Atmospheric photooxidation of isoprene part I: The hydroxyl radical and ground state atomic oxygen reactions

The OH reaction with isoprene is studied. Methyl nitrite photolysis experiments were carried out in an outdoor smog chamber in an attempt to identify as completely as possible OH-isoprene product distribution. Emphasis was placed on identification and quantification of oxygenated products. A Tenax-based cryo-trap thermal desorber used to trap, concentrate, and dry chamber samples for identification on a GC/MS is described. Analysis of the products revealed that O(³P) can form in reaction systems designed to study OH reactions that include high concentrations of NO, and consequently NO₂, hence, this reaction is also examined. The yields of methacrolein and methyl vinyl ketone are determined as 25 ± 3 and 35.5 ± 4%, respectively, with an additional 4 ± 2% as 3-methyl furan, totaling 65 ± 4%. These results, combined with those of previous studies allow 80% of isoprene's products to be explicitly identified, and the general structure of the remaining products to be ascertained. The O(³P) reaction produces 84 ± 8% epoxides, and 8 ± 3% species which result in production of HO₂, and subsequently, OH. A heretofore unidentified product of the O(³P) reaction, 2-methyl 2-butenal, is identified. The rate constant of the NO₂-isoprene reaction is measured.     

Determination of maximum loading capacity of polyamidoamine (PAMAM) dendrimers and evaluation of Cu55 dendrimer‐encapsulated nanoparticles for catalytic activity

Spectrophotometric titrations provide information about the interior of the polyamidoamine (PAMAM) dendrimers, and therefore how nanoparticles are encapsulated. In this work, binding studies were performed to determine maximum loading capacities (N) of hydroxyl terminated G4, G5, and G6 PAMAM dendrimers with Cu²⁺ ions. The values of N found via spectrophotometric titrations were 16.22, 31.86, and 57.36 for G4‐OH, G5‐OH, and G6‐OH, respectively. The determination of loading capacity was also done using Viva spin filtration, and the results were found to be in agreement with those found via spectrophotometric titrations. From the binding isotherm, the values of equilibrium constant (K′) were determined and found to be 0.0488 (G4‐OH), 0.0291 (G5‐OH), and 0.0158 (G6‐OH). Owing to instability of G4‐OH (Cu₁₆), G5‐OH (Cu₃₂), and G6‐OH (Cu₅₇) dendrimer‐encapsulated nanoparticles (DENs) synthesized, G6‐OH (Cu₅₅) DENs of average size 2.6 ± 0.3 nm were prepared and were found to be relatively stable. Thus G6‐OH (Cu₅₅) catalyst was evaluated for the reduction of 4‐nitrophenol and was found to be catalytically active toward reduction of 4‐nitrophenol. Reaction kinetics of 4NP reduction was thoroughly studied in light of the Langmuir‐Hinshelwood kinetic model, and surface rate k, and the adsorption rates K_4NP, and K_BH4 were determined. The reaction was performed at different temperatures, which further expanded the study into determination of thermodynamic (ΔH^‡, ΔS^‡, ΔG^‡, and E_A) parameters.     

Hydrogen Bonding of Fluorinated Saccharides in Solution: F Acting as H‐Bond Acceptor in a Bifurcated H‐Bond of 4‐Fluorinated Levoglucosans

4‐Fluorinated levoglucosans were synthesised to test if OH???F H‐bonds are feasible even when the O???F distance is increased. The fluorinated 1,6‐anhydro‐β‐D ‐glucopyranoses were synthesised from 1,6 : 3,4‐dianhydro‐β‐D ‐galactopyranose ( 8 ). Treatment of 8 with KHF₂ and KF gave 43% of 4‐deoxy‐4‐fluorolevoglucosan ( 9 ), which was transformed into the 3‐O‐protected derivatives 13 by silylation and 15 by silylation, acetylation, and desilylation. 4‐Deoxy‐4‐methyllevoglucosan ( 19 ) and 4‐deoxylevoglucosan ( 21 ) were prepared as reference compounds that can only form a bivalent H‐bond from HO? C(2) to O? C(5). They were synthesised from the ⁱPr₃Si‐protected derivative of 8 . Intramolecular bifurcated H‐bonds from HO? C(2) to F? C(4) and O? C(5) of the 4‐fluorinated levoglucosans in CDCl₃ solution are evidenced by the ¹H‐NMR scalar couplings ^h1J(F,OH) and ³J(H,OH). The OH???F H‐bond over an O???F distance of ca. 3.0 Å is thus formed in apolar solvents, at least when favoured by the simultaneous formation of an OH???O H‐bond.     

