anionic exchanger reached 310 mg/g. The pK _a value of GSA was determined to be 4.21. Pore diffusion coefficients (D _p) of GSA for 283, 298 and 313 K were 3.274 × 10^?10, 5.069 × 10^?10 and 7.356 × 10^?10 m²/s, respectively. Recovery efficiency of GSA was achieved to 99.81 %. In comparison with pseudo first-order and pseudo second-order equations, the PDM model demonstrated the best fit to the kinetics data of GSA adsorption. Adsorption/desorption experiments proved that D08 offers great adsorption capacity, high adsorption rate and good repeatability. In order to help us to accurately comprehend the mass transfer process, numerical simulation and post-processing to variables c(r, t) and q(r, t) were performed to clarify the adsorption process.     

Readily prepared resin-bound 2-pyridinethiol and its application for removal of mercury ions

2-Pyridinethiol attached to commercially available monosize chloromethylated polystyrene was used for selective removal of Hg(II) from aqueous solutions containing different amounts of Hg(II) (10?C100?ppm). The adsorption rate was high at the beginning of the reaction and then equilibrium was reached in about 10?min. The maximum Hg(II) adsorption capacity of this novel and stable resin was about 55.94?mg/g of the dry polymer. The Hg(II) adsorption ability increased with increasing pH, in the range where the solubility of the Hg(II) was not affected by pH. More than 95% of the adsorbed Hg(II) was desorbed in 15?min using 1?M HNO₃ as an elution agent. The regeneration of this resin by strong acid was feasible and desorption ratio was very high (up to 96%).     

Removal of Th(IV), Ni(II)and Fe(II) from aqueous solutions by a novel PAN–TiO<Subscript>2</Subscript> nanofiber adsorbent modified with aminopropyltriethoxysilane

A novel polyacrylonitrile (PAN)–titanium oxide (TiO₂) nanofiber adsorbent functionalized with aminopropyltriethoxysilane (APTES) was fabricated by electrospinning. The adsorbent was characterized by SEM, FTIR, TEG and BET analyses. The pore diameter and surface area of the adsorbent were 3.1 nm and 10.8 m² g^?1, respectively. The effects of several variables, such as TiO₂ and amine contents, pH, interaction time, initial concentration of metal ions, ionic strength and temperature, were studied in batch experiments. The kinetic data were analyzed by pseudo-first-order, pseudo-second-order and double-exponential models. Two isotherm models, namely Freundlich and Langmuir, were used for analysis of equilibrium data. The maximum adsorption capacities of Th(IV), Ni(II) and Fe(II) by Langmuir isotherm were found to be 250, 147 and 80 mg g^?1 at 45 °C with pH of 5, 6 and 5, respectively, and greater adsorption of Th(IV) could be justified with the concept of covalent index and free energy of hydration. Calculation of ΔG°, ΔH° and ΔS° demonstrated that the nature of the Th(IV), Ni(II) and Fe(II) metal ions adsorption onto the PAN–TiO₂–APTES nanofiber was endothermic and favorable at a higher temperature. The negative values of ΔG° for Th(IV) showed that the adsorption process was spontaneous, but these values for Ni(II)and Fe(II) were positive and so the adsorption process was unspontaneous. Increasing of ionic strength improved the adsorption of Ni(II) and Fe(II) on nanofiber adsorbent but decreased the adsorption capacity of Th(IV). The adsorption capacity was reduced slightly after six cycles of adsorption–desorption, so the nanofiber adsorbent could be used on an industrial scale. The inhibitory effect of Ni(II) and Fe(II) on the adsorption of Th(IV) was increased with an increase in the concentration of inhibitor metal ions.     

Comparative efficacy of locally isolated fungal strains for Pb(II) removal and recovery from water

