突发环境事件现场应急监测仪器技术现状及展望

突发环境事件现场应急监测是环境监测工作的重要组成部分.与常规实验室环境监测分析相比,现场应急监测的时效性要求更高,需要做到对环境污染物的快速定性与半定量分析.本文在分析现场应急监测仪器技术的基本特点基础上,从现场应急监测的环境介质、待监测项目、监测仪器技术分类等方面入手,重点对国内光谱法、色谱/质谱法和电化学法等类别的现场应急监测仪器技术现状进行了总结,最后对现场应急监测仪器技术的未来发展趋势进行了展望.     

Assigning environmental variables to observed biological changes

A method for assigning environmental variables to observed biological changes in benthic communities is proposed. The approach requires biological and environmental sampling at the same sites. Additionally, a biological gradient or trend such as a change in observed species or a significant change in their relative abundances is necessary in order to connect the biological observations to the environmental measurements. Whether there is a statistical significant correspondence between the environmental measurements and the biological changes is tested after quantifying the biological changes by using the community disturbance index (CDI). Finally, the environmental variables that are most strongly associated with the biological changes are identified, and it is proposed that these are strong candidates as the pollutants responsible for the biological changes observed. However, this cannot be confirmed using the monitored data only. The approach is tested on data collected in monitoring surveys at the Ekofisk oil field in the North Sea. The results indicate the method is feasible for assigning environmental variables to observed biological changes.     

Recent advances in BiOBr-based photocatalysts for environmental remediation

The efficient utilization of solar energy through photocatalysis is ideal for solving environmental issues and the development sustainable future. BiOBr-based semiconductors possess unique narrowed bandgaps and layered structures, thereby widely studied as photocatalysts for environmental remediation. However, a little has been focused on the comprehensive reviewing of BiOBr despite its extensive and promising applications. In this review, the state-of-the-art developments of BiOBr-based photocatalysts for environmental remediation are summarized. Particular focus is paid to the synthetic strategies for the control of the resulting morphologies, as well as efficient modification strategies for improving the photocatalytic activities. These include boosting the bulk phase by charge separation, enhancing the spatial charge separation, and engineering the surface states. The environmental uses of BiOBr-based photocatalysts are also reviewed in terms of purification of pollutants and CO₂ reduction. Finally, future challenges and opportunities of BiOBr-based materials in photocatalysis are discussed. Overall, this review provides a good basis for future exploration of high-efficiency solar-driven photocatalysts for environmental sustainability.     

Recent progress in environmental catalytic technology

Recent progress and trends in environmental catalytic technology in Japan are described with emphasis on the catalysts having hybridized functions. In addition to automobile exhaust cleaning, use of environmental catalysts such as titanium oxide photocatalysts is rapidly growing for the control of residential environments, e.g., antimicrobial activity and odor control, as life styles change gradually and the living environment is deteriorating considerably. Many new catalysts are evolving through hybridization of functions. The market of environmental catalyst products in 2005 is estimated 2,000 billion yen/year (photocatalyst: 1,100 billion yen/year).     

环境样品分析

本文是“分析试验室”定期评述“环境样品分析”的第8篇综述。它全面评述了2004年1月至2005年12月间我国环境样品分析各个方面的进展，主要内容包括：概述，大气、水体、土壤和沉积物、生物样品分析，质量控制和质量保证等。引用参考文献967篇。     

Sampling, sample treatment and quality assurance issues for the determination of phosphorus species in natural waters and soils

Phosphorus is an important macronutrient and the accurate determination of phosphorus species in environmental matrices such as natural waters and soils is essential for understanding the biogeochemical cycling of the element, studying its role in ecosystem health and monitoring compliance with legislation. This paper provides a critical review of sample collection, storage and treatment procedures for the determination of phosphorus species in environmental matrices. Issues such as phosphorus speciation, the molybdenum blue method, digestion procedures for organic phosphorus species, choice of model compounds for analytical studies, quality assurance and the availability of environmental CRMs for phosphate are also discussed in detail.     

Analysis of Iodine-129 in Environmental Materials: Quality Assurance and Applications

The long-lived radionuclide ¹²⁹I (T _1/2 = 15.7 My) occurs in the nature in very low concentrations. Since the middle of our century the environmental levels of ¹²⁹I have been dramatically changed as a consequence of civil and military use of nuclear fission. Its investigation in environmental materials is of interest for environmental surveillance, retrospective dosimetry and for the use as a natural and man-made fracers of environmental processes. We are comparing two analytical methods which presently are capable of determining ¹²⁹I in environmental materials, namely radiochemical neutron activation analysis (RNAA) and accelerator mass spectrometry (AMS). Emphasis is laid upon the quality control and detection capabilities for the analysis of ¹²⁹I in environmental materials. Some applications are discussed.     

