Study of alloxydim photodegradation in the presence of natural substances: Elucidation of transformation products

A photodegradation study of alloxydim was performed under simulate solar irradiation (Suntest apparatus) at different irradiation intensities. Moreover, indirect photolysis of the tested herbicide was investigated under the presence of various concentrations of humic acids (HA), nitrate and Fe (III) ions. The photodegradation of alloxydim follows a first-order reaction kinetics in all cases. HA inhibited the photolysis kinetic whereas rate constants measured in the presence of nitrate ions indicated no effect on degradation. On the contrary, Fe (III) ions enhanced the photodegradation rate of alloxydim. Kinetics experiments were monitored by HPLC–DAD and the half-lives ranged from 165.78 to 4.63 min for different intensities in direct photolysis and from 104.81 to 1.14 min for indirect photolysis. The study of transformation products have been investigated by HPLC coupled to quadrupole time-of-flight mass spectrometry (QTOF-MS) employing the electrospray technique.The most important transformation process was found to be the cleavage of the O–N bond of the oxime moiety. Minor photo-isomerization to Z-isomer was also observed. The appearance of these degradation products is reported in aqueous media for the first time.     

Photostability of the sunscreening agent 4-tert-butyl-4′-methoxydibenzoylmethane (avobenzone) in solvents of different polarity and proticity

The most widely used UVA absorber in broad-spectrum sunscreens is 4-tert-butyl-4′-methoxydibenzoylmethane (avobenzone). However, the photostability of avobenzone is solvent-dependent. The aim of this work was to investigate the photostability of avobenzone in solvents of different polarity and proticity. Four solvents were employed, namely, cyclohexane, ethyl acetate, dimethylsulfoxide and methanol. The cause of the instability of avobenzone in these solvents was determined by means of UV spectroscopy, high performance liquid chromatography, gas chromatography–mass spectrometry and nuclear magnetic resonance spectroscopy. The effect of oxygen on the photo-instability was also determined. Avobenzone was found to lose absorption efficacy as a result of photoisomerisation from the enol to the keto form and/or photodegradation to form photoproducts that absorb principally in the UVC region, depending on the solvent. It was found to be essentially photostable in the polar protic solvent methanol but photoisomerised in the polar aprotic solvent dimethylsulfoxide. In the nonpolar solvent cyclohexane, it photodegraded appreciably. Both photoisomerisation and photodegradation occurred to a similar extent in the moderately polar aprotic solvent ethyl acetate. Photoisomerisation occurred only in the presence of oxygen whereas photodegradation occurred irrespective of oxygen. This knowledge is important in order to achieve the correct formulation for sunscreens incorporating avobenzone.     

LIGHT-INDUCED LEAKAGE OF SPIN LABEL MARKER FROM LIPOSOMES IN THE PRESENCE OF PHOTOTOXIC PHENOTHIAZINES

Abstract— Liposomes prepared from dipalmitoyl lecithin, cholesterol and dicetyl phosphate and containing a trapped spin label marker were exposed to long wavelength UV light in the presence of a series of phenothiazine tranquilizers. EPR spectroscopy was used to detect spin label marker released from liposomes, taking advantage of the disappearance of line broadening from electron spin exchange which occurred on spin label release. The minimum effective phototoxic dose in mice of these phenothiazines was also determined. Kinetic studies of light-induced spin label release from phenothiazine-sensitized liposomes showed that membrane damage was rapidly induced and that the damaging species were short-lived. The damage process was oxygen dependent and could be temporarily prevented by cysteamine or α-tocopherol added immediately before irradiation. Only those phenothiazines which mediated light-dependent liposomal membrane damage had phototoxic activity in mice and the degree of photosensitization was parallel in the two systems. In both photosensitization phenomena, the nature of the substituent at the phenothiazine 2-position was more important than the phenothiazine side chain.     

