Polymerizable ionic liquid copolymer P(MMA-co-BVIm-Br) and its effect on the surface wettability of PVDF blend membranes

Polymerizable ionic liquid copolymer P(MMA-co-BVIm-Br) was synthesized by radical polymerization technique, and characterized by Fourier transform infrared spectrometry(FTIR), 1H Nuclear magnetic resonance(1H-NMR) and gel permeation chromatography(GPC). The resulting copolymer was used to prepare poly(vinylidene fluoride)(PVDF) blend membranes via a phase inversion method. The effects of the copolymer on the polymorphism, surface wettability and zeta potential(ζ) of the blend membranes were investigated by ATR-FTIR, contact angle instrument and zeta potential analyzer. Scanning electron microscopy(SEM and SEM-EDS) was also applied to investigate the morphology and the surface element changes of the fabricated membranes. The results indicated that P(MMA-co-BVIm-Br) copolymer existed on the surface of the membrane which made the blend membrane have a positive surface during the experimental p H range. The copolymer was also in favor of the formation of β crystal phase in PVDF membranes. The contact angle experiment indicated that P(MMA-co-BVIm-Br) copolymer could switch the wettability of the blend membranes from hydrophilic to hydrophobic by exchanging Br-anion with PF-6. Compared with pure PVDF membranes, the water flux and water recovery flux of the blend membranes were enhanced obviously. The results from the flux recovery ratio(FR) and total fouling ratio(Rt) all suggested that the blend membranes had good anti-fouling properties.     

Thermo-responsive and antifouling PVDF nanocomposited membranes based on PNIPAAm modified TiO2 nanoparticles

A novel hydrophilic nanocomposite additive(TiO2-g-PNIPAAm) was synthesized by the surface modification of titanium dioxide(TiO2) with N-isopropylacrylamide(NIPAAm) via "graft-from" technique. And the nanocomposite membrane of poly(vinylidene fluoride)(PVDF)/TiO2-g-PNIPAAm was fabricated by wet phase inversion. The graft degree was obtained by thermo-gravimetric analysis(TGA). Fourier transform infrared attenuated reflection spectroscopy(FTIR-ATR) and X-ray photoelectronic spectroscopy(XPS) characterization results suggested that TiO2-g-PNIPAAm nanoparticles segregated on membrane surface during the phase separation process. Scanning electron microscopy(SEM) was conducted to investigate the surface and cross-section of the modified membranes. The water contact angle measurements confirmed that TiO2-g-PNIPAAm nanoparticles endowed PVDF membranes better hydrophlilicity and thermo-responsive properties compared with those of the pristine PVDF membrane. The water contact angle decreased from 92.8° of the PVDF membrane to 61.2° of the nanocompostie membrane. Bovine serum albumin(BSA) static and dynamic adsorption experiments suggested that excellent antifouling properties of membranes was acquired after adding TiO2-gPNIPAAm. The maximum BSA adsorption at 40 °C was about 3 times than that at 23 °C. The permeation experiments indicated the water flux recover ratio and BSA rejection ratio were improved at different temperatures.     

Fabrication of Hydrophilic and Sponge-like PVDF/Brush-like Copolymer Blend Membranes Using Triethylphosphate as Solvent简

Porous PVDF blend membranes with good hydrophilicity and a symmetric structure were prepared by the phase inversion method using amphiphilic brush-like copolymers, P（MMA-r-PEGMA）, as hydrophilic additive and triethylphosphate （TEP） as solvent. P（MMA-r-PEGMA） was synthesized by radical polymerization in TEP. Then the obtained amphiphilic copolymer solution was mixed with PVDF and TEP to prepare the dope solution. The effects of P（MMA-r-PEGMA） content and coagulation composition on membrane morphologies were investigated using scanning electron microscopy （SEM）. The results demonstrated that, even blended with amphiphilic copolymers, a symmetric structure can be formed. Hollow fiber membranes with a mainly symmetric structure were also fabricated. The dry hollow fiber membranes showed good hydrophilicity, high flux and good rejection performance because of their hydrophilic surface and pores wall.     

PREPARATION OF EVOH MICROPOROUS MEMBRANES via THERMALLY INDUCED PHASE SEPARATION USING BINARY SOLVENTS

Microporous ethylene-vinyl alcohol copolymer （EVOH） flat membranes and hollow-fiber membranes with 38 mol% ethylene content were prepared via thermally induced phase separation （TIPS） using the mixture of 1,4-butanediol and poly（ethylene glycol）（PEG400） as diluents. Effects of the ratio of 1,4-butanediol to PEG400 on the phase diagrams, phase separation mechanism and membrane morphology were studied by small angle light scattering （SALS） measurements, differential scanning calorimetry （DSC）, and scanning ele~：tron microscopy （SEM）. It was found that by varying the composition of the binary solvent, the phase diagrams and membrane morphology can be controlled successfully. Moreover, the phase diagrams showed that broader regions of Liquid-Liquid （L-L） phase separation were obtained, as well as closer distances between L-L phase separation lines and Solid-Liquid （S-L） phase separation lines, Interconnected structures observed both in the flat membrane and hollow fiber membrane consist with the above results.     

