基于多通道滤波技术的散斑条纹图正则化方法

在光测力学中,条纹图正则化是进一步提取条纹位相信息的重要基础。对于散斑条纹图来说,正则化的过程还需能够有效地抑制散斑噪声。本文提出一种基于多通道滤波技术的散斑条纹图正则化方法。通过使用多个Gabor滤波通道对散斑条纹图进行滤波,并且引入与条纹对比度有关的权重因子把各个滤波通道的滤波结果叠加起来,最终得到滤除了散斑噪声的正则化条纹图。数值模拟和实验结果表明,该方法在将散斑条纹图正则化的同时能够有效地滤除条纹图中的散斑噪声,为进一步提取条纹位相奠定了良好的基础。     

一种通过条纹方向图提取散斑条纹中心线的方法

在光测力学中,如何从单幅散斑干涉条纹图中消除散斑噪声,高精度自动提取相位信息,是一项较困难的工作。本文提出了一种计算条纹方向的简单算法,以及通过条纹方向图提取散斑条纹中心线的方法。实验表明此方法对高噪声的散斑条纹图非常有效。     

用曲线大窗口平滑散斑条纹图的方法研究

提出一种计算条纹方向的简单算法,以及通过条纹方向图获得沿条纹方向的曲线窗口并对散斑条纹图进行曲线大窗口滤波的方法．实验表明此方法较好地消除了散斑条纹图的噪声,同时尽量减小了对条纹结构的损害．为从单幅散斑条纹图中应用条纹中心线法或全灰度法进一步提取相位场的后处理,奠定了良好的基础．     

数字剪切散斑相关条纹图的形成及其分析

本文提出了用线性相关计算形成高可见度的数字剪切散斑相关条纹图的方法，为相关条纹图的自动分析奠定了良好的基础。文中还推导了附加位相与物光反射镜转角的关系，使精确地计算附加位相成为可能。同时还介绍了任意附加位相的三步相移技术。最后给出了用线性相关计算法形成的相关条纹图及计算出的位相图。     

数字剪切散斑相关条图的形成及其分析

本文提出了用线性相关计算形成高可见度的数字剪切散斑相关条纹图的方法，为上关条纹图的自动分析奠定了良好的基础，文中还推导了附加位相与物光反射镜转角的关系，使精确地计算附加位相成为可能。同时还介绍了任意附加位相的三步相移技术，最后给出了用线性相关计算法形成的相关条纹图及计算出的位相图。     

剪切散斑中新的相移技术及其在泵体上的应用研究

本文实现了一种新的剪切散斑干涉技术的载波方法.其特点是通过移动剪切棱镜,而产生载波条纹来调制变形条纹.然后,利用傅立叶变换法解调出变形条纹,获得全场位相图.本文介绍了这种载波相移技术的原理,并且对该载波技术的原理进行了推导.最后将该方法运用到舰用主泵体的离面位移导数(应变)测量上.     

数字散斑剪切干涉及偏转平台法相移系统研究

在传统的剪切电子散斑干涉中 ,直接观测到的是干涉条纹图样。因此 ,如何将位移导数场的定量信息从剪切电子散斑干涉条纹图案中提取出来 ,一直是人们关心的问题。本文运用传播光矢量对数字散斑剪切干涉的条纹形成作了理论解释 ,使其物理意义更加清晰。理论分析表明 ,物体的微小偏转可引入线性附加位相。因此 ,通过连续偏转物体可实现剪切电子散斑干涉的相移。本研究通过计算机控制载物平台的精细旋转实现相移 ,结合传统的数字散斑剪切干涉技术以及四步相移算法 ,实现了数字剪切散斑干涉相移系统。利用该系统进行了中心加载、周边固定的圆盘的典型实验 ,实验结果表明该系统可以方便有效地提取出位移导数场的定量信息。     

用二维FFT滤波消除ESPI条纹中的散斑颗粒噪声

在 ESPI 条纹中,由于存在散斑颗粒,使得条纹对比度极大地下降.并给进一步的分析造成较大的因难.本文用二维 FFT 方法,并配以多种低通滤波函数,有效地消除了条纹图中的散斑颗粒。该方法对原始条纹图质量无任何要求,适用于各种形状的条纹.     

区域密度滤波及其在数字散斑条纹处理中的应用

利用统计学原理对数字错位散斑条纹的形成进行了系统分析，并针对散斑条纹图所特有颗粒性强的特点，提出一种新的空域滤波方法－区域密度滤波。该方法能更有效地抑制散斑图中的高频噪声，也使条纹图更平滑，并且细节得到了最大程度的保存，避免了有些空域滤波法因误差积累而导致条纹移动的问题，进一步保证了相移技术和神经网络系统的计算精度。     

错位散斑云纹法测量应变场

本文建议的错位散斑云纹法是在错位散斑干涉的基础上,通过在光路中附加虚位移的方法获得错位散斑干涉条纹的相减云纹图,从而扣除离面位移导数,获得单纯的面内位移导数场即应变场。典型实验证实这一方法可以有效地获取全场应变条纹图。     

Optical Metrology by Fringe Processing on Independent Windows Using a Genetic Algorithm

We present a method to retrieve the phase of a fringe pattern based on the window fringe pattern demodulation technique (WFPD). The overlapped phase similarity criterion is avoided in the proposed method, and it is substituted by a second order smoothness criterion. The fringe processing on independent windows (FPIW) method can measure physical quantities from closed and near sub-sampled fringe patterns by a simplified cost or fitness function. The fringe image is divided into a set of partially overlapping windows. In these sub-images the estimated phase is modelled as a parametric analytic-function, and its parameters are optimized using a genetic algorithm (GA). This analytic-function is used to estimate the phase in the area framed by the window. Phases from all windows are sequentially spliced to retrieve the whole phase field. A media filter is applied over the entire phase field to smooth the irregularities that appear in the junctures between windows.     