The Role of Singlet Oxygen in Photoreactivity and Phototoxicity of Curcumin

Curcumin is a plant-derived yellow-orange compound widely used as a spice, dye and food additive. It is also believed to have therapeutic effects against different disorders. On the other hand, there are data showing its phototoxicity against bacteria, fungi and various mammalian cells. Since the mechanism of its phototoxic action is not fully understood, we investigated here the phototoxic potential of curcumin in liposomal model membranes and in HaCaT cells. First, detection of singlet oxygen (¹O₂) luminescence proved that curcumin generates ¹O₂ upon blue light irradiation in organic solvent and in liposomes. Then, HPLC-EC(Hg) measurements revealed that liposomal and cellular cholesterol is oxidized by ¹O₂ photogenerated by curcumin. Enrichment of liposome membranes with curcumin significantly increased the oxygen photo-consumption rate compared to the control liposomes as determined by EPR oximetry. Cytotoxicity measurements, mitochondrial membrane potential analyses and protein hydroperoxides detection confirmed strong phototoxic effects of curcumin in irradiated HaCaT cells. These data show that since curcumin is advertised as a valuable dietary supplement, or a component of cosmetics for topical use, caution should be recommended especially when skin is exposed to light.     

Liposomal Encapsulation of Carvacrol to Obtain Active Poly (Vinyl Alcohol) Films

Lecithins of different origins and compositions were used for the liposomal encapsulation of carvacrol within the framework of the development of active films for food packaging. Liposomes were incorporated into aqueous polymeric solutions from fully (F) and partially (P) hydrolysed Poly (vinyl alcohol) (PVA) to obtain the films by casting. The particle size distribution and ζ-potential of the liposomal suspensions, as well as their stability over time, were evaluated. Liposomal stability during film formation was analysed through the carvacrol retention in the dried film and the film microstructure. Subtle variations in the size distributions of liposomes from different lecithins were observed. However, the absolute values of the ζ-potential were higher (−52, −57 mV) for soy lecithin (SL) liposomes, followed by those of soy lecithin enriched with phosphatidylcholine (SL-PC) (−43, −50 mV) and sunflower lecithin (SFL) (−33, −38 mV). No significant changes in the liposomal properties were observed during the study period. Lyotropic mesomorphism of lipid associations and carvacrol leakage occurred to differing extents during the film drying step, depending on the membrane lipid composition and surface charge. Liposomes obtained with SL-PC were the most effective at maintaining the stability of carvacrol emulsion during film formation, which led to the greatest carvacrol retention in the films, whereas SFL gave rise to the least stable system and the highest carvacrol losses. P-PVA was less sensitive to the emulsion destabilisation due to its greater bonding capacity with carvacrol. Therefore, P-PVA with carvacrol-loaded SL-PC liposomes has great potential to produce active films for food packaging applications.     

Interaction of curcumin with lipid monolayers and liposomal bilayers

Curcumin shows huge potential as an anticancer and anti-inflammatory agent. However, to achieve a satisfactory bioavailability and stability of this compound, its liposomal form is preferable. Our detailed studies on the curcumin interaction with lipid membranes are aimed to obtain better understanding of the mechanism and eventually to improve the efficiency of curcumin delivery to cells. Egg yolk phosphatidylcholine (EYPC) one-component monolayers and bilayers, as well as mixed systems containing additionally dihexadecyl phosphate (DHP) and cholesterol, were studied. Curcumin binding constant to EYPC liposomes was determined based on two different methods: UV/Vis absorption and fluorescence measurements to be 4.26 × 10⁴ M⁻¹ and 3.79 × 10⁴ M⁻¹, respectively. The fluorescence quenching experiment revealed that curcumin locates in the hydrophobic region of EYPC liposomal bilayer. It was shown that curcumin impacts the size and stability of the liposomal carriers significantly. Loaded into the EYPC/DPH/cholesterol liposomal bilayer curcumin stabilizes the system proportionally to its content, while the EYPC/DPH system is destabilized upon drug loading. The three-component lipid composition of the liposome seems to be the most promising system for curcumin delivery. An interaction of free and liposomal curcumin with EYPC and mixed monolayers was also studied using Langmuir balance measurements. Monolayer systems were treated as a simple model of cell membrane. Condensing effect of curcumin on EYPC and EYPC/DHP monolayers and loosening influence on EYPC/DHP/chol ones were observed. It was also demonstrated that curcumin-loaded EYPC liposomes are more stable upon interaction with the model lipid membrane than the unloaded ones.     