INFLUENCE OF ALCOHOL-BASED NONSOLVENTS ON THE FORMATION AND MORPHOLOGY OF PVDF MEMBRANES IN PHASE INVERSION PROCESS

Through the preparation of PVDF membranes using various nonsolvent coagulation baths following the phase inversion process, the influence of alcohol-based nonsolvents on the formation and structure of PVDF membranes were investigated. The light scattering and light transmission measurements were used to characterize the equilibrium phase diagram and the gelation speed, respectively. The locations of the crystallization-induced gelation boundaries for various systems and precipitation processes were explained from the corresponding thermodynamic and kinetic parameters. It was found that the better affinity between alcohol-based nonsolvents and DMAc solvent caused the gelation boundaries further away from the PVDF-DMAc axis with the coagulation bath varying from water, methanol, ethanol to iso-propanol. Due to the lower exchange rate of DMAc and alcohols, the delayed demixing took place for the membrane-forming using alcohols as baths, and the delayed time became longer when the coagulation bath was changed from methanol, ethanol to iso-propanol. The characterization results of membranes indicate that the influence of nonsolvents on the phase diagram and the precipitation process are in agreement with those on the membrane morphology. The better thermodynamic stability and a low exchange diffusion rate of PVDF/DMAc/alcohols favor the liquid-solid phase separation in gelation process, and therefore yield the membranes with a porous upper surface, a particular bottom surface and symmetrical structure.     

PREPARATION OF POLYVINYLIDENE FLUORIDE／POLYVINYL DIMETHYLSILOXANE COMPOSITE HOLLOW FIBER MEMBRANES AND THEIR SEPARATION PROPERTIES

Microporous polyvinylidene fluoride (PVDF) hollow fibre membranes were spun using the dry-wet phase inversion method. By means of dip-coating technique, a uniform coating with thickness of around 5-12μm of polyvinyl dimethylsiloxane (PVDMS) was formed on the surface of porous PVDF hollow fibers. The structural parameters of PVDF substrate membrane were estimated by gas permeation test. Using N2/O2 as the medium, the separation properties of PVDMS-PVDF composite hollow fiber membranes were also evaluated experimentally. The experimental data of both permeability and selectivity are in good agreement with the theoretical results predicted by the presented pore-distribution model, in order to obtain the compact composite membrane free of defects by the dip-coating technique, the thickness of PVDMS skin must be higher than 5μm.     

Influence of Teflon Substrate on Crystallization and Enzymatic Degradation of Polymorphic Poly（butylene adipate）

Oriented and non-oriented Teflon films, which were found to have the same crystalline structure, but different surface morphologies, were used to sandwich poly(butylene adipate)(PBA) films during isothermal crystallization. It was found that both the Teflon surface structure and the PBA polymorphic structure are the determining factors to induce epitaxial crystallization. The oriented Teflon film was able to induce epitaxial crystallization of PBA α crystal, while the non-oriented Teflon did not induce any epitaxial crystallization of PBA. Epitaxial crystallization did not occurred for PBA β crystals between neither the oriented nor the non-oriented Teflon films. The enzymatic degradation rate of PBA films was not determined by the epitaxial crystallization, in fact it was still dependent on the polymorphic crystal structure of PBA. The morphological changes of PBA films after enzymatic degradation confirmed again that the epitaxial crystallization only occurred for the PBA film with α crystal structure which was produced by being sandwiched between oriented Teflon films, and it happened only on the surface of PBA films.     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes:Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile （PAN） and an additive of polyvinylpyrrolidone （PVP）, which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm2 and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.     

Excellent hydrophilic and anti-bacterial fouling PVDF membrane based on ag nanoparticle self-assembled PCBMA polymer brush

A silver nanoparticles-poly(carboxybetaine methacrylate)(AgNPs-PCBMA) nanocomposite was prepared on poly(vinylidene fluoride)(PVDF) membrane surface to improve its hydrophilicity and antifouling properties. Firstly, the PVDF membranes were grafted by PCBMA via physisorbed free radical grafting technique. Then Ag+ coordinated to the carbonyl group on PCBMA andsubsequently was reduced to silver nanoparticles. The hydrophilicity of the PVDF-gPCBMA/Ag membrane wasenhanced with the increasing fixed degree(FD) of AgNPs, and the original water contact angle of membrane was reduced to 33.97°. Additionally, water flux recovery ratio(FRR) andbovine serum albumin(BSA) rejection ratio of PVDF-g-PCBMA/AgNPs membrane wereimproved from 52% to 93.32% and 28.12% to 91.12%, respectively. Further, the PVDF-g-PCBMA/AgNPs membranes exhibited the more pronounced inhibition zone. The study demonstrated that compared with pure AgNPs or the PCBMA polymer brush, the synergistic effect of PCBMA and AgNPs made PVDF membranes havebetter hydrophilicity and anti-bacterialperformances.     