A combined theoretical and experimental approach to the unimolecular loss of molecular hydrogen from protonated formaldehyde: Determination of the average internal energy of metastable [CH2OH]+ ions

Ab initio quantum chemical calculations (MP2/4–31G**) were performed for the dihydrogen elimination reaction from protonated formaldehyde. The energy difference between reactants and products and the activation energies were found to be in good agreement with the corresponding experimental quantities. Theoretical rate vs. energy curves were computed for a series of isotopic variants of the reaction using the Rice–Ramsperger–Kassel–Marcus (RRKM) method. The vibrational frequencies used in these calculations were taken from the 4–31G** geometry-optimized transition state and reactant structures. Quantum mechanical tunnelling was introduced to explain the existence of metastable CH₂OH ions, and a negative kinetic shift of about 0.1 eV was found. The intramolecular kinetic isotope effect for loss of HH/HD and DH/DD was calculated and compared with the experimental data. The result is consistent with the assumption that the average internal energy of metastable [CH₂OH]⁺ ions is very close to the critical energy for H₂ loss.     

The hydroxyl radical reaction rate constant and atmospheric transformation products of 2-butanol and 2-pentanol

The relative rate technique has been used to measure the hydroxyl radical (OH) reaction rate constant of +2-butanol (2BU, CH₃CH₂CH(OH)CH₃) and 2-pentanol (2PE, CH₃CH₂CH₂CH(OH)CH₃). 2BU and 2PE react with OH yielding bimolecular rate constants of (8.1±2.0)×10⁻¹² cm³molecule⁻¹s⁻¹ and (11.9±3.0)×10⁻¹² cm³molecule⁻¹s⁻¹, respectively, at 297±3 K and 1 atmosphere total pressure. Both 2BU and 2PE OH rate constants reported here are in agreement with previously reported values [1–4]. In order to more clearly define these alcohols' atmospheric reaction mechanisms, an investigation into the OH+alcohol reaction products was also conducted. The OH+2BU reaction products and yields observed were: methyl ethyl ketone (MEK, (60±2)%, CH₃CH₂C((DOUBLEBOND)O)CH₃) and acetaldehyde ((29±4)% HC((DOUBLEBOND)O)CH₃). The OH+2PE reaction products and yields observed were: 2-pentanone (2PO, (41±4)%, CH₃C((DOUBLEBOND)O)CH₂CH₂CH₃), propionaldehyde ((14±2)% HC((DOUBLEBOND)O)CH₂CH₃), and acetaldehyde ((40±4)%, HC((DOUBLEBOND)O)CH₃). The alcohols' reaction mechanisms are discussed in light of current understanding of oxygenated hydrocarbon atmospheric chemistry. Labeled (¹⁸O) 2BU/OH reactions were conducted to investigate 2BU's atmospheric transformation mechanism details. The findings reported here can be related to other structurally similar alcohols and may impact regulatory tools such as ground level ozone-forming potential calculations (incremental reactivity) [5]. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 745–752, 1998     

Thermodynamic Studies on the Complexation Reactions of Copper(II) Complex of o2n2-Donor Macrocycle with Halide and Pseudohalide Ions

Complexation reactions of 5,6,7,8,9,10,16,17-octahydrodibenzo[e, m][1, 4]dioxa-[8, 11]diazacyclotetradecine-copper(II) complex with halide and pseudohalide ions have been studied at 25.0° in three water-methanol mixed solvents by spectro-photometric method. It is found that the equilibrium constants increases in the order of 50 vol.% CH₃OH<75 vol.% CH₃OH<95 vol.% CH₃OH for solvents and I-<Br^?<CI^?<SCN^?, N^?₃ for anions.     