Use of ediap mass spectrometry for determining composition of products obtained in periodate oxidation of sucrose

The possibility has been demonstrated of using EDIAP mass spectrometry for the express determination of the composition of the products obtained in the periodate oxidation of sucrose and its subsequent reduction with NaBH₄. It has been shown that the method permits the amount of oxidized glycol and triol groupings to be determined and can therefore be used successfully to establish the structure of carbohydrates. The method also permits the recording directly in the reaction mixture of the presence of the equilibrium forms produced in the interaction of aldehyde groups with molecules of the solvent or of hydroxylamine. Analysis with the aid of EDIAP mass spectrometry requires 100–200 picomoles, calculated on the initial amount of sucrose. The time of analysis is 5 min. The mass spectra contain only the peaks of quasimolecular ions of the type of [M + Na]⁺.Institute of Analytical Instrument-construction, Leningrad. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 687–695, September–October, 1988.     

Confirmation of the formation of dichlorodibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxin in the photodegradation of triclosan by photo-SPME

Photodegradation is a possible way to eliminate organic pollutants from the environment but, at the same time, can be a source of toxic byproducts. The photochemical conversion of triclosan, a common pollutant in continental waters, into dichlorodibenzo-p-dioxin (DCDD) has been confirmed in our preliminary experiments employing photo-SPME (photo-solid-phase microextraction) using 18-W UV irradiation at 254-nm wavelength. Under these conditions, triclosan is rapidly photodegraded (70% of triclosan was degraded in 2 min); the most important novel aspect of this work is the conversion of triclosan to DCDD directly on the polydimethylsiloxane coating of the SPME fiber. Moreover, this conversion is also confirmed in non-buffered aqueous photodegradation experiments using SPME as the extraction technique. In all the experiments of this study, analysis was carried out by gas chromatography–electronic impact mass spectrometry (GC–EI/MS).     

Membrane properties of cationic liposomes composed of dipalmitoylphosphatidylcholine and dipalmityldimethylammonium bromide

Cationic liposomes composed of dipalmitoylphosphatidylcholine (DPPC) and dipalmityldimethylammmonium bromide (DPAB) were prepared by the Bangham method and the effect of DPAB on the membrane properties was examined in terms of liposomal shape, particle size, trapping efficiency, surface potential and dispersibility. The dispersibility of the mixed DPPC/DPAB liposomes (the mole fraction of DPAB (X_DPAB)  0.05) was excellent and the dispersibility was maintained for 6 months, since the zeta-potential of the mixed liposomes was approximately +40 mV. The trapping efficiency of the mixed DPPC/DPAB liposomes (X_DPAB = 0.05) was 10 times greater than that of the DPPC liposomes, and the value was largest among the mixed liposomes (X_DPAB = 0–1.0). Freeze-fracture electron micrographs indicated that the shape of the mixed DPPC/DPAB liposomes (X_DPAB = 0.05) was that of large unilamellar vesicles (LUVs) with a diameter of approximately 2 μm, while the shape of the DPPC liposomes was that of multilamellar vesicles (MLVs). The mixed liposomes had, therefore, a high trapping efficiency. Furthermore, the shape of the mixed DPPC/DPAB liposomes (X_DPAB = 0.75) was also that of LUVs with a diameter of approximately 2 μm and these had a high trapping efficiency. Whereas, the particle size (500 nm) of the mixed DPPC/DPAB liposomes (X_DPAB = 0.25) was smaller than that of the former and had the minimum trapping efficiency. The phase transition temperature of the liposomal bilayer membranes indicated a maximum value at 0.25–0.30 mole fractions of DPAB. These facts were considered to be due to the fact that DPPC and DPAB, whose molar ratio was 7.5:2.5, were tightly packed in the liposomal bilayer membranes and that the curvature of the liposomal particle was resultantly large. Nevertheless, LUVs having a high trapping efficiency were easily obtained by mixing a small amount of DPAB with the DPPC.     

