Electrochemistry of Zirconium Tetrachloride in the Ionic Liquid N‐Butyl‐N‐methylpyrrolidinium Bis(trifluoromethylsulfonyl)imide: Formation of Zr(III) and Exploitation of ZrCl4 as a Facile Ionic Liquid Drying Agent

The electrochemistry of zirconium tetrachloride in the ionic liquid N‐butyl‐N‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide has been studied, and the one electron reduction is proved by chronoamperometry. Furthermore, we report the application of ZrCl₄ as a facile and general ionic liquid drying agent for use in voltammetry.     

Elucidation of the Electrochemical Oxidation Pathway of Ammonia in Dimethylformamide and the Room Temperature Ionic Liquid, 1‐Ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide

The direct electrochemical oxidation of ammonia has been examined in both the organic solvent dimethylformamide (DMF) and the room temperature ionic liquid 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][N(Tf)₂]. The corresponding voltammetric responses have been shown to be similar in each solvent with a broad oxidative wave occurring upon the introduction of ammonia to the solution and the appearance of a new reductive wave following the oxidation. The oxidative reaction process has been examined and a suitable reaction pathway has been deduced, corresponding to the formation of ammonium cations after oxidation of the ammonia. A linear response of limiting current against vol% ammonia was observed in both DMF and [EMIM][N(Tf)₂], suggesting potential application for analytical methods.     

Effects of Ionic Liquid [Me3NC2H4OH]+[ZnCl3]− on γ‐Radiation Polymerization of Methyl Methacrylate in Ethanol and N,N‐Dimethylformamide

Summary: Radiation‐induced polymerization of methyl methacrylate (MMA) in ethanol (EtOH) and N,N‐dimethylformamide (DMF) in the presence of ionic liquid [Me₃NC₂H₄OH]⁺[ZnCl₃]⁻ is reported. A substantial increase in monomer conversion and molecular weight is observed at room‐temperature ionic liquid (RTIL) >60 vol.‐%, and the resulting PMMA has a broad multimodal MWD. A clear difference in the MWD pattern is noted between EtOH/RTIL and DMF/RTIL systems, probably due to the complicated interactions between the solvent and ionic liquid.

Gel permeation chromatography traces of poly(methyl methacrylate) obtained by radiation polymerization in EtOH/RTIL and DMF/RTIL mixed solvent. Organic/RTIL (v/v): 1) 100:0; 2) 80:20; 3) 60:40; 4); 40:60; 5) 0:100.     

离子液体催化剂用于煤焦化苯深度脱硫制无硫苯

从扩大有机合成用苯的需求出发,采用研制的离子液体催化剂考察了煤焦化苯深度脱硫制无硫苯的过程。结果表明：N-甲基咪唑硫酸氢盐[Hmim][HSO₄]离子液体催化剂脱噻吩效果与其酸函数值有关。本文采用Hammett指示剂测定离子液体的酸函数H₀,并得出：在-4至-12的范围,离子液体催化剂可以使煤焦化苯噻吩脱至0. 5mg/L以下。与固体酸催化机理相似,酸量和酸强度一定的离子液体催化剂通过Friedel-Crafts反应形成烷基噻吩等,与苯的物性拉开距离,对苯的分离精制是必不可少的,但是过多、过强的[Hmim][HSO₄]酸值也更有利于苯-噻吩-烯烃共聚合等副反应的发生,从而影响离子液体催化剂重复使用的寿命。本研究利用煤焦化苯脱硫反应形成的噻吩衍生物作为提供电荷流通的聚合物,将反复使用后性能不佳的离子液体成分等作为“受电子型”和“给电子型”的掺杂剂,进行导电（抗静电）材料的制备。结果显示：对煤焦化苯脱硫形成的噻吩衍生物等可以用于掺杂导电材料的试制。     

Semidilute solution structure of cellulose in an ionic liquid and its mixture with a polar organic co‐solvent studied by small‐angle X‐ray scattering

Structural and thermodynamic properties of cellulose solutions in the ionic liquid 1‐ethyl‐3‐methylimidazolium acetate (EMIMAc) and its binary mixtures with N,N‐dimethyl formamide (DMF) are studied by small‐angle X‐ray scattering (SAXS). These measurements indicate molecular dissolution of the cellulose chains without any significant aggregation. The power–law relationships of the evaluated correlation length and osmotic modulus to concentration exhibit exponents of ?0.76 and 2.06 for EMIMAc and ?0.80 and 2.14 for DMF/EMIMAc solvent mixture, respectively. Thus, these solvents can be considered to be good solvents for cellulose. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 888–894     