环境化学的回顾与展望

环境化学是化学和环境科学的重要分支。文中简要回顾了２０年来环境化学的发展历程、主要成就和我国环境化学研究取得的成绩并对未来环境化学的发展作了简要讨论。     

自贡市城市地质环境分区评价

从自然地理条件、地质条件、环境质量、环境地质问题等方面着手,以地形地貌、区域地壳稳定性、岩（土）体工程地质特征、环境污染、地质灾害为要素开展了自贡市城市地质环境质量评价;采用了权重法、层次分析法等计算方法得出了地质环境综合评价指数,对自贡市进行了地质环境评价分区;为城市的发展规划提供了可靠的地质依据。     

Quantifying the measurement uncertainty of results from environmental analytical methods

The Eurachem–CITAC Guide Quantifying Uncertainty in Analytical Measurement was put into practice in a public laboratory devoted to environmental analytical measurements. In doing so due regard was given to the provisions of ISO 17025 and an attempt was made to base the entire estimation of measurement uncertainty on available data from the literature or from previously performed validation studies. Most environmental analytical procedures laid down in national or international standards are the result of cooperative efforts and put into effect as part of a compromise between all parties involved, public and private, that also encompasses environmental standards and statutory limits. Central to many procedures is the focus on the measurement of environmental effects rather than on individual chemical species. In this situation it is particularly important to understand the measurement process well enough to produce a realistic uncertainty statement. Environmental analytical methods will be examined as far as necessary, but reference will also be made to analytical methods in general and to physical measurement methods where appropriate. This paper describes ways and means of quantifying uncertainty for frequently practised methods of environmental analysis. It will be shown that operationally defined measurands are no obstacle to the estimation process as described in the Eurachem/CITAC Guide if it is accepted that the dominating component of uncertainty comes from the actual practice of the method as a reproducibility standard deviation.     

Sampling and sampling strategies for environmental analysis

Sampling errors are generally believed to dominate the errors of analytical measurement during the entire environmental data acquisition process. Unfortunately, environmental sampling errors are hardly quantified and documented even though analytical errors are frequently yet improperly reported to the third decimal point in environmental analysis. There is a significant discrepancy in directly applying traditional sampling theories (such as those developed for the binary particle systems) to trace levels of contaminants in complex environmental matrices with various spatial and temporal heterogeneities. The purpose of this critical review is to address several key issues in the development of an optimal sampling strategy with a primary goal of sample representativeness while minimizing the total number of samples and sampling frequencies, hence the cost for sampling and analysis. Several biased and statistically based sampling approaches commonly employed in environmental sampling (e.g. judgmental sampling and haphazard sampling vs. statistically based approaches such as simple random, systematic random, and stratified random sampling) are examined with respect to their pros and cons for the acquisition of scientifically reliable and legally defensible data. The effects of sample size, sample frequency and the use of compositing are addressed to illustrate the strategies for a cost reduction as well as an improved representativeness of sampling from spatially and temporally varied environmental systems. The discussions are accompanied with some recent advances and examples in the formulation of sampling strategies for the chemical or biological analysis of air, surface water, drinking water, groundwater, soil, and hazardous waste sites.     

Quantifying the measurement uncertainty of results from environmental analytical methods

The Eurachem-CITAC Guide Quantifying Uncertainty in Analytical Measurement was put into practice in a public laboratory devoted to environmental analytical measurements. In doing so due regard was given to the provisions of ISO 17025 and an attempt was made to base the entire estimation of measurement uncertainty on available data from the literature or from previously performed validation studies. Most environmental analytical procedures laid down in national or international standards are the result of cooperative efforts and put into effect as part of a compromise between all parties involved, public and private, that also encompasses environmental standards and statutory limits. Central to many procedures is the focus on the measurement of environmental effects rather than on individual chemical species. In this situation it is particularly important to understand the measurement process well enough to produce a realistic uncertainty statement. Environmental analytical methods will be examined as far as necessary, but reference will also be made to analytical methods in general and to physical measurement methods where appropriate. This paper describes ways and means of quantifying uncertainty for frequently practised methods of environmental analysis. It will be shown that operationally defined measurands are no obstacle to the estimation process as described in the Eurachem/CITAC Guide if it is accepted that the dominating component of uncertainty comes from the actual practice of the method as a reproducibility standard deviation.     

Stated references for ensuring traceability of chemical measurements for long-term environmental monitoring

Traceability is now considered to be a key concept in chemical and biological measurement sciences. While this concept is increasingly used in many areas, it is still prone to misunderstandings with respect to more ‘classical' terms such as e.g. accuracy. Traceability implies that measurement data are linked to stated references through an unbroken chain of comparisons, all with stated uncertainties. What does the word ‘stated references' mean when it is applied to complex environmental analysis? This paper discusses how traceability can be conceived in the context of environmental monitoring, in particular the various stated references (documented standards, reference materials, environmental specimens) to which chemical environmental data may be linked to.     