Preparation of high density polyethylene/polyethylene-block-poly(ethylene glycol) copolymer blend porous membranes via thermally induced phase separation process and their properties

<正>High density polyethylene(HDPE)/polyethylene-block-poly(ethylene glycol)(PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation(TIPS) process using diphenyl ether(DPE) as diluent.The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry(DSC).By varying the content of PE-b-PEG,the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy(SEM) and wide angle X-ray diffraction(WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis,Fourier transform infrared spectroscopy-attenuated total reflection(FTIR-ATR) and X-ray photoelectron spectroscopy(XPS).Water contact angle,static protein adsorption and water flux experiments were used to evaluate the hydrophilicity,antifouling and water permeation properties of the membranes.It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes.In the investigated range of PE-b-PEG content,the PEG blocks could not aggregate into obviously separated domains in membrane matrix.More importantly,PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation,but also enrich at the membrane surface layer.Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity,protein absorption resistance and water permeation properties,which would be substantially beneficial to HDPE membranes for water treatment application.     

Supercritical fluid extraction of oxindole alkaloids from Uncaria tormentosa

Supercritical fluid extraction of oxindole alkaloids from Uncaria Tormentosa is described. The extraction was performed with supercritical carbon dioxide alone and with supercritical carbon dioxide modified with 10% metanol, and the extracts were analyzed by GC/MS and HPLC/MS.     

Supercritical fluid extraction of sinomenine from Sinomenium acutum (Thumb) Rehd et Wils

Supercritical carbon dioxide, with and without a methanol modifier, was used to extract sinomenine from Sinomenium acutum (Thumb) Rehd et Wils. Sinomenine determinations were carried out using high-performance liquid chromatography (HPLC). The results show that the yield obtained after 2.5 h extraction with methanol-modified supercritical carbon dioxide was the highest (7.47 mg/g), while that obtained with only supercritical carbon dioxide was the lowest (0.17 mg/g). The recovery obtained with supercritical carbon dioxide, with and without a methanol modifier, could not be increased greatly by the method of the alkalinization of sample. Higher recoveries were obtained than extraction using methanol in Soxhlet extractor.     

超临界二氧化碳-高分子化学中的绿色介质

介绍了超临界二氧化碳的特点，综述了近期以超临界二氧化碳为溶剂的高分子聚合和高分子化学反应及其应用前景。指出超临界CO2在聚合反应中能作为传统有机溶剂的替代溶剂。     

Supercritical fluid extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin from sediment samples

Supercritical fluid extraction (SFE) is a promising technique for the extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) from environmental matrices such as contaminated sediments. The ability of SFE to solubilize many organic contaminants is well documented in industrial processes but its analytical applications were exploited just recently. In this study supercritical carbon dioxide and nitrous oxide and their mixtures with 2% methanol were used to extract 2,3,7,8-TCDD from aquatic sediments. An attractive feature of this process is that the carbon dioxide, being a virtually inert fluid, leaves no solvent residue on the processed sediment. Almost 100% of the 2,3,7,8-TCDD can be extracted from a sediment spiked with 200 μg/kg 2,3,7,8-TCDD in 30 minutes by using supercritical carbon dioxide + 2% methanol. Cleanup procedure is compared with the Soxhlet extraction procedure currently used as a standard method for extracting dioxins from sediment samples.     

Evaluation of dithiocarbamates and beta-diketones as chelating agents in supercritical fluid extraction of Cd, Pb, and Hg from solid samples