酸性离子液体催化的羟基化合物对N-对甲苯磺酰基氮杂环丙烷的开环反应

本文研究了羟基化合物对两种类型N-对甲苯磺酰基氮杂环丙烷的开环反应。在功能性离子液体[hmim]HSO4存在条件下,氮杂环丙烷与醇反应,以中等到高的产率和非常高的区域选择性得到对应的β-胺基醚。并且离子液体[hmim]HSO4可以循环使用。     

离子液体选择性萃取生物产品

Imidazolium based room temperature ionic liquids have been used to extract selectively L-tryptophan from fermentation broth. BF4 anion was found to enhance dramatically the partitioning of L-tryptophan into ionic liquid phase from aqueous solutions.     

Polymerizable Ionic Liquid Crystals

Polymerizable vinylimidazolium ionic liquids (ILs) that contain mesogenic coumarin and biphenyl units, respectively, have been synthesized. The N‐alkylation of N‐vinylimidazole with bromoalkylated mesogenic units 7‐(6‐bromohexyloxy)coumarin ( 1 ) and 4,4′‐bis(6‐bromohexyloxy)biphenyl ( 2 ) was then carried out. The thermal behavior of the obtained ILs 3 and 4 was investigated by differential scanning calorimetry and polarizing optical microscopy. These measurements showed that the attached mesogenic units induce the self‐assembly of ILs and, therefore, the occurrence of liquid crystalline phases. Subsequently, the ionic liquid crystals (ILCs) 3 and 4 were polymerized by a free‐radical mechanism.

     

Controlled Polymerization of Protic Ionic Liquid Monomer by ARGET‐ATRP and TERP

The direct synthesis of structurally well‐defined protic polymeric ionic liquid (PIL) with controlled molecular weight and molecular weight distribution is examined using N,N‐diethyl‐N‐(2‐methacryloylethyl) ammonium bis(tri‐fluoromethylsulfonyl)imide (DEMH‐TFSI) as a monomer. Three polymerization methods, namely, atom transfer radical polymerization (ATRP), activators regenerated by electron transfer (ARGET)‐ATRP, and organotellurium‐mediated living radical polymerization (TERP) are employed in this study. While the polymerization by ATRP is slow and does not reach high monomer conversion that under ARGET‐ATRP and TERP proceeds smoothly and affords structurally well‐defined poly(DEMH‐TFSI)s. TERP is especially efficient for the control and poly(DEMH‐TFSI)s with low to high molecular weights ( = 49 100–392 500) and narrow molecular weight distributions (/ = 1.17–1.46) are obtained. These results represent the first example of synthesis of a structurally well‐defined protic, ammonium PIL by direct polymerization of the protic ionic liquid monomer. The polymerization of N,N‐diethyl‐N‐(2‐methacryloylethyl)‐N‐methylammonium bis(trifluoromethylsulfonyl)imide (DEMM‐TFSI), which possesses a quaternary ammonium salt, also proceeds in a highly controlled manner under TERP conditions. A diblock copolymer, polystyrene‐block‐poly(DEMH‐TFSI), is also successfully synthesized by TERP.

     

Temperature‐controlled ionic liquid‐dispersive liquid‐phase microextraction for preconcentration of chlorotoluron,diethofencarb and chlorbenzuron in water samples

This article describes a new, rapid and sensitive method for the determination of chlorotoluron, diethofencarb and chlorbenzuron from water samples with temperature‐controlled ionic liquid‐dispersive liquid‐phase microextraction. In the preconcentration procedure, ionic liquid 1‐hexyl‐3‐methylimidazolium hexafluorophosphate [C₆MIM] [PF₆] was employed as the extraction solvent. The parameters, such as volume of [C₆MIM] [PF₆], sample pH, extraction time, centrifuging time, temperature and salting‐out effect, were investigated in detail. Under the optimal extraction conditions, it has been found that three analytes had excellent LODs (S/N=3) in the range of 0.04–0.43 μg/L. The RSDs (n=6) were in the range of 1.3–4.7%. The proposed method was evaluated with lake water, tap water and melted snow water samples. The experimental results indicated that the proposed method had excellent prospect and would be widely used in the future.     