The present investigation aimed to study and compare the efficiency of non-viable fungal isolates to remove divalent lead (Pb(II)) from aqueous streams. The selected fungal isolates showed identity with Aspergillus caespitosus, Aureobasidium sp. RBSS-303 and Aspergillus flavus HF5 as confirmed using gene sequencing of ITS regions of the ribosomal DNA (rDNA). The obtained equilibrium data for Pb(II) biosorption of A. caespitosus fitted better to Langmuir isotherm with maximum sorption capacity of 351.0 mg/g and A. sp. RBSS-303 and A. flavus HF5 showed good fit to Freundlich isotherm with maximum sorption capacity of 271.5 and 346.3 mg/g respectively. The values of thermodynamic factors ascertained the nature of adsorption process is endothermic with A. caespitosus and A. flavus HF5 but exothermic with A. sp. RBSS-303. The experimental data for Pb(II) biosorption fits very well to pseudo second order kinetic model. With HCl the maximum 85.5, 75.3, 73.7% recovery of Pb(II) was obtained from A. caespitosus, A. sp. RBSS-303 and A. flavus HF5, respectively. The observed percentage loss in sorption capacity of Pb(II) was 3.9% by A. flavus HF5, 12.2% by A. caespitosus and 26.6% by A. sp. RBSS-303 after five cyclic studies of sorption and desorption. Results from the study confirmed the efficiency order of A. caespitosus > A. flavus HF5 > A. sp. RBSS-303 to remove and recover Pb(II) from aqueous solution. Finally, the fungal biosorbents can be used as soil conditioning agent after compositing into valuables fungal protein.     

Sol–gel derived ion imprinted thiocyanato-functionalized silica gel as selective adsorbent of cadmium(II)

A Cd(II)-imprinted thiocyanato-functionalized silica gel adsorbent with high adsorption capacity was prepared by surface imprinting technique combined with sol–gel process for the selective adsorption of Cd(II) ion in aqueous solution, and was characterized by Fourier-transform infrared spectroscopy, nitrogen gas sorption and thermogravimetric analysis. The influences of different conditions (such as the pH of solutions, the contact time and the initial concentrations of Cd(II) ions) on the adsorption capacity of Cd(II) were investigated. The optimum pH of adsorption was in the range of 4–8.5. The adsorption equilibrium could be reached in 20 min. The relatively selectivity coefficients of the imprinted silica were higher than those of the non-imprinted adsorbents. Ho’s pseudo-second-order model well described the kinetics of the adsorption reaction. The adsorption process of metals followed Redlich–Peterson isotherm model, and the experimental value of maximum adsorption capacity for Cd(II) was 72.8 mg·g^?1. The positive value of ΔH ^o suggested endothermic nature of Cd(II) adsorption on the imprinted silica adsorbent. Increase in entropy of adsorption reaction was shown by the positive value of ΔS ^o and the negative value of ΔG ^o indicating that the adsorption was spontaneous in nature.     

Effective ultrasound-assisted removal of heavy metal ions As(III), Hg(II), and Pb(II) from aqueous solution by new MgO/CuO and MgO/MnO<Subscript>2</Subscript> nanocomposites

A series of new (MgO) _x CuO and (MgO) _x MnO₂ nanocomposites were prepared and used as adsorbent for removal of As³⁺, Hg²⁺, and Pb²⁺ ions from aqueous solution with high capacity and detection limit. These nanocomposites were synthesized with different molar ratios by sonochemical method in alkaline solution using polyvinylpyrrolidone as a capping agent and were characterized by FTIR, AAS, UV–Vis spectroscopy, and TEM and SEM imaging. The maximum heavy metal ions adsorption was achieved for (MgO)_0.32CuO and (MgO)_2.9MnO₂ nanocomposites assisted by 3-min sonication using ultrasound. Adsorbent capacity of (MgO)_0.32CuO reached 500.0 mg/g and detection limit was 0.1 ppb for As³⁺. Also (MgO)_2.9MnO₂ nanocomposite adsorbed 457.1 mg/g of Hg²⁺ and 461.2 mg/g of Pb²⁺. Extremely low detection limits of 1.5 and 2.0 ppb were obtained for Hg(II) and Pb(II) ions, respectively, which are much lower than the WHO allowable limits. So, these nanocomposites should be excellent candidate for heavy metal removal with advantage of high capacity, high sensitivity, cost effectiveness and easy preparation.     