Impact of chitosan coating of anionic liposomes on clearance rate, mucosal and systemic immune responses following nasal administration in rabbits

Liposomes have been identified as effective immunological adjuvants and have potential for the intranasal and oral delivery of protein antigen. Anionic MLV liposomes were prepared by dehydration–rehydration method. For coating, liposomes were incubated in chitosan solution. Efficiency of coating was confirmed by the evaluation of FITC-labelled chitosan-coated liposomes using a fluorescent microscope. Liposomes morphology and size were studied by optical microscope and size analyzer. Mucoadhesion potential of liposomes was evaluated in human nose by gamma-scintigraphy using ^99mTc-labelled liposomes. Rabbits (4 animals per group) were nasally immunized in weeks 0, 2 and 4 by liposomes encapsulated with 40 Lf TT. Bleedings and lavage collections were taken place in weeks 3 and 6, and IgG and sIgA titers were measured by ELISA method.Liposomes had a mean diameter of 2.38 μm. Loading of TT was 58.7 ± 12.4%. The mucoadhesion (clearance rate from nose) of both coated and non-coated liposomes was similar (P > 0.05). Among the immunized animals, the highest nasal lavage sIgA titers were seen in non-coated liposomes followed by coated ones. The serum IgG titers (2nd bleeding) in animals immunized by both kinds of liposome were similar (P > 0.05), and were lower than the TT solution group (P < 0.05). Immunization by i.m. injection of TT solution resulted in the lowest sIgA and highest IgG titers (P < 0.05) compared with liposomal groups.The results were indicative of good potential of negatively charged liposomes in the induction of mucosal immunity. Coating of liposomes by chitosan, failed to increase both the residence time of liposomes in nasal cavity and systemic responses. Conversely, coated liposomes could not induce the mucosal responses as efficiently as non-coated liposomes. It seems that the coating of liposomes affected their interaction potential with nasal associated lymphoid tissue cells.     

Direct catalytic oxidation of n-butane to to tetrahydrofuran

The feasibility of partially oxidizing n-butane to tetrahydrofuran in the presence of promoted V-P-O catalyst was demonstrated. Tetrahydrofuran formation was identified by means of chromatography and mass spectrometry. From the relationship between its concentration and reaction temperature tetrahydrofuran could be proposed as a possible intermediate in the transformation of n-butane into maleic anhydride.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 28, No. 2, pp. 159–162, March–April, 1992.     

Quality-by-Design-Based Development of n-Propyl-Gallate-Loaded Hyaluronic-Acid-Coated Liposomes for Intranasal Administration

The present study aimed to develop n-propyl gallate (PG)-encapsulated liposomes through a novel direct pouring method using the quality-by-design (QbD) approach. A further aim was to coat liposomes with hyaluronic acid (HA) to improve the stability of the formulation in nasal mucosa. The QbD method was used for the determination of critical quality attributes in the formulation of PG-loaded liposomes coated with HA. The optimized formulation was determined by applying the Box–Behnken design to investigate the effect of composition and process variables on particle size, polydispersity index (PDI), and zeta potential. Physiochemical characterization, in vitro release, and permeability tests, as well as accelerated stability studies, were performed with the optimized liposomal formulation. The optimized formulation resulted in 90 ± 3.6% encapsulation efficiency, 167.9 ± 3.5 nm average hydrodynamic diameter, 0.129 ± 0.002 PDI, and −33.9 ± 4.5 zeta potential. Coated liposomes showed significantly improved properties in 24 h in an in vitro release test (>60%), in vitro permeability measurement (420 μg/cm²) within 60 min, and also in accelerated stability studies compared to uncoated liposomes. A hydrogen-peroxide-scavenging assay showed improved stability of PG-containing liposomes. It can be concluded that the optimization of PG-encapsulated liposomes coated with HA has great potential for targeting several brain diseases.     

