Application of anodized aluminum in fluorescence detection of biological species

Thin nanoporous alumina obtained by anodization of aluminum films offers promising advantages for application in fluorescence-based biological sensors including convenient preparation, increased density of binding sites, and improved collection efficiency of fluorescence. These advantages are illustrated in the detection of streptavidin using biotin covalently bound to the surface of alumina nanopores. Fluorescence intensity enhancement as high as 7 times is observed in nanopores in comparison to flat glass surface.      

Determination of the titanium content of human transferrin by inductively-coupled plasma-atomic-emission spectroscopy

We report a simple method that combines dialysis, as a purification method, with the multielement capability of ICP to determine the titanium-to-transferrin mole ratio at physiological pH, under buffer conditions. The method, by means of which titanium and transferrin are determined simultaneously, enabled us to assess the binding capacities of different titanocene complexes. Figure Titanocene dichloride     

Bienzyme sensors based on novel polymethylferrocenyl dendrimers

Amperometric bienzyme electrodes with horseradish peroxidase (HRP) and glucose oxidase (GOx) co-immobilized on polymethylferrocenyl dendrimers deposited onto platinum electrodes have been used for determination of the hydrogen peroxide produced by the oxidase during the enzymatic reaction. The redox dendrimers consist of flexible poly(propylenimine) dendrimer cores functionalised with octamethylferrocenyl units. The effects of dendrimer generation, the thickness of the dendrimer layer, substrate concentration, interferences, and reproducibility on the response of the sensors were investigated. The new bienzyme biosensors respond to substrate at work potential values between 200 and 50 mV (vs. SCE), have good sensitivity, and are resistant to interferences. Figure     

Updated estimates of the selenomethionine content of NIST wheat reference materials by GC–IDMS

Updated estimates of the selenomethionine content of four NIST wheat reference materials have been obtained by use of a revised gas chromatography–stable-isotope dilution mass spectrometric method. The revised method makes use of digestion with methanesulfonic acid, which enables more complete recovery of endogenous selenomethionine than was previously achieved by overnight denaturing treatment in 0.1 mol L⁻¹ HCl. The NIST wheat reference materials each contain approximately 55% of their total Se content as selenomethionine. Information about forms of Se in reference materials adds value to these materials in Se speciation studies. Estimates of selenomethionine content are also provided for other wheat samples, including several grown under conditions of exposure to high Se levels. These samples also contain approximately 55% of their total Se content as selenomethionine. The consistent level of 55% of total selenium occurring in the form of selenomethionine when the total selenium content varies by a factor of 500 is suggestive of an active mechanism of incorporation of selenium into wheat grain. Figure Selenomethionine content of wheat samples     

Development and characterization of an integrated silicon micro flow cytometer

This paper describes an innovative integrated micro flow cytometer that presents a new arrangement for the excitation/detection system. The sample liquid, containing the fluorescent marked particles/cells under analysis, is hydrodynamically squeezed into a narrow stream by two sheath flows so that the particles/cells flow individually through a detection region. The detection of the particles/cells emitted fluorescence is carried out by using a collection fiber placed orthogonally to the flow. The device is based on silicon hollow core antiresonant reflecting optical waveguides (ARROWs). ARROW geometry allows one to use the same channel to guide both the sample stream and the fluorescence excitation light, leading to a simplification of the optical configuration and to an increase of the signal-to-noise ratio. The integrated micro flow cytometer has been characterized by using biological samples marked with standard fluorochromes. The experimental investigation confirms the success of the proposed microdevice in the detection of cells. An erratum to this article can be found at     

Capillary HPLC–ICP MS mapping of selenocompounds in spots obtained from the 2-D gel electrophoresis of the water-soluble protein fraction of selenized yeast

A method based on ICP collision-cell MS detection in capillary HPLC was developed to gain an insight into the purity and identity of selenium-containing proteins separated by 1-D and 2-D electrophoresis. The bands and spots obtained after the separation of water-soluble proteins in selenized yeast were digested with trypsin prior to chromatography. Selenium could be detected down to the subpicogram level. The method, assisted by information obtained by MALDI TOF MS on the 5000 Da cut-off fraction, permitted the purity of bands and spots to be estimated and the efficiency of tryptic digestion and the quantity of selenium present in individual peptides to be evaluated. Owing to the high sensitivity and the lack of matrix suppression effects, the method provided chromatograms with signal-to-noise ratios of 10–1000 in conditions where the common ES Q–TOF MS detection failed.      

