Effect of substrate wettability in liquid dielectrophoresis (LDEP) based droplet generation: theoretical analysis and experimental confirmation

The generation of droplets for biological reactions at the microscale can be achieved by many techniques, among which the so-called liquid dielectrophoresis technique (LDEP). This is not a new process, but the parameters influencing actuation voltage still need further insight: size and geometry (electrodes width and gap, dielectric thickness), materials (dielectric constant), liquids (surface tension, dielectric constant, conductivity), working conditions (voltage, frequency) and substrate wettability (contact angle). This large experimental space is firstly reduced using non dimensional numbers and then studied in a systematic way thanks to the design of experiments. The contact angle influence is explained thanks to a new analytical model. To summarize, this paper recalls analytical models used to predict the voltage threshold required to develop a liquid rivulet from a mother drop, taking the contact angle into account and providing a large set of experimental results.     

Principles of droplet electrohydrodynamics for lab-on-a-chip

Electrically controlled droplet-based labs-on-a-chip operate under the principles of electro-capillarity and dielectrophoresis. The microfluidic mechanics of manipulating electrified droplets are complex and not entirely understood. In this article, we analyse these operating principles, especially electrowetting on dielectric (a form of electro-capillarity) and dielectrophoresis, under a unified framework of droplet electrohydrodynamics. We differentiate them by their electric origins and their energy transduction mechanisms. Our study shows that both electrowetting on dielectric and dielectrophoresis are effective for droplet generation and manipulation. In addition, our study demonstrates: (1) the presence of a wetting contribution to dielectrophoresis; and (2) contact angle reduction is merely an observable consequence of, not a condition for, the occurrence of electrowetting on dielectric. Simulations are used extensively in this article to illustrate device operation, to expose underlying physics, and to validate our conclusions. Simulations of electrically driven droplet generation, droplet translocation, droplet fusion, and droplet fission are presented.     

Experimental study of dielectrophoresis and liquid dielectrophoresis mechanisms for particle capture in a droplet

This work presents a microfluidic system that can transport, concentrate, and capture particles in a controllable droplet. Dielectrophoresis (DEP), a phenomenon in which a force is exerted on a dielectric particle when it is subjected to a non-uniform electric field, is used to manipulate particles. Liquid dielectrophoresis (LDEP), a phenomenon in which a liquid moves toward regions of high electric field strength under a non-uniform electric field, is used to manipulate the fluid. In this study, a mechanism of droplet creation presented in a previous work that uses DEP and LDEP is improved. A driving electrode with a DEP gap is used to prevent beads from getting stuck at the interface between air and liquid, which is actuated with an AC signal of 200 V(pp) at a frequency of 100 kHz. DEP theory is used to calculate the DEP force in the liquid, and LDEP theory is used to analyze the influence of the DEP gap. The increment of the actuation voltage due to the electrode with a DEP gap is calculated. A set of microwell electrodes is used to capture a bead using DEP force, which is actuated with an AC signal of 20 V(pp) at a frequency of 5 MHz. A simulation is carried out to investigate the dimensions of the DEP gap and microwell electrodes. Experiments are performed to demonstrate the creation of a 100-nL droplet and the capture of individual 10-μm polystyrene latex beads in the droplet.     

Droplet-based chemistry on a programmable micro-chip

We describe the manipulation of aqueous droplets in an immiscible, low-permittivity suspending medium. Such droplets may serve as carriers for not only air- and water-borne samples, contaminants, chemical reagents, viral and gene products, and cells, but also the reagents to process and characterise these samples. We present proofs-of-concept for droplet manipulation through dielectrophoresis by: (1). moving droplets on a two-dimensional array of electrodes, (2). achieving dielectrically-activated droplet injection, (3). fusing and reacting droplets, and (4). conducting a basic biological assay through a combination of these steps. A long-term goal of this research is to provide a platform fluidic processor technology that can form the core of versatile, automated, micro-scale devices to perform chemical and biological assays at or near the point of care, which will increase the availability of modern medicine to people who do not have ready access to modern medical institutions, and decrease the cost and delays associated with that lack of access.     