Facilitated transport of palladium(II) across polymer inclusion membrane with ammonium ionic liquid as effective carrier

This work focuses on the application of polymer inclusion membrane (PIM) with tricaprylmethylammonium thiosalicylate, [A336][TS] (TOMATS), a thiol-containing task-specific ionic liquid for the transport of Pd(II) ions from aqueous solutions. 0.3 M thiourea in 0.1 M hydrochloric acid was found the most effective stripping phase in the transport of Pd(II) from membrane phase containing TOMATS. Separation of Pd(II) ions was also carried out from hydrochloric acid solution containing Pt(IV), Fe(III), Ni(II), and Mn(II). Pd(II) ions were preferably transported in the presence of these metal ions. The separation coefficients followed the order: S _Pd/Pt < S _Pd/Fe < S _Pd/Ni < S _Pd/Mn. [A336][TS] proved to be an excellent ion carrier for Pd(II) from hydrochloric acid solution. The results also showed that transport efficiency of the PIM was reproducible and it can be useful for the development of the simple and highly effective method of Pd(II) recovery from leach liquor of spent catalysts.     

Kinetic,mechanism and equilibrium studies on removal of Pb(II) using <Emphasis Type="Italic">Citrus limettioides</Emphasis> peel and seed carbon

The sorption behaviour of Pb(II) ions onto activated carbon prepared from Citrus limettioides peel (CLPC) and seed (CLSC), which is a novel waste material, was evaluated as a function of contact time, pH, adsorbent dose, ionic strength, initial metal ion concentration and temperature in batch adsorption processes with raw Citrus limettioides peel (CLP) and seed (CLS). The maximum uptake of lead(II) ions was obtained at pH range 4.0–6.0 for CLPC, CLSC and 5.0–6.0 for raw materials (CLP, CLS). The optimal contact time was found to be 3 h. Surface morphology and functionality of the adsorbent were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis and Fourier-transform infrared (FT-IR) spectroscopy. The equilibrium data fit well with the Langmuir isotherm, confirming monolayer coverage of lead(II) ions onto CLP, CLPC, CLS and CLSC. The Langmuir monolayer adsorption capacity of CLP, CLPC, CLS and CLSC was found to be 123.60, 166.67, 15.32 and 142.86 mg/g. The calculated thermodynamic parameters showed that the sorption process was feasible, spontaneous and exothermic in nature. Kinetic studies demonstrated that adsorption of lead(II) ions followed a pseudo-second-order equation, suggesting that the adsorption process is presumably chemisorption. The adsorbents were tested for removal of Pb(II) from electroplating wastewater in connection with the reuse and selectivity of the adsorbents.     

Use of the ionic liquid trioctylmethyl ammonium dodecanedioate as a corrosion inhibitor of steel in production water

The properties of trioctylmethyl ammonium dodecanedioate (TAD) as a corrosion inhibitor (CI) of API 5L X52 steel in production water (PW) were evaluated in steady state using weight loss and polarization techniques within a Reynolds number (N _Re ) interval ranging from 500 to 40,000. The highest obtained IE was 87 % at 100 ppm with N _Re  = 2500, whereas the lowest IE was 15 % at 10 ppm with N _Re  = 4000. TAD was classified as a mixed-type CI of API 5L X52 steel in PW. The \(\Delta G_{\text{ads}}^{^\circ }\) data established a relationship between the N _Re and the adsorption process, confirming the occurrence of physical adsorption phenomena.     

Synthesis,characterization, antimicrobial evaluation and QSAR studies of organotin(IV) complexes of Schiff base ligands of 2-amino-6-substituted benzothiazole derivatives

A series of organotin(IV) complexes of type R₂SnLCl [R = Ph, Bu, Et, Me] were prepared by reaction of diorganotindichloride(IV) with Schiff base ligands, L₁ = (1-[(6-ethoxy-benzothiazol-2-ylimino)-methyl]-naphthalen-2-ol), L₂ = (1-[(6-nitro-benzothiazol-2-ylimino)-methyl]-naphthalen-2-ol), L₃ = (1-[(6-methoxy-benzothiazol-2-ylimino)-methyl]-naphthalen-2-ol) and L₄ = (1-[(6-methyl-benzothiazol-2-ylimino)-methyl]-naphthalen-2-ol) obtained from 2-amino-6-substituted benzothiazole derivatives with 2-hydroxy-1-naphthaldehyde in 1:1 molar ratio. These organotin(IV) complexes were characterized by various spectroscopic techniques (¹H, ¹³C and ¹¹⁹Sn NMR, FT-IR), and physical techniques (X-ray powder diffraction analysis and elemental analysis). The coordination of the prepared complexes has been planned as pentacoordinated around the central tin atom during which ligands coordinated to tin atom in bidentate manner acted as N, O donor system. The ligands and their complexes were screened for antibacterial and antifungal activities against Gram-positive bacteria Bacillus cereus (MTCC 10072), Staphylococcus aureus (NCIM 2901), Gram-negative bacteria Escherichia coli (MTCC 732), Pseudomonas aeruginosa (MTCC 424) and fungi Aspergillus niger (MTCC 9933) and Aspergillus flavus (ATCC 76801). The output of QSAR analysis indicated that topological parameters (molecular connectivity indices) were responsible for controlling the antimicrobial activity of the synthesized compounds.     