Aminyloxide (nitroxide)—XXIV: Empirische ermittlung der spindichteverteilung in aminyloxiden

¹⁷O-Labelled aminyloxides 1–8 (dialkyl-, alkylaryl-, diaryl-, acylaminyloxides and amidinyloxides) have been prepared by various methods. The ESR spectra of 1a and 4 have been measured in various solvents, showing a very good correlation between a^N respectively a^O and the E_T-values of solvents. From the solvent-dependence of the coupling constants of 1a Q-values have been evaluated for the simplified equation aⁱ = Q_iiⁱ × pⁱ (Q_NN^N = 33.1 G; Q_oo^o = 35.3 G). These values were used to calculate the spin density ?^N and ?^o of the aminyloxides 1–8. The Q-values are shown to be reasonable by summation of the spin density of all positions for the radicals 4–7. which gives one with only small deviations. In most of these radicals in which the unpaired electron is delocalized into the conjugated π-system ?^N is reduced significantly, as compared to dialkyl-ammyloxides, whereas ?⁰ is only lowered to a small extent.     

A study on hydrolytic polymerization of lanthanide ions

Experimental data of hydrolytic polymerization of lanthanide ions in aqueous solution were treated by graphic method, computer fitting and pq analysis, species present were ascertained and hydrolysis constants obtained. Ln (OH)²⁺ and Ln₂ (OH)₂⁴⁺ predominated in the species of all hydrolysis products. When the first and the second hydrolysis constants were plotted against radii and effective nuclear charge of lanthanide ions, the curves obtained conformed with the “three-division groups” rule. Correlation between hydrolysis constants of Ln₂ (OH)₂⁴⁺ and other hydrolysis constants is linear. Using the above empirical correlations we calculated hydrolysis constants of all lanthanide ions and obtained satisfactory results which showed good regularity for hydrolysis of lanthanide ions and thus systematized all data of the reaction.     

Catalytic Cyclophanes. Part VIII. Cytochrome P-450 activity of a porphyrin-bridged cyclophane

Following a known synthetic procedure, the porphyrin-cyclophane 1 having a porphyrin attached by two straps to an apolar cyclophane binding site was prepared. Upon metallation, the Zn^II and Fe^III derivatives 2 and 3 , respectively, were obtained in good yields. Treatment of 3 with base yielded the μ-oxo dimer 4 in which the two oxo-bridged porphyrins moieties are both capped by cyclophane binding sites. All compounds 1–4 are freely soluble in protic solvents such as MeOH and CF₃CH₂OH, and the Fe^III derivatives 3 and 4 are active cytochrome P-450 mimics in these protic environments. Strong inclusion complexation of polycyclic aromatic hydrocarbons by 1 and 3 in alcoholic solvents was observed and quantified by ¹H-NMR and UV/VIS titrations. Acenaphthylene binds in an ‘equatorial’ orientation which locates its reactive 1,2-double bond near the porphyrin center, whereas phenanthrene binds ‘axially’ with the reactive 9,10-double bond oriented away from the porphyrin. The reduction potential of 3 was not significantly altered by substrate binding. In the unbound form, the Fe^III center in porphyrin 3 was found by ESR and ¹H-NMR to prefer a high-spin state (S = 5.2). In CF₃CH₂OH, using iodosylbenzene as O-transfer agent, the Fe^III derivative 3 catalyzed the oxidation of acenaphthylene to acenaphthen-1-one ( 14 ). Phenanthrene inhibited the reaction, possibly as a result of strong but nonproductive binding. Under similar conditions, isotetralin ( 18 ) was aromatized with high turnover to 1,4-dihydronaphthalene. The μ-oxo dimer 4 also showed high activity in the oxidation of acenaphthylen in MeOH, a result which provides strong evidence for efficent supramolecular catalysis. Due to as yet unknown reaction channels leading to polymeric products, poor mass balances were generally obtained in the oxidations effected in MeOH and CF₃CH₂OH in the presence of PhIO.     

Measurement of the Hydrolysis of Tin Tetraacetate by Proton and Carbon-13 NMR Spectroscopy

Solid-state ^l3C CP/MAS spectral analysis of the hydrolysis products of Sn(OAc)₄ allowed the hydrolysis intermediates, Sn(OH)(OAc)₃, Sn(OH)₂(OAc)₂ and Sn(OH)₃(OAc), to be identified. The results show that the hydrolysis consists of three steps; the first and second steps are consecutive reactions and the third is reversible. Intermolecular exchange between hydrolysis products (i.e. Sn(OAc)⁴, Sn(OH)(OAc)₂, Sn(OH)₂(OAc)₂ and Sn(OH)₃(OAc),) and acetic acid was observed from the measurement of ¹H and ¹³C solution spectra at varied temperatures in CD₂Cl₂ with ΔG^?₃₄₈ 50.5 kJ mol^?1.     