Integrated circuit/microfluidic chip to programmably trap and move cells and droplets with dielectrophoresis

We present an integrated circuit/microfluidic chip that traps and moves individual living biological cells and chemical droplets along programmable paths using dielectrophoresis (DEP). Our chip combines the biocompatibility of microfluidics with the programmability and complexity of integrated circuits (ICs). The chip is capable of simultaneously and independently controlling the location of thousands of dielectric objects, such as cells and chemical droplets. The chip consists of an array of 128 x 256 pixels, 11 x 11 microm(2) in size, controlled by built-in SRAM memory; each pixel can be energized by a radio frequency (RF) voltage of up to 5 V(pp). The IC was built in a commercial foundry and the microfluidic chamber was fabricated on its top surface at Harvard. Using this hybrid chip, we have moved yeast and mammalian cells through a microfluidic chamber at speeds up to 30 microm sec(-1). Thousands of cells can be individually trapped and simultaneously positioned in controlled patterns. The chip can trap and move pL droplets of water in oil, split one droplet into two, and mix two droplets into one. Our IC/microfluidic chip provides a versatile platform to trap and move large numbers of cells and fluid droplets individually for lab-on-a-chip applications.     

Electrical actuation of dielectric droplets by negative liquid dielectrophoresis

This paper presents an electrical actuation scheme of dielectric droplet by negative liquid dielectrophoresis. A general model of lumped parameter electromechanics for evaluating the electromechanical force acting on the droplets is established. The model reveals the influence of actuation voltage, device geometry, and dielectric parameter on the actuation force for both conductive and dielectric medium. Using this model, we compare the actuation forces for four liquid combinations in the parallel-plate geometry and predict the low voltage actuation of dielectric droplets by negative dielectrophoresis. Parallel experimental results demonstrate such electric actuation of dielectric droplets, including droplet transport, splitting, merging, and dispending. All these dielectric droplet manipulations are achieved at voltages < 100 V_rms. The frequency dependence of droplet actuation velocity in aqueous solution is discussed and the existence of surfactant molecules is believed to play an important role by realigning with the AC electric field. Finally, we present coplanar manipulation of oil and water droplets and formation of oil-in-water emulsion droplet by applying the same low voltage.     

Development of Microdroplet Generation Method for Organic Solvents Used in Chemical Synthesis

Recently, chemical operations with microfluidic devices, especially droplet-based operations, have attracted considerable attention because they can provide an isolated small-volume reaction field. However, analysis of these operations has been limited mostly to aqueous-phase reactions in water droplets due to device material restrictions. In this study, we have successfully demonstrated droplet formation of five common organic solvents frequently used in chemical synthesis by using a simple silicon/glass-based microfluidic device. When an immiscible liquid with surfactant was used as the continuous phase, the organic solvent formed droplets similar to water-in-oil droplets in the device. In contrast to conventional microfluidic devices composed of resins, which are susceptible to swelling in organic solvents, the developed microfluidic device did not undergo swelling owing to the high chemical resistance of the constituent materials. Therefore, the device has potential applications for various chemical reactions involving organic solvents. Furthermore, this droplet generation device enabled control of droplet size by adjusting the liquid flow rate. The droplet generation method proposed in this work will contribute to the study of organic reactions in microdroplets and will be useful for evaluating scaling effects in various chemical reactions.     

微流控芯片液滴生成与检测技术研究进展

微流控芯片液滴技术是一种操控微小体积液体的新技术,既可实现高通量微观样本的生成及控制,也可进行独立液滴的操作.分散的微液滴单元可作为理想的微反应器,在生物医药中的药物筛选、材料筛选和高附加值微颗粒材料合成领域展现出巨大的应用潜力.液滴微流控芯片是利用流体剪切力的改变,使互不相溶的两相流体在其界面处生成稳定、有序的液滴,...     

Photo-actuation of liquids for light-driven microfluidics: state of the art and perspectives

Using light to control liquid motion is a new paradigm for the actuation of microfluidic systems. We review here the different principles and strategies to induce or control liquid motion using light, which includes the use of radiation pressure, optical tweezers, light-induced wettability gradients, the thermocapillary effect, photosensitive surfactants, the chromocapillary effect, optoelectrowetting, photocontrolled electroosmotic flows and optical dielectrophoresis. We analyze the performance of these approaches to control using light many kinds of microfluidic operations involving discrete pL- to μL-sized droplets (generation, driving, mixing, reaction, sorting) or fluid flows in microchannels (valve operation, injection, pumping, flow rate control). We show that a complete toolbox is now available to control microfluidic systems by light. We finally discuss the perspectives of digital optofluidics as well as microfluidics based on all optical fluidic chips and optically reconfigurable devices.     