Modeling of fixed-bed column studies for removal of cobalt ions from aqueous solution using <Emphasis Type="Italic">Chrysanthemum indicum</Emphasis>

The present study investigates the adsorption capability of raw and biochar forms of Chrysanthemum indicum flowers biomass to remove cobalt ions from aqueous solution in a fixed-bed column. Column adsorption experiments were conducted by varying the bed height (1.0, 2.0, 3.0 cm), flow rate (1.0, 2.5, 5.0 mL min^?1) and initial cobalt ion concentration (25, 50, 75 mg L^?1) to obtain the experimental breakthrough curves. The adsorption capacity of the raw and biochar forms of C. indicum flowers were found to be 14.84 and 28.34 mg g^?1, respectively, for an initial ion concentration of 50 mg L^?1 at 1.0 cm bed height and 1.0 mL min^?1 flow rate for Co (II) ion adsorption. Adam–Bohart, Thomas and Yoon–Nelson models were applied to the experimental column data to analyze the column performance. The Thomas model was found to best represent the column data with the predicted and experimental uptake capacity values correlating well and with higher R ² values for all the varying process parameters. Desorption studies revealed the suitability of the adsorbents for repeated use up to four adsorption–desorption cycles without significant loss in its efficiency. It can thus be inferred from the fixed-bed column studies that C. indicum flowers can suitably be used as an effective adsorbent for Co (II) ion removal from aqueous solution on a higher scale.     

Treatment of chromium effluent by adsorption on chitosan activated with ionic liquids

This study proposes, verifies, and refines the use of biopolymers treated with two new ionic liquids (ILs) (sec-butylammonium acetate and n-octylammonium acetate), as a platform for chromium adsorption. The ILs were synthesized, characterized, and applied to chitosan treatment. Analyzing the size distribution of microparticles of chitosan and chitosan activated with ILs (sec-butylammonium acetate and n-octylammonium acetate), we observed that a little decrease in the particle size occurred with the activation of chitosan (176 ± 0.02 μm to 167 ± 0.054 and 168.5 ± 0.05 μm, respectively), as well as changes in the X-ray diffraction FTIR_ATR spectra. Further studies were performed using the best adsorbent – chitosan treated with sec-butylammonium acetate. In this case, the chromium VI concentration in the sample was reduced by more than 99% when using chitosan treated with IL sec-butylammonium acetate. The best reaction time was determined as 1 h, which allowed a chromium adsorption of 99.1% and the adsorption kinetic data were best represented by the second-order model (k₂ = 11.7258 g mg^?1 min^?1). The maximum adsorption capacity was obtained using the Langmuir isotherm model (20.833 mg g^?1 at pH 4 during 1 h, using 1.0 g of chitosan), and the adsorption efficiency was enhanced at 25 °C by the Freundlich isotherm model, in which the constants KF and n were determined as 0.875 mg L^?1 and 1.610, respectively.     

Preconcentration of mercury(II) using a thiol-functionalized metal-organic framework nanocomposite as a sorbent

A novel type of porous metal-organic framework (MOF) was obtained from thiol-modified silica nanoparticles and the copper(II) complex of trimesic acid. It is shown that this nanocomposite is well suitable for the preconcentration of Hg(II) ions. The nanocomposite was characterized by Fourier transfer infrared spectroscopy, X-ray powder diffraction, energy-dispersive X-ray diffraction and scanning electron microscopy. The effects of pH value, sorption time, elution time, the volume and concentration of eluent were investigated. Equilibrium isotherms were studied, and four models were applied to analyze the equilibrium adsorption data. The results revealed that the adsorption process obeyed the Langmuir model. The maximum monolayer capacity and the Langmuir constant are 210 mg g^?1 and 0.273 L mg^?1, respectively. The new MOF-based nanocomposite is shown to be an efficient and selective sorbent for Hg(II). Under the optimal conditions, the limit of detection is 20 pg mL^?1 of Hg(II), and the relative standard deviation is <7.2 % (for n?=?3). The sorbent was successfully applied to the rapid extraction of Hg(II) ions from fish, sediment, and water samples.