Photochemistry of aqueous [W(CN)8]4−

Aqueous [W(CN)₈]^4? undergoes photoaquation when irradiated at ～ 365 nm with pH independent quantum yield. The yield for aquoheptacyanotungstate (IV) ion production is 0.8 at 0.5°C. If added alkali is present a wide variety of products [W(CN)₇(OH)]^4?, [WO₂(CN)₄]^4?, [WO(OH)(CN)₄]^3? [W(OH)₂(CN)₄]^2? are formed.     

Lifetimes of Hg(3P0) complexes with methanol,ammonia, and water

Lifetimes of Hg(³P₀) complexes were determined by simultaneous observation of Hg(³P₀) optical absorption and complex emission, using a modulation technique and phase sensitive detection. The lifetimes of the mercury complexes with methanol, (1.4 ± 0.7) × 10^-8 s, and water, ? 8 × 10^-8 s, were found to be much shorter than reported in earlier work. For the ammonia complex, however a lifetime was measured which is in good agreement with previous determinations. Reasons for the large errors in earlier work where the methanol and water complex lifetimes were determined from complex emission data alone are discussed, and these data are reinterpreted. In the reaction rate of Hg(³P₀) with methanol no detectable contribution from the termolecular process Hg(³P₀) + 2CH₃OH → (Hg·CH₃OH)^* + CH₃OH could be observed.     

离子液体中酮肟O-烷基化反应的研究

以[Bmim]PF6,[Bmim]BF4,[Bmim]OH为介质,以NaOH为缚酸剂,由酮肟与卤烷、硫酸酯等烷基化剂在20～40℃反应1～2h,以52%～94%的收率制备了酮肟醚衍生物,产物结构经1HNMR,GC-MS表征.结果表明,该方法简便易操作,所用离子液体对环境友好,并可循环使用.     

Mg(OH)Cl/KI as a Highly Active Heterogeneous Catalyst for the Synthesis of Cyclic Carbonates from CO2 and Epoxides under Solvent‐Free Conditions

The combination of magnesium hydroxyl chloride [Mg(OH)Cl] with KI could efficiently catalyze the coupling reaction of carbon dioxide with epoxides to give the corresponding cyclic carbonates in good to excellent yields (75.0% –98.3%) and high selectivity (99.6%) in the absence of organic solvents. The heterogeneous catalyst Mg(OH)Cl/KI could be reused at least six times almost without loss of the catalytic activity. The influence of some key factors (such as molar ratio of Mg(OH)Cl to KI, temperature, reaction time and CO₂ pressure) on the reaction was also discussed.     

Thermal analysis of corrosion products formed on carbon steel in ammonium chloride solution

The influence of different ions NO₃ ^? and SO₄ ^2? on the carbon steel corrosion in ammonium chloride was investigated using mass loss measurements and potentiodynamic polarization. Corrosion products were analyzed using X-ray photoelectron spectroscopy (XPS) and simultaneous thermal and differential scanning calorimetry (TG/DSC). XPS analysis shows that the main product of corrosion is a non-stoichiometric Fe³⁺ oxyhydroxide, consisting of a mixture of FeO(OH) and FeO(OH) containing inclusions of these anions, species such as Fe³⁺O(OH,Cl^?); Fe³⁺O(OH,SO₄ ^2?); and Fe³⁺O(OH,NO₃ ^?). TG/DSC confirms the decomposition of the rusty products formed by chemical corrosion, compounds like Fe³⁺ oxyhydroxides, with β-FeOOH as the major phase, crystal structure of which may contain Cl^?, NO₃ ^?, and SO₄ ^2?—e.g., akaganeite [Fe³⁺O(OH,A)].     