The intertwined physics of active chemical reactions and phase separation

Phase separation is the thermodynamic process that explains how droplets form in multicomponent fluids. These droplets can provide controlled compartments to localize chemical reactions, and reactions can also affect the droplets' dynamics. This review focuses on the tight interplay between phase separation and chemical reactions, which originates from thermodynamic constraints. In particular, simple mass action kinetics cannot describe chemical reactions since phase separation requires non-ideal fluids. Instead, thermodynamics implies that passive chemical reactions reduce the complexity of phase diagrams and provide only limited control over the system's behavior. However, driven chemical reactions, which use external energy input to create spatial fluxes, can circumvent thermodynamic constraints. Such active systems can suppress typical droplet coarsening, control droplet size, and localize droplets. This review provides an extensible framework for describing active chemical reactions in phase separating systems, which forms a basis for improving control in technical applications and understanding self-organized structures in biological cells.     

Formation of artificial lipid bilayers using droplet dielectrophoresis

We describe the formation of artificial bilayer lipid membranes (BLMs) by the controlled, electrical manipulation of aqueous droplets immersed in a lipid-alkane solution. Droplet movement was generated using dielectrophoresis on planar microelectrodes covered in a thin insulator. Droplets, surrounded by lipid monolayers, were brought into contact and spontaneously formed a BLM. The method produced BLMs suitable for single-channel recording of membrane protein activity and the technique can be extended to create programmable BLM arrays and networks.     

Digital microfluidics and delivery of molecular payloads with magnetic porous silicon chaperones

Digital microfluidics involves the manipulation of molecules and materials in discrete packages. This paper reviews our work using amphiphilic magnetic microparticles constructed from porous silicon. An individual porous particle can be used to carry a nanomole or smaller quantities of a reagent, and assemblies of the particles can encapsulate and transport microliter droplets of liquid containing inorganic, organic, or biological molecules. The tracking and identification of each particle can be accomplished with spectral labels that are encoded into the particles during their synthesis. When used to chaperone liquid droplets, the labels can identify the separate droplets prior to mixing and also the combined droplets after mixing. Magnetic iron oxide nanoparticles encapsulated in the porous matrix allow the manipulation of the particles or whole droplet assemblies with a magnetic field, and they also allow heating of the particle's payload by means of an externally applied RF field. Examples of organic, inorganic, and biomolecular addition reactions, catalytic reactions, and thermolysis reactions are described.     

Timing controllable electrofusion device for aqueous droplet-based microreactors

This paper describes an electrofusion device for controlling the precise moment of fusion between droplets by applying an electric field. This device allows (i) accurate determination of the start of chemical/biological reactions, (ii) minimum contact of reactants with channel walls--eliminating surface absorption problems, (iii) easy fabrication and (iv) continuous observation of initiated reaction. We demonstrated the fusion of beta-galactosidase and fluorescein di-beta-D-galactopyranoside (FDG) droplets, and observed the enzymatic reaction using fluorescence microscopy. In addition, sequential fusion of pico-litre droplets was also accomplished.     

Dielectrophoresis-based programmable fluidic processors

Droplet-based programmable processors promise to offer solutions to a wide range of applications in which chemical and biological analysis and/or small-scale synthesis are required, suggesting they will become the microfluidic equivalents of microprocessors by offering off-the-shelf solutions for almost any fluid based analysis or small scale synthesis problem. A general purpose droplet processor should be able to manipulate droplets of different compositions (including those that are electrically conductive or insulating and those of polar or non-polar nature), to control reagent titrations accurately, and to remain free of contamination and carry over on its reaction surfaces. In this article we discuss the application of dielectrophoresis to droplet based processors and demonstrate that it can provide the means for accurately titrating, moving and mixing polar or non-polar droplets whether they are electrically conductive or not. DEP does not require contact with control surfaces and several strategies for minimizing surface contact are presented. As an example of a DEP actuated general purpose droplet processor, we show an embodiment based on a scaleable CMOS architecture that uses DEP manipulation on a 32 x 32 electrode array having built-in control and switching circuitry. Lastly, we demonstrate the concept of a general-purpose programming environment that facilitates droplet software development for any type of droplet processor.     

High molar mass polymers by cationic polymerisation in emulsion and miniemulsion

The generation of poly(p-methoxystyrene) with a molar mass of several thousand g mol(-1) by cationic polymerisation in emulsion, is described here for the first time. Such a striking result was achieved by carrying out the polymerisation inside monomer droplets, thus preventing fast transfer reactions with water.     