离子液体中13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽5,7,12,14(13H)-四酮衍生物的绿色高效合成

在离子液体[bmim+][BF4-]中高产率的合成了一系列13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽-5,7,12,14(13H)-四酮类化合物。该反应操作步骤简单,离子液体易于与产物分离,并且离子液体可以循环使用。     

Double‐Stimuli‐Responsive Spherical Polymer Brushes with a Poly(ionic liquid) Core and a Thermoresponsive Shell

The synthesis of poly(ionic liquid) (PIL) nanoparticles grafted with a poly(N‐isopropyl acrylamide) (PNIPAM) brush shell is reported, which shows responsiveness to temperature and ionic strength in an aqueous solution. The PIL nanoparticles are first prepared via aqueous dispersion polymerization of a vinyl imidazolium‐based ionic liquid monomer, which is purposely designed to bear a distal atom transfer radical polymerization (ATRP) initiating group attached to the long alkyl chain via esterification reaction. The size of the PIL nanoparticles can be readily tuned from 25 to 120 nm by polymerization at different monomer concentrations. PNIPAM brushes are successfully grafted from the surface of the poly(ionic liquid) nanoparticles via ATRP. The stimuli‐responsive behavior of the poly(ionic liquid) nanoparticles grafted with PNIPAM brushes (NP‐g‐PNIPAM) in aqueous phase is studied in detail. Enhanced colloidal stability of the NP‐g‐PNIPAM brush particles at high ionic strength compared to pure PIL nanoparticles at room temperature is achieved. Above the lower critical solution temperature (LCST) of PNIPAM, the brush particles remain stable, but a decrease in hydrodynamic radius due to the collapse of the PNIPAM brush onto the PIL nanoparticle surface is observed.

     

Ionic‐Liquid‐Influenced Expeditious and Stereoselective Synthesis of Olefins

1‐Butyl‐3‐methylimidazolium chloroaluminate, [bmim]Cl·.AlCl₃ (molar fraction, N=0.67), ionic liquid has been used in combination with metallic Zn for the reductive coupling of carbonyl compounds to synthesize symmetrical olefins, with the Z‐isomer formed predominantly. The ionic liquid played a dual role of Lewis acid catalyst and solvent.     

Efficient Homogeneous Chemical Modification of Bacterial Cellulose in the Ionic Liquid 1‐N‐Butyl‐3‐methylimidazolium Chloride

Summary: Bacterial cellulose (BC), a unique type of cellulose, with high degree of polymerization of 6 500 could be dissolved easily in the ionic liquid 1‐N‐butyl‐3‐methylimidazolium chloride. For the first time, well‐soluble BC acetates and carbanilates of high degree of substitution (up to a complete modification of all hydroxyl groups) were accessible under homogeneous and mild reaction conditions. Characterization of the new BC derivatives by NMR and FTIR spectroscopy shows an unexpected distribution of the acetyl moieties in the order O‐6 > O‐3 > O‐2.

¹³C NMR spectrum (DMSO‐d₆) of a cellulose acetate with a DS of 2.25 synthesized in 1‐N‐butyl‐3‐methylimidazolium chloride.     

离子液体中一步合成14-芳基-1,6,7,14-四氢二苯并[a, i]吖啶-1,6-二酮衍生物

室温条件下在离子液体[bmim]BF4中合成了14-芳基-1,6,7,14-四氢二苯并[a, i]吖啶-1,6-二酮类衍生物,该方法具有产率高,反应介质可回收使用,反应底物范围广,反应时间短,操作简单等优点。     

Polyoxometalate Ionic Liquids as Self‐Repairing Acid‐Resistant Corrosion Protection

Corrosion is a global problem for any metallic structure or material. Herein we show how metals can easily be protected against acid corrosion using hydrophobic polyoxometalate‐based ionic liquids (POM‐ILs). Copper metal disks were coated with room‐temperature POM‐ILs composed of transition‐metal functionalized Keggin anions [SiW₁₁O₃₉TM(H₂O)]^n? (TM=Cu^II, Fe^III) and quaternary alkylammonium cations (C_nH_{2 n+1})₄N⁺ (n=7–8). The corrosion resistance against acetic acid vapors and simulated “acid rain” was significantly improved compared with commercial ionic liquids or solid polyoxometalate coatings. Mechanical damage to the POM‐IL coating is self‐repaired in less than one minute with full retention of the acid protection properties. The coating can easily be removed and recovered by rinsing with organic solvents.     