微流控纸芯片在环境分析检测中的应用

近年来,微流控纸芯片由于低成本、便携化、检测快等优点,在需要快速检测的环境分析领域中展现出了巨大的应用前景。该综述从微流控纸芯片在环境分析中的应用角度,总结归纳了微流控纸芯片在环境分析中的最新研究进展,并展望了其在未来的发展趋势与挑战。论文内容引用150余篇源于科学引文索引(SCI)与中文核心期刊中的相关论文。该综述包括微流控纸芯片在环境检测中的优势与制造方法介绍;电化学法、荧光法、比色法、表面增强拉曼法、集成传感法等基于纸芯片的先进分析方法介绍;根据环境分析目标物种类,如重金属离子、营养盐、农药、微生物、抗生素以及其他污染物等,对纸芯片的最新应用现状进行了举例评述;基于微流控纸芯片的环境分析研究的未来发展趋势和前景展望。通过综述近期相关研究,表明微流控纸芯片从提出至今虽然只有十几年的发展历程,但其在环境分析研究中的发展却十分迅速。微流控纸芯片可以根据不同的环境条件和检测要求灵活选择制作与分析方法,实现最佳的检测效果。但是微流控纸芯片也面临一些挑战,如纸张机械强度不足、流体控制程度不佳等问题。这些问题指出了微流控纸芯片在环境检测领域的发展趋势,相信随着不断深入的研究,纸芯片将会在未来的环境分析中发挥更大作用。     

可用于环境修复的半导体光催化剂及其改性策略研究进展

多相光催化技术作为一种直接利用太阳光降解多种污染物的先进氧化工艺在环境修复领域的研究中引起了广泛关注.在多相光催化过程中,半导体材料在太阳光的激发下,其强大的氧化/还原能力可快速高效降解各种污染物.研究者通常根据环境中污染物的状态和种类选择合适的半导体材料及修饰策略,构建高效多相光催化体系,探究光催化材料在环境修复中的...     

Accreditation for United States environmental laboratories

 There is currently no national program for recognition of United States environmental laboratories. This situation should change sometime in 1998 as environmental testing laboratories should be able to apply for accreditation in the United States via a system developed by the National Environmental Laboratory Accreditation Conference (NELAC). NELAC is an organization whose purpose is to establish performance standards for accrediting environmental laboratories. Laboratories to be accredited will be required to demonstrate qualifications of testing personnel, pass on-site inspections, perform satisfactorily on proficiency test samples, and meet specified quality assurance standards.     

Isomer specific determination of polychlorinated technical mixtures such as polychloronaphthalenes by GC/MS

Summary A procedure has been developed which allows the determination of the concentration and composition of polychlorinated technical mixtures in environmental samples avoiding the use of standard compounds as much as possible. A common MS response of the congeners of each degree of chlorination is assumed and determined by comparison of the FID and MS response of the respective congeners in a technical mixture. A measure for the variability of the assumed common MS response is derived so that its validity is proved in an objective manner. The method presented here allows the isomer specific determination of those polychlorinated technical mixtures in environmental samples which could not so far be determined in this way for lack of standards. The polychlorinated naphthalenes are quoted as illustration and a few data of residues in environmental samples are given.     

实验室安全环保意识的调查与分析——以中山大学化学类专业学生为例

A survey about students' laboratory safety and environmental protection consciousness was performed in the freshmen majored in chemistry at Sun Yat-Sen University. Results showed that laboratory safety and environmental protection consciousness of most students' are weak. After analyzing the reasons, we put forward some suggestions. Cultivating students' laboratory safety and environmental protection consciousness should be carried out from several aspects such as emphasizing and regulating from school level, training in laboratory teaching, maintaining good cultural atmosphere of laboratory, as well as providing perfect laboratory safety and environmental protection facilities. We should guide students to actively learn knowledge and skills of laboratory safety and environmental protection in order to develop their good behavior and raise their consciousness.     

Environmental certification: a scientific tool for sustainability. Evaluation of possible indicators for the environmental performance evaluation (EPE) of Ravenna province (Italy)

Environmental certification is becoming the main tool for application of sustainable development principles. The European Regulation Emas and the international standard ISO 14001 both require for certification, to perform an environmental management system to prevent environmental impacts and to continuously improve environmental performance. For a good environmental performance evaluation (EPE), certification needs to use scientific methodologies and to interface with scientific research; here we proposed emergy analysis as a valid method for EPE and emergetic environmental performance and condition indicators (EPIs, ECIs) to monitor a territorial system: Ravenna province (Italy). Together with emergy indicators were selected other indicators for a deeper EPE: emitted/adsorbed CO2, energy consumptions, air and water pollution measures. The paper showed that Ravenna system has a good environmental performance and demonstrated how different indicators from the most advanced chemical research (chemical-physical, analytical, etc.) contribute to a complete EPE of a complex territorial system and are useful for environmental certification and sustainable development.     

Umweltprobenbanken-eine wichtige Säule der Umweltbeobachtung

Natural events as well as human activities are affecting the environment and even with largescale monitoring programs it is not possible to completely assess the state of the environment. But a documentation of the environmental status with respect to its chemical composition can be realized with systematically collected representative environmental samples, which can be stored for decades at very low temperatures almost without degradation. Such ‘banking activity’ allows a current environmental monitoring and also a retrospective analysis for the determination of components which have not been analyzed at the time of sampling because of ta lack in analytical techniques or because they have not been known or considered environmentally relevant. The concept of environmental specimen banking and general procedures are described. Various examples illustrate the many facets of such activities.