Metallomics in drug development: characterization of a liposomal cisplatin drug formulation in human plasma by CE–ICP–MS

A capillary electrophoresis inductively coupled plasma mass spectrometry method for separation of free cisplatin from liposome-encapsulated cisplatin and protein-bound cisplatin was developed. A liposomal formulation of cisplatin based on PEGylated liposomes was used as model drug formulation. The effect of human plasma matrix on the analysis of liposome-encapsulated cisplatin and intact cisplatin was studied. The presence of 1 % of dextran and 4 mM of sodium dodecyl sulfate in HEPES buffer was demonstrated to be effective in improving the separation of liposomes and cisplatin bound to proteins in plasma. A detection limit of 41 ng/mL of platinum and a precision of 2.1 % (for 10 μg/mL of cisplatin standard) were obtained. Simultaneous measurements of phosphorous and platinum allows the simultaneous monitoring of the liposomes, liposome-encapsulated cisplatin, free cisplatin and cisplatin bound to plasma constituents in plasma samples. It was demonstrated that this approach is suitable for studies of the stability of liposome formulations as leakage of active drug from the liposomes and subsequent binding to biomolecules in plasma can be monitored. This methodology has not been reported before and will improve characterization of liposomal drugs during drug development and in studies on kinetics.

1-Nucleosides of 5-substituted 4-chloro-1,2,3-triazoles

1-Nucleosides of 5-substituted 4-chloro-1,2,3-triazoles were produced by glycosylation of the corresponding triazoles by the method of fusion with tetra-0-acyl-D-ribofuranose in the presence of bis-p-nitrophenyl phosphate. The structure of the compounds obtained and their conformational peculiarities were studied by the methods of mass spectrometry and NMR spectroscopy.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1556–1564, November, 1984.     

Reactive Oxygen Species (ROS) Activated Liposomal Cell Delivery using a Boronate-Caged Guanidine Lipid

We report boronate-caged guanidine-lipid 1 that activates liposomes for cellular delivery only upon uncaging of this compound by reactive oxygen species (ROS) to produce cationic lipid products. These liposomes are designed to mimic the exceptional cell delivery properties of cell-penetrating peptides (CPPs), while the inclusion of the boronate cage is designed to enhance selectivity such that cell entry will only be activated in the presence of ROS. Boronate uncaging by hydrogen peroxide was verified by mass spectrometry and zeta potential (ZP) measurements. A microplate-based fluorescence assay was developed to study the ROS-mediated vesicle interactions between 1 -liposomes and anionic membranes, which were further elucidated via dynamic light scattering (DLS) analysis. Cellular delivery studies utilizing fluorescence microscopy demonstrated significant enhancements in cellular delivery only when 1 -liposomes were incubated with hydrogen peroxide. Our results showcase that lipid 1 exhibits strong potential as an ROS-responsive liposomal platform for targeted drug delivery applications.     

Investigation of a liposomal oxaliplatin drug formulation by capillary electrophoresis hyphenated to inductively coupled plasma mass spectrometry (CE-ICP-MS)

A capillary electrophoresis-inductively coupled plasma mass spectrometry (CE-ICP-MS) method was developed for separation of the free oxaliplatin drug substance from liposome-entrapped oxaliplatin. Simultaneous determination of phosphorous and platinum opened the possibility to simultaneously monitor the liposomes (phospholipids) and platinum-based drug. In order to suppress the interferences, argon gas was used as a collision gas in ICP-MS. A detection limit of 29 ng/mL of platinum and a precision of 2.9% (for 10 μg/mL of oxaliplatin standard) were obtained. Measurement of the total concentration of free and encapsulated oxaliplatin by CE-ICP-MS was compared with total determination by ICP-MS after microwave digestion and showed a good agreement. A liposomal formulation of oxaliplatin based on PEGylated liposomes was used as a model drug formulation. Studies of accelerated drug release induced by sonication and phospholipase A₂ catalyzed hydrolysis were performed. It was demonstrated that the CE-ICP-MS was an efficient in vitro characterization method in the development and quality assurance purposes of lipsome-based formulation of metallodrugs.     