Studies on zero point of charge and intrinsic ionization constant of Zn−Mg−Al hydrotalcite-like compounds

The zero point of charge (ZPC) and the intrinsic ionization constant ( % MathType!MTEF!2!1!+- % feaaeaart1ev0aaatCvAUfKttLearuavTnhis1MBaeXatLxBI9gBae % bbnrfifHhDYfgasaacH8srps0lbbf9q8WrFfeuY-Hhbbf9v8qqaqFr % 0xc9pk0xbba9q8WqFfea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8 % frFve9Fve9Ff0dmeaabaqaciGacaGaaeqabaWaaeaadaaakeaacqWG % lbWsdaqhaaWcbaGaeeyyaegabaGaeeyAaKMaeeOBa4MaeeiDaqhaaa % aa!304C! K_a^int K_{\rm a}^{{\rm int}} ) of Zn-Mg-Al hydrotalcite-like compounds (HTlc) with the general formula [(Zn,Mg) _{1- x} Al _x (OH) ₂] ^{x +} [(OH,Cl) _x] ^{x -} were determined by potentiometric titration (PT). The variation of the ZPC and % MathType!MTEF!2!1!+- % feaaeaart1ev0aaatCvAUfKttLearuavTnhis1MBaeXatLxBI9gBae % bbnrfifHhDYfgasaacH8srps0lbbf9q8WrFfeuY-Hhbbf9v8qqaqFr % 0xc9pk0xbba9q8WqFfea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8 % frFve9Fve9Ff0dmeaabaqaciGacaGaaeqabaWaaeaadaaakeaacqWG % lbWsdaqhaaWcbaGaeeyyaegabaGaeeyAaKMaeeOBa4MaeeiDaqhaaa % aa!304C! K_a^int K_{\rm a}^{{\rm int}} with xwas investigated. For the colloidal particles possessing permanent charges, the ZPC determined by the PT method is the zero point of net charge (ZPNC). The ZPNC ( pH _ZPNC) values were 9.63 {[Zn _0.27Mg _0.36Al _0.37 (OH) ₂]Cl _0.13 (OH) _0.24 }, 9.68 {[Zn _0.13Mg _0.58Al _0.29 (OH) ₂]Cl _0.12 (OH) _0.17 }, 9.67 {[Zn _0.17Mg _0.54Al _0.29 (OH) ₂]Cl _0.16 (OH) _0.12 },10.16 {[Zn _0.08Mg _0.67Al _0.25 (OH) ₂]Cl _0.17 (OH) _0.08}, 10.33 {[Zn _0.16Mg _0.60Al _0.24 (OH) ₂] Cl _0.16 (OH) _0.08} and 10.60 {[Zn _0.19Mg _0.60Al _0.21 (OH) ₂] Cl _0.15 (OH) _0.06}; the intrinsic ionization constants % MathType!MTEF!2!1!+- % feaaeaart1ev0aaatCvAUfKttLearuavTnhis1MBaeXatLxBI9gBae % bbnrfifHhDYfgasaacH8srps0lbbf9q8WrFfeuY-Hhbbf9v8qqaqFr % 0xc9pk0xbba9q8WqFfea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8 % frFve9Fve9Ff0dmeaabaqaciGacaGaaeqabaWaaeaadaaakeaacqqG % WbaCcqWGlbWsdaqhaaWcbaGaeeyyaeMaeeOmaidabaGaeeyAaKMaee % OBa4MaeeiDaqhaaaaa!329E! pK_a2^int {\rm p}K_{{\rm a2}}^{{\rm int}} of the same HTlc samples were 10.31, 10.44, 10.44, 11.02, 11.19 and 11.54. With decreasing x, ZPNC and % MathType!MTEF!2!1!+- % feaaeaart1ev0aaatCvAUfKttLearuavTnhis1MBaeXatLxBI9gBae % bbnrfifHhDYfgasaacH8srps0lbbf9q8WrFfeuY-Hhbbf9v8qqaqFr % 0xc9pk0xbba9q8WqFfea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8 % frFve9Fve9Ff0dmeaabaqaciGacaGaaeqabaWaaeaadaaakeaacqWG % lbWsdaqhaaWcbaGaeeyyaeMaeeOmaidabaGaeeyAaKMaeeOBa4Maee % iDaqhaaaaa!3137! K_a2^int K_{{\rm a2}}^{{\rm int}} of HTlc increased, and the acidity of the HTlc samples decreased.     

Analysis of Aluminum-Brass Corrosion Products in Sea Water and in Chloride Solutions

Abstract

A separation and chemical analysis method has been developed of corrosion products forming on aluminum brass surfaces immersed in sodium sulfate solutions at pH= 7.25 (simulating river water) and in sea water at pH= 8.2. This method is based upon a selective solubilization of various oxidation compounds with the aid of proper solvents (i.e. dissolving the metal matrix only to a negligible extent).