Alternating droplet generation and controlled dynamic droplet fusion in microfluidic device for CdS nanoparticle synthesis

A multifunctional and high-efficiency microfluidic device for droplet generation and fusion is presented. Through unique design of the micro-channels, the device is able to alternately generate droplets, generating droplet ratios ranging from 1 ratio 5 to 5 ratio 1, and fuse droplets, enabling precise chemical reactions in several picoliters on a single chip. The controlled fusion is managed by passive control based on the channel geometry and liquid phase flow. The synthesis of CdS nanoparticles utilizing each fused droplet as a microreactor for rapid and efficient mixing of reagents is demonstrated in this paper. Following alternating droplet generation, the channel geometry allows the exclusive fusion of alternate droplets with concomitant rapid mixing and produces supersaturated solution of Cd2+ and S2- ions to form CdS nanoparticles in each fused droplet. The spectroscopic properties of the CdS nanoparticles produced by this method are compared with CdS prepared by bulk mixing.     

Dielectrophoretic cell trapping for improved surface plasmon resonance imaging sensing

The performance of conventional surface plasmon resonance (SPR) biosensors can be limited by the diffusion of the target analyte to the sensor surface. This work presents an SPR biosensor that incorporates an active mass‐transport mechanism based on dielectrophoresis and electroosmotic flow to enhance analyte transport to the sensor surface and reduce the time required for detection. Both these phenomena rely on the generation of AC electric fields that can be tailored by shaping the electrodes that also serve as the SPR sensing areas. Numerical simulations of electric field distribution and microparticle trajectories were performed to choose an optimal electrode design. The proposed design improves on previous work combining SPR with DEP by using face‐to‐face electrodes, rather than a planar interdigitated design. Two different top‐bottom electrode designs were experimentally tested to concentrate firstly latex beads and secondly biological cells onto the SPR sensing area. SPR measurements were then performed by varying the target concentrations. The electrohydrodynamic flow enabled efficient concentration of small objects (3 μm beads, yeasts) onto the SPR sensing area, which resulted in an order of magnitude increased SPR response. Negative dielectrophoresis was also used to concentrate HEK293 cells onto the metal electrodes surrounded by insulating areas, where the SPR response was improved by one order of magnitude.     

Lateral separation of colloids or cells by dielectrophoresis augmented by AC electroosmosis

Colloidal particles and biological cells are patterned and separated laterally adjacent to a micropatterned electrode array by applying AC electric fields that are principally oriented normally to the electrode array. This is demonstrated for yeast cells, red blood cells, and colloidal polystyrene particles of different sizes and zeta-potentials. The separation mechanism is observed experimentally to depend on the applied field frequency and voltage. At high frequencies, particles position themselves in a manner that is consistent with dielectrophoresis, while at low frequencies, the positioning is explained in terms of a strong coupling between gravity, the vertical component of the dielectrophoretic force, and the Stokes drag on particles induced by AC electroosmotic flow. Compared to high frequency dielectrophoretic separations, the low frequency separations are faster and require lower applied voltages. Furthermore, the AC electroosmosis coupling with dielectrophoresis may enable cell separations that are not feasible based on dielectrophoresis alone.     

Single-molecule emulsion PCR in microfluidic droplets

The application of microfluidic droplet PCR for single-molecule amplification and analysis has recently been extensively studied. Microfluidic droplet technology has the advantages of compartmentalizing reactions into discrete volumes, performing highly parallel reactions in monodisperse droplets, reducing cross-contamination between droplets, eliminating PCR bias and nonspecific amplification, as well as enabling fast amplification with rapid thermocycling. Here, we have reviewed the important technical breakthroughs of microfluidic droplet PCR in the past five years and their applications to single-molecule amplification and analysis, such as high-throughput screening, next generation DNA sequencing, and quantitative detection of rare mutations. Although the utilization of microfluidic droplet single-molecule PCR is still in the early stages, its great potential has already been demonstrated and will provide novel solutions to today's biomedical engineering challenges in single-molecule amplification and analysis.     

Simulations of a dielectrophoretic membrane filtration process for removal of water droplets from water-in-oil emulsions

A novel separation technique based on simultaneous application of AC dielectrophoresis and preferential transport through a semipermeable hydrophilic membrane is proposed for separation of small amounts of emulsified water droplets from a water-in-oil emulsion. Embedding an array of parallel microelectrodes on a membrane matrix, followed by application of an AC potential to these electrodes, can result in capturing the water droplets onto the membranes from the emulsion during a crossflow filtration process. The present paper describes the theoretical principles underlying such a process, and describes a simple mathematical framework based on trajectory analysis for assessing the separation efficiency of such a technique. The results indicate that superimposition of an AC dielectrophoretic field can significantly enhance the preferential transport of the emulsified water through the membrane in a crossflow filtration device. This can lead to a highly efficient continuous separation process for dilute emulsions.