Heavy Metal Resistances and Chromium Removal of a Novel Cr(VI)-Reducing Pseudomonad Strain Isolated from Circulating Cooling Water of Iron and Steel Plant

Three bacterial isolates, GT2, GT3, and GT7, were isolated from the sludge and water of a circulating cooling system of iron and steel plant by screening on Cr(VI)-containing plates. Three isolates were characterized as the members of the genus Pseudomonas on the basis of phenotypic characteristics and 16S rRNA sequence analysis. All isolates were capable of resisting multiple antibiotics and heavy metals. GT7 was most resistant to Cr(VI), with a minimum inhibitory concentration (MIC) of 6.5 mmol L^?1. GT7 displayed varied rates of Cr(VI) reduction in M2 broth, which was dependent on pH, initial Cr(VI) concentration, and inoculating dose. Total chromium analysis revealed that GT7 could remove a part of chromium from the media, and the maximum rate of chromium removal was up to 40.8 %. The Cr(VI) reductase activity of GT7 was mainly associated with the soluble fraction of cell-free extracts and reached optimum at pH 6.0～8.0. The reductase activity was apparently enhanced by external electron donors and Cu(II), whereas it was seriously inhibited by Hg(II), Cd(II), and Zn(II). The reductase showed a K _m of 74 μmol L^?1 of Cr(VI) and a V _max of 0.86 μmol of Cr(VI) min^?1 mg^?1 of protein. The results suggested that GT7 could be a promising candidate for in situ bioremediation of Cr(VI).     

Preparation and adsorption properties of glucose molecularly imprinted polymers in hydrous solution for effective determination of glucose in fruits by MISPE–HPLC

In this paper, a kind of surface molecular imprinting polymers in hydrous solution, with glucose selectively recognition, was successfully synthesized by surface molecular imprinting method, using glucose (Glu) as template molecule, acrylamide as functional monomers, N,N′-methylenebisacrylamide as the cross-linking agent, ammonium peroxydisulfate as the initiator, activated silica gel (SiO₂@NH₂) as support particles. The influences of cross-linker, initiator as well as support particles amount on the adsorption capacity of Glu-MIPs were performed by single-factor experiments. The optimum conditions were 100 mg of cross-linker, 25 mg of initiator and 1 g of SiO₂@NH₂. The adsorption and thermodynamics research revealed that the adsorption of MIPs was fitted to Langmuir, maximum imprinting factor of 2.49 and maximum absorption capacity of 50.06 mg/g. Furthermore, a procedure of extraction of glucose from real fruits samples using the Glu-MIPs as solid-phase extraction adsorbent was developed to apply in analytical techniques.     

Synthesis,crystal structure,and DNA-binding studies of a one-dimensional copper(II) polymer bridged both by oxamidate and thiocyanato ligands

A new one-dimensional copper(II) polymer, [Cu₄(dmapox)₂(SCN)₄(CH₃OH)₂] _n , where dmapox is the dianion of N,N′-bis[3-(dimethylamino)propyl]oxamide, was synthesized and characterized by elemental analysis, conductivity measurement, IR, and electronic spectral studies. The crystal structure of the copper(II) complex has been determined by X-ray single-crystal diffraction. The complex crystallizes in triclinic, space group P ? 1 and exhibits infinite one-dimensional copper(II) polymeric chain bridged both by bis-tridentate μ-trans-dmapox and μ-1,3-thiocyanato ligand. The environment around the copper(II) atom can be described as distorted square-pyramid. The Cu···Cu separations through the oxamidate and thiocyanato bridges are 5.246(2) Å (Cu1–Cu1ⁱ), 5.2649(14) Å (Cu2–Cu2ⁱⁱ), and 5.8169(15) Å (Cu1–Cu2), respectively. The interaction of the copper(II) complex with herring sperm DNA (HS-DNA) has been investigated by using absorption and emission spectral and electrochemical techniques and viscometry. The results reveal that the copper(II) complex may interact with DNA in the mode of groove binding with the intrinsic binding constant of 2.56 × 10⁵ M^?1.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.