The use of four dithiocarbamates and three fluorinated β-diketones as potential chelating agents for three transition metal ions (Cd²⁺, Pb²⁺, and Hg²⁺) extracted from spiked sand and filter paper samples by supercritical fluid extraction (SFE) was investigated. The extractions were performed at 45°C and 250 atm for spiked sand samples and at 60°C and 200 atm for filter paper samples using supercritical carbon dioxide modified with 5% methanol. At 250 atm and using carbon dioxide modified with 5% methanol, the recoveries of Cd²⁺, Pb²⁺, and Hg²⁺ ions from spiked sand samples were 95% with lithium bis(trifluoroethyl)dithiocarbamate (LiFDDC) as the chelating agent; they ranged from 83–97% with diethylammonium diethyldithiocarbamate and from 87–97% with sodium di-ethyldithiocarbamate as chelating agents, and from 68–96% with trifluoracetylacetone, hexafluoroacetylacetone, and thenoylfluoroacetone as chelating agents. Ammonium pyrrolidinedithiocarbamate was not effective in the chelation SFE of Cd²⁺, Pb²⁺, and Hg²⁺ ions from either spiked sand or spiked filter paper samples under the extraction conditions used. Supercritical carbon dioxide alone gave consistently lower analyte recoveries than supercritical carbon dioxide modified with 5% methanol. The results suggest that the solubility of the metal chelate in the supercritical fluid plays a more important role than the solubility of the chelating agent in the supercritical fluid, as long as sufficient chelating agent is present in the fluid phase. Fluorination of the chelating agent, as in the case of LiFDDC, increases the solubility of the metal chelate, and subsequently enhances the extraction efficiency for the metal ions.     

CO2/离子液体体系热力学性质的分子动力学模拟

超临界CO2和离子液体(ILs)是两种绿色溶剂. 离子液体可以溶解超临界CO2, 而超临界CO2不能溶解离子液体. 由此设计构成的CO2/IL二元系统, 同时具备了超临界CO2和离子液体的许多优点: 既可以降低离子液体的粘度, 还便于相分离, 是新型的耦合绿色溶剂. 其物理化学性质对于设计反应、分离等过程非常重要. 因此, 本文以CO2/IL二元系统为研究对象, 通过选择合适的分子力场和系综, 运用分子动力学(MD)模拟方法研究了CO2/[bmim][PF6]、CO2/[bmim][NO3]等体系的热力学性质. 结果表明, CO2对ILs膨胀度的影响非常小, 当CO2摩尔分数为0.5时, ILs膨胀仅为15%. CO2/ILs的扩散系数远小于CO2膨胀甲醇、乙醇溶液的扩散系数. 随着CO2含量的增加, ILs的扩散系数提高, 粘度显著下降, 表明CO2能有效地改善ILs扩散性, 减小其粘度. 因此CO2可用以改善离子液体溶剂体系的传递特性, 增强反应分离过程在其中的进行.     

超临界(压缩)二氧化碳介质中的选择氧化*

由于超临界二氧化碳（SCCO₂）具有稳定、安全、不燃、清洁无毒、粘度小、扩散快、可压缩的特殊性质,所以使得超临界二氧化碳非常适合作为催化反应的绿色溶剂.除此之外,多种气体在超临界二氧化碳中的溶解度很高,这对于那些受传质阻碍和易引起安全隐患的气相反应来讲,使用SCCO₂作为替代的反应溶剂具有重要的价值。值得指出的是：如果选择超临界二氧化碳作为氧化反应的溶剂,其自身不会发生反应而产生副产物,从而容易得到清洁的产物。本文主要讨论了超临界二氧化碳作为反应介质对醇、烯烃和烷烃等选择氧化反应的影响,通过与传统溶剂比较可以看出超临界二氧化碳作为氧化反应溶剂的优势,对近几年来以分子氧为氧化剂,以超临界二氧化碳为介质的催化选择氧化的反应体系作了综述,并对未来的发展提出了展望。     

Supercritical fluid extraction of kava lactones from Piper methysticum (kava) herb

Supercritical fluid extraction of kava lactones from Piper methysticum Forst. herb is described here. The extraction was performed with supercritical carbon dioxide alone and supercritical carbon dioxide modified with 15% ethanol, and the extracts were analyzed by gas chromatography/mass spectrometry. Seven lactones including: 7,8-dihydrokavain; kavain; 5,6-dehydrokavain; 5, 6, 7, 8-tetrahydroyangonin; dihydromethysticin; yangonin; and methysticin were the major constituents in the SFE extract.     

Extraction of paeonol from Jisheng Shenqi Wan using supercritical fluid extraction

Supercritical carbon dioxide with or without methanol and 95% ethanol modifiers was used to extract paeonol from the pills of Jisheng Shenqi Wan and high-performance liquid chromatography (HPLC) was used to analyze the extract. The effect of temperature and pressure on the yield of paeonol was tested. The results show that the recovery of paeonol was improved by adding a polar modifier, such as methanol and 95% ethanol in supercritical fluid. The yield obtained after 120 min extraction with 95% ethanol modified-supercritical carbon dioxide was the highest (1.51, w/w at 60 degrees C and 400 bar), while that obtained with supercritical carbon dioxide only at 40 degrees C was the lowest from 0.67 to 0.83 over a range of 200-600 bar.     

Alkoxycarbonylation of Allyl Bromide over Palladium Catalyst in Different Reaction Mediums

Supercritical carbon dioxide(scCO2)and its subcritical analogue are now widely used as environ mentally-friendly substitutes of conventional organic solvents in chemical synthesis[1-4]