Extraction of Cupric Ions with Ionic Liquids Containing Polypyridine‐type Small Molecules or Peripherally Pyridine‐modified Dendrimers

The hydrophobic ionic liquid N‐butyl‐N‐methylpyrrolidinium bis((trifluoromethyl)sulfonyl)amide (BMP‐TFSA IL), which contains a series of flexible ionophores of polypyridine‐type small molecules or two rigid ionophores of peripherally pyridine‐modified PAMAM dendrimers, was used to extract cupric ions from aqueous solutions. The polypyridine‐type ionophores show good selectivity toward cupric ions at pH 2. The selectivity is affected by the spacing between the two amino groups. However, the pyridine‐modified dendrimers showed poor selectivity, although their extraction efficiency still depended on the pH of the aqueous solution. The ionic liquids that contained small molecular ionophores and their dendrimer analogs were reused after acid washing or electrochemical reduction. During acid washing, the nitrogen atoms of the ionophores were protonated to release the cupric ions into the aqueous phase, and the copper atoms were deposited onto the electrode surface during the electrochemical reduction accompanied by the regeneration of the ionophores.     

Crystallographic report: A three‐dimensional coordination polymer: poly‐[µ7‐1,2,4,5‐benzenetetracarboxylato‐bis(N,N‐dimethylformamide)dizinc(II)]

The structure of the title compound, [Zn₂(btc)(DMF)₂]_n (btc = 1,2,4,5‐benzenetetracarboxylate, DMF = N,N‐dimethylformamide), shows that the octahedrally and tetrahedrally coordinated zinc atoms (present in the ratio 1:1) are linked by btc ligands to form a three‐dimensional network comprising cross‐linked channels occupied by coordinated DMF molecules. Copyright © 2004 John Wiley & Sons, Ltd.     

An Efficient and Green One‐pot Synthesis of 12‐Aryl‐8,9,10,12‐tetrahydrobenzo[a]xanthen‐11‐one Derivatives Promoted by Sulfamic Acid in [BMIM]BF4 Ionic Liquid

An efficient and green procedure for the synthesis of novel 12‐aryl‐8,9,10,12‐tetrahydrobenzo[a]xanthen‐11‐one derivatives has been described through one‐pot condensation of 2‐naphthol, arylaldehyde and 5,5‐dimethyl‐cyclohexane‐1,3‐dione in the presence of sulfamic acid (NH₂SO₃H) in ionic liquid 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIM]BF₄). These reactions proceed with good yields under short reaction time. Furthermore, the green catalytic system can be recycled specific times with no decreases in yields and reaction rates.     

A Roadmap to Uranium Ionic Liquids: Anti‐Crystal Engineering

In the search for uranium‐based ionic liquids, tris(N,N‐dialkyldithiocarbamato)uranylates have been synthesized as salts of the 1‐butyl‐3‐methylimidazolium (C₄mim) cation. As dithiocarbamate ligands binding to the UO₂²⁺ unit, tetra‐, penta‐, hexa‐, and heptamethylenedithiocarbamates, N,N‐diethyldithiocarbamate, N‐methyl‐N‐propyldithiocarbamate, N‐ethyl‐N‐propyldithiocarbamate, and N‐methyl‐N‐butyldithiocarbamate have been explored. X‐ray single‐crystal diffraction allowed unambiguous structural characterization of all compounds except N‐methyl‐N‐butyldithiocarbamate, which is obtained as a glassy material only. In addition, powder X‐ray diffraction as well as vibrational and UV/Vis spectroscopy, supported by computational methods, were used to characterize the products. Differential scanning calorimetry was employed to investigate the phase‐transition behavior depending on the N,N‐dialkyldithiocarbamato ligand with the aim to establish structure–property relationships regarding the ionic liquid formation capability. Compounds with the least symmetric N,N‐dialkyldithiocarbamato ligand and hence the least symmetric anions, tris(N‐methyl‐N‐propyldithiocarbamato)uranylate, tris(N‐ethyl‐N‐propyldithiocarbamato)uranylate, and tris(N‐methyl‐N‐butyldithiocarbamato)uranylate, lead to the formation of (room‐temperature) ionic liquids, which confirms that low‐symmetry ions are indeed suitable to suppress crystallization. These materials combine low melting points, stable complex formation, and hydrophobicity and are therefore excellent candidates for nuclear fuel purification and recovery.