These analyses can be performed on oxidation films of more than 100 Å thickness. The following solvents were used:

1) Methanol for solubilization of Na⁺, Cu⁺⁺ and Zn⁺⁺ chlorides and sulfates;

2) Glycine to solubilize bivalent metal compounds:Cu and Zn oxydes oxysulfates, oxycarbonates, oxychlorides of Cu and Zn;

3) NH₄ OH to solubilize Cu⁺⁺ and aluminum compounds.

A fair agreement was observed between the formulae derived by stoichiometric calculation applied to chemical analyses and the values obtained by X-ray analysis.

Agreement was satisfactory for all compounds, except aluminum, determined by chemical analysis and identified by X-rays only in very thick oxidation films (≥ 10³ Å). The role of chemical analysis is therefore determinant to finalize the formation mechanism of aluminum brass passivation films.     

Highly Stable Copper(I)–Thiacalix[4]arene-Based Frameworks for Highly Efficient Catalysis of Click Reactions in Water

Environmentally friendly metal–organic frameworks (MOFs) have gained considerable attention for their potential use as heterogeneous catalysts. Herein, two Cu^I-based MOFs, namely, [Cu₄Cl₄L] ⋅ CH₃OH ⋅ 1.5 H₂O ( 1-Cl ) and [Cu₄Br₄L] ⋅ DMF ⋅ 0.5 H₂O ( 1-Br ), were assembled with new functionalized thiacalix[4]arenes (L) and halogen anions X⁻ (X=Cl and Br) under solvothermal conditions. Remarkably, catalysts 1-Cl and 1-Br exhibit great stability in aqueous solutions over a wide pH range. Significantly, MOFs 1-Cl and 1-Br , as recycled heterogeneous catalysts, are capable of highly efficient catalysis for click reactions in water. The MOF structures, especially the exposed active Cu^I sites and 1D channels, play a key role in the improved catalytic activities. In particular, their catalytic activities in water are greatly superior to those in organic solvents or even in mixed solvents. This work proposes an attractive route for the design and self-assembly of environmentally friendly MOFs with high catalytic activity and reusability in water.     

Kinetics and mechanism of formyl- and acetylferrocene oxidation with molecular oxygen in organic solvents

Kinetic laws and the products of autoxidation of formyl- and acetylferrocene in organic solvents in the presence of strong and weak Br?nsted acids were investigated. The special feature of the studied reactions is the extreme dependence of the metal complex oxidation rate on the strong acid concentration. This is explained by protonation of the metal complex at high concentrations of the acids leading to the formation of stable to oxidation ??-ferrocenylcarbenium complexes C₅H₅FeC₅H₄C⁺(OH)R.     

Combination of three analytical techniques for speciation of Al in environmental samples

An analytical scheme is proposed which combines three speciation techniques for determination of particular Al species in soil extracts and percolating waters. A cation-exchange fast protein liquid chromatography — inductively coupled plasma atomic emission spectrometry (FPLC-ICP-AES) procedure, a microcolumn chelating ion-exchange chromatography- atomic absorption spectrometry (MCC-ETAAS) technique and the 8-hydroxyquinoline spectrophotometric method (8HQ-spectrophotometry) were employed. The FPLC-ICP-AES procedure offers determination of Al³⁺ (retention time 4.5 min) and Al(OH)²⁺ species (retention time 4.0 min) which are separated from Al(OH)⁺ ₂ (retention time 1.5min). AlF²⁺ coelutes with Al(OH)²⁺ species, while Al(SO₄)⁺, AlF⁺ ₂ and negatively charged Al organic complexes coelute with Al(OH)⁺ ₂ species. The MCC-ETAAS technique enables determination of the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphate- and fluoro-Al complexes. Employing the 8HQ-spectrophotometry the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphato- and most of the labile organic Al species are determined. The sensitivities of these selected techniques were adequate for speciation of Al in the samples analyzed. On the basis of the specific selectivity of a particular technique various groups of Al species may be determined. Thus, the comparison of analytical data from complementary procedures provides more comprehensive information on Al species present in soil extracts and percolating waters.