31P NMR study on the autophosphorylation of insulin receptors in the plasma membrane

A nonradioactive ³¹P nuclear magnetic resonance (NMR) spectroscopy protocol has been developed and used to investigate in vitro autophosphorylation of insulin receptors. Optimum experimental conditions have been explored, and the effects of Mn²⁺ and phosphocreatine (PCr) on the determination of the phosphorylation reaction have been assayed. The method was used to monitor the time courses of the phosphorylation reaction in solution. The results from this NMR study were in agreement with observations of insulin receptor phosphorylation made by using Western blotting.      

SPME in environmental analysis

Recent advances in the use of solid-phase microextraction (SPME) in environmental analysis, including fiber coatings, derivatization techniques, and in-tube SPME, are reviewed in this article. Several calibration methods for SPME, including traditional calibration methods, the equilibrium extraction method, the exhaustive extraction method, and several diffusion-based calibration methods, are presented. Recent developed SPME devices for on-site sampling and several applications of SPME in environmental analysis are also introduced.      

Elucidation of n-butyl benzyl phthalate biodegradation using high-performance liquid chromatography and gas chromatography–mass spectrometry

n-Butyl benzyl phthalate (BBP) is an endocrine-disrupting chemical. A bacterium species capable of using BBP as the sole source of carbon and energy was isolated from mangrove sediment. Effects of BBP concentration, pH, temperature, and salinity on BBP biodegradation were studied. The optimum pH, temperature, and salinity for the BBP biodegradation were 7.0, 37°C, and 15 g L⁻¹, respectively. BBP was completely degraded within 6 days under optimum conditions, and the biodegradation of BBP could be fitted to a first-order kinetic model. The major metabolites of BBP biodegradation were identified as mono-butyl phthalate, mono-benzyl phthalate, phthalic acid, and benzoic acid by using high-performance liquid chromatography and gas chromatography–mass spectrometry. A preliminary metabolic pathway was proposed for the biodegradation of BBP.      

Recent advances in capillary electrophoretic analysis of individual cells

Because variability exists within populations of cells, single-cell analysis has become increasingly important for probing complex cellular environments. Capillary electrophoresis (CE) is an excellent technique for identifying and quantifying the contents of single cells owing to its small volume requirements and fast, efficient separations with highly sensitive detection. Recent progress in both whole-cell and subcellular sampling has allowed researchers to study cellular function in the areas of neuroscience, oncology, enzymology, immunology, and gene expression.      

Selective solid-phase extraction of bisphenol A using molecularly imprinted polymers and its application to biological and environmental samples

Molecularly imprinted polymers (MIPs) were prepared using bisphenol A (BPA) as a template by precipitation polymerization. The polymer that had the highest binding selectivity and ability was used as solid-phase extraction (SPE) sorbents for direct extraction of BPA from different biological and environmental samples (human serum, pig urine, tap water and shrimp). The extraction protocol was optimized and the optimum conditions were as follows: conditioning with 5 mL methanol–acetic acid (3:1), 5 mL methanol, 5 mL acetonitrile and 5 mL water, respectively, loading with 5 mL aqueous samples, washing with 1 mL acetonitrile, and eluting with 3 mL methanol. MIPs can selectively recognize, effectively trap and preconcentrate BPA over a concentration range of 2–20 μM. Recoveries ranged from 94.03 to 105.3 %, with a relative standard deviation lower than 7.9 %. Under the optimal condition, molecularly imprinted SPE recoveries of spiked human serum, pig urine, tap water and shrimp were 65.80, 82.32, 76.00 and 75.97 %, respectively, when aqueous samples were applied directly. Compared with C18 SPE, a better baseline, better high-performance liquid chromatography separation efficiency and higher recoveries were achieved after molecularly imprinted SPE.      