The structure of magnolamine

Summary It has been shown that the bisbenzylisoquinoline alkaloid magnolamine has the structure (II) and not the (I) proposed previously. The structure was determined on the basis of a study by the methods of NMR spectroscopy and mass spectrometry with the alkaloid and its transformation products.All-Union Scientific-Research Institute of Medicinal Plants, Moscow. Translated from Khimiya Prirodnyk Soedinenii, No. 2, pp. 234–239, March–April, 1977.     

Sol-Gel Synthesis and Characterisation of TiO2-Anatase Powders Containing Nanometric Platinum Particles Employed as Catalysts for 4-Nitrophenol Photodegradation

A set of TiO₂ and Pt-TiO₂ polycrystalline samples were prepared by sol-gel method hydrolysing a modified alkoxide titanium precursors under acidic conditions. The Pt-TiO₂ samples gave an homogeneous nanometric metal dispersion after drying heat treatment forming platinum particles in the range 2–4 nm. All the samples have been characterised using several techniques, namely thermogravimetric analysis, gas-chromatography, mass spectrometry, thermogravimetric analysis combined with mass spectrometry or with gas chromatography/mass spectrometry, X-ray diffraction coupled with a Rietveld refinement procedure, X-ray photoelectron spectroscopy and determination of specific surface area. Moreover, the samples have been employed as catalysts for 4-nitrophenol photodegradation in aqueous suspension used as a probe reaction. Characterisation results indicate that the thermal and chemical treatments of the catalysts influenced the photocatalytic activity. In the Pt-TiO₂ samples both Pt(0) and Pt(II) species are present in the catalyst particles and the most abundant phase is anatase for all of the samples. Doping with Pt beneficially influences the photo-oxidant properties of TiO₂ while the presence of organic residual species on the surface, deriving from the preparation procedure of the catalyst particles interferes negatively in the kinetics of the photocatalytic process.     

gem-Dialkoxylation of 2-acetylthiophenes and 2-acetylfurans

Reaction of 2-acetyl-substituted thiophenes and furans with alkyl nitrites in the presence of the corresponding aliphatic alcohols and hydrochloric acid leads to the formation of linear acetals of thienyl- and furylglyoxals, whose structure was established by IR, UV, NMR spectroscopy, and mass spectrometry methods. The main paths of the dissociation of the molecules under electron impact were established.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 772–775, June, 1987.     

The Effect of the Liposomal Encapsulated Saffron Extract on the Physicochemical Properties of a Functional Ricotta Cheese

In this study, the encapsulation of saffron extract (SE) was examined at four various concentrations of soy lecithin (0.5%–4% w/v) and constant concentration of SE (0.25% w/v). Particle size and zeta potential of liposomes were in the range of 155.9–208.1 nm and −34.6–43.4 mV, respectively. Encapsulation efficiency was in the range of 50.73%–67.02%, with the stability of nanoliposomes in all treatments being >90%. Encapsulated SE (2% lecithin) was added to ricotta cheese at different concentrations (0%, 0.125%, 1%, and 2% w/v), and physicochemical and textural properties of the cheese were examined. Lecithin concentration significantly (p ≤ 0.05) affected the particle size, zeta potential, stability, and encapsulation efficiency of the manufactured liposomes. In terms of chemical composition and color of the functional cheese, the highest difference was observed between the control cheese and the cheese enriched with 2% liposomal encapsulated SE. Hardness and chewiness increased significantly (p ≤ 0.05) in the cheeses containing encapsulated SE compared to the control cheese. However, there was no significant difference in the case of adhesiveness, cohesiveness, and gumminess among different cheeses. Overall, based on the findings of this research, liposomal encapsulation was an efficient method for the delivery of SE in ricotta cheese as a novel functional food.