Experimental full field investigations of resonant vibrations for piezoceramic plates by an optical interferometry method

The experimental measurement of resonant frequencies for piezoelectric material is generally performed by impedance analysis. In this paper we employ an optical interferometry method, called amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI), to investigate the vibration characteristics of piezoceramic plates. This method demonstrates its advantages of combining noise reduction, like the subtraction method, and high fringe sensitivity, like the time-averaged method. As compared with the film recording and optical reconstruction procedures used for holographic interferometry, the interferometric fringes of AF-ESPI are produced instantly by a video recording system. Based on the fact that clear fringe patterns measured by the AF-ESPI method will be shown only at resonant frequencies, both the resonant frequencies and corresponding mode shapes are obtained experimentally at the same time. Excellent quality for the interferometric fringe patterns of the mode shapes is demonstrated. We find from experimental results that the out-of-plane vibration modes (type A) with lower resonant frequencies cannot be measured by impedance analysis and only the in-plane vibration modes (type B) will be shown. However, both the out-of-plane (bending) and in-plane (extension) vibration modes of piezoceramic plates are obtained by the AF-ESPI method. Finally, numberical finite element calculations are also performed, and the results are compared with the experimental measurements. Excellent agreement for the resonant frequencies and mode shapes are obtained from both results.     

A convenient look-up-table based method for the compensation of non-linear error in digital fringe projection

Although the structured light system that uses digital fringe projection has been widely implemented in three-dimensional surface profile measurement, the measurement system is susceptible to non-linear error. In this work, we propose a convenient look-up-table-based(LUT-based) method to compensate for the non-linear error in captured fringe patterns. Without extra calibration, this LUT-based method completely utilizes the captured fringe pattern by recording the full-field differences. Then, a phase compensation map is established to revise the measured phase. Experimental results demonstrate that this method works effectively.     

加窗傅里叶滤波和相干增强扩散在条纹去噪中的比较分析

光学干涉测量具有非接触、高精度和全场测量的优点,能对形变、折射率、位移等信息进行测量。噪声滤除是光学干涉测量产生的条纹图像处理的一个关键问题。加窗傅里叶滤波(Windowed Fourier Filtering,WFF)与自适应加窗傅里叶滤波(Adaptive Windowed Fourier Filtering,AWFF)是有效的频域去噪算法。相干增强扩散(Coherence Enhancing Diffusion,CED)则是基于偏微分方程的空域去噪算法。针对条纹去噪问题,比较了WFF、AWFF和CED在不同密度和不同噪声类型的条纹图上的表现,分析了它们的适用条纹类型。     

双折射材料初应力的定量研究相移等达因技术的应用

文章提出两种用相移等达因技术对存在于双折射材料内部的初始应力进行定量分析的方法，并以两种常用的双折射材料Ｐ６和Ｈｏｍａｌｉｔｅ１００为例进行了内部初应力的实验研究，给出了材料内部初应力的分布。以上研究说明双折射内部初始应力不容忽视，数字相移等达因技术是双折射材料内部初始应力进行定量分析的有力手段     

Global Doppler frequency shift detection with near-resonant interferometry

The recent development in measuring 2D Doppler shift distributions for flow velocimetry using the dispersive properties of atomic line filters is presented. On the basis of velocity field measurements on a subsonic jet flow and a tip vortex flow in a medium-sized wind tunnel, the technique was assessed. Atomic line filters near a resonant transition combine imaging capabilities with a sharp frequency cutoff and an associated region of strong anomalous dispersion. While conventional Doppler global velocimetry relies on the absorption of the filter to convert frequency shifts to intensity variations, near-resonant interferometry uses its dispersion to detect frequency shifts as phase changes in an interference pattern. In the present setup, an iodine vapor cell in an imaging Michelson interferometer is used. With the illuminating laser frequency tuned near a resonant transition, the cell’s dispersion converts the frequency content of the field of view into a distortion of the carrier-fringe pattern recorded at the image plane of the interferometer. The phase distribution in the fringe images is reconstructed by filtering the individual images with a 2D Gabor filter pair tuned to the spatial frequencies of the basic carrier-fringe pattern. The post-processing is concluded with subsequent phase-unwrapping and subtraction of the carrier reference fringe phase. The method and the setup were demonstrated and calibrated experimentally on a rotating disc. The capability of the technique to operate in a real experimental environment was validated in a free subsonic jet and a tip vortex flow behind a wing section in a medium-sized wind tunnel facility. The measurements were found to be in generally good agreement with the theoretically predicted system characteristics and the reference measurements. As with other Doppler global techniques, the stability of the pulsed laser system and the secondary scattering in the test volume were identified as the main error sources.