Impedimetric genosensors for the detection of DNA hybridization

Impedance spectroscopy is proposed as the transduction principle for detecting the hybridization of DNA complementary strands. In our experiments, different DNA oligonucleotides were used as model gene substances. The gene probe is first immobilized on a graphite-epoxy composite working electrode based genosensor. Detection principle is based on changes of impedance spectra of a redox marker, the ferro/ferricyanide couple, after hybridization with target DNA. Resistance offered to the electrochemical reaction serves as the working signal, allowing for an unlabelled gene assay.      

Fluoroquinolones in soil—risks and challenges

Fluoroquinolones (FQs) are among the most important antibacterial agents used in human and veterinary medicine. Because of the growing practice of adding manure and sewage sludge to agricultural fields these drugs end up in soils, where they can accumulate and have adverse effects on organisms. This paper presents an overview of recent developments in the determination of FQs in solid environmental matrices and describes the risks and challenges (persistence, fate, effects, and remediation) which result from their presence in soil. Figure Pathways into the environment for FQs     

Modì: a new mobile instrument for in situ double-pulse LIBS analysis

Laser-induced breakdown spectroscopy (LIBS) is a promising technique for in situ elemental analysis. A new mobile instrument for LIBS analysis, developed in a collaboration between Marwan Technology s.r.l. and the Applied Laser Spectroscopy Laboratory in Pisa, is presented, and some applications of it and results from it are outlined. The innovative experimental set-up, based on the use of two suitably retarded laser pulses and a standardless analysis procedure, which overcomes problems related to matrix effects, greatly improves the potential of this technique for accurate quantitative analysis.      

Nuclear magnetic resonance of mass-limited samples using small RF coils

Figure Schematic diagram of a typical arrangement used for hyphenating chemical microseparations (e.g. capillary HPLC, CE, or CEC) with microcoil NMR detection     

Sensor technology and its application in environmental analysis

Environmental analysis is one of the fundamental applications of chemical sensors. In this review we describe different sensor systems for the gas and liquid phases that have been tested either with real-life samples or in the field during the last five years. Most field sensors rely either on electrochemical or optical transducers. In the gas phase, systems have been proposed for analysis of oxides of nitrogen, carbon, and sulfur in air, and volatile organic compounds. In the liquid phase, most detection systems used for real-life samples detect heavy-metal ions or organic contamination, for example pesticides, organic solvents and polycyclic aromatic hydrocarbons. Figure Chemical sensors for real-life environmental applications Dedicated to Professor Ulrich Nickel on the occasion of his 65th birthday.     

Cation identity dependence of crown ether photonic crystal Pb<Superscript>2+</Superscript> sensing

We quantitatively modeled the volume phase transition of a hydrogel containing a crystalline colloidal array with a crown ether ligand which binds Pb²⁺. The hydrogel volume response and the wavelength diffracted depend on the Pb²⁺ concentration and on both the ionic strength and the valence of the nonbinding ionic species. We successfully modeled the response of this hydrogel Pb²⁺ sensor to ionic strength and the cation valence of the added salts. Figure Cation identity dependence of crown ether photonic crystal Pb⁺ sensing     

Improved online coupling of planar chromatography with electrospray mass spectrometry: extraction of zones from glass plates

A plunger-based extraction device for HPTLC/MS coupling, which was originally designed for extraction on TLC aluminum foils, was enhanced. The threefold modifications enabled extraction of analytes from glass-backed HPTLC/TLC plates after separation. A buffering of the plunger reduced the occurrence of leakage. The involvement of a torque screwdriver for the fixation resulted in a reproducible contact pressure and avoided breaking the glass plates. The employment of this device was also extended to plates with a layer thickness of 100 μm by reducing the height of the plunger’s cutting edge. Repeatability of the extraction from glass-backed plates, linearity of the signal obtained, and detection capability were shown to be comparable to the original device, which was only usable with aluminum foils. The influence of the elution solvent on the intensity of the MS signal was demonstrated to be a compromise between high elution power of the solvent and good solubility of the analyte in the elution solvent. The extraction device was employed for plates from different lots and for plates with different stationary phases thereby proving its general applicability in planar chromatography.